Motivation:
If compression is enabled and the HttpResponse also
implements HttpContent (but not LastHttpContent) then
the buffer will be freed to eagerly.
Modification:
I retain the buffer the same way that is done for the LastHttpContent case.
Note that there is another suspicious looking call a few lines above (if beginEncode returns null). I am not sure if this should also be retained.
Result:
Fixes#11092
Motivation
The HttpObjectDecoder accepts input parameters for maxInitialLineLength
and maxHeaderSize. These are important variables since both message
components must be buffered in memory. As such, many decoders (like
Netty and others) introduce constraints. Due to their importance, many
users may wish to add instrumentation on the values of successful
decoder results, or otherwise be able to access these values to enforce
their own supplemental constraints.
While users can perhaps estimate the sizes today, they will not be
exact, due to the decoder being responsible for consuming optional
whitespace and the like.
Modifications
* Add HttpMessageDecoderResult class. This class extends DecoderResult
and is intended for HttpMessage objects successfully decoded by the
HttpObjectDecoder. It exposes attributes for the decoded
initialLineLength and headerSize.
* Modify HttpObjectDecoder to produce HttpMessageDecoderResults upon
successfully decoding the last HTTP header.
* Add corresponding tests to HttpRequestDecoderTest &
HttpResponseDecoderTest.
Co-authored-by: Bennett Lynch <Bennett-Lynch@users.noreply.github.com>
Motivation:
As stated by https://tools.ietf.org/html/rfc7540#section-8.1.2.6 we should report a stream error if the content-length does not match the sum of all data frames.
Modifications:
- Verify that the sum of data frames match if a content-length header was send.
- Handle multiple content-length headers and also handle negative values
- Add io.netty.http2.validateContentLength system property which allows to disable the more strict validation
- Add unit tests
Result:
Correctly handle the case when the content-length header was included but not match what is send and also when content-length header is invalid
Motivation:
HttpObjectDecoder may throw an IllegalArgumentException if it encounters
a character that Character.isWhitespace() returns true for, but is not
one of the two valid OWS (optional whitespace) values. Such values may
not have friendly or readable toString() values. We should include the
hex value so that the illegal character can always be determined.
Modifications:
Add hex value as well
Result:
Easier to debug
Co-authored-by: Bennett Lynch <Bennett-Lynch@users.noreply.github.com>
Motivation:
- Underlying buffer usages might be erroneous when releasing them internaly
in HttpPostMultipartRequestDecoder.
2 bugs occurs:
1) Final File upload seems not to be of the right size.
2) Memory, even in Disk mode, is increasing continuously, while it shouldn't.
- Method `getByte(position)` is too often called within the current implementation
of the HttpPostMultipartRequestDecoder.
This implies too much activities which is visible when PARANOID mode is active.
This is also true in standard mode.
Apply the same fix on buffer from HttpPostMultipartRequestDecoder to HttpPostStandardRequestDecoder
made previously.
Finally in order to ensure we do not rewrite already decoded HttpData when decoding
next ones within multipart, we must ensure the buffers are copied and not a retained slice.
Modification:
- Add some tests to check consistency for HttpPostMultipartRequestDecoder.
Add a package protected method for testing purpose only.
- Use the `bytesBefore(...)` method instead of `getByte(pos)` in order to limit the external
access to the underlying buffer by retrieving iteratively the beginning of a correct start
position.
It is used to find both LF/CRLF and delimiter.
2 methods in HttpPostBodyUtil were created for that.
The undecodedChunk is copied when adding a chunk to a DataMultipart is loaded.
The same buffer is also rewritten in order to release the copied memory part.
Result:
Just for note, for both Memory or Disk or Mixed mode factories, the release has to be done as:
for (InterfaceHttpData httpData: decoder.getBodyHttpDatas()) {
httpData.release();
factory.removeHttpDataFromClean(request, httpData);
}
factory.cleanAllHttpData();
decoder.destroy();
The memory used is minimal in Disk or Mixed mode. In Memory mode, a big file is still
in memory but not more in the undecodedChunk but its own buffer (copied).
In terms of benchmarking, the results are:
Original code Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 0,152 ± 0,100 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 0,543 ± 0,218 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 0,001 ± 0,001 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 0,615 ± 0,070 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 0,114 ± 0,063 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 0,664 ± 0,034 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,001 ± 0,001 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 0,620 ± 0,140 ops/ms
New code Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 4,037 ± 0,358 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 4,226 ± 0,471 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 0,875 ± 0,029 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 4,346 ± 0,275 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 2,044 ± 0,020 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 2,278 ± 0,159 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,174 ± 0,004 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 2,370 ± 0,065 ops/ms
In short, using big file transfers, this is about 7 times faster with new code, while
using high number of HttpData, this is about 4 times faster with new code when using Simple Level.
