Motivation:
`getEntry(...)` may throw an IndexOutOfBoundsException without any error messages.
Modification:
Add detailed error message corresponding to the IndexOutOfBoundsException while calling `getEntry(...)` in HpackDynamicTable.java.
Result:
Easier to debug
Motivation:
When BlockHound is installed,
ReferenceCountedOpenSslClientContext$ExtendedTrustManagerVerifyCallback.verify
is reported as blocking call.
Modifications:
Add allowBlockingCallsInside configuration for
ReferenceCountedOpenSslClientContext$ExtendedTrustManagerVerifyCallback.verify
Result:
Fixes#10384
Motivation:
`HpackDynamicTable` needs some test cases to ensure bug-free.
Modification:
Add unit test for `HpackDynamicTable`.
Result:
Improve test coverage slightly.
Motivation:
BoringSSL behaves differently then OpenSSL and not include any TLS1.3 ciphers in the returned array when calling SSL_get_ciphers(...). This is due the fact that it also not allow to explicit configure which are supported and which not for TLS1.3. To mimic the behaviour expected by the SSLEngine API we should workaround this.
Modifications:
- Add a unit test that verifies enabled protocols / ciphers
- Add special handling for BoringSSL and tls1.3
Result:
Make behaviour consistent
Motivation:
newResourceLeakDetector(...) did not correctly pass the samplingInterval parameter and so it was ignored.
Modification:
ResourceLeakDetectorFactory.newResourceLeakDetector(Class, int) use the second parameter as the sampling interval of the newly created ResourceLeakDetector.
Result:
Fixes#10378
Motivation:
We did not correctly preserve the original cause of the SSLException when all the following are true:
* SSL_read failed
* handshake was finished
* some outbound data was produced durigin SSL_read (for example ssl alert) that needs to be picked up by wrap(...)
Modifications:
Ensure we correctly preserve the original cause of the SSLException and rethrow it once we produced all data via wrap(...)
Result:
Be able to understand why we see an error in all cases
Motivation:
Unsafe users are getting MpscChunkedArrayQueue while no Unsafe ones MpscGrowableAtomicArrayQueue
Modifications:
MpscChunkedAtomicArrayQueue should be used for no Unsafe users (matching MpscChunkedArrayQueue behaviour)
Result:
no Unsafe users uses MpscChunkedAtomicArrayQueue while allocating bounded Mpsc Queues
Motivation:
Due a bug in our test we may dropped data on the floor which are generated during handshaking (or slightly after). This could lead to corrupt state in the engine itself and so fail tests. This is especially true for TLS1.3 which generates the sessions on the server after the "actual handshake" is done.
Modifications:
Contine with wrap / unwrap until all data was consumed
Result:
Correctly feed all data to the engine during testing
Motivation:
When ApplicationProtocolNegotiationHandler is in the pipeline we should expect that its handshakeFailure(...) method will be able to completly handle the handshake error. At the moment this is not the case as it only handled SslHandshakeCompletionEvent but not the exceptionCaught(...) that is also triggered in this case
Modifications:
- Call handshakeFailure(...) in exceptionCaught and so fix double notification.
- Add testcases
Result:
Fixes https://github.com/netty/netty/issues/10342
Motivation:
AbstractDiskHttpData may cause a memory leak when a CompositeByteBuf is used. This happened because we may call copy() but actually never release the newly created ByteBuf.
Modifications:
- Remove copy() call and just use ByteBuf.getBytes(...) which will internally handle the writing to the FileChannel without any extra copies that need to be released later on.
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10354
Motivation:
I did not correctly adjust the code before cherry-pick, causing a compilation error in the test
Modifications:
Use ChannelHandler
Result:
No more compilation error
Motivation
HttpObjectDecoder and its associated classes make frequent use of
default values for maxInitialLineLength, maxHeaderSize, maxChunkSize,
etc. Today, these defaults are defined in-line in constructors and
duplicated across many classes. This repetition is more prone to error
and inconsistencies.
Furthermore, due to the current lack of builder support, if a user wants
to change just one of these values (e.g., maxHeaderSize), they are also
required to know and repeat the other default values (e.g.,
maxInitialLineLength and maxChunkSize).
