Commit Graph

505 Commits

Author SHA1 Message Date
Carl Mastrangelo
9abeaf16fd Properly debounce wakeups (#9191)
Motivation:
The wakeup logic in EpollEventLoop is overly complex

Modification:
* Simplify the race to wakeup the loop
* Dont let the event loop wake up itself (it's already awake!)
* Make event loop check if there are any more tasks after preparing to
sleep.  There is small window where the non-eventloop writers can issue
eventfd writes here, but that is okay.

Result:
Cleaner wakeup logic.

Benchmarks:

```
BEFORE
Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  408381.411 ± 2857.498  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  157022.360 ± 1240.573  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   60571.704 ±  331.125  ops/s

Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  440546.953 ± 1652.823  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  168114.751 ± 1176.609  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   61231.878 ±  520.108  ops/s
```
2019-06-04 05:17:23 -07:00
Norman Maurer
f6cf681f90
Don't read from timerfd and eventfd on each EventLoop tick (#9192)
Motivation:

We do not need to issue a read on timerfd and eventfd when the EventLoop wakes up if we register these as Edge-Triggered. This removes the overhead of 2 syscalls and so helps to reduce latency.

Modifications:

- Ensure we register the timerfd and eventfd with EPOLLET flag
- If eventfd_write fails with EAGAIN, call eventfd_read and try eventfd_write again as we only use it as wake-up mechanism.

Result:

Less syscalls and so reducing overhead.

Co-authored-by: Carl Mastrangelo <carl@carlmastrangelo.com>
2019-05-31 06:59:39 +02:00
Norman Maurer
e17ce934da
Correctly detect InternetProtocolFamily when EpollDatagramChannel is created with existing FileDescriptor (#9185)
Motivation:

When EpollDatagramChannel is created with an existing FileDescriptor we should detect the correct InternetProtocolFamily.

Modifications:

Obtain the InternetProtocolFamily from the given FD

Result:

Use correct InternetProtocolFamily when EpollDatagramChannel is created via existing FileDescriptor
2019-05-26 20:22:55 +02:00
Steve Buzzard
70731bfa7e Added UDP multicast (with caveats: getInterface, getNetworkInterface, block or loopback-mode-disabled operations).
Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for common use cases.

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-25 08:00:16 +02:00
Julien Viet
e348bd9217 KQueueEventLoop | EpollEventLoop may incorrectly update registration when FD is reused.
Motivation:

The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.

Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.

As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.

The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed

Modifications:

- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop

Result:

KQueue and Epoll native transports correctly handle FD reuse

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-22 09:23:09 +02:00
Norman Maurer
f17bfd0f64
Only use static Exception instances when we can ensure addSuppressed … (#9152)
Motivation:

OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.

Modifications:

Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.

Result:

Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
2019-05-17 22:23:02 +02:00
root
ba06eafa1c [maven-release-plugin] prepare for next development iteration 2019-04-30 16:42:29 +00:00
root
49a451101c [maven-release-plugin] prepare release netty-4.1.36.Final 2019-04-30 16:41:28 +00:00
Nick Hill
6248b2492b Remove static wildcard imports in EpollDomainSocketChannelConfig (#9066)
Motivation

These aren't needed, only one field from each class is used. It also showed as an ambiguous identifier compilation error in my IDE even though javac is obviously fine with it.

Modifications

Static-import explicit ChannelOption fields in EpollDomainSocketChannelConfig instead of using .* wildcard.

Result

Cleaner / more consistent code.
2019-04-18 07:33:44 +02:00
root
baab215f66 [maven-release-plugin] prepare for next development iteration 2019-04-17 07:26:24 +00:00
root
dfe657e2d4 [maven-release-plugin] prepare release netty-4.1.35.Final 2019-04-17 07:25:40 +00:00
Nick Hill
9ed41db1d7 Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle (#9060)
Motivation

These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.

Modifications

Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.

Result

Less code.
2019-04-16 09:14:09 +02:00
Norman Maurer
86dd388637 Revert "Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)"
This reverts commit a3e8c86741 as there are some issues that need to be fixed first.
2019-04-12 21:32:22 +02:00
Norman Maurer
fcfa9eb9a8
Throw IOException (not ChannelException) if netty_epoll_linuxsocket_setTcpMd5Sig fails (#9039)
Motivation:

At the moment we throw a ChannelException if netty_epoll_linuxsocket_setTcpMd5Sig fails. This is inconsistent with other methods which throw a IOException.

Modifications:

Throw IOException

Result:

More correct and consistent exception usage in epoll transport
2019-04-12 15:15:27 +02:00
Norman Maurer
778ff2057e
Add IPv6 multicast test to testsuite (#9037)
Motivation:

We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.

Modifications:

- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.

