Motivation:
When writing an HTTP/2 HEADERS with END_STREAM=1, the application expects
the stream to be closed afterward. However, the write can fail locally
due to HPACK encoder and similar. When that happens we need to make sure
to issue a RST_STREAM otherwise the stream can be closed locally but
orphaned remotely. The RST_STREAM is typically handled by
Http2ConnectionHandler.onStreamError, which will only send a RST_STREAM
if that stream still exists locally.
There are two possible flows for trailers, one handled immediately and
one going through the flow controller. Previously they behaved
differently, with the immedate code calling the error handler after
closing the stream. The immediate code also used a listener for calling
closeStreamLocal while the flow controlled code did so immediately after
the write.
The two code paths also differed in their VoidChannelPromise handling,
but both were broken. The immediate code path called unvoid() only if
END_STREAM=1, however it could always potentially add a listener via
notifyLifecycleManagerOnError(). And the flow controlled code path
unvoided incorrectly, changing the promise completion behavior. It also
passed the wrong promise to closeStreamLocal() in FlowControlledBase.
Modifications:
Move closeStreamLocal handling after calls to onError. This is the
primary change.
Now call closeStreamLocal immediately instead of when the future
completes. This is the more likely correct behavior as it matches that
of DATA frames.
Fix all the VoidChannelPromise handling.
Result:
Http2ConnectionHandler.onStreamError sees the same state as the remote
and issues a RST_STREAM, properly cleaning up the stream.
Motivation:
Http2MultiplexCodec queues data internally if data is delivered from the
parent channel but the child channel did not request data. If the parent
channel notifies of a stream closure it is possible data in the queue
will be discarded before closing the channel.
Http2MultiplexCodec interacts with RecvByteBufAllocator to control the
child channel's demand for read. However it currently only ever reads a
maximum of one time per loop. This can thrash the read loop and bloat
the call stack if auto read is on, because channelReadComplete will
re-enter the read loop synchronously, and also neglect to deliver data
during the parent's read loop (if it is active). This also meant the
readPendingQueue was not utilized as originally intended (to extend the
child channel's read loop during the parent channel's read loop if
demand for data still existed).
Modifications:
- Modify the child channel's read loop to respect the
RecvByteBufAllocator, and append to the parents readPendingQueue if
appropriate.
- Stream closure notification behaves like EPOLL and KQUEUE transports
and reads all queued data, because the data is already queued in memory
and it is known there will be no more data. This will also replenish the
connection flow control window which may otherwise be constrained by a
closed stream.
Result:
More correct read loop and less risk of dropping data.
Motivation:
When a Http2MultiplexCodec stream channel fails to write the first
HEADERS it will forcibly close, and that will trigger sending a
RST_STREAM, which is commonly a connection level protocol error. This is
because it has what looks like a valid stream id, but didn't check with
the connection as to whether the stream may have actually existed.
Modifications:
Instead of checking if the stream was just a valid looking id ( > 0) we
check with the connection as to whether it may have existed at all.
Result:
We no longer send a RST_STREAM frame from Http2MultiplexCodec for idle
streams.
Motivation:
The Http2Connection state is updated by the DefaultHttp2ConnectionDecoder after the frame listener is notified of the goaway frame. If the listener sends a frame synchronously this means the connection state will not know about the goaway it just received and we may send frames that are not allowed on the connection. This may also mean a stream object is created but it may never get taken out of the stream map unless some other event occurs (e.g. timeout).
Modifications:
- The Http2Connection state should be updated before the listener is notified of the goaway
- The Http2Connection state modification and validation should be self contained when processing a goaway instead of partially in the decoder.
Result:
No more creating streams and sending frames after a goaway has been sent or received.
Motivation:
If the local endpoint receives a GO_AWAY frame and then tries to write a stream with a streamId higher than the last know stream ID we will throw a connection error. This results in the local peer sending a GO_AWAY frame to the remote peer, but this is not necessary as the error can be isolated to the local endpoint and communicated via the ChannelFuture return value.
