Commit Graph

540 Commits

Author SHA1 Message Date
Norman Maurer
1b06de76c9 Correctly reset cached local and remote address when disconnect() is called (#9545)
Motivation:

We should correctly reset the cached local and remote address when a Channel.disconnect() is called and the channel has a notion of disconnect vs close (for example DatagramChannel implementations).

Modifications:

- Correctly reset cached kicak abd remote address
- Update testcase to cover it and so ensure all transports work in a consistent way

Result:

Correctly handle disconnect()
2019-09-19 08:51:23 +02:00
Norman Maurer
19a12fba4c Correctly handle IPV6-mapped-IPV4 addresses in native code when receiving datagrams (#9560)
Motivation:

291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.

Modifications:

- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails

Result:

No more IndexOutOfBoundsException
2019-09-11 20:31:50 +02:00
Norman Maurer
82c330e8a5 Also support sendmmsg(...) on connected UDP channels when using native epoll transport (#9536)
Motivation:

We should also use sendmmsg on connected channels whenever possible to reduce the overhead of syscalls.

Modifications:

No matter if the channel is connected or not try to use sendmmsg when supported to reduce the overhead of syscalls

Result:

Better performance on connected UDP channels due less syscalls
2019-09-06 20:57:50 +02:00
Norman Maurer
d57a5f5d4f Correctly handle ipv6 mapped ipv4 addresses when using recvmmsg (#9541)
Motivation:

394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.

Modifications:

- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug

Result:

Correctly handle ipv6 mapped ipv4 addresses
2019-09-06 13:55:35 +02:00
Norman Maurer
48634f1466
Protect ChannelHandler from reentrancee issues (#9358)
Motivation:

At the moment it is quite easy to hit reentrance issues when you have multiple handlers in the pipeline and each of the handlers does not correctly protect against these. To make it easier for the user we should try to protect from these. The issue is usually if and inbound event will trigger and outbound event and this outbound event then against triggeres an inbound event. This may result in having methods in a ChannelHandler re-enter some method and so state can be corrupted or messages be re-ordered.

Modifications:

- Keep track of inbound / outbound operations in DefaultChannelHandlerContext and if reentrancy is detected break it by scheduling the action on the EventLoop. This will then be picked up once the method returns and so the reentrancy is broken up.
- Adjust tests which made strange assumptions about execution order

Result:

No more reentrancy of handlers possible.
2019-09-03 10:28:08 +02:00
Norman Maurer
6f616bb3cf Avoid creating FileInputStream and FileOutputStream for obtaining Fil… (#8110)
Motivation:

If all we need is the FileChannel we should better use RandomAccessFile as FileInputStream and FileOutputStream use a finalizer.

Modifications:

Replace FileInputStream and FileOutputStream with RandomAccessFile when possible.

Result:

Fixes https://github.com/netty/netty/issues/8078.
2019-08-17 09:52:16 +02:00
Norman Maurer
9d5420987a Add support for loopbackmode and accessing the configured interface when using epoll native transport with multicast (#9218)
Motivation:

We did not have support for enable / disable loopback mode in our native epoll transport and also missed the implemention to access the configured interface.

Modifications:

Add implementation and adjust test to cover it

Result:

More complete multicast support with native epoll transport
2019-06-07 13:45:45 -07:00
Steve Buzzard
33d1a91083 Added UDP multicast (with caveats: getInterface, getNetworkInterface, block or loopback-mode-disabled operations).
Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for common use cases.

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-25 10:06:13 +02:00
Julien Viet
f85583047e KQueueEventLoop | EpollEventLoop may incorrectly update registration when FD is reused.
Motivation:

The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.

Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.

As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.

The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed

Modifications:

- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop

Result:

KQueue and Epoll native transports correctly handle FD reuse

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-22 10:11:42 +02:00
Norman Maurer
438a4d5467 Make Multicast tests more robust (#9053)
Motivation:

86dd388637 reverted the usage of IPv6 Multicast test. This commit makes the whole multicast testing a lot more robust by selecting the correct interface in any case and also reverts the `@Ignore`

Modifications:

- More robust multicast testing by selecting the right NetworkInterface
- Remove the `@Ignore` again for the IPv6 test

Result:

More robust multicast testing
2019-04-15 21:40:35 +02:00
Norman Maurer
0ae647391c Ignore ipv6 multicast test that was added in 778ff2057e for now
Motivation:

The multicast ipv6 test fails on some systems. As I just added it let me ignore it for now while investigating.