Result:

Better test coverage
2019-04-12 12:29:08 +02:00
Norman Maurer
45b0daf9e6
netty_epoll_linuxsocket_setTcpMd5Sig should throw ChannelException when not able to init sockaddr (#9029)
Motivation:

When netty_epoll_linuxsocket_setTcpMd5Sig fails to init the sockaddr we should throw an exception and not silently return.

Modifications:

Throw exception if init of sockaddr fails.

Result:

Correctly report back error to user.
2019-04-11 18:50:16 +02:00
Steve Buzzard
a3e8c86741 Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)
…nterface, block or loopback-mode-disabled operations).


Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
2019-04-08 20:13:39 +02:00
Vladimir Kostyukov
0a0da67f43 Introduce SingleThreadEventLoop.registeredChannels (#8428)
Motivation:

Systems depending on Netty may benefit (telemetry, alternative even loop scheduling algorithms) from knowing the number of channels assigned to each EventLoop.

Modification:

Expose the number of channels registered in the EventLoop via SingleThreadEventLoop.registeredChannels.

Result:

Fixes #8276.
2019-03-28 11:33:12 +00:00
Norman Maurer
8206604003
Upgrade to new netty-build and com.puppycrawl.tools 8.18 (#8980)
Motivation:

com.puppycrawl.tools checkstyle < 8.18 was reported to contain a possible security flaw. We should upgrade.

Modifications:

- Upgrade netty-build and checkstyle.
- Fix checkstyle errors

Result:

Fixes https://github.com/netty/netty/issues/8968.
2019-03-26 14:21:34 +01:00
Lunfu Zhong
e7b3195570 Support ALLOW_HALF_CLOSURE channel option on Unix domain socket. (#8932)
Motivation:

Since DomainSocketChannel is a DuplexChannel,  which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.

I thought this could be a missing feature of Unix domain socket, so here the PR for it.

Modifications:

1. Added allHalfClosure property both in  EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.

Result:

ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
2019-03-19 11:24:07 +01:00
Norman Maurer
5eb91d9ca1
Remove --add-opens=java.base/java.nio=ALL-UNNAMED when running tests as it is not needed anymore since a long time (#8934)
Motivation:

At some point we needed --add-opens=java.base/java.nio=ALL-UNNAMED to run our native tests but this is not true anymore.

Modifications:

Remove --add-opens=java.base/java.nio=ALL-UNNAMED when running native tests.

Result:

Remove obsolate jvm arg.
2019-03-13 08:25:10 +01:00
root
92b19cfedd [maven-release-plugin] prepare for next development iteration 2019-03-08 08:55:45 +00:00
root
ff7a9fa091 [maven-release-plugin] prepare release netty-4.1.34.Final 2019-03-08 08:51:34 +00:00
Norman Maurer
81e43d5088
DefaultFileRegion.transferTo with invalid count may cause busy-spin (#8885)
Motivation:

`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.

Modifications:

- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite

Result:

Fixes https://github.com/netty/netty/issues/8868.
2019-02-26 11:08:09 +01:00
Norman Maurer
fa6a8cb09c
Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 09:47:44 +01:00
Norman Maurer
c6a90d90a6
Add more tests to KQueue and Epoll testsuites. (#8851)
Motivation:

We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.

Modifications:

Extend tests and so run these for our native transports as well.

Result:

More tests.
2019-02-08 20:08:34 +01:00
Norman Maurer
7f61055cbd
Reduce direct memory overhead per EpollEventLoop when using EpollDatagramChannel (#8825)
Motivation:

When using a linux distribution that supports sendmmsg(...) we allocated enough direct memory per EpollEventLoop to be able to write IOV_MAX number of iovecs per message that can be written per sendmmsg.
The number of messages that can be written per sendmmsg(...) call is limited by UIO_MAX_IOV.

In practice this resulted in an allocation of 16MB direct memory per EpollEventLoop instance that stayed allocated until the EpollEventLoop was shutdown which happens as part of the shutdown of the enclosing EpollEVentLoopGroup.

This resulted in quite some heavy direct memory usage in practice even when in practice we have very slim changes to ever need all of the memory.

Modification:

Adjust NativeDatagramPacketArray to share one IovArray instance across all NativeDatagramPacket instances it holds. This limits the max number of iovecs we can write across all messages to IOV_MAX per sendmmsg(...) call.
This in practice will still be enough to allow us to write multiple messages with one syscall while keep the memory overhead to a minimum.

Result:

Smaller direct memory footprint per EpollEventLoop when using EpollDatagramChannel on distributions that support sendmmsg(...).
Fixes https://github.com/netty/netty/issues/8814
2019-02-02 07:10:02 +01:00
Norman Maurer
7bba4f49cf
Reduce GC produced by native DatagramChannel implementations when in connected mode. (#8806)
Motivation:

In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...)  method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.

