Commit Graph

1090 Commits

Author SHA1 Message Date
Scott Mitchell
bf7f41a993 SslHandler to fail handshake and pending writes if non-application write fails (#9240)
Motivation:
SslHandler must generate control data as part of the TLS protocol, for example
to do handshakes. SslHandler doesn't capture the status of the future
corresponding to the writes when writing this control (aka non-application
data). If there is another handler before the SslHandler that wants to fail
these writes the SslHandler will not detect the failure and we must wait until
the handshake timeout to detect a failure.

Modifications:
- SslHandler should detect if non application writes fail, tear down the
channel, and clean up any pending state.

Result:
SslHandler detects non application write failures and cleans up immediately.
2019-06-16 07:45:25 +02:00
Norman Maurer
9c51a8c6d4 Correctly detect that KeyManagerFactory is not supported when using OpenSSL 1.1.0+ (#9170)
Motivation:

How we tried to detect if KeyManagerFactory is supported was not good enough for OpenSSL 1.1.0+ as it partly provided the API but not all of what is required.

This then lead to failures like:

[ERROR] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 1.102 s <<< FAILURE! - in io.netty.channel.epoll.EpollDomainSocketStartTlsTest
[ERROR] initializationError(io.netty.channel.epoll.EpollDomainSocketStartTlsTest)  Time elapsed: 0.016 s  <<< ERROR!
javax.net.ssl.SSLException: failed to set certificate and key
	at io.netty.handler.ssl.ReferenceCountedOpenSslServerContext.newSessionContext(ReferenceCountedOpenSslServerContext.java:130)
	at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:353)
	at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:334)
	at io.netty.handler.ssl.SslContext.newServerContextInternal(SslContext.java:468)
	at io.netty.handler.ssl.SslContextBuilder.build(SslContextBuilder.java:457)
	at io.netty.testsuite.transport.socket.SocketStartTlsTest.data(SocketStartTlsTest.java:93)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.runners.Parameterized.allParameters(Parameterized.java:280)
	at org.junit.runners.Parameterized.<init>(Parameterized.java:248)
	at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
	at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
	at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
	at java.lang.reflect.Constructor.newInstance(Constructor.java:423)
	at org.junit.internal.builders.AnnotatedBuilder.buildRunner(AnnotatedBuilder.java:104)
	at org.junit.internal.builders.AnnotatedBuilder.runnerForClass(AnnotatedBuilder.java:86)
	at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:59)
	at org.junit.internal.builders.AllDefaultPossibilitiesBuilder.runnerForClass(AllDefaultPossibilitiesBuilder.java:26)
	at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:59)
	at org.junit.internal.requests.ClassRequest.getRunner(ClassRequest.java:33)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:362)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeWithRerun(JUnit4Provider.java:273)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:238)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:159)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:384)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:345)
	at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:126)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:418)
Caused by: java.lang.Exception: Requires OpenSSL 1.0.2+
	at io.netty.internal.tcnative.SSLContext.setCertificateCallback(Native Method)
	at io.netty.handler.ssl.ReferenceCountedOpenSslServerContext.newSessionContext(ReferenceCountedOpenSslServerContext.java:126)
	... 32 more

Modifications:

Also try to set the certification callback and only if this works as well mark KeyManagerFactory support as enabled.

Result:

Also correctly work when OpenSSL 1.1.0 is used.
2019-05-22 19:08:40 +02:00
Norman Maurer
bbb397ac5c Remove usage of io.netty.handler.ssl.openssl.useKeyManagerFactory system property
Motivation:

Usafe of io.netty.handler.ssl.openssl.useKeyManagerFactory system property was deprecated in 4.1 so let us remove it.

Modifications:

Remove io.netty.handler.ssl.openssl.useKeyManagerFactory usage.

Result:

Remove support of deprecated system property
2019-05-22 09:09:32 +02:00
Norman Maurer
ed61e5f543 Only use static Exception instances when we can ensure addSuppressed … (#9152)
Motivation:

OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.

Modifications:

Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.

Result:

Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
2019-05-17 22:42:53 +02:00
Norman Maurer
260a8a0e9e Add missing assume checks to skip tests if KeyManagerFactory can not be used (#9148)
Motivation:

Depending on what OpenSSL library version we use / system property that is set we need to skip tests that use KeyManagerFactory.

Modifications:

Add missing assume checks for tests that use KeyManagerFactory.

