Motivation:
Often the user uses EmbeddedChannel within unit tests where the only "important" thing is to know if any pending messages were in the buffer and then release these.
We should provide methods for this so the user not need to manually loop through these and release.
Modifications:
Add methods to easily handle releasing of messages.
Result:
Less boiler-plate code for the user to write.
Motivation:
If an error occurs during a write operation then DefaultHttp2ConnectionEncoder.FlowControlledData will clear the CoalescingBufferQueue which will reset the queue's readable bytes to 0. To recover from an error the DefaultHttp2RemoteFlowController will attempt to return bytes to the flow control window, but since the frame has reset its own size this will lead to invalid flow control accounting.
Modifications:
- DefaultHttp2ConnectionEncoder.FlowControlledData should not reset its size if an error occurs
Result:
No more flow controller errors due to DefaultHttp2ConnectionEncoder.FlowControlledData setting its size to 0 if an error occurs.
Motivation:
PromiseAggregator's API allows for the aggregate promise to complete before the user is done adding promises. In order to support this use case the API structure would need to change in a breaking manner.
Modifications:
- Deprecate PromiseAggregator and subclasses
- Introduce PromiseCombiner which corrects these issues
Result:
PromiseCombiner corrects the deficiencies in PromiseAggregator.
Motivation:
PendingWriteQueue should guard against re-entrant writes once
removeAndFailAll() is run.
Modifications:
removeAndFailAll() should repeat until the queue is finally empty.
Result:
assertEmpty() will always hold.
Motivation:
We should guard users from using Unsafe methods from outside the EventLoop if not designed to do so.
Modifications:
Add asserts
Result:
Easier for users to detect miss-use.
Motivation:
e2f5012 added unit tests which did not verify the buffer was released as it was intended to.
Modification:
- Unit tests must verify release is called
Result:
Unit tests enforce that ByteBufs are released.
Motivation:
DefaultChannelHandlerInvoker.invokeWrite calls a utility method validatePromise which may throw if the arguments are not valid. If this method throws then the message will not be released.
Modifications:
- If an exception is thrown the message should be released
Result:
No more leak in DefaultChannelHandlerInvoker.invokeWrite
Motivation:
See #3746.
Modifications:
Fork SpscLinkedQueue and SpscLinkedAtomicQueue from JCTools based on 7846450e28
Result:
Add SpscLinkedQueue and SpscLinkedAtomicQueue and apply it in LocalChannel.
Motiviation:
We should ensure that handlerAdded(...) and handlerRemoved(...) is always called from the EventExecutor that also invokes the other methods of the ChannelHandler. Also we need to ensure we always call handlerAdded(...) before any other method can be calld to ensure correct ordering.
Motifications:
- Ensure that the right thread is used to call the methods
- Ensure correct ordering
- Add tests
Result:
Respect the thread-model for handlerAdded(...) and handlerRemoved(...) and preserve correct ordering in all cases.
Motivation:
The implementation of obtaining the best possible mac address is very good. There are many sub-par implementations proposed on stackoverflow.
While not strictly a netty concern, it would be nice to offer this util also to netty users.
Modifications:
extract DefaultChannelId#defaultMachineId code obtaining the "best" mac into a new helper called MacAddress, keep the random bytes fallback in DefaultChannelID.
Result:
New helper available.
Motivation:
When a channel was registered before and is re-registered we need to respect ChannelConfig.isAutoRead() and so start reading one the registration task completes. This was done "by luck" before 15162202fb.
Modifications:
Explicit start reading once a Channel was re-registered if isAutoRead() is true.
Result:
Correctly receive data after re-registration completes.
Motivation:
Due a regression introduced by e969b6917c we missed to pass the original ChannelPromise to the next ChannelOutboundHandler and so
may never notify the origin ChannelPromise. This is related to #4805.
Modifications:
- Correctly pass the ChannelPromise
- Add unit test.
Result:
Correctly pass the ChannelPromise on deregister(...)
Motivation:
fix the issue netty#2944
Modifications:
use - instead of =>, use ! instead of :> due to the connection is bidirectional. What's more, toString() method don't know the direction or there is no need to know the direction when only log channel information.
add L： before local address and R: before remote address.