Modifications:

- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.

Result:

Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
2019-02-01 10:29:36 +01:00
田欧
a33200ca38 use checkPositive/checkPositiveOrZero (#8803)
Motivation:

We have a utility method to check for > 0 and >0 arguments. We should use it.

Modification:

use checkPositive/checkPositiveOrZero instead of if statement.

Result:

Re-use utility method.
2019-01-31 09:07:14 +01:00
Norman Maurer
cd3254df88
Update to new checkstyle plugin (#8777) (#8780)
Motivation:

We need to update to a new checkstyle plugin to allow the usage of lambdas.

Modifications:

- Update to new plugin version.
- Fix checkstyle problems.

Result:

Be able to use checkstyle plugin which supports new Java syntax.
2019-01-25 11:58:42 +01:00
root
cf03ed0478 [maven-release-plugin] prepare for next development iteration 2019-01-21 12:26:44 +00:00
root
37484635cb [maven-release-plugin] prepare release netty-4.1.33.Final 2019-01-21 12:26:12 +00:00
yulianoifa-mobius
1e4481e551 Allowed IP_FREEBIND option for UDP epoll (#8728)
Motivation:

While using Load Balancers or HA support is needed there are cases when UDP channel need to bind to IP Address which is not available on network interfaces locally.

Modification:

Modified EpollDatagramChannelConfig to allow IP_FREEBIND option

Result:

Fixes ##8727.
2019-01-21 07:42:05 +01:00
Dmitriy Dumanskiy
165912365a Clenaup: simplify EpollEventLoop.closeAll() (#8719)
Motivation:

Avoid unnecessary iteration and `ArrayList` allocation.

Modification:

```
for (AbstractEpollChannel channel: channels.values()) {
     array.add(channel);
}
```
replaced with 

`array.addAll(channels.values())`

and

```
Collection<AbstractEpollChannel> array = new ArrayList<AbstractEpollChannel>(channels.size());
array.addAll(channels.values())
```

replaced with:

`AbstractEpollChannel[] localChannels = channels.values().toArray(new AbstractEpollChannel[0]);`

Result:

Simpler code in `EpollEventLoop.closeAll();`
2019-01-16 11:00:25 +01:00
Feri73
5df235c083 Correcting Maven Dependencies (#8622)
Motivation:

Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.

Modifications:

For all maven modules, add all of their dependencies to pom.xml

Result:

All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
2018-12-06 09:01:14 +01:00
root
8eb313072e [maven-release-plugin] prepare for next development iteration 2018-11-29 11:15:09 +00:00
root
afcb4a37d3 [maven-release-plugin] prepare release netty-4.1.32.Final 2018-11-29 11:14:20 +00:00
Norman Maurer
d4b1202e62
Add testcase for epollWait(...) with negative timerfd values. (#8447)
Motivation:

https://github.com/netty/netty/issues/8444 reports that there is some issue with negative values passed to timerfd_settime. This test verifies that everything is working as expected.

Modifications:

Add testcase.

Result:

Test to verify expected behaviour.
2018-10-30 19:38:02 +01:00
root
3e7ddb36c7 [maven-release-plugin] prepare for next development iteration 2018-10-29 15:38:51 +00:00
root
9e50739601 [maven-release-plugin] prepare release netty-4.1.31.Final 2018-10-29 15:37:47 +00:00
Johno Crawford
5b3b8db07f epoll_wait produces an EINVAL error since 4.1.30 (#8350)
Motivation:

epoll_wait should work in 4.1.30 like it did in 4.1.29.

Modifications:

Revert Integer.MAX_VALUE back to MAX_SCHEDULED_TIMERFD_NS (999,999,999).
Add unit test.

Result:

epoll_wait will no longer throw EINVAL.
2018-10-12 05:02:41 +02:00
Matteo Merli
3a96e7373b Added option to do busy-wait on epoll (#8267)
Motivation:

Add an option (through a SelectStrategy return code) to have the Netty event loop thread to do busy-wait on the epoll.

The reason for this change is to avoid the context switch cost that comes when the event loop thread is blocked on the epoll_wait() call.

On average, the context switch has a penalty of ~13usec.

This benefits both:

The latency when reading from a socket
Scheduling tasks to be executed on the event loop thread.
The tradeoff, when enabling this feature, is that the event loop thread will be using 100% cpu, even when inactive.