Modifications:

Add @ignore

Result:

Stable testsuite while investigate
2019-04-12 16:58:12 +02:00
Norman Maurer
9ef5c0946a Add IPv6 multicast test to testsuite (#9037)
Motivation:

We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.

Modifications:

- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.

Result:

Better test coverage
2019-04-12 14:26:09 +02:00
Norman Maurer
7c35781f4d
DefaultPromise may throw checked exceptions that are not advertised (#8995)
Motivation:

We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.

Modifications:

- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests

Result:

Fixes https://github.com/netty/netty/issues/8521.
2019-04-10 07:15:31 +02:00
Norman Maurer
0f34345347
Merge ChannelInboundHandler and ChannelOutboundHandler into ChannelHa… (#8957)
Motivation:

In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.

Modifications:

- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.

Result:

Cleaner and simpler code in terms of class-hierarchy.
2019-03-28 09:28:27 +00:00
Lunfu Zhong
238018e4ea Support ALLOW_HALF_CLOSURE channel option on Unix domain socket. (#8932)
Motivation:

Since DomainSocketChannel is a DuplexChannel,  which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.

I thought this could be a missing feature of Unix domain socket, so here the PR for it.

Modifications:

1. Added allHalfClosure property both in  EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.

Result:

ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
2019-03-19 11:37:54 +01:00
Norman Maurer
42742e233f
Deprecate ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter (#8929)
Motivation:

As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.

Modifications:

- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore

Result:

Cleanup class-hierarchy and make things a bit more flexible.
2019-03-13 09:46:10 +01:00
Norman Maurer
c6b372f517 Use maven plugin to prevent API/ABI breakage as part of build process (#8904)
Motivation:

Netty is very widely used which can lead to a lot of pain when we break API / ABI. We should make use japicmp-maven-plugin during the build to verify we do not introduce breakage by mistake.

Modifications:

- Add japicmp-maven-plugin to the build process
- Fix a method signature change in HttpProxyHandler that was flagged as a possible problem.

Result:

Ensure no API/ABI breakage accour between releases.
2019-03-01 19:48:29 +01:00
Norman Maurer
106bd0c091 DefaultFileRegion.transferTo with invalid count may cause busy-spin (#8885)
Motivation:

`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.

Modifications:

- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite

Result:

Fixes https://github.com/netty/netty/issues/8868.
2019-02-26 11:21:03 +01:00
Norman Maurer
b9d277dbcb Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 10:00:55 +01:00
Stephane Landelle
ee4e46e6e2 Drop SPDY support (#8845)
Motivation:

SPDY has been superseded by HTTP/2. Chrome has dropped support in 2016 and GFE no longer negociate it.

Modifications:

* drop codec
* drop examples
* drop constants from `ApplicationProtocolNames`

Result:

SPDY support dropped from Netty 5
2019-02-07 09:25:31 +01:00
田欧
e8efcd82a8 migrate java8: use requireNonNull (#8840)
Motivation:

We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)

Modifications:

- Use Objects.requireNonNull(...)

Result:

Less code to maintain.
2019-02-04 10:32:25 +01:00
Norman Maurer
99face616a Reduce GC produced by native DatagramChannel implementations when in connected mode. (#8806)
Motivation:

In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...)  method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.

Modifications:

- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.

Result:

Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
2019-02-01 10:29:55 +01:00
Norman Maurer
8e72071d76 Remove ability to specify a custom EventExecutor when adding handlers… (#8778)
Motiviation:

In the past we allowed to use different EventExecutors for different ChannelHandlers in the ChannelPipeline. This introduced a lot of complexity while not providing much gain. Also it made the pipeline racy in terms of adding / remove handlers in some situations. This feature is not really used in the wild and can be easily archived by offloading heavy logic to an Executor by the user itself.

Modifications:

- Remove the ability to provide custom EventExecutor when adding handlers to the pipeline.
- Remove testcode that is not needed any more
- Ensure a handler is correctly visible in the pipeline when asked for it by the user while not be used until the EventLoop runs. This ensures correct ordering and visibility.
- Correctly remove ChannelHandlers from pipeline when scheduling of handlerAdded(...) callbacks fail.

Result:

Remove races in DefaultChannelPipeline and simplify implementation of AbstractChannelHandlerContext.
2019-01-30 13:41:42 +01:00
田欧
6222101924 migrate java8: use lambda and method reference (#8781)
Motivation:

We can use lambdas now as we use Java8.