Result:

All tests pass even if KeyManagerFactory is not supported
2019-05-15 07:25:03 +02:00
RoganDawes
0a1786c32c Remove the Handler only after it has initialized the channel (#9132)
Motivation:

Previously, any 'relative' pipeline operations, such as
ctx.pipeline().replace(), .addBefore(), addAfter(), etc
would fail as the handler was not present in the pipeline.

Modification:

Used the pattern from ChannelInitializer when invoking configurePipeline().

Result:

Fixes #9131
2019-05-13 13:55:17 +02:00
SplotyCode
d3a13a0d6a Allow to specify KeyStore type in SslContext (#9003)
Motivation:

As brought up in https://github.com/netty/netty/issues/8998, JKS can be substantially faster than pkcs12, JDK's new default. Without an option to set the KeyStore type you must change the configuration of the entire JVM which is impractical.

Modification:

- Allow to specify KeyStore type
- Add test case

Result:

Fixes https://github.com/netty/netty/issues/8998.
2019-05-10 07:51:20 +02:00
Norman Maurer
c06ca367ca Introduce DynamicAddressConnectHandler which can be used to dynamically change remoteAddress / localAddress when a connect is issued (#8982)
Motivation:

Bootstrap allows you to set a localAddress for outbound TCP connections, either via the Bootstrap.localAddress(localAddress) or Bootstrap.connect(remoteAddress, localAddress) methods. This works well if you want to bind to just one IP address on an interface. Sometimes you want to bind to a specific address based on the resolved remote address which should be possible.

Modifications:

Add DynamicAddressConnectHandler and tests

Result:

Fixes https://github.com/netty/netty/issues/8940.
2019-04-30 07:59:40 +02:00
Ilya Maykov
1cd9f5e17b [openssl] fix refcount bug in OpenSslPrivateKeyMaterial ctor
Motivation:

Subclasses of `OpenSslKeyMaterial` implement `ReferenceCounted`. This means that a new object should have an initial refcount of 1. An `OpenSslPrivateKey.OpenSslPrivateKeyMaterial` object shares its refcount with the enclosing `OpenSslPrivateKey` object. This means the enclosing object's refcount must be incremented by 1 when an instance of `OpenSslPrivateKey.OpenSslPrivateKeyMaterial` is created. Otherwise, when the key material object is `release()`-ed, the refcount on the enclosing object will drop to 0 while it is still in use.

Modification:

- Increment the refcount in the constructor of `OpenSslPrivateKey.OpenSslPrivateKeyMaterial`
- Ensure we also always release the native certificates as well.

Result:

Refcount is now correct.
2019-04-29 23:11:53 +02:00
Norman Maurer
795fa8aef1 Throw SignatureException if OpenSslPrivateKeyMethod.* return null to prevent segfault (#9100)
Motivation:

While OpenSslPrivateKeyMethod.* should never return null we should still guard against it to prevent any possible segfault.

Modifications:

- Throw SignatureException if null is returned
- Add unit test

Result:

No segfault when user returns null.
2019-04-29 08:31:56 +02:00
Norman Maurer
ee207f4bc6 Make validation tools more happy by not have TrustManager impl just accept (#9041)
Motivation:

Seems like some analyzer / validation tools scan code to detect if it may produce some security risk because of just blindly accept certificates. Such a tool did tag our code because we have such an implementation (which then is actually never be used). We should just change the impl to not do this as it does not matter for us and it makes such tools happier.

Modifications:

Throw CertificateException

Result:

Fixes https://github.com/netty/netty/issues/9032
2019-04-12 21:37:31 +02:00
Norman Maurer
7c35781f4d
DefaultPromise may throw checked exceptions that are not advertised (#8995)
Motivation:

We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.

Modifications:

- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests

Result:

Fixes https://github.com/netty/netty/issues/8521.
2019-04-10 07:15:31 +02:00
秦世成
fdb4b0e7af Avoid IdleStateHandler triggering unexpected idle events when flushing large entries to slow clients (#9020)
Motivation:

IdleStateHandler may trigger unexpected idle events when flushing large entries to slow clients.

Modification:

In netty design, we check the identity hash code and total pending write bytes of the current flush entry to determine whether there is a change in output. But if a large entry has been flushing slowly (for some reason, the network speed is slow, or the client processing speed is too slow to cause the TCP sliding window to be zero), the total pending write bytes size and identity hash code would remain unchanged.

Avoid this issue by adding checks for the current entry flush progress.

