Motivation:
JdkZlibDecoder fails to decode because the length of the output buffer is not calculated correctly.
This can cause an IndexOutOfBoundsException or data-corruption when the PooledByteBuffAllocator is used.
Modifications:
Correctly calculate the length
Result:
No more IndexOutOfBoundsException or data-corruption.
Motivation:
Allow to make use of our new FastThreadLocal whereever possible
Modification:
Make use of an array to store FastThreadLocals and so allow to also use it in PooledByteBufAllocator that is instanced by users.
The maximal size of the array is configurable per system property to allow to tune it if needed. As default we use 64 entries which should be good enough.
Result:
More flexible usage of FastThreadLocal
Motivation:
Provide a faster ThreadLocal implementation
Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);
Result:
Improved performance
Motivation:
At the moment the HashedWheelTimer will only remove the cancelled Timeouts once the HashedWheelBucket is processed again. Until this the instance will not be able to be GC'ed as there are still strong referenced to it even if the user not reference it by himself/herself. This can cause to waste a lot of memory even if the Timeout was cancelled before.
Modification:
Add a new queue which holds CancelTasks that will be processed on each tick to remove cancelled Timeouts. Because all of this is done only by the WorkerThread there is no need for synchronization and only one extra object creation is needed when cancel() is executed. For addTimeout(...) no new overhead is introduced.
Result:
Less memory usage for cancelled Timeouts.
Motivation:
Each of DefaultChannelPipeline instance creates an head and tail that wraps a handler. These are used to chain together other DefaultChannelHandlerContext that are created once a new ChannelHandler is added. There are a few things here that can be improved in terms of memory usage and initialization time.
Modification:
- Only generate the name for the tail and head one time as it will never change anyway
- Rename DefaultChannelHandlerContext to AbstractChannelHandlerContext and make it abstract
- Create a new DefaultChannelHandlerContext that is used when a ChannelHandler is added to the DefaultChannelPipeline
- Rename TailHandler to TailContext and HeadHandler to HeadContext and let them extend AbstractChannelHandlerContext. This way we can save 2 object creations per DefaultChannelPipeline
Result:
- Less memory usage because we have 2 less objects per DefaultChannelPipeline
- Faster creation of DefaultChannelPipeline as we not need to generate the name for the head and tail
Motivation:
According to RFC2616 section 19, boundary string could be quoted, but
currently the PostRequestDecoder does not support it while it should.
Modifications:
Once the boundary is found, one check is made to verify if the boundary
is "quoted", and if so, it is "unqoted".
Note: in following usage of this boundary (as delimiter), quote seems no
more allowed according to the same RFC, so the reason that only the
boundary definition is corrected.
Result:
Now the boundary could be whatever quoted or not. A Junit test case
checks it.
Motivation:
When an attribute is ending with an odd number of CR (0x0D), the decoder
add an extra CR in the decoded attribute and should not.
Modifications:
Each time a CR is detected, the next byte was tested to be LF or not. If
not, in a number of places, the CR byte was lost while it should not be.
When a CR is detected, if the next byte is not LF, the CR byte should be
saved as the position point to the next byte (not LF). When a CR is
detected, if there is not yet other available bytes, the position is
reset to the position of CR (since a LF could follow).
A new Junit test case is added, using DECODER and variable number of CR
in the final attribute (testMultipartCodecWithCRasEndOfAttribute).
Result:
The attribute is now correctly decoded with the right number of CR
ending bytes.
Motivation:
Our Unsafe*ByteBuf implementation always invert bytes when the native ByteOrder is LITTLE_ENDIAN (this is true on intel), even when the user calls order(ByteOrder.LITTLE_ENDIAN). This is not optimal for performance reasons as the user should be able to set the ByteOrder to LITTLE_ENDIAN and so write bytes without the extra inverting.
Modification:
- Introduce a new special SwappedByteBuf (called UnsafeDirectSwappedByteBuf) that is used by all the Unsafe*ByteBuf implementation and allows to write without inverting the bytes.