The primary motivation for this change is as we are considering adding
another constructor parameter (for multiple content length behavior),
appending this parameter may require some users to have prior knowledge
of the default initialBufferSize, and it would be cleaner to allow them
to reference the default constant.
Modifications
* Consolidate the HttpObjectDecoder default values into public constants
* Reference these constants where possible
Result
No functional change. Additional telescoping constructors will be easier
and safer to write. Users may have an easier experience changing single
parameters.
The current FLowControlHandler keeps a flag to track whether a read() call is pending.
This could lead to a scenario where you call read multiple times when the queue is empty,
and when the FlowControlHandler Queue starts getting messages, channelRead will be fired only once,
when we should've fired x many times, once for each time the handlers downstream called read().
Modifications:
Minor change to replace the boolean flag with a counter and adding a unit test for this scenario.
Result:
I used TDD, so I wrote the test, made sure it's failing, then updated the code and re-ran the test
to make sure it's successful after the changes.
Co-authored-by: Kareem Ali <kali@localhost.localdomain>
Motivation:
Current implementation `StompSubframeEncoder` can encode `StompFrame` into several separate chunks or encode separately `StompHeadersSubframe` and `StompContentSubframe`. But some client libraries (e.g. stomp.js) do not support aggregation.
Modification:
Add StompWebSocketFrameEncoder for integration between origin stomp suframe encoder and `ContinuationWebSocketFrame` to support chunks on transport level.
Result:
Fixes#10261
Motivation:
There is a possibility to end up with a StackOverflowError when trying to resolve authorative nameservers because of incorrect wrapping the AuthoritativeDnsServerCache.
Modifications:
Ensure we don't end up with an overflow due wrapping
Result:
Fixes https://github.com/netty/netty/issues/10246
Motivation:
9b7e091 added a special SSLHandshakeException sub-class to signal handshake timeouts but we missed to update a testcase to directly assert the type of the exception.
Modifications:
Assert directly that SslHandshakeTimeoutException is used
Result:
Test cleanup
Motivation:
It seems that `testSwallowedReadComplete(...)` may fail with an AssertionError sometimes after my tests. The relevant stack trace is as follows:
```
java.lang.AssertionError: expected:<IdleStateEvent(READER_IDLE, first)> but was:<null>
at org.junit.Assert.fail(Assert.java:88)
at org.junit.Assert.failNotEquals(Assert.java:834)
at org.junit.Assert.assertEquals(Assert.java:118)
at org.junit.Assert.assertEquals(Assert.java:144)
at io.netty.handler.flow.FlowControlHandlerTest.testSwallowedReadComplete(FlowControlHandlerTest.java:478)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:89)
at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:41)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:542)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:770)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:464)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:210)
```
Obviously the `readerIdleTime` of `IdleStateHandler` and the thread sleep time before `EmbeddedChannel.runPendingTasks` are both 100ms. And if `userEvents.poll()` happened before `userEvents.add(...)` or no `IdleStateEvent` fired at all, this test case would fail.
Modification:
Sleep for a little more time before running all pending tasks in the `EmbeddedChannel`.
Result:
Fix the problem of small probability of failure.
Motivation:
`containsValue()` will check if there are multiple values defined in the specific header name, we need to use this method instead of `contains()` for the `Transfer-Encoding` header to cover the case that multiple values defined, like: `Transfer-Encoding: gzip, chunked`
Modification:
Change from `contains()` to `containsValue()` in `HttpUtil.isTransferEncodingChunked()` method.
Result:
Fixes#10320
Motivation:
Currently we passing custom websocket handshaker response headers to a `WebSocketServerHandshaker` but they can contain a reserved headers (e.g. Connection, Upgrade, Sec-Websocket-Accept) what lead to duplication because we use response.headers().add(..) instead of response.headers().set(..).
Modification:
In each `WebSocketServerHandshaker00`, ... `WebSocketServerHandshaker13` implementation replace the method add(..) to set(..) for reserved response headers.