Modification:

Added SelectStrategy option to return BUSY_WAIT
Epoll loop will do a epoll_wait() with no timeout
Use pause instruction to hint to processor that we're in a busy loop
Result:

When enabled, minimizes impact of context switch in the critical path
2018-09-28 22:52:00 +02:00
Roger
6138541033 Avoid repeating the same field and hiding it (#8335)
Motivation

The EpollChannelConfig (same for KQueues) and its subclasses repeatetly declare their own channel field which leads to a 3x repetition for each config instance. Given the fields are protected or package-private it's exposing the code code to "field hiding" bugs.

Modifications

Use the the existing protected channel field from the DefaultChannelConfig class and simply cast it when needed.

Result

Fixes #8331
2018-09-28 17:37:14 +02:00
root
2d7cb47edd [maven-release-plugin] prepare for next development iteration 2018-09-27 19:00:45 +00:00
root
3a9ac829d5 [maven-release-plugin] prepare release netty-4.1.30.Final 2018-09-27 18:56:12 +00:00
Carl Mastrangelo
1dff107de1 Don't re-arm timerfd each epoll_wait (#7816)
Motivation:
The Epoll transport checks to see if there are any scheduled tasks
before entering epoll_wait, and resets the timerfd just before.
This causes an extra syscall to timerfd_settime before doing any
actual work.   When scheduled tasks aren't added frequently, or
tasks are added with later deadlines, this is unnecessary.

Modification:
Check the *deadline* of the peeked task in EpollEventLoop, rather
than the *delay*.  If it hasn't changed since last time, don't
re-arm the timer

Result:
About 2us faster on gRPC RTT 50pct latency benchmarks.

Before (2 runs for 5 minutes, 1 minute of warmup):

```
50.0%ile Latency (in nanos):		64267
90.0%ile Latency (in nanos):		72851
95.0%ile Latency (in nanos):		78903
99.0%ile Latency (in nanos):		92327
99.9%ile Latency (in nanos):		119691
100.0%ile Latency (in nanos):		13347327
QPS:                           14933

50.0%ile Latency (in nanos):		63907
90.0%ile Latency (in nanos):		73055
95.0%ile Latency (in nanos):		79443
99.0%ile Latency (in nanos):		93739
99.9%ile Latency (in nanos):		123583
100.0%ile Latency (in nanos):		14028287
QPS:                           14936
```

After:
```
50.0%ile Latency (in nanos):		62123
90.0%ile Latency (in nanos):		70795
95.0%ile Latency (in nanos):		76895
99.0%ile Latency (in nanos):		90887
99.9%ile Latency (in nanos):		117819
100.0%ile Latency (in nanos):		14126591
QPS:                           15387

50.0%ile Latency (in nanos):		61021
90.0%ile Latency (in nanos):		70311
95.0%ile Latency (in nanos):		76687
99.0%ile Latency (in nanos):		90887
99.9%ile Latency (in nanos):		119527
100.0%ile Latency (in nanos):		6351615
QPS:                           15571
```
2018-09-11 13:38:38 +02:00
Matteo Merli
2a1596a4e9 Allow to configure socket option SO_BUSY_POLL (#8268)
Motivation:

When using Epoll based transport, allow applications to configure SO_BUSY_POLL socket option:

       SO_BUSY_POLL (since Linux 3.11)
              Sets the approximate time in microseconds to busy poll on a
              blocking receive when there is no data.  Increasing this value
              requires CAP_NET_ADMIN.  The default for this option is con‐
              trolled by the /proc/sys/net/core/busy_read file.

              The value in the /proc/sys/net/core/busy_poll file determines
              how long select(2) and poll(2) will busy poll when they oper‐
              ate on sockets with SO_BUSY_POLL set and no events to report
              are found.

              In both cases, busy polling will only be done when the socket
              last received data from a network device that supports this
              option.

              While busy polling may improve latency of some applications,
              care must be taken when using it since this will increase both
              CPU utilization and power usage.

Modification:

Added SO_BUSY_POLL socket option
Result:

Able to configure SO_BUSY_POLL from Netty
2018-09-07 20:50:51 +02:00
Norman Maurer
b73f785631
We should call the UnLoad methods when we detect an error during calling OnLoad (#8237)
Motivation:

We should ensure we call *UnLoad when we detect an error during calling *OnLoad and previous *OnLoad calls were succesfull.

Modifications:

Correctly call *UnLoad when needed.

Result:

More correct code and no leaks when an error happens during loading the native lib.
2018-08-30 06:56:42 +02:00
Norman Maurer
54f565ac67
Allow to use native transports when sun.misc.Unsafe is not present on… (#8231)
* Allow to use native transports when sun.misc.Unsafe is not present on the system

Motivation:

We should be able to use the native transports (epoll / kqueue) even when sun.misc.Unsafe is not present on the system. This is especially important as Java11 will be released soon and does not allow access to it by default.