- Add benchmark
- Upgrade jmh to 0.8
Result:
The user is be able to get the max performance even on servers that have ByteOrder.LITTLE_ENDIAN as their native ByteOrder.
Motivation:
MpscLinkedQueue has various issues:
- It does not work without sun.misc.Unsafe.
- Some field names are confusing.
- Node.tail does not refer to the tail node really.
- The tail node is the starting point of iteration. I think the tail
node should be the head node and vice versa to reduce confusion.
- Some important methods are not implemented (e.g. iterator())
- Not serializable
- Potential false cache sharing problem due to lack of padding
- MpscLinkedQueue extends AtomicReference and thus exposes various
operations that mutates the internal state of the queue directly.
Modifications:
- Use AtomicReferenceFieldUpdater wherever possible so that we do not
use Unsafe directly. (e.g. use lazySet() instead of putOrderedObject)
- Extend AbstractQueue to implement most operations
- Implement serialization and iterator()
- Rename tail to head and head to tail to reduce confusion.
- Rename Node.tail to Node.next.
- Fix a leak where the references in the removed head are not cleared
properly.
- Add Node.clearMaybe() method so that the value of the new head node
is cleared if possible.
- Add some comments for my own educational purposes
- Add padding to the head node
- Add FullyPaddedReference and RightPaddedReference for future reuse
- Make MpscLinkedQueue package-local so that a user cannot access the
dangerous yet public operations exposed by the superclass.
- MpscLinkedQueue.Node becomes MpscLinkedQueueNode, a top level class
Result:
- It's more like a drop-in replacement of ConcurrentLinkedQueue for the
MPSC case.
- Works without sun.misc.Unsafe
- Code potentially easier to understand
- Fixed leak (related: #2372)
Motivation:
At the moment ChannelFlushPromiseNotifier.add(....) takes an int value for pendingDataSize, which may be too small as a user may need to use a long. This can for example be useful when a user writes a FileRegion etc. Beside this the notify* method names are kind of missleading as these should not contain *Future* because it is about ChannelPromises.
Modification:
Add a new add(...) method that takes a long for pendingDataSize and @deprecated the old method. Beside this also @deprecated all *Future* methods and add methods that have *Promise* in the method name to better reflect usage.
Result:
ChannelFlushPromiseNotifier can be used with bigger data.
Motivation:
Currently OkResponseHandler returns a DefaultHttpResponse which is not
correct and it should be returning complete http response.
Modifications:
Updated OkResponseHandler to return an instance of
DefaultFullHttpResponse.
Result:
It is not possible to add compression to the example without getting any
errors.
Motivation:
ChannelTrafficShapingHandler may corrupt inbound data stream by
scheduling the fireChannelRead event.
Modification:
Always call fireChannelRead(...) and only suspend reads after it
Result:
No more data corruption
Motivation:
When running Netty on a container environment, the container will often
complain about the lingering threads such as the worker threads of
ThreadDeathWatcher and GlobalEventExecutor. We should provide an
operation that allows a use to wait until such threads are terminated.
Modifications:
- Add awaitInactivity()
- (misc) Fix typo in GlobalEventExecutorTest
- (misc) Port ThreadDeathWatch's CAS-based thread life cycle management
to GlobalEventExecutor
Result:
- Fixes#2084
- Less overhead on task submission of GlobalEventExecutor
Motivation:
PooledByteBufAllocator's thread local cache and
ReferenceCountUtil.releaseLater() are in need of a way to run an
arbitrary logic when a certain thread is terminated.
Modifications:
- Add ThreadDeathWatcher, which spawns a low-priority daemon thread
that watches a list of threads periodically (every second) and
invokes the specified tasks when the associated threads are not alive
anymore
- Start-stop logic based on CAS operation proposed by @tea-dragon
- Add debug-level log messages to see if ThreadDeathWatcher works
Result:
- Fixes#2519 because we don't use GlobalEventExecutor anymore
- Cleaner code
Motivation:
At the moment MessageToMessageEncoder uses ctx.write(msg) when have more then one message was produced. This may produce more GC pressure then necessary as when the original ChannelPromise is a VoidChannelPromise we can safely also use one when write messages.
