Motivation:
In AbstractChannelTest we not correctly mocked some methods which could lead to test errors. That said it only showed up here when running from the IDE and not from the cmdLine.
Modifications:
Mock methods that are needed for the test
Result:
Test pass in the IDE as well.
Motivation:
At the moment EmbeddedChannel always handle close() and disconnect() the same way which also means that ChannelOutboundHandler.disconnect(...) will never called. We should allow to specify if these are handle different or not to make the use of EmbeddedChannel more flexible.
Modifications:
Add 2 other constructors which allow to specify if disconnect / close are handled the same way or differently.
Result:
More flexible usage of EmbeddedChannel possible.
Motivation:
Boxing/unboxing can be avoided.
Modifications:
Use parseInt/parseLong to avoid unnecessary boxing/unboxing.
Result:
Remove unnecessary boxing/unboxing.
Motivation:
The prefix fix of #2363 did not correctly handle the case when selectAgain is true and so missed to null out entries.
Modifications:
Move the i++ from end of loop to beginning of loop
Result:
Entries in the array will be null out so allow to have these GC'ed once the Channel close
Motivation:
We often used synchronized(this) while the whole method was synchronized, which can be simplified by just mark the whole method as synchronized.
Modifications:
Replace synchronized(this) with synchronized on the method
Result:
Cleaner code
Motivation:
Warnings in IDE, unclean code, negligible performance impact.
Modification:
Deletion of unused imports
Result:
No more warnings in IDE, cleaner code, negligible performance improvement.
Motivation:
Javadoc reports errors about invalid docs.
Modifications:
Fix some errors reported by javadoc.
Result:
A lot of javadoc errors are fixed by this patch.
Motivation:
There are some wrong links and tags in javadoc.
Modifications:
Fix the wrong links and tags in javadoc.
Result:
These links will work correctly in javadoc.
Motivation:
As a user may call deregister() from within any method while doing processing in the ChannelPipeline, we need to ensure we do the actual deregister operation later. This is needed as for example, we may be in the ByteToMessageDecoder.callDecode(...) method and so still try to do processing in the old EventLoop while the user already registered the Channel to a new EventLoop. Without delay, the deregister operation this could lead to have a handler invoked by different EventLoop and so threads.
Modifications:
Ensure the actual deregister will be done later on and not directly when invoked.
Result:
Calling deregister() within ByteToMessageDecoder.decode(..) is safe.
Motivation:
Estimation algorithm currently used for WriteTasks is complicated and
wrong. Additionally, some code relies on outbound buffer size
incremented only on actual writes to the outbound buffer.
Modifications:
- Throw away the old estimator and replace with a simple algorithm that
uses the client-provided estimator along with a statically configured
WriteTask overhead (io.netty.transport.writeTaskSizeOverhead system
property with the default value of 48 bytes)
- Add a io.netty.transport.estimateSizeOnSubmit boolean system property
allowing the clients to disable the message estimation outside the
event loop
Result:
Task estimation is user controllable and produces better results by
default
Motivation:
As discussed in #4529, NameResolver design shouldn't be resolving SocketAddresses (or String name + port) and return InetSocketAddresses. It should resolve String names and return InetAddresses.
This SocketAddress to InetSocketAddresses resolution is actually a different concern, used by Bootstrap.
Modifications:
Extract SocketAddress to InetSocketAddresses resolution concern to a new class hierarchy named AddressResolver.
These AddressResolvers delegate to NameResolvers.
Result:
Better separation of concerns.
Note that new AddressResolvers generate a bit more allocations because of the intermediate Promise and List<InetAddress>.
Motivation:
We need to remove all registered events for a Channel from the EventLoop before doing the actual close to ensure we not produce a cpu spin when the actual close operation is delayed or executed outside of the EventLoop.
Modifications:
Deregister for events for NIO and EPOLL socket implementations when SO_LINGER is used.
Result:
No more cpu spin.
Motivation:
Fix a race-condition when closing NioSocketChannel or EpollSocketChannel while try to detect if a close executor should be used and the underlying socket was already closed. This could lead to an exception that then leave the channel / in an invalid state and so could lead to side-effects like heavy CPU usage.
Modifications:
Catch possible socket exception while try to get the SO_LINGER options from the underlying socket.
Result:
No more race-condition when closing the channel is possible with bad side-effects.
Motivation:
ChannelMetadata has a field minMaxMessagesPerRead which can be confusing. There are also some cases where static instances are used and the default value for channel type is not being applied.
Modifications:
- use a default value which is set unconditionally to simplify
- make sure static instances of MaxMessagesRecvByteBufAllocator are not used if the intention is that the default maxMessagesPerRead should be derived from the channel type.
Result:
Less confusing interfaces in ChannelMetadata and ChannelConfig. Default maxMessagesPerRead is correctly applied.
Motivation:
The CoalescingBufferQueueTest is somewhat relaxed with its releasing of test buffers, using safeRelease to generically deal with tests that may or may not release the buffers. SafeRelease generates logs, however, when the release fails.