Modifications:

- Correctly disable usage of sun.misc.Unsafe when -PnoUnsafe is used while running the build
- Correctly increment metric when UnpooledDirectByteBuf is allocated. This was uncovered once -PnoUnsafe usage was fixed.
- Implement fallbacks in all our native transport code for when sun.misc.Unsafe is not present.

Result:

Fixes https://github.com/netty/netty/issues/8229.
2018-08-29 19:36:33 +02:00
root
a580dc7585 [maven-release-plugin] prepare for next development iteration 2018-08-24 06:36:33 +00:00
root
3fc789e83f [maven-release-plugin] prepare release netty-4.1.29.Final 2018-08-24 06:36:06 +00:00
Norman Maurer
ea4c315b45
Ensure multiple shaded version of the same netty artifact can be loaded as long as the shaded prefix is different (#8207)
Motivation:

We should support to load multiple shaded versions of the same netty artifact as netty is often used in multiple dependencies.

This is related to https://github.com/netty/netty/issues/7272.

Modifications:

- Use -fvisibility=hidden when compiling and use JNIEXPORT for things we really want to have exported
- Ensure fields are declared as static so these are not exported
- Adjust testsuite-shading to use install_name_tool on MacOS to change the id of the lib. Otherwise the wrong may be used.

Result:

Be able to use multiple shaded versions of the same netty artifact.
2018-08-21 07:53:45 +02:00
Ziyan Mo
785473788f (Nio|Epoll)EventLoop.pendingTasks does not need to dispatch to the EventLoop (#8197)
Motivation:

EventLoop.pendingTasks should be (reasonably) cheap to invoke so it can be used within observability. 

Modifications:

Remove code that dispatch access to the internal taskqueue to the EventLoop when invoked as this is not needed anymore with the current MPSC queues we are using. 

See https://github.com/netty/netty/issues/8196#issuecomment-413653286.

Result:

Fixes https://github.com/netty/netty/issues/8196
2018-08-18 07:28:31 +02:00
Nick Hill
630c82717d Lazy initialize NativeDatagramPacketArray and IovArray in EpollEventLoop (#8160)
Motivation:

Avoid unnecessary native memory allocation if UDP / TCP isn't being
used.

Modifications:

Create the reused NativeDatagramPacketArray and IovArray upon first use
instead of EpollEventLoop construction.

Also correct related comment in NativeDatagramPacketArray.

Result:

Reduced native memory use when using epoll in many cases
2018-07-29 18:22:27 +08:00
root
fcb19cb589 [maven-release-plugin] prepare for next development iteration 2018-07-27 04:59:28 +00:00
root
ff785fbe39 [maven-release-plugin] prepare release netty-4.1.28.Final 2018-07-27 04:59:06 +00:00
root
b4dbdc2036 [maven-release-plugin] prepare for next development iteration 2018-07-11 15:37:40 +00:00
root
1c16519ac8 [maven-release-plugin] prepare release netty-4.1.27.Final 2018-07-11 15:37:21 +00:00
root
7bb9e7eafe [maven-release-plugin] prepare for next development iteration 2018-07-10 05:21:24 +00:00
root
8ca5421bd2 [maven-release-plugin] prepare release netty-4.1.26.Final 2018-07-10 05:18:13 +00:00
Norman Maurer
05e5ab1ecb Store NativeDatagramPacketArray directly in the EpollEventLoop
Motivation:

We can store the NativeDatagramPacketArray directly in the EpollEventLoop. This removes the need of using FastThreadLocal.

Modifications:

- Store NativeDatagramPacketArray directly in the EpollEventLoop (just as we do with IovArray as well).

Result:

Less FastThreadLocal usage and more consistent code.
2018-06-27 20:52:28 +02:00
Scott Mitchell
12f6500a4f Epoll and Kqueue shouldn't read by default (#8024)
Motivation:
Epoll and Kqueue channels have internal state which forces
a single read operation after channel construction. This
violates the Channel#read() interface which indicates that
data shouldn't be delivered until this method is called.
The behavior is also inconsistent with the NIO transport.

Modifications:
- Epoll and Kqueue shouldn't unconditionally read upon
initialization, and instead should rely upon Channel#read()
or auto_read.

Result:
Epoll and Kqueue are more consistent with NIO.
2018-06-15 10:28:50 +02:00
Norman Maurer
d133bf06a4
Allow to schedule tasks up to Long.MAX_VALUE (#7972)
Motivation:

We should allow to schedule tasks with a delay up to Long.MAX_VALUE as we did pre 4.1.25.Final.

Modifications:

Just ensure we not overflow and put the correct max limits in place when schedule a timer. At worse we will get a wakeup to early and then schedule a new timeout.