Modifications:
Use VoidChannelPromise when the original ChannelPromise was of this type
Result:
Less object creation and GC pressure
Motivation:
The current DefaultAttributeMap cause an infinite-loop when the user removes an attribute and create the same attribute again. This regression was introduced by c3bd7a8ff1.
Modification:
Correctly break out loop
Result:
No infinite-loop anymore.
Motivation:
If we make allocateRun/SubpageSimple() always try the left node first and make allocateRun/Subpage() always tries the right node first, it is more likely that allocateRun/Subpage() will find a node with ST_UNUSED sooner.
Modifications:
- Make allocateRunSimple() and allocateSubpageSimple() always try the left node first.
- Make allocateRun() and allocateSubpage() always try the right node first.
- Remove randome
Result:
We get the same performance without using random numbers.
Motivation:
We still have a room for improvement in PoolChunk.allocateRun() and
Subpage.allocate().
Modifications:
- Unroll the recursion in PoolChunk.allocateRun()
- Subpage.allocate() makes use of the 'nextAvail' value set by previous
free().
Result:
- PoolChunk.allocateRun() optimization yields 10%+ improvements in
allocation throughput for non-subpage allocations.
- Subpage.allocate() optimization makes the subpage allocations for
tiny buffers as fast as non-tiny buffers even when the pageSize is
huge (e.g. 1048576) because it doesn't need to perform a linear search
in most cases.
Motivation:
Allocating a single buffer and releasing it repetitively for a benchmark will not involve the realistic execution path of the allocators.
Modifications:
Keep the last 8192 allocations and release them randomly.
Result:
We are now getting the result close to what we got with caliper.
Motivation:
On some ill-configured systems, InetAddress.getLocalHost() fails. NioSocketChannelTest calls java.net.Socket.connect() and it internally invoked InetAddress.getLocalHost(), which causes the test failures in NioSocketChannelTes on such an ill-configured system.
Modifications:
Use NetUtil.LOCALHOST explicitly.
Result:
NioSocketChannelTest should not fail anymore.
Motivation:
maven-antrun-plugin does not redirect stdin, and thus it's impossible to
run interactive examples such as securechat-client and telnet-client.
org.codehaus.mojo:exec-maven-plugin redirects stdin, but it buffers
stdout and stderr, and thus an application output is not flushed timely.
Modifications:
Deploy a forked version of exec-maven-plugin which flushes output
buffers in a timely manner.
Result:
Interactive examples work. Launches faster than maven-antrun-plugin.
Motivation:
The examples have not been updated since long time ago, showing various
issues fixed in this commit.
Modifications:
- Overall simplification to reduce LoC
- Use system properties to get options instead of parsing args.
- Minimize option validation
- Just use System.out/err instead of Logger
- Do not pass config as parameters - just access it directly
- Move the main logic to main(String[]) instead of creating a new
instance meaninglessly
- Update netty-build-21 to make checkstyle not complain
- Remove 'throws Exception' clause if possible
- Line wrap at 120 (previously at 80)
- Add an option to enable SSL for most examples
- Use ChannelFuture.sync() instead of await()
- Use System.out for the actual result. Use System.err otherwise.
- Delete examples that are not very useful:
- applet
- websocket/html5
- websocketx/sslserver
- localecho/multithreaded
- Add run-example.sh which simplifies launching an example from command
line
- Rewrite FileServer example
Result:
Shorter and simpler examples. A user can focus more on what it actually
does than miscellaneous stuff. A user can launch an example very
easily.
Motivation:
When (listeners == null && lateListeners == null) and (stackDepth >= MAX_LISTENER_STACK_DEPTH), the listener is not notified at all. The discard client does not work.