Result:
after the fix, log won't confuse the user
Motivation:
The AbstractChannel(Channel parent) constructor was previously hard-coded to always
call DefaultChannelId.newInstance(), and this made it difficult to use a custom
ChannelId implementation with some commonly used Channel implementations.
Modifications:
Introduced newId() method in AbstractChannel, which by default returns
DefaultChannelId.newInstance() but can be overridden by subclasses. Added
ensureDefaultChannelId() test to AbstractChannelTest, to ensure the prior
behavior of calling DefaultChannelId.newInstance() still holds with the
AbstractChannel(Channel parent) constructor.
Result:
AbstractChannel now has the protected newId() method, but there is no functional
difference.
Motivation:
A few implementations of OioServerChannel have a default max messages per read set to 16. We should set the default to 1 to prevent blocking on a read before setting a socket that has just been accepted.
Modifications:
- OioSctpServerChannel and OioServerSocketChannel metadata changed to use the default (1) max messages per read
Result:
Oio based servers will complete accepting a socket before potentially blocking waiting to accept other sockets.
Motivation:
If a user adds a ChannelHandler from outside the EventLoop it is possible to get into the situation that handlerAdded(...) is scheduled on the EventLoop and so called after another methods of the ChannelHandler as the EventLoop may already be executing on this point in time.
Modification:
- Ensure we always check if the handlerAdded(...) method was called already and if not add the currently needed call to the EventLoop so it will be picked up after handlerAdded(...) was called. This works as if the handler is added to the ChannelPipeline from outside the EventLoop the actual handlerAdded(...) operation is scheduled on the EventLoop.
- Some cleanup in the DefaultChannelPipeline
Result:
Correctly order of method executions of ChannelHandler.
Motivation:
ChannelOutboundHandlerAdapter's javadoc has some minor issues.
Modifications:
Fix the minor javadoc issues and resolves#4752.
Result:
ChannelOutboundHandlerAdapter's javadoc issues are fixed.
Motivation:
Being able to access the invoker() is useful when adding additional
handlers that should be running in the same thread. Since an application
may be using a threading model unsupported by the default invoker, they
can specify their own. Because of that, in a handler that auto-adds
other handlers:
// This is a good pattern
ctx.pipeline().addBefore(ctx.invoker(), ctx.name(), null, newHandler);
// This will generally work, but prevents using custom invoker.
ctx.pipeline().addBefore(ctx.executor(), ctx.name(), null, newHandler);
That's why I believe in commit 110745b0, for the now-defunct 5.0 branch,
when ChannelHandlerAppender was added the invoker() method was also
necessary.
There is a side-benefit to exposing the invoker: in certain advanced
use-cases using the invoker for a particular handler is useful. Using
the invoker you are able to invoke a _particular_ handler, from possibly
a different thread yet still using standard exception processing.
ChannelHandlerContext does part of that, but is unwieldy when trying to
invoke a particular handler because it invokes the prev or next handler,
not the one the context is for. A workaround is to use the next or prev
context (respectively), but this breaks when the pipeline changes.
This came up during writing the Http2MultiplexCodec which uses a
separate child channel for each http/2 stream and wants to send messages
from the child channel directly to the Http2MultiplexCodec handler that
created it.
Modifications:
Add the invoker() method to ChannelHandlerContext. It was already being
implemented by AbstractChannelHandlerContext. The two other
implementations of ChannelHandlerContext needed minor tweaks.
Result:
Access to the invoker used for a particular handler, for either reusing
for other handlers or for advanced use-cases. Fixes#4738
Motivation:
ChannelInboundHandler and ChannelOutboundHandler both can implement exceptionCaught(...) method and so we need to dispatch to both of them.
