Motivation:
According to TLS ALPN draft-05, a client sends the list of the supported
protocols and a server responds with the selected protocol, which is
different from NPN. Therefore, ApplicationProtocolSelector won't work
with ALPN
Modifications:
- Use Iterable<String> to list the supported protocols on the client
side, rather than using ApplicationProtocolSelector
- Remove ApplicationProtocolSelector
Result:
Future compatibility with TLS ALPN
Motivation:
- OpenSslEngine and JDK SSLEngine (+ Jetty NPN) have different APIs to
support NextProtoNego extension.
- It is impossible to configure NPN with SslContext when the provider
type is JDK.
Modification:
- Implement NextProtoNego extension by overriding the behavior of
SSLSession.getProtocol() for both OpenSSLEngine and JDK SSLEngine.
- SSLEngine.getProtocol() returns a string delimited by a colon (':')
where the first component is the transport protosol (e.g. TLSv1.2)
and the second component is the name of the application protocol
- Remove the direct reference of Jetty NPN classes from the examples
- Add SslContext.newApplicationProtocolSelector
Result:
- A user can now use both JDK SSLEngine and OpenSslEngine for NPN-based
protocols such as HTTP2 and SPDY
Motivation:
- There's no way to pass an argument to an example.
- Assigning a Maven profile for each example is an overkill.
It makes the pom.xml crowded.
Modifications:
- Remove example profiles from example/pom.xml
- Keep the list of examples in run-example.sh
- run-example.sh passes all options to exec-maven-plugin.
For example, we can now do this:
./run-example.sh -Dssl -Dport=443 http-server
Result:
- It's much easier to add a new example and provide an easy way to
launch it.
- We can still pass an arbitrary argument to the example being launched.
(I'll update all examples to make them get their options from system
properties rather than from args[].
Motivation:
Build fails with JDK 8 because npn-boot does not work with JDK 8
Modifications:
Do not specify bootclasspath when on JDK 8
Result:
Build is green again.
Motivation:
- example/pom.xml has quite a bit of duplication.
- We expect that we depend on npn-boot in more than one module in the
near future. (e.g. handler, codec-http, and codec-http2)
Modification:
- Deduplicate the profiles in example/pom.xml
- Move the build configuration related with npn-boot to the parent pom.
- Add run-example.sh that helps a user launch an example easily
Result:
- Cleaner build files
- Easier to add a new example
- Easier to launch an example
- Easier to run the tests that relies on npn-boot in the future
Motivation:
It's useful to have netty-tcnative dependency in netty-example because
we can play with OpenSslEngine from our IDE.
Modifications:
Add netty-tcnative to example/pom.xml
Motivation:
Some users already use an SSLEngine implementation in finagle-native. It
wraps OpenSSL to get higher SSL performance. However, to take advantage
of it, finagle-native must be compiled manually, and it means we cannot
pull it in as a dependency and thus we cannot test our SslHandler
against the OpenSSL-based SSLEngine. For an instance, we had #2216.
Because the construction procedures of JDK SSLEngine and OpenSslEngine
are very different from each other, we also need to provide a universal
way to enable SSL in a Netty application.
Modifications:
- Pull netty-tcnative in as an optional dependency.
http://netty.io/wiki/forked-tomcat-native.html
- Backport NativeLibraryLoader from 4.0
- Move OpenSSL-based SSLEngine implementation into our code base.
- Copied from finagle-native; originally written by @jpinner et al.
- Overall cleanup by @trustin.
- Run all SslHandler tests with both default SSLEngine and OpenSslEngine
- Add a unified API for creating an SSL context
- SslContext allows you to create a new SSLEngine or a new SslHandler
with your PKCS#8 key and X.509 certificate chain.
- Add JdkSslContext and its subclasses
- Add OpenSslServerContext
- Add ApplicationProtocolSelector to ensure the future support for NPN
(NextProtoNego) and ALPN (Application Layer Protocol Negotiation) on
the client-side.
- Add SimpleTrustManagerFactory to help a user write a
TrustManagerFactory easily, which should be useful for those who need
to write an alternative verification mechanism. For example, we can
use it to implement an unsafe TrustManagerFactory that accepts
self-signed certificates for testing purposes.
- Add InsecureTrustManagerFactory and FingerprintTrustManager for quick
and dirty testing
- Add SelfSignedCertificate class which generates a self-signed X.509
certificate very easily.