Modification:
Make sure to submit the notification task.
Result:
The discard client works again and all listeners are notified.
Motivation:
- dependencyVersionsDir property is not resolved during the build
process. The build doesn't fail because of this, but it creates an
ugly directory.
- All-in-one JAR contains libnetty-tcnative.so, which is not part of the
all-in-one JAR.
Modifications:
- Fix an incorrect property name
(dependencyVersionDir -> dependencyVersionsDir)
- Exclude libnetty-tcnative.so
- Remove unnecessary includes in source expanding configuration
Result:
- Cleaner pom.xml
- We do not ship libnetty-tcnative.so in all-in-one JAR anymore, which
is correct, because strictly speaking the native library belongs to
org.apache.tomcat.jni package.
Motivation:
exec-maven-plugin does not flush stdout and stderr, making the console
output from the examples invisible to users
Modification:
Use maven-antrun-plugin instead
Result:
A user sees the output from the examples immediately.
Motivation:
According to TLS ALPN draft-05, a client sends the list of the supported
protocols and a server responds with the selected protocol, which is
different from NPN. Therefore, ApplicationProtocolSelector won't work
with ALPN
Modifications:
- Use Iterable<String> to list the supported protocols on the client
side, rather than using ApplicationProtocolSelector
- Remove ApplicationProtocolSelector
Result:
Future compatibility with TLS ALPN
Motivation:
- OpenSslEngine and JDK SSLEngine (+ Jetty NPN) have different APIs to
support NextProtoNego extension.
- It is impossible to configure NPN with SslContext when the provider
type is JDK.
Modification:
- Implement NextProtoNego extension by overriding the behavior of
SSLSession.getProtocol() for both OpenSSLEngine and JDK SSLEngine.
- SSLEngine.getProtocol() returns a string delimited by a colon (':')
where the first component is the transport protosol (e.g. TLSv1.2)
and the second component is the name of the application protocol
- Remove the direct reference of Jetty NPN classes from the examples
- Add SslContext.newApplicationProtocolSelector
Result:
- A user can now use both JDK SSLEngine and OpenSslEngine for NPN-based
protocols such as HTTP2 and SPDY
Motivation:
Mac OS X ships Bash 3, and it does not have an associative array
(declare -A).
Modifications:
Do not use an associative array.
Result:
Can run examples on Mac OS X using run-example.sh
Motivation:
- There's no way to pass an argument to an example.
- Assigning a Maven profile for each example is an overkill.
It makes the pom.xml crowded.
Modifications:
- Remove example profiles from example/pom.xml
- Keep the list of examples in run-example.sh
- run-example.sh passes all options to exec-maven-plugin.
For example, we can now do this:
./run-example.sh -Dssl -Dport=443 http-server
Result:
- It's much easier to add a new example and provide an easy way to
launch it.
- We can still pass an arbitrary argument to the example being launched.
(I'll update all examples to make them get their options from system
properties rather than from args[].
Motivation:
Build fails with JDK 8 because npn-boot does not work with JDK 8
Modifications:
Do not specify bootclasspath when on JDK 8
Result:
Build is green again.
Motivation:
Due to a known problem[1] of maven-compiler-plugin, our build always
compiles everything from scratch, which is waste of time.
Modifications:
Exclude package-info.java from the source list.
Result:
Much shorter build time.
[1]: https://jira.codehaus.org/browse/MCOMPILER-205
Motivation:
- example/pom.xml has quite a bit of duplication.
- We expect that we depend on npn-boot in more than one module in the
near future. (e.g. handler, codec-http, and codec-http2)
Modification:
- Deduplicate the profiles in example/pom.xml
- Move the build configuration related with npn-boot to the parent pom.
- Add run-example.sh that helps a user launch an example easily
Result:
- Cleaner build files
- Easier to add a new example
- Easier to launch an example
- Easier to run the tests that relies on npn-boot in the future