Modifications:
- Correctly first dispatch exceptionCaught to the ChannelInboundHandler but also make sure the next handler it will be dispatched to will be the ChannelOutboundHandler
- Add removeInboundHandler() and removeOutboundHandler() which allows to remove one of the combined handlers
- Let *Codec extends it and not ChannelHandlerAppender
- Remove ChannelHandlerAppender
Result:
Correctly handle events and also have same behavior as in 4.0
Motivation:
Our contract in Channels is that the promise should always be notified before the actual callbacks of the ChannelInboundHandler are called. This was not done in the LocalChannel and so the behavior was different to other Channel implementations.
Modifications:
- First complete the ChannelPromise then call fireChannelActive()
- Guard against NPE when doClose() was called before the task was executed.
Result:
Consistent behavior between LocalChannel and other Channel implementations.
Motivation:
In AbstractChannelTest we not correctly mocked some methods which could lead to test errors. That said it only showed up here when running from the IDE and not from the cmdLine.
Modifications:
Mock methods that are needed for the test
Result:
Test pass in the IDE as well.
Motivation:
At the moment EmbeddedChannel always handle close() and disconnect() the same way which also means that ChannelOutboundHandler.disconnect(...) will never called. We should allow to specify if these are handle different or not to make the use of EmbeddedChannel more flexible.
Modifications:
Add 2 other constructors which allow to specify if disconnect / close are handled the same way or differently.
Result:
More flexible usage of EmbeddedChannel possible.
Motivation:
Boxing/unboxing can be avoided.
Modifications:
Use parseInt/parseLong to avoid unnecessary boxing/unboxing.
Result:
Remove unnecessary boxing/unboxing.
Motivation:
The prefix fix of #2363 did not correctly handle the case when selectAgain is true and so missed to null out entries.
Modifications:
Move the i++ from end of loop to beginning of loop
Result:
Entries in the array will be null out so allow to have these GC'ed once the Channel close
Motivation:
We often used synchronized(this) while the whole method was synchronized, which can be simplified by just mark the whole method as synchronized.
Modifications:
Replace synchronized(this) with synchronized on the method
Result:
Cleaner code
Motivation:
Warnings in IDE, unclean code, negligible performance impact.
Modification:
Deletion of unused imports
Result:
No more warnings in IDE, cleaner code, negligible performance improvement.
Motivation:
Javadoc reports errors about invalid docs.
Modifications:
Fix some errors reported by javadoc.
Result:
A lot of javadoc errors are fixed by this patch.
Motivation:
There are some wrong links and tags in javadoc.
Modifications:
Fix the wrong links and tags in javadoc.
Result:
These links will work correctly in javadoc.
Motivation:
As a user may call deregister() from within any method while doing processing in the ChannelPipeline, we need to ensure we do the actual deregister operation later. This is needed as for example, we may be in the ByteToMessageDecoder.callDecode(...) method and so still try to do processing in the old EventLoop while the user already registered the Channel to a new EventLoop. Without delay, the deregister operation this could lead to have a handler invoked by different EventLoop and so threads.
Modifications:
Ensure the actual deregister will be done later on and not directly when invoked.
Result:
Calling deregister() within ByteToMessageDecoder.decode(..) is safe.
Motivation:
Estimation algorithm currently used for WriteTasks is complicated and
wrong. Additionally, some code relies on outbound buffer size
incremented only on actual writes to the outbound buffer.
Modifications:
- Throw away the old estimator and replace with a simple algorithm that
uses the client-provided estimator along with a statically configured
WriteTask overhead (io.netty.transport.writeTaskSizeOverhead system
property with the default value of 48 bytes)
- Add a io.netty.transport.estimateSizeOnSubmit boolean system property
allowing the clients to disable the message estimation outside the
event loop
Result:
Task estimation is user controllable and produces better results by
default
Motivation:
As discussed in #4529, NameResolver design shouldn't be resolving SocketAddresses (or String name + port) and return InetSocketAddresses. It should resolve String names and return InetAddresses.
This SocketAddress to InetSocketAddresses resolution is actually a different concern, used by Bootstrap.
Modifications:
Extract SocketAddress to InetSocketAddresses resolution concern to a new class hierarchy named AddressResolver.
These AddressResolvers delegate to NameResolvers.
Result:
Better separation of concerns.
Note that new AddressResolvers generate a bit more allocations because of the intermediate Promise and List<InetAddress>.