Result:

Fixes #8912 .
2019-04-09 16:27:09 +02:00
Norman Maurer
4eeaa4f956 Fix NPE in OpenSslPrivateKeyMethodTest.destroy() when BoringSSL is not used
Motivation:

4079189f6b introduced OpenSslPrivateKeyMethodTest which will only be run when BoringSSL is used. As the assumeTrue(...) also guards the init of the static fields we need to ensure we only try to destroy these if BoringSSL is used as otherwise it will produce a NPE.

Modifications:

Check if BoringSSL is used before trying to destroy the resources.

Result:

No more NPE when BoringSSL is not used.
2019-04-09 08:33:42 +02:00
Norman Maurer
a9cca146d7 Allow to offload / customize key signing operations when using BoringSSL. (#8943)
Motivation:

BoringSSL allows to customize the way how key signing is done an even offload it from the IO thread. We should provide a way to plugin an own implementation when BoringSSL is used.

Modifications:

- Introduce OpenSslPrivateKeyMethod that can be used by the user to implement custom signing by using ReferenceCountedOpenSslContext.setPrivateKeyMethod(...)
- Introduce static methods to OpenSslKeyManagerFactory which allows to create a KeyManagerFactory which supports to do keyless operations by let the use handle everything in OpenSslPrivateKeyMethod.
- Add testcase which verifies that everything works as expected

Result:

A user is able to customize the way how keys are signed.
2019-04-08 20:25:37 +02:00
Farid Zakaria
2935944426 Increase default bits for SelfSignedCertificate (#9019)
Motivation:
During OpenSsl.java initialization, a SelfSignedCertificate is created
during the static initialization block to determine if OpenSsl
can be used.

The default key strength for SelfSignedCertificate was too low if FIPS
mode is used and BouncyCastle-FIPS is the only available provider
(necessary for compliance). A simple fix is to just augment the key
strength to the minimum required about by FIPS.

Modification:
Set default key bit length to 2048 but also allow it to be dynamically set via a system property for future proofing to more stricter security compliance.

Result:
Fixes #9018

Signed-off-by: Farid Zakaria <farid.m.zakaria@gmail.com>
2019-04-08 20:09:32 +02:00
Norman Maurer
6c4485f53c We should fail fast if the given PrivateKey or X509Certificate chain is not supported by the used SslProvider. (#9009)
Motivation:

Some SslProvider do support different types of keys and chains. We should fail fast if we can not support the type.

Related to https://github.com/netty/netty-tcnative/issues/455.

Modifications:

- Try to parse key / chain first and if if this fails throw and SslException
- Add tests.

Result:

Fail fast.
2019-04-08 15:24:41 +02:00
Norman Maurer
c4c3acf6fb Always include initial handshake exception when throwing SslHandshakeException (#9008)
Motivation:

A callback may already have stored a initial handshake exception in ReferenceCountedOpenSslEngine so we should include it when throwing a SslHandshakeException to ensure the user has all the infos when debugging.

Modifications:

Include initial handshake exception

Result:

Include all erros when throwing the SslHandshakeException.
2019-04-05 09:55:56 +02:00
Norman Maurer
bace8a1cce
Remove code that accounts for changing EventExecutors in DefaultPromise (#8996)
Motivation:

DefaultPromise requires an EventExecutor which provides the thread to notify listeners on and this EventExecutor can never change. We can remove the code that supported the possibility of a changing the executor as this is not possible anymore.

Modifications:

- Remove constructor which allowed to construct a *Promise without an EventExecutor
- Remove extra state
- Adjusted SslHandler and ProxyHandler for new code

Result:

Fixes https://github.com/netty/netty/issues/8517.
2019-04-03 10:36:55 +02:00
Norman Maurer
6b8a0ed374 Remove call to SSL.setHostNameValidation(...) as it is done in the TrustManager (#8981)
Motivation:

We do not need to call SSL.setHostNameValidation(...) as it should be done as part of the TrustManager implementation. This is consistent with the JDK implementation of SSLEngine.

Modifications:

Remove call to SSL.setHostNameValidation(...)

Result:

More consistent behaviour between our SSLEngine implementation and the one that comes with the JDK.
2019-04-01 21:03:20 +02:00
Norman Maurer
07244a194f Use SSL.setKeyMaterial(...) to test if the KeyManagerFactory is supported (#8985)
Motivation:

We use SSL.setKeyMaterial(...) in our implementation when using the KeyManagerFactory so we should also use it to detect if we can support KeyManagerFactory.

Modifications:

Use SSL.setKeyMaterial(...) as replacement for SSL.setCertificateBio(...)