Modifications:
- Instead of throwing a connection error, throw a stream error that simulates the peer receiving the stream and replying with a RST
Result:
Connections are not closed abruptly when trying to create a stream on the local endpoint after a GO_AWAY frame is received.
Motivation:
If a write fails for a Http2MultiplexChannel stream channel, the channel
may be forcibly closed, but only after the promise has been failed. That
means continuations attached to the promise may see the channel in an
inconsistent state of still being open and active.
Modifications:
Move the satisfaction of the promise to after the channel cleanup logic
runs.
Result:
Listeners attached to the future that resulted in a Failed write will
see the stream channel in the correct state.
Motivation:
The HTTP/2 spec dictates that invalid pseudo-headers should cause the
request/response to be treated as malformed (8.1.2.1), and the recourse
for that is to treat the situation as a stream error of type
PROTOCOL_ERROR (8.1.2.6). However, we're treating them as a connection
error with the connection being immediately torn down and the HPACK
state potentially being corrupted.
Modifications:
The HpackDecoder now throws a StreamException for validation failures
and throwing is deffered until the end of of the decode phase to ensure
that the HPACK state isn't corrupted by returning early.
Result:
Behavior more closely aligned with the HTTP/2 spec.
Fixes#8043.
Motivation:
We deviate from the AbstractChannel implementation on deregistration by
failing the provided promise if the channel is already deregistered. In
contrast, AbstractChannel will always set the promise to successfully
done.
Modification:
Change the
Http2MultiplexCodec.DefaultHttp2StreamChannel.Http2ChannelUnsafe to
always set the promise provided to deregister as done as is the
case in AbstractChannel.
Motivation:
There is an inconsistency between the order of events in the
StreamChannel implementation in Http2MultiplexCodec and other Channel
implementations that extend AbstractChannel where channelInactive and
channelUnregistered events are not performed 'later'. This can cause an
unexected order of events for ChannelHandler implementations that call
Channel.close() in response to some event.
Modification:
The Http2MultiplexCodec.DefaultHttp2StreamChannel.Http2ChannelUnsafe was
modified to bounce the deregistration and channelInactive events through
the parent channels EventLoop.
Result:
Stream events are now in the proper order.
Fixes#8018.
Motivation:
Http2MultiplexCodec doesn't currently have an API for using the response
of a h2c upgrade request.
Modifications:
Add a new API to the Http2MultiplexCodecBuilder which allows for setting
an upgrade handler and wire it into the Http2MultiplexCodec
implementation.
Result:
When using the Http2MultiplexCodec with h2c upgrades the upgrade handler
will get added to the Http2StreamChannel which represents the
half-closed (local) response of stream 1. It is then up to the user to
manage the transition from the IO channel pipeline configuration
necessary for making the h2c upgrade request to a form where it can read
the response from the new stream channel.
Fixes#7947.
Motivation:
The `ByteBuffer emptyPingBuf()` method of Http2CodecUtils is has been dead
code since DefaultHttp2PingFrame switched from using a ByteBuf to represent
the 8 octets to a long.
Modifications:
Remove the method and the unused static ByteBuf.
Result:
Less dead code.
Fixes#8002
Motivation:
This is a followup for #7860. In the fix for #7860 we only partly fixed the problem as Http2UnknownFrame did not correctly extend HttpStreamFrame and so only worked when using the Http2FrameCodec. We need to have it extend HttpStreamFrame as otherwise Http2MultiplexCodec will reject to handle it correctly.
Modifications:
- Let Http2UnknownFrame extend HttpStreamFrame
- Add unit tests for writing and reading Http2UnkownFrame instances when the Http2MultiplexCodec is used.
Result:
Fixes https://github.com/netty/netty/issues/7969.
Motivation:
When a sender sends too large of headers it should not unnecessarily
kill the connection, as killing the connection is a heavy-handed
solution while SETTINGS_MAX_HEADER_LIST_SIZE is advisory and may be
ignored.