Motivation:
We need to remove all registered events for a Channel from the EventLoop before doing the actual close to ensure we not produce a cpu spin when the actual close operation is delayed or executed outside of the EventLoop.
Modifications:
Deregister for events for NIO and EPOLL socket implementations when SO_LINGER is used.
Result:
No more cpu spin.
Motivation:
Fix a race-condition when closing NioSocketChannel or EpollSocketChannel while try to detect if a close executor should be used and the underlying socket was already closed. This could lead to an exception that then leave the channel / in an invalid state and so could lead to side-effects like heavy CPU usage.
Modifications:
Catch possible socket exception while try to get the SO_LINGER options from the underlying socket.
Result:
No more race-condition when closing the channel is possible with bad side-effects.
Motivation:
ChannelMetadata has a field minMaxMessagesPerRead which can be confusing. There are also some cases where static instances are used and the default value for channel type is not being applied.
Modifications:
- use a default value which is set unconditionally to simplify
- make sure static instances of MaxMessagesRecvByteBufAllocator are not used if the intention is that the default maxMessagesPerRead should be derived from the channel type.
Result:
Less confusing interfaces in ChannelMetadata and ChannelConfig. Default maxMessagesPerRead is correctly applied.
Motivation:
The CoalescingBufferQueueTest is somewhat relaxed with its releasing of test buffers, using safeRelease to generically deal with tests that may or may not release the buffers. SafeRelease generates logs, however, when the release fails.
Modifications:
Tightened up the individual test methods to verify that the buffers are released properly.
Result:
Fixes#4497
Motivation:
The javadocs for ChannelOption.AUTO_CLOSE say the default is false, but the default is currently true.
Modifications:
- Make javadocs consistent with code
Result:
Less confusing docs.
Motivation:
exceptionCaught(...) will only handle inbound exceptions which means it makes not much sense to have it also on ChannelOutboundHandler. Because of this we should move it to ChannelInboundHandler.
Modifications:
Add @deprecated annotation to ChannelHandler.exceptionCaught(...).
Result:
Preapre to cleanup the API in later release.
Motivation:
We should use OneTimeTask where possible to reduce object creation.
Modifications:
Replace Runnable with OneTimeTask
Result:
Less object creation
Motivation:
We not need to store another reference to AbstractChannel as we can access it through DefaultChannelHandlerContext.
Modifications:
Remove reference.
Result:
Cleaner code.
Motivation:
If you start to have 1M+ concurrent connections memory footprint can be come a big issue. We should try to reduce it as much as possible in the core of netty.
Modifications:
- Remove HashMap that was used to store name to ctx mapping. This was only used for validation and access a handler by name. As a pipeline is not expected to be very long (like 100+ handlers) we can just walk the linked list structure to find the ctx with a given name.
Result:
Less memory footprint of the DefaultChannelPipeline.
Motivation:
The previous DefaultChannelPipeline#destroy() implementation, introduced in #3156, is suboptimal as it can cause the for loop to continuously spin if the executor used by a given handler is unable to "recognize" the event loop.
It could be objected that it's the custom executor responsibility to properly implement the inEventLoop() method, but some implementetaions might not be able to do that for performance reasons, and even so, it's always better to be safe against API misuse, in particular when it is not possible to fail fast and the alternative is rather some sutle behaviour.
Modifications:
The patch simply avoids the recursive spin by explicitly passing the "in event loop" condition as a boolean parameter, preserving the same guarantees offered by #3156. A unit test has also been added.
Result:
All channel events are correctly called and no high CPU usage is seen anymore.
Motivation:
Changing the chache of generated names to use a cache per thread. This will remove the bottleneck when many eventloops are used and names need to generate.
Modifications:
Use a FastThreadLocal to store the cached names.
Result:
Less locking between threads.
Motivation:
We should only call ReferenceCountUtil.touch(...) if needed as otherwise we pay the overhead of instanceof and cast
everytime.
Modifications:
Add boolean flag which indicates if touch(...) should be called.
Result:
Less overhead when leak detection is not enabled.