Modifications:
Tightened up the individual test methods to verify that the buffers are released properly.
Result:
Fixes#4497
Motivation:
The javadocs for ChannelOption.AUTO_CLOSE say the default is false, but the default is currently true.
Modifications:
- Make javadocs consistent with code
Result:
Less confusing docs.
Motivation:
exceptionCaught(...) will only handle inbound exceptions which means it makes not much sense to have it also on ChannelOutboundHandler. Because of this we should move it to ChannelInboundHandler.
Modifications:
Add @deprecated annotation to ChannelHandler.exceptionCaught(...).
Result:
Preapre to cleanup the API in later release.
Motivation:
We should use OneTimeTask where possible to reduce object creation.
Modifications:
Replace Runnable with OneTimeTask
Result:
Less object creation
Motivation:
We not need to store another reference to AbstractChannel as we can access it through DefaultChannelHandlerContext.
Modifications:
Remove reference.
Result:
Cleaner code.
Motivation:
If you start to have 1M+ concurrent connections memory footprint can be come a big issue. We should try to reduce it as much as possible in the core of netty.
Modifications:
- Remove HashMap that was used to store name to ctx mapping. This was only used for validation and access a handler by name. As a pipeline is not expected to be very long (like 100+ handlers) we can just walk the linked list structure to find the ctx with a given name.
Result:
Less memory footprint of the DefaultChannelPipeline.
Motivation:
The previous DefaultChannelPipeline#destroy() implementation, introduced in #3156, is suboptimal as it can cause the for loop to continuously spin if the executor used by a given handler is unable to "recognize" the event loop.
It could be objected that it's the custom executor responsibility to properly implement the inEventLoop() method, but some implementetaions might not be able to do that for performance reasons, and even so, it's always better to be safe against API misuse, in particular when it is not possible to fail fast and the alternative is rather some sutle behaviour.
Modifications:
The patch simply avoids the recursive spin by explicitly passing the "in event loop" condition as a boolean parameter, preserving the same guarantees offered by #3156. A unit test has also been added.
Result:
All channel events are correctly called and no high CPU usage is seen anymore.
Motivation:
Changing the chache of generated names to use a cache per thread. This will remove the bottleneck when many eventloops are used and names need to generate.
Modifications:
Use a FastThreadLocal to store the cached names.
Result:
Less locking between threads.
Motivation:
We should only call ReferenceCountUtil.touch(...) if needed as otherwise we pay the overhead of instanceof and cast
everytime.
Modifications:
Add boolean flag which indicates if touch(...) should be called.
Result:
Less overhead when leak detection is not enabled.
Motiviation:
If a user writes from outside the EventLoop we increase the pending bytes of the outbound buffer before submitting the write request. This is done so the user can stop writing asap once the channel turns unwritable. Unfortunally this doesn't take the overhead of adding the task into the account and so it is very easy for an user to full up the task queue. Beside this we use a value of 0 for an unown message by default which is not ideal.
Modifications:
- port the message calculation we used in netty 3.x into AbstractChannelHandlerContext and so better calculate the overhead of a message that is submitted from outside the EventLoop
- change the default estimated size for an unknown message to 8.
Result:
Better behaviour when submiting writes from outside the EventLoop.
Motivation:
Once a FixedChannelPool was closed we must not allow to acquire or release Channels to prevent assert errors.
Modifications:
Fail release and acquire calls when FixedChannelPool is closed.
Result:
No more assert errors.1
Motivation:
As MaxMessageHandle is stateful we can not share the same HandleImpl instance as otherwise we will see race conditions.
Modifications:
Create a new HandleImpl instance on each newHandle() call.
Result:
No more races.
Motivation:
EmbeddedChannelId#hashCode() and equals() do not behave correctly if an
instance is serialized and then deserialized. Additionally,
EmbeddedChannel does not allow use of any other type of ChannelId, and
EmbeddedChannelId is (mostly) a singleton instance. This creates a
problem for unit tests that construct multiple EmbeddedChannels and
expect each channel to have a unique ID.
Modifications:
EmbeddedChannelId is modified so equals() will return true and
hashCode() will return the same value for any instance of the class.
EmbeddedChannel is modified to allow a ChannelId to be specified when
the channel is constructed. Tests added for both changes.
Result:
EmbeddedChannelId now behaves correctly when deserialized, and
EmbeddedChannels can now have unique IDs.
Motivation:
PendingWriteQueueTest needs some cleanup.
Modifications:
- Cleanup code to remove deprecation warnings
- use static imports
Result:
No more warnings
Motivation:
We missed to run all pending tasks when EmbeddedChannel.close(...) or disconnect(...) was called. Because of this channelInactive(...) / channelUnregistered(...) of the handlers were never called.
Modifications:
Correctly run all pending tasks and cancel all not ready scheduled tasks when close or disconnect was called.
Result:
Correctly run tasks on close / disconnect and have channelInactive(...) / channelUnregistered(...) called.