When using Paranoid Level, using big file transfers, this is about 800 times faster with new code, while
using high number of HttpData, this is about 170 times faster with new code.
Motivation:
File.createTempFile(String, String)` will create a temporary file in the system temporary directory if the 'java.io.tmpdir'. The permissions on that file utilize the umask. In a majority of cases, this means that the file that java creates has the permissions: `-rw-r--r--`, thus, any other local user on that system can read the contents of that file.
This can be a security concern if any sensitive data is stored in this file.
This was reported by Jonathan Leitschuh <jonathan.leitschuh@gmail.com> as a security problem.
Modifications:
Use Files.createTempFile(...) which will use safe-defaults when running on java 7 and later. If running on java 6 there isnt much we can do, which is fair enough as java 6 shouldnt be considered "safe" anyway.
Result:
Create temporary files with sane permissions by default.
Motivation:
The changes introduced in 1c230405fd did cause various issues while the fix itself is not considered critical. For now it is considered the best to just rollback and investigate more.
Modifications:
- Revert changes done in 1c230405fd (and later) for
the post decoders.
- Ensure we give memory back to the system as soon as possible in a safe manner
Result:
Fixes https://github.com/netty/netty/issues/10973
Motivation:
We currently append extensions to the user defined "sec-websocket-extensions" headers. This can cause duplicated entries.
Modifications:
* Replace existing `WebSocketExtensionUtil#appendExtension` private helper with a new `computeMergeExtensionsHeaderValue`. User defined parameters have higher precedence.
* Add tests (existing method wasn't tested)
* Reuse code for both client and server side (code was duplicated).
Result:
No more duplicated entries when user defined extensions overlap with the ones Netty generated.
Motivation:
We currently append extensions to the user defined "sec-websocket-extensions" headers. This can cause duplicated entries.
Modifications:
* Replace existing `WebSocketExtensionUtil#appendExtension` private helper with a new `computeMergeExtensionsHeaderValue`. User defined parameters have higher precedence.
* Add tests (existing method wasn't tested)
* Reuse code for both client and server side (code was duplicated).
Result:
No more duplicated entries when user defined extensions overlap with the ones Netty generated.
Motivation:
switch is used when we have a good amount of cases because switch is faster than if-else. However, we're using only 1 case in switch which can affect performance.
Modification:
Changed switch to if.
Result:
Good code.
Motivation:
To fix the infinite loop parsing a multipart body.
Modifications:
Modified the loop to use the correct variable.
Result:
Multipart bodies will be parsed correctly again.
Motivation:
According to specification 1006 status code must not be set as a status code in a
Close control frame by the endpoint. However 1006 status code can be
used in applications to indicate that the connection was closed abnormally.
Modifications:
- Enforce status code validation in CloseWebSocketFrame
- Add WebSocketCloseStatus construction with disabled validation
- Add test
Result:
Fixes#10838
Motivation:
We should add `state` in the exception message of `HttpObjectEncoder` because it makes debugging a little easier.
Modification:
Added `state` in the exception message.
Result:
Better exception message for smooth debugging.
Motivation:
According rfc (https://tools.ietf.org/html/rfc6455#section-11.3.4), `Sec-WebSocket-Protocol` header field MUST NOT appear
more than once in an HTTP response.
At the moment we can pass `Sec-WebSocket-Protocol` via custom headers and it will be added to response.
Modification:
Change method add() to set() for avoid duplication. If we pass sub protocols in handshaker constructor it means that they are preferred over custom ones.
Result:
Less error prone behavior.
Fix issue #10508 where PARANOID mode slow down about 1000 times compared to ADVANCED.
Also fix a rare issue when internal buffer was growing over a limit, it was partially discarded
using `discardReadBytes()` which causes bad changes within previously discovered HttpData.
Reasons were:
Too many `readByte()` method calls while other ways exist (such as keep in memory the last scan position when trying to find a delimiter or using `bytesBefore(firstByte)` instead of looping externally).
Changes done:
- major change on way buffer are parsed: instead of read byte per byte until found delimiter, try to find the delimiter using `bytesBefore()` and keep the last unfound position to skeep already parsed parts (algorithms are the same but implementation of scan are different)
- Change the condition to discard read bytes when refCnt is at most 1.
Observations using Async-Profiler:
==================================
1) Without optimizations, most of the time (more than 95%) is through `readByte()` method within `loadDataMultipartStandard` method.
2) With using `bytesBefore(byte)` instead of `readByte()` to find various delimiter, the `loadDataMultipartStandard` method is going down to 19 to 33% depending on the test used. the `readByte()` method or equivalent `getByte(pos)` method are going down to 15% (from 95%).