The maxHeaderListSizeGoAway limit in HpackDecoder is unnecessary because
any headers causing the list to exceeding the max size can simply be
thrown away. In addition, DefaultHttp2FrameReader.HeadersBlockBuilder
limits the entire block to maxHeaderListSizeGoAway. Thus individual
literals are limited to maxHeaderListSizeGoAway.
(Technically, literals are limited to 1.6x maxHeaderListSizeGoAway,
since the canonical Huffman code has a maximum compression ratio of
.625. However, the "unnecessary" limit in HpackDecoder was also being
applied to compressed sizes.)
Modifications:
Remove maxHeaderListSizeGoAway checking in HpackDecoder and instead
eagerly throw away any headers causing the list to exceed
maxHeaderListSize.
Result:
Fewer large header cases will trigger connection-killing.
DefaultHttp2FrameReader.HeadersBlockBuilder will still kill the
connection when maxHeaderListSizeGoAway is exceeded, however.
Fixes#7887
Motivation:
Integer autoboxing in this class (and possibly also the varargs arrays)
showed non-negligible CPU and garbage contribution when profiling a gRPC
service. grpc-java currently hardcodes use of Http2FrameLogger, set at
DEBUG level.
Modifications:
Wrap offending log statements in conditional blocks.
Result:
Garbage won't be produced by Http2FrameLogger when set to a disabled
logging level.
Motivation:
Streams can be deregistered so we can't assume their existence in the stream map.
Modifications:
Add a null-check in case a stream has been deregistered.
Result:
Fixes#7898.
Motivation:
We incorrectly called frame.release() in onHttp2GoAwayFrame which could lead to IllegalReferenceCountExceptions. The call of release() is inappropriate because the fireChannelRead() in onHttp2Frame() will handle it.
Modifications:
- Not call frame.release()
- Add a unit test
Result:
Fxies https://github.com/netty/netty/issues/7892.
It is possible to create streams in the half-closed state where the
stream state doesn't reflect that the request headers have been sent by
the client or the server hasn't received the request headers. This
state isn't possible in the H2 spec as a half closed stream must have
either received a full request or have received the headers from a
pushed stream. In the current implementation, this can cause the stream
created as part of an h2c upgrade request to be in this invalid state
and result in the omission of RST frames as the client doesn't believe
it has sent the request to begin with.
Modification:
The `DefaultHttp2Connection.activate` method checks the state and
modifies the status of the request headers as appropriate.
Result:
Fixes#7847.
Motivation:
When connecting to an HTTP/2 server that did not set any value for the
SETTINGS_MAX_HEADER_LIST_SIZE in the settings frame, the netty client was
imposing an arbitrary maximum header list size of 8kB. There should be no need
for the client to enforce such a limit if the server has not specified any
limit. This caused an issue for a grpc-java client that needed to send a large
header to a server via an Envoy proxy server. The error condition is
demonstrated here: https://github.com/JLofgren/demo-grpc-java-bug-4284
Fixes grpc-java issue #4284 - https://github.com/grpc/grpc-java/issues/4284
and netty issue #7825 - https://github.com/netty/netty/issues/7825
Modifications:
In HpackEncoder use MAX_HEADER_LIST_SIZE as default maxHeader list size.
Result:
HpackEncoder will only enforce a max header list size if the server has
specified a limit in its settings frame.
Motivation:
We should allow to write Http2UnkownFrame to allow custom extensions.
Modifications:
Allow to write Http2UnkownFrame
Add unit test
Result:
Fixes https://github.com/netty/netty/issues/7860.
Motivation:
There is a race between both flushing the upgrade response and receiving
more data before the flush ChannelPromise can fire and reshape the
pipeline. Since We have already committed to an upgrade by writing the
upgrade response, we need to be immediately prepared for handling the
next protocol.
Modifications:
The pipeline reshaping logic in HttpServerUpgradeHandler has been moved
out of the ChannelFutureListener attached to the write of the upgrade
response and happens immediately after the writeAndFlush call, but
before the method returns.