Result:

Fixes https://github.com/netty/netty/issues/7970.
2018-05-30 11:11:42 +02:00
Norman Maurer
030318e53c
Read until all data is consumed when EOF is detected even if readPend… (#7961)
* Read until all data is consumed when EOF is detected even if readPending is false and auto-read is disabled.

Motivation:

We should better always notify the user of EOF even if the user did not request any data as otherwise we may never be notified when the remote peer closes the connection. This should be ok as the amount of extra data we may read and so fire through the pipeline is limited by SO_RECVBUF.

Modifications:

- Always drain the socket when EOF is detected.
- Add testcase

Result:

No risk for the user to be not notified of EOF.
2018-05-24 20:29:29 +02:00
Norman Maurer
64bb279f47 [maven-release-plugin] prepare for next development iteration 2018-05-14 11:11:45 +00:00
Norman Maurer
c67a3b0507 [maven-release-plugin] prepare release netty-4.1.25.Final 2018-05-14 11:11:24 +00:00
Norman Maurer
358249e5c9
Allow to disable native transport and native ssl support via system property. (#7903)
Motivation:

Sometimes it's useful to disable native transports / native ssl to debug a problem. We should allow to do so with a system property so people not need to adjust code for this.

Modifications:

Add system properties which allow to disable native transport and native ssl.

Result:

Easier to disable native code usage without code changes.
2018-05-04 14:44:44 +02:00
Devrim Şahin
b818852cdb Update DatagramPacket.recipient() to return the actual destination IP (#7879)
Motivation:

DatagramPacket.recipient() doesn't return the actual destination IP, but the IP the app is bound to.

Modification:

- IP_RECVORIGDSTADDR option is enabled for UDP sockets, which allows retrieval of ancillary information containing the original recipient.
- _recvFrom(...) function from transport-native-unix-common/src/main/c/netty_unix_socket.c is modified such that if IP_RECVORIGDSTADDR is set, recvmsg is used instead of recvfrom; enabling the retrieval of the original recipient.
- DatagramSocketAddress also contains a 'local' address, representing the recipient.
- EpollDatagramChannel is updated to return the retrieved recipient address instead of the address the channel is bound to.

Result:

Fixes #4950.
2018-04-26 08:00:36 +02:00
Norman Maurer
b47fb81799
EventLoop.schedule with big delay fails (#7402)
Motivation:

Using a very huge delay when calling schedule(...) may cause an Selector error when calling select(...) later on. We should gaurd against such a big value.

Modifications:

- Add guard against a very huge value.
- Added tests.

Result:

Fixes [#7365]
2018-04-24 11:15:20 +02:00
Norman Maurer
b75f44db9a [maven-release-plugin] prepare for next development iteration 2018-04-19 11:56:07 +00:00
Norman Maurer
04fac00c8c [maven-release-plugin] prepare release netty-4.1.24.Final 2018-04-19 11:55:47 +00:00
Devrim Şahin
0b690a991f Added IP_TRANSPARENT option for UDP (#7872)
Motivation:

This allows netty to operate in 'transparent proxy' mode for UDP, intercepting connections
to other addresses by means of Linux firewalling rules, as per

https://www.kernel.org/doc/Documentation/networking/tproxy.txt


Modification:

Add IP_TRANSPARENT option.

Result:

Allows setting and getting of the IP_TRANSPARENT option, which allows retrieval of the ultimate socket address originally requested.
2018-04-17 09:07:02 +02:00
root
0a61f055f5 [maven-release-plugin] prepare for next development iteration 2018-04-04 10:44:46 +00:00
root
8c549bad38 [maven-release-plugin] prepare release netty-4.1.23.Final 2018-04-04 10:44:15 +00:00
Scott Mitchell
ed0668384b NIO read spin event loop spin when half closed (#7801)
Motivation:
AbstractNioByteChannel will detect that the remote end of the socket has
been closed and propagate a user event through the pipeline. However if
the user has auto read on, or calls read again, we may propagate the
same user events again. If the underlying transport continuously
notifies us that there is read activity this will happen in a spin loop
which consumes unnecessary CPU.

Modifications:
- AbstractNioByteChannel's unsafe read() should check if the input side
of the socket has been shutdown before processing the event. This is
consistent with EPOLL and KQUEUE transports.
- add unit test with @normanmaurer's help, and make transports consistent with respect to user events

Result:
No more read spin loop in NIO when the channel is half closed.
2018-03-28 20:02:57 +02:00
Norman Maurer
0a8e1aaf19 Flush task should not flush messages that were written since last flush attempt.
Motivation:

The flush task is currently using flush() which will have the affect of have the flush traverse the whole ChannelPipeline and also flush messages that were written since we gave up flushing. This is not really correct as we should only continue to flush messages that were flushed at the point in time when the flush task was submitted for execution if the user not explicit call flush() by him/herself.