Times are confirming those profiling:
- With optimizations, in SIMPLE mode about 82% better, in ADVANCED mode about 79% better and in PARANOID mode about 99% better (most of the duplicate read accesses are removed or make internally through `bytesBefore(byte)` method)
A benchmark is added to show the behavior of the various cases (one big item, such as File upload, and many items) and various level of detection (Disabled, Simple, Advanced, Paranoid). This benchmark is intend to alert if new implementations make too many differences (such as the previous version where about PARANOID gives about 1000 times slower than other levels, while it is now about at most 10 times).
Extract of Benchmark run:
=========================
Run complete. Total time: 00:13:27
Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 2,248 ± 0,198 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 2,067 ± 1,219 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 1,109 ± 0,038 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 2,326 ± 0,314 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 1,444 ± 0,226 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 1,462 ± 0,642 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,159 ± 0,003 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 1,522 ± 0,049 ops/ms
Motivation:
https in xmlns URIs does not work and will let the maven release plugin fail:
```
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.779 s
[INFO] Finished at: 2020-11-10T07:45:21Z
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare (default-cli) on project netty-parent: Execution default-cli of goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare failed: The namespace xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" could not be added as a namespace to "project": The namespace prefix "xsi" collides with an additional namespace declared by the element -> [Help 1]
[ERROR]
```
See also https://issues.apache.org/jira/browse/HBASE-24014.
Modifications:
Use http for xmlns
Result:
Be able to use maven release plugin
Motivation:
HttpServerUpgradeHandler takes a list of protocols from an incoming
request and uses them for building a response.
Although the class does some validation while parsing the list,
it then disables HTTP header validation when it builds a responst.
The disabled validation may potentially allow
HTTP response splitting attacks.
Modifications:
- Enabled HTTP header validation in HttpServerUpgradeHandler
as a defense-in-depth measure to prevent possible
HTTP response splitting attacks.
- Added a new constructor that allows disabling the validation.
Result:
HttpServerUpgradeHandler validates incoming protocols
before including them into a response.
That should prevent possible HTTP response splitting attacks.
Motivation:
At the moment we have only one base `WebSocketHandshakeException` for handling WebSocket upgrade issues.
Unfortunately, this message contains only a string message about the cause of the failure, which is inconvenient in handling.
Modification:
Provide new `WebSocketClientHandshakeException` with `HttpResponse` field and `WebSocketServerHandshakeException` with `HttpRequest` field both of them without content for avoid reference counting
problems.
Result:
More information for more flexible handling.
Fixes#10277#4528#10639.
Motivation:
HTTP is a plaintext protocol which means that someone may be able
to eavesdrop the data. To prevent this, HTTPS should be used whenever
possible. However, maintaining using https:// in all URLs may be
difficult. The nohttp tool can help here. The tool scans all the files
in a repository and reports where http:// is used.
Modifications:
- Added nohttp (via checkstyle) into the build process.
- Suppressed findings for the websites
that don't support HTTPS or that are not reachable
Result:
- Prevent using HTTP in the future.
- Encourage users to use HTTPS when they follow the links they found in
the code.
Motivation:
I noticed WebSocketServerExtensionHandler taking up a non-trivial
amount of CPU time for a non-websocket based menchmark. This attempts
to speed it up.
Modifications:
- It is faster to check for a 101 response than to look at headers,
so an initial response code check is done
- Move all the actual upgrade code into its own method to increase
chance of this method being inlined
- Add an extra contains() check for the upgrade header, to avoid
allocating an iterator if there is no upgrade header
Result:
A small but noticable performance increase.
Signed-off-by: Stuart Douglas <stuart.w.douglas@gmail.com>
Motivation:
junit deprecated Assert.assertThat(...)
Modifications:
Use MatcherAssert.assertThat(...) as replacement for deprecated method
Result:
Less deprecation warnings
Motivation:
LGTM reports multiple issues. They need to be triaged,
and real ones should be fixed.
Modifications:
- Fixed multiple issues reported by LGTM, such as redundant conditions,
resource leaks, typos, possible integer overflows.
- Suppressed false-positives.
- Added a few testcases.
Result:
Fixed several possible issues, get rid of false alarms in the LGTM report.
Motivation:
We have a few classes in which we store and reuse static instances of various exceptions. When doing so it is important to also override fillInStacktrace() and so prevent the leak of the ClassLoader in the internal backtrace field.
Modifications:
- Add overrides of fillInStracktrace when needed
- Move ThrowableUtil usage in the static methods
Result:
Fixes https://github.com/netty/netty/pull/10686
Motivation:
Fix Broken Link of OWASP HttpOnly Cookie in Cookie class.
Modification:
Updated the broken link.
Result:
Broken Link Fix for better Documentation.
Motivation:
We should use ObjectUtil for checking if Compression parameters are in range. This will reduce LOC and make code more readable.
Modification:
Used ObjectUtil
Result:
More readable code