Result:
Less error-prone
Motivation:
A new GraalVM with JDK 11 was released and GraalVM adds Java 11 support
Modification:
- Update GraalVM JDK 8 version
- Add GraalVM JDK 11 support
Result:
Build with GraalVM JDK 11 and use latest GraalVM JDK 8 version
Motivation:
We should include as much details as possible when throwing an IllegalArgumentException because of overflow in CompositeByteBuf
Modifications:
Add more details and factor out check into a static method to share code
Result:
Make it more clear why an operations failed
Motivation:
SslHandler currently throws a general SSLException if a wrap attempt
fails due to the SSLEngine being closed. If writes are queued the
failure rational typically requires more investigation to track down the
original failure from a previous event. We may have more informative
rational for the failure and so we should use it.
Modifications:
- SslHandler#wrap to use failure information from the handshake or prior
transport closure if available
Result:
More informative exceptions from SslHandler#wrap if the SSLEngine has
been previously closed.
Motivation:
Fix very tiny comment error in Recycler
Modifications:
Fix very tiny comment error in Recycler
Result:
Correctly comment about drop in WeakOrderQueue#add
Motivation:
Once a CNAME loop was detected we can just fail fast and so reduce the number of queries.
Modifications:
Fail fast once a CNAME loop is detected
Result:
Fail fast
Motivation:
The `FlowControlHandler` may cache the received messages in a queue in order to do the flow control. However, if this handler is manually removed from pipeline during runtime, those cached messages might not be passed to the next channel handler forever.
Modification:
Dequeue all these cached messages and call `ChannelHandlerContext.fireChannelRead(...)` in `handlerRemoved(...)` method.
Result:
Avoid losing the received messages.
Motivation:
We did use a HashSet to detect CNAME cache loops which needs allocations. We can use an algorithm that doesnt need any allocations
Modifications:
Use algorithm that doesnt need allocations
Result:
Less allocations on the slow path
Motivation:
`SslHandlerTest.testSessionTicketsWithTLSv12AndNoKey` does not require
BoringSSL and works with OpenSSL as well.
Modifications:
- Remove assume statement that expected BoringSSL;
Result:
Test works for any implementation of `OPENSSL` provider.
Motivation:
To ensure we not crash in all cases we should better check that the SSL pointer was not freed before using it.
Modifications:
Add missing `isDestroyed()` checks
Result:
Ensure we not crash due usage of freed pointer.
Motivation:
The linux-aarch64 packages are not declared in netty-bom. There are no consistency checks for netty bom, hence it can easily miss updates when artifacts are added.
Modifications:
- Add declarations.
- Modify netty-all to depend on netty-bom for version declarations,
thus requiring netty-bom to be uptodate.
Result:
Be able to reference aarch64 packages without an explicit version. The content of netty-all is guaranteed to be declared in netty-bom, adding a safety net.
Signed-off-by: Robert Varga <robert.varga@pantheon.tech>
Motivation:
make the existing setter `ReferenceCountedOpenSslContext.setUseTasks` public
Modification:
Added the `public` qualified and removed the comment "for tests only"
Result:
Fixes#10288
Motivation:
We should respect jdk.tls.client.enableSessionTicketExtension and jdk.tls.server.enableSessionTicketExtension when using the native SSL implementation as well to make the usage of it easier and more consistent. These properties were introduced by JDK13:
https://seanjmullan.org/blog/2019/08/05/jdk13
Modifications:
Check if the properties are set to true and if so enable tickets
Result:
Easier to enable tickets and be more consistent
Motivation:
AbstractCoalescingBufferQueue had a bug which could lead to an empty queue while still report bytes left. This was due the fact that we decremented the pending bytes before draining the queue one-by-one. The problem here is that while the queue is drained we may notify the promise which may add again buffers to the queue for which we never decrement the bytes while we drain these
Modifications:
- Decrement the pending bytes every time we drain a buffer from the queue
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/10286
Motivation:
There exists no DNS client examples in run-example.sh for the moment.
Modification:
Add DNS client examples for run-example.sh.
Result:
Help run the examples.