Result:

Use the same method call to detect if KeyManagerFactory can be supported as we use in the real implementation.
2019-04-01 12:03:31 +02:00
Norman Maurer
0f34345347
Merge ChannelInboundHandler and ChannelOutboundHandler into ChannelHa… (#8957)
Motivation:

In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.

Modifications:

- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.

Result:

Cleaner and simpler code in terms of class-hierarchy.
2019-03-28 09:28:27 +00:00
Norman Maurer
231eb145f1 Consolidate creation of SslHandshakeException when caused by a callback that is used in the native SSL implementation. (#8979)
Motivation:

We have multiple places where we store the exception that was produced by a callback in ReferenceCountedOpenSslEngine, and so have a lot of code-duplication.

Modifications:

- Consolidate code into a package-private method that is called from the callbacks if needed

Result:

Less code-duplication and cleaner code.
2019-03-26 11:39:09 +01:00
Norman Maurer
1736b0e6a8 Allow to offload certificate validation when using BoringSSL (#8974)
Motivation:

BoringSSL supports offloading certificate validation to a different thread. This is useful as it may need to do blocking operations and so may block the EventLoop.

Modification:

- Adjust ReferenceCountedOpenSslEngine to correctly handle offloaded certificate validation (just as we already have code for certificate selection).

Result:

Be able to offload certificate validation when using BoringSSL.
2019-03-24 20:04:18 +01:00
Norman Maurer
a817e30d41 Add SSLEngineTest to ensure Signature Algorithms are present during KeyManager calls. (#8965)
Motivation:

We had a bug which could case ExtendedSSLSession.getPeerSupportedSignatureAlgorithms() return an empty array when using BoringSSL. This testcase verifies we correctly return algorithms after the fix in https://github.com/netty/netty-tcnative/pull/449.

Modifications:

Add testcase to verify behaviour.

Result:

Ensure we correctly retuen the algorithms.
2019-03-24 07:40:49 +01:00
Norman Maurer
d3535d31be Correctly detect exeception cause when using BoringSSL in SslErrorTest
Motivation:

e9ce5048df added a testcase to ensure we correctly send the alert in all cases but did use a too strict message matching which did not work for BoringSSL as it not uses whitespaces but underscores.

Modifications:

Make the message matching less strict.

Result:

Test pass also when using BoringSSL.
2019-03-22 16:31:35 +01:00
Norman Maurer
21cb040aef Correctly produce ssl alert when certificate validation fails on the client-side when using native SSL implementation. (#8949)
Motivation:

When the verification of the server cert fails because of the used TrustManager on the client-side we need to ensure we produce the correct alert and send it to the remote peer before closing the connection.

Modifications:

- Use the correct verification mode on the client-side by default.
- Update tests

Result:

Fixes https://github.com/netty/netty/issues/8942.
2019-03-18 18:51:35 +01:00
Norman Maurer
42742e233f
Deprecate ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter (#8929)
Motivation:

As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.

Modifications:

- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore

Result:

Cleanup class-hierarchy and make things a bit more flexible.
2019-03-13 09:46:10 +01:00
Norman Maurer
7e76d02fe7 ReferenceCountedOpenSslEngines SSLSession must provide local certific… (#8918)
Motivation:

The SSLSession that is returned by SSLEngine.getHandshakeSession() must be able to provide the local certificates when the TrustManager is invoked on the server-side.

Modifications:

- Correctly return the local certificates
- Add unit test

Result:

Be able to obtain local certificates from handshake SSLSession during verification on the server side.
2019-03-08 06:54:45 +01:00
Norman Maurer
22128a85fe Add interopt tests between Conscrypt and OpenSSL SSLEngine implementations. (#8919)
Motivation:

In the past we found a lot of SSL related bugs because of the interopt tests we have in place between different SSLEngine implementations. We should have as many of these interopt tests as possible for this reason.

Modifications:

- Add interopt tests between Conscrypt and OpenSSL SSLEngine implementations

Result:

More tests for SSL.
2019-03-07 09:37:21 +01:00
Norman Maurer
b2dc54c8c6 Support delegating task when using ReferenceCountedOpenSslEngine. (#8859)
Motivation:

SSLEngine API has a notion of tasks that may be expensive and offload these to another thread. We did not support this when using our native implementation but can now for various operations during the handshake.