- Update all our examples to use SslContext.newClient/ServerContext()
- SslHandler now logs the chosen cipher suite when handshake is
finished.
Result:
- Cleaner unified API for configuring an SSL client and an SSL server
regardless of its internal implementation.
- When native libraries are available, OpenSSL-based SSLEngine
implementation is selected automatically to take advantage of its
performance benefit.
- Examples take advantage of this modification and thus are cleaner.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).
Modifications:
The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.
Result:
SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
Motivation:
Currently, there exists no example which shows how to use the memcache binary
protocol.
Modifications:
Add an example client and client handler to show how to utilize the binary
protocol in a memcache client with a simple interactive shell.
Result:
Users looking for an example can now start off with the provided one.
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.
Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.
Result:
Users are now able to configure multiple origins for CORS.
[https://github.com/netty/netty/issues/2346]
Motivation:
LocalEventLoopGroup and LocalEventLoop are not really special for LocalChannels. It can be used for other channel implementations as long as they don't require special handling.
Modifications:
- Add DefaultEventLoopGroup and DefaultEventLoop
- Deprecate LocalEventLoopGroup and make it extend DefaultEventLoopGroup
- Add DefaultEventLoop and remove LocalEventLoop
- Fix inspector warnings
Result:
- Better class names.
Merged WebSocketClient and WebSocketSslClient
Add private constructors to fix checkstyle errors.
More checkstyle madness.
made WebSocketClientRunner final
- Related issues: #1937#1938 and #1946
- Add InterfaceHttpPostRequestDecoder and Make HttpPostRequestDecoder implement it
- HttpPostRequestDecoder actually delegates itself to HttpPostStandardRequestDecoder or HttpPostMultipartRequestDecoder
- Remove IncompatibleDataDecoderException because it's not thrown anywhere now
- Move the version number to the parent pom's pluginManagement section
- Remove unnecessary system properties
- Increase the scope of execution from compile to runtime
Demonstrates the usage of SPDY from a client perspective. One can also
use a SPDY-enabled browser as a client, but it’s easier to understand
the internals of the protocol from a client point-of-view if you have
some code you can debug.
- Fixes#2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging. This is
more robust because some strict build tools fail to retrieve the
artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
- Fix a bug in DefaultProgressivePromise.tryProgress() where the notification is dropped
- Fix a bug in AbstractChannel.calculateMessageSize() where FileRegion is not counted
- HttpStaticFileServer example now uses zero copy file transfer if possible.
- write() now accepts a ChannelPromise and returns ChannelFuture as most
users expected. It makes the user's life much easier because it is
now much easier to get notified when a specific message has been
written.
- flush() does not create a ChannelPromise nor returns ChannelFuture.
It is now similar to what read() looks like.
- Remove channelReadSuspended because it's actually same with messageReceivedLast
- Rename messageReceived to channelRead
- Rename messageReceivedLast to channelReadComplete
We renamed messageReceivedLast to channelReadComplete because it
reflects what it really is for. Also, we renamed messageReceived to
channelRead for consistency in method names.
I must admit MesageList was pain in the ass. Instead of forcing a
handler always loop over the list of messages, this commit splits
messageReceived(ctx, list) into two event handlers:
- messageReceived(ctx, msg)
- mmessageReceivedLast(ctx)
When Netty reads one or more messages, messageReceived(ctx, msg) event
is triggered for each message. Once the current read operation is
finished, messageReceivedLast() is triggered to tell the handler that
the last messageReceived() was the last message in the current batch.
Similarly, for outbound, write(ctx, list) has been split into two:
- write(ctx, msg)
- flush(ctx, promise)
Instead of writing a list of message with a promise, a user is now
supposed to call write(msg) multiple times and then call flush() to
actually flush the buffered messages.
Please note that write() doesn't have a promise with it. You must call
flush() to get notified on completion. (or you can use writeAndFlush())
Other changes:
- Because MessageList is completely hidden, codec framework uses
List<Object> instead of MessageList as an output parameter.
- SimpleChannelInboundHandler now has a constructor parameter to let a
user decide to enable automatic message release. (the default is to
enable), which makes ChannelInboundConsumingHandler of less value.
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.
Memory consumption issue:
When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user. In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.
Memory footprint issue:
The old Netty 4 API decreased overall memory footprint by a great deal
in many cases. It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read. Instead, it
created a new buffer for each handler in a pipeline. This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.