Modification:

Call *Unsafe.flush0() via the flush task which will only continue flushing messages that were marked as flushed before.

Result:

More correct behaviour when the flush task is used.
2018-03-02 10:09:40 +09:00
Norman Maurer
69582c0b6c [maven-release-plugin] prepare for next development iteration 2018-02-21 12:52:33 +00:00
Norman Maurer
786f35c6c9 [maven-release-plugin] prepare release netty-4.1.22.Final 2018-02-21 12:52:19 +00:00
Scott Mitchell
ce241bd11e Epoll flush/writabilityChange deadlock
Motivation:
b215794de3 recently introduced a change in behavior where writeSpinCount provided a limit for how many write operations were attempted per flush operation. However when the write quantum was meet the selector write flag was not cleared, and the channel unsafe flush0 method has an optimization which prematurely exits if the write flag is set. This may lead to no write progress being made under the following scenario:
- flush is called, but the socket can't accept all data, we set the write flag
- the selector wakes us up because the socket is writable, we write data and use the writeSpinCount quantum
- we then schedule a flush() on the EventLoop to execute later, however it the flush0 optimization prematurely exits because the write flag is still set

In this scenario the socket is still writable so the EventLoop may never notify us that the socket is writable, and therefore we may never attempt to flush data to the OS.

Modifications:
- When the writeSpinCount quantum is exceeded we should clear the selector write flag

Result:
Fixes https://github.com/netty/netty/issues/7729
2018-02-20 11:40:58 +01:00
Norman Maurer
e71fa1e7b6 [maven-release-plugin] prepare for next development iteration 2018-02-05 12:02:35 +00:00
Norman Maurer
41ebb5fcca [maven-release-plugin] prepare release netty-4.1.21.Final 2018-02-05 12:02:19 +00:00
Norman Maurer
ea58dc7ac7 [maven-release-plugin] prepare for next development iteration 2018-01-21 12:53:51 +00:00
Norman Maurer
96c7132dee [maven-release-plugin] prepare release netty-4.1.20.Final 2018-01-21 12:53:34 +00:00
Scott Mitchell
33ddb83dc1
IovArray#add return value resulted in more ByteBufs being added during iteration
Motivation:
IovArray implements MessageProcessor, and the processMessage method will continue to be called during iteration until it returns true. A recent commit b215794de3 changed the return value to only return true if any component of a CompositeByteBuf was added as a result of the method call. However this results in the iteration continuing, and potentially subsequent smaller buffers maybe added, which will result in out of order writes and generally corrupts data.

Modifications:
- IovArray#add should return false so that the MessageProcessor#processMessage will stop iterating.

Result:
Native transports which use IovArray will not corrupt data during gathering writes of CompositeByteBuf objects.
2018-01-04 08:04:32 -08:00
Norman Maurer
264a5daa41 [maven-release-plugin] prepare for next development iteration 2017-12-15 13:10:54 +00:00
Norman Maurer
0786c4c8d9 [maven-release-plugin] prepare release netty-4.1.19.Final 2017-12-15 13:09:30 +00:00
Scott Mitchell
af2f343648
FileDescriptor writev core dump
Motivation:
FileDescriptor#writev calls JNI code, and that JNI code dereferences a NULL pointer which crashes the application. This occurs when writing a single CompositeByteBuf object with more than one component.

Modifications:
- Initialize the iovec iterator properly to avoid the core dump
- Fix the array length calculation if we aren't able to fit all the ByteBuffer objects in the iovec array

Result:
No more core dump.
2017-12-14 16:47:31 -08:00
Dmitriy Dumanskiy
8b3e98163d Added Automatic-Module-Name for native modules to support Java 9 modules
Motivation:

Latest netty missing predefined Automatic-Module-Name module name entry in MANIFEST.MF for native transports.

Modification:

Added Automatic-Module-Name entry to manifest during native transports build.

Fixes [#7501]
2017-12-14 19:41:45 +00:00
Norman Maurer
b2bc6407ab [maven-release-plugin] prepare for next development iteration 2017-12-08 09:26:15 +00:00
Norman Maurer
96732f47d8 [maven-release-plugin] prepare release netty-4.1.18.Final 2017-12-08 09:25:56 +00:00
Scott Mitchell
b215794de3
Enforce writeSpinCount to limit resource consumption per socket (#7478)
Motivation:
The writeSpinCount currently loops over the same buffer, gathering
write, file write, or other write operation multiple times but will
continue writing until there is nothing left or the OS doesn't accept
any data for that specific write. However if the OS keeps accepting
writes there is no way to limit how much time we spend on a specific
socket. This can lead to unfair consumption of resources dedicated to a
single socket.
We currently don't limit the amount of bytes we attempt to write per
gathering write. If there are many more bytes pending relative to the
SO_SNDBUF size we will end up building iov arrays with more elements
than can be written, which results in extra iteration, conditionals,
and book keeping.