Modification:

use lambda function for all package, #8751 only migrate transport package.

Result:

Code cleanup.
2019-01-29 14:06:05 +01:00
田欧
e941cbe27a remove unused import statement (#8792)
Motivation:
The code contained some unused import statements.

Modification:
Remove unused import statements.

Result:
Code cleanup
2019-01-28 16:50:15 +01:00
Stephane Landelle
e1c94363eb Remove deprecated SslContext constructors (#8785)
Motivation:

SslContext implementations have tons of contructors, most of them deprecated as we want to enforce builder usage in Netty 5.

Cleaning them up is a requirement prior to introducing new parameters such as hostname verification.

Modifications:

* Make SslContext implementations classes and constructors package private, users are supposed to use the SslContextBuilder.
* Drop all but one constructor. The exception for now is with Jdk(Client|Server)Context that still has an additional constructor that takes an ApplicationProtocolNegotiator parameter. ApplicationProtocolNegotiator usage is supposed to be dropped in favor of ApplicationProtocolConfig and this constructor is only used in tests, so I guess it will be dropped to in a follow up.

Result:

Deprecated code dropped. Path cleaned up for introducing new features with having to introduce yet another constructor.
2019-01-28 06:01:53 +01:00
田欧
934a07fbe2 migrate java8 (#8779)
Motivation:

We can omit argument types when using Java8.

Modification:

Omit arguments where possible.

Result:

Cleaner code.
2019-01-28 05:55:30 +01:00
Dmitriy Dumanskiy
4a10357fd8 IDE warnings cleanup (#8768)
Motivation:

IDE shows some warnings

Modification:

Small IDE warnings cleanup in different places.

Result:

Less warnings
2019-01-23 14:01:48 +01:00
Norman Maurer
3d6e6136a9
Decouple EventLoop details from the IO handling for each transport to… (#8680)
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization

Motiviation:

As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.

Modifications:

This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.

Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:

  * Adding instrumentation / metrics:
    * how many Channels are registered on an SingleThreadEventLoop
    * how many Channels were handled during the IO processing in an EventLoop run
    * how many task were handled during the last EventLoop / EventExecutor run
    * how many outstanding tasks we have
    ...
    ...
  * Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
  * Use different Promise / Future / ScheduledFuture implementations
  * decorate Runnable / Callables when submitted to the EventExecutor / EventLoop

As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:

  * AbstractEventLoop
  * AbstractEventLoopGroup
  * EventExecutorChooser
  * EventExecutorChooserFactory
  * DefaultEventLoopGroup
  * DefaultEventExecutor
  * DefaultEventExecutorGroup

Result:

Fixes https://github.com/netty/netty/issues/8514 .
2019-01-23 08:32:05 +01:00
Norman Maurer
5cfb107822
Leave responsibility to choose EventExecutor to the user (#8746)
Motivation:

We should leave the responsibility to choose the EventExecutor for a ChannelHandler to the user for more flexibility and to keep things simple.

Modification:

- Change method signatures to take an EventExecutor and not an EventExecutorGroup
- Remove special ChannelOption that allowed to enable / disable EventExecutor pinning

Result:

Simpler and more flexible code.
2019-01-23 07:44:32 +01:00
Dmitriy Dumanskiy
7b92ff2500 Java 8 migration. Remove ThreadLocalProvider and inline java.util.concurrent.ThreadLocalRandom.current() where necessary. (#8762)
Motivation:

Custom Netty ThreadLocalRandom and ThreadLocalRandomProvider classes are no longer needed and can be removed.

Modification:

Remove own ThreadLocalRandom

Result:

Less code to maintain
2019-01-22 20:14:28 +01:00
田欧
9d62deeb6f Java 8 migration: Use diamond operator (#8749)
Motivation:

We can use the diamond operator these days.

Modification:

Use diamond operator whenever possible.

Result:

More modern code and less boiler-plate.
2019-01-22 16:07:26 +01:00
Dmitriy Dumanskiy
c34340fff8 Java 8 migration. Auto close for try catch blocks (#8752)
Motivation:

Since Java 7 we can automatically close resources in try () construction.

Modification:

Changed all try catches in the code with autoclose try (resource)

Result:

Less boiler-plate
2019-01-22 15:57:30 +01:00
Norman Maurer
c10ccc5dec
Tighten contract between Channel and EventLoop by require the EventLoop on Channel construction. (#8587)
Motivation:

At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.