Motivation:
BoringSSL supports to automatically manage the session tickets to be used and so also rotate them etc. This is often prefered by users as it removed some complexity. We should support to make use of this.
Modifications:
- Allow to have setSessionTickets() called without an argument or an empty array
- Add tests
Result:
Easier usage of session tickets
Motivation:
`FileChannel.read()` may throw an IOException. We must deal with this in case of the occurrence of `I/O` error.
Modification:
Place the `FileChannel.read()` method call in the `try-finally` block.
Result:
Advoid fd leak.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
The defined classifier for aarch64 was not correct
Modifications:
Fix classifier
Result:
Be able to correctly include the aarch64 native libs
Motivation:
`transport-native-epoll` doesn't have ARM release package.
Modification:
This PR added cross compile profile for epoll. Then we can easily build aarch64 package on X86 machine.
Result:
Fixes#8279
Motivations
-----------
HttpPostStandardRequestDecoder was changed in 4.1.50 to provide its own
ByteBuf UrlDecoder. Prior to this change, it was using the decodeComponent
method from QueryStringDecoder which decoded + characters to
whitespaces. This behavior needs to be preserved to maintain backward
compatibility.
Modifications
-------------
Changed HttpPostStandardRequestDecoder to detect + bytes and decode them
toe whitespaces. Added a test.
Results
-------
Addresses issues#10284
Motivation:
OpenSslSession.getLocalCertificates() and getLocalPrincipal() must return null on client side if mTLS is not used as stated in the API documentation. At the moment this is not always the case
Modifications:
- Ensure we only return non-null if mTLS is used
- Add unit tests
Result:
Follow SSLSession API contract
Motivation:
The nameserver that should / must be used to resolve a CNAME may be different then the nameserver that was selected for the hostname to resolve. Failing to select the correct nameserver may result in problems during resolution.
Modifications:
Use the correct DnsServerAddressStream for CNAMEs
Result:
Always use the correct DnsServerAddressStream for CNAMEs and so fix resolution failures which could accour when CNAMEs are in the mix that use a different domain then the original hostname that we try to resolve
Motivation:
After searching the whole netty project, I found that the private method `translateHeader(...)` with empty body is never used actually. So I think it could be safely removed.
Modification:
Just remove this unused method.
Result:
Clean up the code.
Motivation:
`io.netty.handler.codec.http2.Http2Stream.State` is never used in DefaultHttp2LocalFlowController.java, and `io.netty.handler.codec.http2.HpackUtil.equalsConstantTime` is never used in HpackStaticTable.java.
Modification:
Just remove these unused imports.
Result:
Make imports cleaner.
Motivation:
`Date`, `Expires`, and `Set-Cookie` headers are being generated with a 1-digit day of month,
e.g. `Sun, 6 Nov 1994 08:49:37 GMT`. RFC 2616 specifies that `Date` and `Expires` headers should
use "a fixed-length subset of that defined by RFC 1123" which includes a 2-digit day of month.
RFC6265 is lax in it's specification of the `Set-Cookie` header and permits a 2-digit day of month.
See: https://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html
See: https://tools.ietf.org/html/rfc1123#page-55
See: https://tools.ietf.org/html/rfc6265#section-5.1.1
Modifications:
- Update `DateFormatter` to correctly implement RFC 2616 headers
Result:
```
Date: Sun, 06 Nov 1994 08:49:37 GMT
Expires: Sun, 06 Nov 1994 08:49:37 GMT
Set-Cookie: id=a3fWa; Expires=Sun, 06 Nov 1994 08:49:37 GMT
```
Motivation:
[DNS-over-TLS (DoT)](https://tools.ietf.org/html/rfc7858.html) encrypts DNS queries and sends it over TLS connection to make sure queries are secure in transit.
[TCP DNS](https://tools.ietf.org/html/rfc7766) sends DNS queries over TCP connection (unencrypted).
Modification:
Add DNS-over-TLS (DoT) Client Example which uses TLSv1.2 and TLSv1.3.
Add TCP DNS Client Example
Result:
DNS-over-TLS (DoT) Client Example
TCP DNS Client Example