Result:
The pipeline is no longer subject to receiving more data before the
pipeline has been reformed.
Motivation:
We did not correctly set the stream id in the headers of HttpMessage when converting a Http2HeadersFrame. This is based on https://github.com/netty/netty/pull/7778 so thanks to @jprante.
Modifications:
- Correctly set the id when possible in the header.
- Add test case
Result:
Correctly include stream id.
Motivation:
Allow the observation of SETTINGS frame by other handlers in the pipeline. For my particular use case this allows me to observe the value of MAX_CONCURRENT_STREAMS for a ChannelPool abstraction that supports HTTP/2 multiplexing. Beside this also forward GOAWAY frames.
Modification:
Always forward SETTINGS and GOAWAY frames
Result:
Settings / Goaway can now be observed in the parent channel. Previously it was not possible (to my knowledge) to capture the settings when using Http2MultiplexCodec.
Motivation:
At the moment we use a ByteBuf as the payload for a http2 frame. This complicates life-time management a lot with no real gain and also may produce more objects then needed. We should just use a long as it is required to be 8 bytes anyway.
Modifications:
Use long for ping payloads.
Result:
Fixes [#7629].
Motivation:
Reflective setAccessible(true) will produce scary warnings on the console when using java9+, while netty still works. That said users may feel uncomfortable with these warnings, we should not try to do it by default when using java9+.
Modifications:
Add io.netty.tryReflectionSetAccessible system property which controls if setAccessible(...) will be used. By default it will bet set to false when using java9+.
Result:
Fixes [#7254].
Motivation:
According to the spec:
All pseudo-header fields MUST appear in the header block before regular
header fields. Any request or response that contains a pseudo-header
field that appears in a header block after
a regular header field MUST be treated as malformed (Section 8.1.2.6).
Pseudo-header fields are only valid in the context in which they are defined.
Pseudo-header fields defined for requests MUST NOT appear in responses;
pseudo-header fields defined for responses MUST NOT appear in requests.
Pseudo-header fields MUST NOT appear in trailers.
Endpoints MUST treat a request or response that contains undefined or
invalid pseudo-header fields as malformed (Section 8.1.2.6).
Clients MUST NOT accept a malformed response. Note that these requirements
are intended to protect against several types of common attacks against HTTP;
they are deliberately strict because being permissive can expose
implementations to these vulnerabilities.
Modifications:
- Introduce validation in HPackDecoder
Result:
- Requests with unknown pseudo-field headers are rejected
- Requests with containing response specific pseudo-headers are rejected
- Requests where pseudo-header appear after regular header are rejected
- h2spec 8.1.2.1 pass
Motivation:
We should convert Http2Exceptions that are produced because of STREAM_CLOSED to ClosedChannelException when hand-over to the child channel to make it more consistent with other transports.
Modifications:
- Check if STREAM_CLOSED is used and if so create a new ClosedChannelException (while preserve the original exception as cause) and use it in the child channel
- Ensure STREAM_CLOSED is used in DefaultHttp2RemoteFlowController when writes are failed because of a closed stream.
- Add testcase
Result:
More consistent and correct exception usage.
Motivation:
When checking if a value is present, ReadOnlyHttp2Headers always ignores
case for values.
RFC 7540 says: https://tools.ietf.org/html/rfc7540#section-8.1.2
"header field names are strings of ASCII characters that are compared in a case-insensitive fashion"
But there is no such constraint on header values
Modifications:
Updated ReadOnlyHttp2Headers.contains to compare header value in a
case-sensitive way.
Result:
ReadOnlyHttp2Headers compares header names in a case-insensitive way,
values in a case-sensitive way.
Motivation:
If you test a header value providing a String, contains() returns false.
This is due to the implementation inherited from DefaultHeaders using
the JAVA_HASHER.
JAVA_HASHER.equals returns false because a is a String and b an
AsciiString.
Modifications:
DefaultHttp2Headers overrides contains and uses CASE_SENSITIVE_HASHER.
Result:
You can test a header value with any CharSequence implementation.