Motiviation:
We need to ensure the actual close to the transport takes place before the promsie of the write is notified that triggered it. This is needed as otherwise Channel.isActive(), isOpen() and isWritable() may return true even if the Channel should be closed already.
Modifications:
- Ensure the close takes place first
Result:
ChannelFutureListener will see the correct state of the Channel.
Motivation:
writeBytes(...) missed to set EPOLLOUT flag when not all bytes were written. This could lead to have the EpollEventLoop not try to flush the remaining bytes once the socket becomes writable again.
Modifications:
- Move setting EPOLLOUT flag logic to one point so we are sure we always do it.
- Move OP_WRITE flag logic to one point as well.
Result:
Correctly try to write pending data if socket becomes writable again.
Motivation:
RecvByteBufAllocator.DelegatingHandle does not provide an accessor to get the delegate handle. This may be useful for classes that extend DelegatingHandle.
Modifications:
- add delegate() method to DelegatingHandle
Result:
Classes which inherit from DelegatingHandle can now access the delegate Handle.
Motivation:
If LocalChannel doWrite executes while the peer's state changes from CONNECTED to CLOSED it is possible that some promise's won't be completed and buffers will be leaked.
Modifications:
- Check the peer's state in doWrite to avoid a race condition
Result:
All write operations should release, and the associated promise should be completed.
Motivation:
https://github.com/netty/netty/pull/4143 addressed a few ordering issues but an ordering issue still remained if the Promise for a write completes, and a listener of that promise does a write on a peer channel. The ordering was subject to how potentially 2 different executors would run a task, but it should be coordinated such that the first write is read first.
Modifications:
- Keep track of the finishPeerRead task run on the executor if necessary and ensure it completes before current channel read occurs
Result:
Ordering of events for echo type situations is preserved.
Motivation:
When a LocalChannel write operation occurs, the promise associated with the write operation is marked successful when it is added to the peer's queue, but before the peer has actually received the data. If the promise callback closes the channel then a race condition exists where the close event may occur before the data is delivered. We should preserve ordering of events.
Modifications:
- LocalChannel should track when a write is in progress, and if a close operation happens make sure the peer gets all pending read operations.
Result:
LocalChannel preserves order of operations.
Fixes https://github.com/netty/netty/issues/4118
Motivation:
Doc of ChannelGroup says, that it can be used to manage server and child channels at once.
However, in DefaultChannelGroup, there is a race condition. When a server channel accepts a child, it schedules its
registration on an event loop, which takes some time. If the ChannelGroup, which is supposed
to close server and child channels at once, is closed after the child channel has been scheduled
for registration and before this registration actually happens, this child channel is not closed
and remains connected. This could lead to connection leaks.
Modifications:
To fix this, the DefaultChannelGroup is changed to has a closed flag.
This flag is set to true, just before the close() method is actually closing channels.
The add() method checks after adding a new channel, if this flag has been set to true.
If yes, the new channel is closed. If not, we have the guarantee, that this channel will be
closed by the ChannelGroup, because setting the closed flag to true happens-before closing any channels.
This behaviour can be activated by two new constructors. The old constructors are still there and behave like before.
Therefore, no existing code should be affected directly.
Result:
If activating this feature, the DefaultChannelGroup can be used, for managing server and child channels at once.
But this activating this feature means also, that a ChannelGroup cannot be reused after calling close().
Related issues:
- #3971
- #3973
- #3976
- #4035
Motivation:
1. Previously, DnsNameResolver.query() retried the request query by its
own. It prevents a user from deciding when to retry or stop. It is also
impossible to get the response object whose code is not NOERROR.
2. NameResolver does not have an operation that resolves a host name
into multiple addresses, like InetAddress.getAllByName()
Modifications:
- Changes related with DnsNameResolver.query()
- Make query() not retry
- Move the retry logic to DnsNameResolver.resolve() instead.
- Make query() fail the promise only when I/O error occurred or it
failed to get a response
- Add DnsNameResolverException and use it when query() fails so that
the resolver can give more information about the failure
- query() does not cache anymore.
- Changes related with NameResolver.resolveAll()
- Add NameResolver.resolveAll()
- Add SimpleNameResolver.doResolveAll()
- Changes related with DnsNameResolver.resolve() and resolveAll()
- Make DnsNameResolveContext abstract so that DnsNameResolver can
decide to get single or multiple addresses from it
- Re-implement cache so that the cache works for resolve() and
resolveAll()
- Add 'traceEnabled' property to enable/disable trace information
- Miscellaneous changes
- Use ObjectUtil.checkNotNull() wherever possible
- Add InternetProtocolFamily.addressType() to remove repetitive
switch-case blocks in DnsNameResolver(Context)
- Do not raise an exception when decoding a truncated DNS response
Result:
- Full control over query()
- A user can now retrieve all addresses via (Dns)NameResolver.resolveAll()
- DNS cache works only for resolve() and resolveAll() now.