Modifications:

- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour

Result:

A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.

Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).

Fixes https://github.com/netty/netty/issues/8513.
2019-01-14 20:11:13 +01:00
Norman Maurer
5e79d57b7d Skip test on windows as the semantics we expect are only true on Linux / Unix / BSD / MacOS (#8629)
Motivation:

In the test we assume some semantics on how RST is done that are not true for Windows so we should skip it.

Modifications:

Skip test when on windows.

Result:

Be able to run testsuite on windows. Fixes https://github.com/netty/netty/issues/8571.
2018-12-06 20:43:56 +01:00
Feri73
5618229203 Correcting Maven Dependencies (#8622)
Motivation:

Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.

Modifications:

For all maven modules, add all of their dependencies to pom.xml

Result:

All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
2018-12-06 09:02:00 +01:00
Norman Maurer
e114d6be46
Remove OIO transport (and transports that depend on it). (#8580)
Motivation:

This transport is unique because it uses Java's blocking IO (java.io / java.net) under the hood. However it is not clear if this transport is actually useful so it should be removed.

Modifications:

- Remove OIO transport and RXTX transport which depend on it.
- Remove Oio*Sctp* implementations
- Remove PerThreadEventLoop* which was only used by OIO transport.

Result:

Fixes https://github.com/netty/netty/issues/8510.
2018-11-21 15:23:18 +01:00
Norman Maurer
e4fae1c98e
Remove UDT transport for Netty 5. (#8578)
Motivation:

The UDT transport was marked as @Deprecated a long time ago as the underlying native library is not really maintained anymore. We should remove it as part of Netty 5.

Modifications:

Remove UDT transport

Result:

Dont try to maintain a transport which uses an unmaintained native lib internally.
2018-11-20 19:26:20 +01:00
Norman Maurer
2c78dde749 Update version number to start working on Netty 5 2018-11-20 15:49:57 +01:00
root
3e7ddb36c7 [maven-release-plugin] prepare for next development iteration 2018-10-29 15:38:51 +00:00
root
9e50739601 [maven-release-plugin] prepare release netty-4.1.31.Final 2018-10-29 15:37:47 +00:00
Norman Maurer
0ddc62cec0
Add support for TLSv1.3 (#8293)
Motivation:

TLSv1.3 support is included in java11 and is also supported by OpenSSL 1.1.1, so we should support when possible.

Modifications:
- Add support for TLSv1.3 using either the JDK implementation or the native implementation provided by netty-tcnative when compiled against openssl 1.1.1
- Adjust unit tests for semantics provided by TLSv1.3
- Correctly handle custom Provider implementations that not support TLSv1.3

Result:

Be able to use TLSv1.3 with netty.
2018-10-17 08:35:35 +02:00
root
2d7cb47edd [maven-release-plugin] prepare for next development iteration 2018-09-27 19:00:45 +00:00
root
3a9ac829d5 [maven-release-plugin] prepare release netty-4.1.30.Final 2018-09-27 18:56:12 +00:00
root
a580dc7585 [maven-release-plugin] prepare for next development iteration 2018-08-24 06:36:33 +00:00
root
3fc789e83f [maven-release-plugin] prepare release netty-4.1.29.Final 2018-08-24 06:36:06 +00:00
Norman Maurer
fe14bad69c
Adjust SSL related tests to be more correct and so pass in the next EA release of java11. (#8162)
Motivation:

In some of our tests we not correctly init the SSLEngine before trying to perform a handshake which can cause an IllegalStateException. While this not happened in previous java releases it does now on Java11 (which is "ok" as its even mentioned in the api docs). Beside this how we selected the ciphersuite to test renegotation was not 100 % safe.

Modifications:

- Correctly init SSLEngine before using it
- Correctly select ciphersuite before testing for renegotation.

Result:

More correct tests and also pass on next java11 EA release.
2018-08-01 06:37:53 +02:00
root
fcb19cb589 [maven-release-plugin] prepare for next development iteration 2018-07-27 04:59:28 +00:00
root
ff785fbe39 [maven-release-plugin] prepare release netty-4.1.28.Final 2018-07-27 04:59:06 +00:00
root
b4dbdc2036 [maven-release-plugin] prepare for next development iteration 2018-07-11 15:37:40 +00:00