Changes:
All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.
To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:
- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
- Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
- Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
- Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
- Similar to ReceiveBufferSizePredictor in Netty 3
- Some existing configuration properties such as
DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf
This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
- Fixes#1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
shutdownGracefully() provides two optional parameters that give more
control over when an executor has to be shut down.
- Related issue: #1307
- Add shutdownGracefully(..) and isShuttingDown()
- Deprecate shutdown() / shutdownNow()
- Replace lastAccessTime with lastExecutionTime and update it after task
execution for accurate quiet period check
- runAllTasks() and runShutdownTasks() update it automatically.
- Add updateLastExecutionTime() so that subclasses can update it
- Add a constructor parameter that tells not to add an unncessary wakeup
task in execute() if addTask() wakes up the executor thread
automatically. Previously, execute() always called wakeup() after
addTask(), which often caused an extra dummy task in the task queue.
- Use shutdownGracefully() wherever possible / Deprecation javadoc
- Reduce the running time of SingleThreadEventLoopTest from 40s to 15s
using custom graceful shutdown parameters
- Other changes made along with this commit:
- takeTask() does not throw InterruptedException anymore.
- Returns null on interruption or wakeup
- Make sure runShutdownTasks() return true even if an exception was
raised while running the shutdown tasks
- Remove unnecessary isShutdown() checks
- Consistent use of SingleThreadEventExecutor.nanoTime()
Replace isWakeupOverridden with a constructor parameter
This change also introduce a few other changes which was needed:
* ChannelHandler.beforeAdd(...) and ChannelHandler.beforeRemove(...) were removed
* ChannelHandler.afterAdd(...) -> handlerAdded(...)
* ChannelHandler.afterRemoved(...) -> handlerRemoved(...)
* SslHandler.handshake() -> SslHandler.hanshakeFuture() as the handshake is triggered automatically after
the Channel becomes active
- Now works without the transport package
- Renamed TransferFuture to ProgressiveFuture and ChannelProgressiveFuture / same for promises
- ProgressiveFutureListener now extends GenericProgressiveFutureListener and GenericFutureListener (add/removeTransferListener*() were removed)
- Renamed DefaultEventListeners to DefaultFutureListeners and only accept GenericFutureListeners
- Various clean-up
- Fixes#1229
- Primarily written by @normanmaurer and revised by @trustin
This commit removes the notion of unfolding from the codec framework
completely. Unfolding was introduced in Netty 3.x to work around the
shortcoming of the codec framework where encode() and decode() did not
allow generating multiple messages.
Such a shortcoming can be fixed by changing the signature of encode()
and decode() instead of introducing an obscure workaround like
unfolding. Therefore, we changed the signature of them in 4.0.
The change is simple, but backward-incompatible. encode() and decode()
do not return anything. Instead, the codec framework will pass a
MessageBuf<Object> so encode() and decode() can add the generated
messages into the MessageBuf.
- Add ChannelHandlerUtil and move the core logic of ChannelInbound/OutboundMessageHandler to ChannelHandlerUtil
- Add ChannelHandlerUtil.SingleInbound/OutboundMessageHandler and make ChannelInbound/OutboundMessageHandlerAdapter implement them. This is a backward incompatible change because it forces all handler methods to be public (was protected previously)
- Fixes: #1119
- Move common methods from ByteBuf to Buf
- Rename ensureWritableBytes() to ensureWritable()
- Rename readable() to isReadable()
- Rename writable() to isWritable()
- Add isReadable(int) and isWritable(int)
- Add AbstractMessageBuf
- Rewrite DefaultMessageBuf and QueueBackedMessageBuf
- based on Josh Bloch's public domain ArrayDeque impl
* This is done because we noticed that the previous change limit the usage more then it gave us any benefit. Now it is possible
again to rewrite the url on the fly or reuse the objects when writing a proxy and so limit the GC pressure.
* Fixes also #979
This changes the behavior of the ChannelPipeline.remove(..) and ChannelPipeline.replace(..) methods in that way
that after invocation it is not possible anymore to access any data in the inbound or outbound buffer. This is
because it empty it now to prevent side-effects. If a user want to preserve the content and forward it to the
next handler in the pipeline it is adviced to use one of the new methods which where introduced.
- ChannelPipeline.removeAndForward(..)
- ChannelPipeline.replaceAndForward(..)