Modifications:
- writeSpinCount should limit the number of system calls we make to
write data, instead of applying to individual write operations
- IovArray should support a maximum number of bytes
- IovArray should support composite buffers of greater than size 1024
- We should auto-scale the amount of data that we attempt to write per
gathering write operation relative to SO_SNDBUF and how much data is
successfully written
- The non-unsafe path should also support a maximum number of bytes,
and respect the IOV_MAX limit

Result:
Write resource consumption can be bounded and gathering writes have
a limit relative to the amount of data which can actually be accepted
by the socket.
2017-12-07 16:00:52 -08:00
Norman Maurer
3f101caa4c Not call java methods from within JNI init code to prevent class loading deadlocks.
Motivation:

We used NetUtil.isIpV4StackPreferred() when loading JNI code which tries to load NetworkInterface in its static initializer. Unfortunally a lock on the NetworkInterface class init may be already hold somewhere else which may cause a loader deadlock.

Modifications:

Add a new Socket.initialize() method that will be called when init the library and pass everything needed to the JNI level so we not need to call back to java.

Result:

Fixes [#7458].
2017-12-06 14:34:15 +01:00
Norman Maurer
251bb1a739 Not use safeRelease(...) but release(...) to release non-readable holders to ensure we not mask errors.
Motivation:

AbstractChannel attempts to "filter" messages which are written [1]. A goal of this process is to copy from heap to direct if necessary. However implementations of this method [2][3] may translate a buffer with 0 readable bytes to EMPTY_BUFFER. This may mask a user error where an empty buffer is written but already released.

Modifications:

Replace safeRelease(...) with release(...) to ensure we propagate reference count issues.

Result:

Fixes [#7383]
2017-12-04 20:38:35 +01:00
Tomasz Jędrzejewski
e8540c2b7a Adding stable JDK9 module names that follow reverse-DNS style
Automatic-Module-Name entry provides a stable JDK9 module name, when Netty is used in a modular JDK9 applications. More info: http://blog.joda.org/2017/05/java-se-9-jpms-automatic-modules.html

When Netty migrates to JDK9 in the future, the entry can be replaced by actual module-info descriptor.

Modification:

The POM-s are configured to put the correct module names to the manifest.

Result:

Fixes #7218.
2017-11-29 11:50:24 +01:00
Norman Maurer
b1cc5835ac Not directly call getsockopt but use exported helper function
Motivation:

To better isolate OS system calls we should not call getsockopt directly but use our netty_unix_socket_getOption0 function. See is a followup of f115bf5.

Modifications:

Export netty_unix_socket_getOption0 by declaring it in the header file and use it

Result:

Better isolation of system calls.
2017-11-22 08:40:44 +01:00
Norman Maurer
f115bf50cb EpollSocketChannelConfig.getOptions() must not throw if TCP_FASTOPEN_CONNECT is not supported
Motivation:

If a user calls EpollSocketChannelConfig.getOptions() and TCP_FASTOPEN_CONNECT is not supported we throw an exception.

Modifications:

- Just return 0 if ENOPROTOOPT is set.
- Add testcase

Result:

getOptions() works as epxected.
2017-11-16 14:07:54 +01:00
Norman Maurer
188ea59c9d [maven-release-plugin] prepare for next development iteration 2017-11-08 22:36:53 +00:00
Norman Maurer
812354cf1f [maven-release-plugin] prepare release netty-4.1.17.Final 2017-11-08 22:36:33 +00:00
Norman Maurer
e7f02b1dc0 Set readPending to false when EOF is detected while issue an read
Motivation:

We need to set readPending to false when we detect a EOF while issue a read as otherwise we may not unregister from the Selector / Epoll / KQueue and so keep on receving wakeups.

The important bit is that we may even get a wakeup for a read event but will still will only be able to read 0 bytes from the socket, so we need to be very careful when we clear the readPending. This can happen because we generally using edge-triggered mode for our native transports and because of the nature of edge-triggered we may schedule an read event just to find out there is nothing left to read atm (because we completely drained the socket on the previous read).

Modifications:

Set readPending to false when EOF is detected.

Result:

Fixes [#7255].
2017-11-06 15:44:36 -08:00
Norman Maurer
bcad9dbf97 Revert "Set readPending to false when ever a read is done"
This reverts commit 413c7c2cd8 as it introduced an regression when edge-triggered mode is used which is true for our native transports by default. With 413c7c2cd8 included it was possible that we set readPending to false by mistake even if we would be interested in read more.
2017-11-06 09:21:42 -08:00