Modifications:

- Support offloading tasks during the handshake when using our native SSLEngine implementation
- Correctly handle the case when NEED_TASK is returned and nothing was consumed / produced yet

Result:

Be able to offload long running tasks from the EventLoop when using SslHandler with our native SSLEngine.
2019-03-05 09:38:03 +01:00
Norman Maurer
71d8d057e6 Only remove ReferenceCountedOpenSslEngine from OpenSslEngineMap when engine is destroyed (#8905)
Motivation:

We must only remove ReferenceCountedOpenSslEngine from OpenSslEngineMap when engine is destroyed as the verifier / certificate callback may be called multiple times when the remote peer did initiate a renegotiation.
If we fail to do so we will cause an NPE like this:

```
13:16:36.750 [testsuite-oio-worker-5-18] DEBUG i.n.h.s.ReferenceCountedOpenSslServerContext - Failed to set the server-side key material
java.lang.NullPointerException: null
	at io.netty.handler.ssl.OpenSslKeyMaterialManager.setKeyMaterialServerSide(OpenSslKeyMaterialManager.java:69)
	at io.netty.handler.ssl.ReferenceCountedOpenSslServerContext$OpenSslServerCertificateCallback.handle(ReferenceCountedOpenSslServerContext.java:212)
	at io.netty.internal.tcnative.SSL.readFromSSL(Native Method)
	at io.netty.handler.ssl.ReferenceCountedOpenSslEngine.readPlaintextData(ReferenceCountedOpenSslEngine.java:575)
	at io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap(ReferenceCountedOpenSslEngine.java:1124)
	at io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap(ReferenceCountedOpenSslEngine.java:1236)
	at io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap(ReferenceCountedOpenSslEngine.java:1279)
	at io.netty.handler.ssl.SslHandler$SslEngineType$1.unwrap(SslHandler.java:217)
	at io.netty.handler.ssl.SslHandler.unwrap(SslHandler.java:1330)
	at io.netty.handler.ssl.SslHandler.decodeNonJdkCompatible(SslHandler.java:1237)
	at io.netty.handler.ssl.SslHandler.decode(SslHandler.java:1274)
	at io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(ByteToMessageDecoder.java:502)
	at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:441)
	at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:278)
	at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:359)
	at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:345)
	at io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(AbstractChannelHandlerContext.java:337)
	at io.netty.channel.DefaultChannelPipeline$HeadContext.channelRead(DefaultChannelPipeline.java:1408)
	at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:359)
	at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:345)
	at io.netty.channel.DefaultChannelPipeline.fireChannelRead(DefaultChannelPipeline.java:930)
	at io.netty.channel.oio.AbstractOioByteChannel.doRead(AbstractOioByteChannel.java:170)
	at io.netty.channel.oio.AbstractOioChannel$1.run(AbstractOioChannel.java:40)
	at io.netty.channel.ThreadPerChannelEventLoop.run(ThreadPerChannelEventLoop.java:69)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:905)
	at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30)
	at java.base/java.lang.Thread.run(Thread.java:834)
```

While the exception is kind of harmless (as we will reject the renegotiation at the end anyway) it produces some noise in the logs.

Modifications:

Don't remove engine from map after handshake is complete but wait for it to be removed until the engine is destroyed.

Result:

No more NPE and less noise in the logs.
2019-03-01 19:31:30 +01:00
Konstantin Lutovich
94ffd28973 Close consumed inputs in ChunkedWriteHandler (#8876)
Motivation:

ChunkedWriteHandler needs to close both successful and failed
ChunkInputs. It used to never close successful ones.

Modifications:

* ChunkedWriteHandler always closes ChunkInput before completing
the write promise.
* Ensure only ChunkInput#close() is invoked
on a failed input.
* Ensure no methods are invoked on a closed input.

Result:

Fixes https://github.com/netty/netty/issues/8875.
2019-02-28 21:18:43 +01:00
Norman Maurer
89139aa3f8 Correctly resume wrap / unwrap when SslTask execution completes (#8899)
Motivation:

fa6a8cb09c introduced correct dispatching of delegated tasks for SSLEngine but did not correctly handle some cases for resuming wrap / unwrap after the task was executed. This could lead to stales, which showed up during tests when running with Java11 and BoringSSL.

Modifications:

- Correctly resume wrap / unwrap in all cases.
- Fix timeout value which was changed in previous commit by mistake.

Result:

No more stales after task execution.
2019-02-28 20:30:04 +01:00
Norman Maurer
0d37b06bc8 Update JDK12 and 13 to latest EA releases. (#8809)
Motivation:

We use outdated EA releases when building and testing with JDK 12 and 13.

Modifications:

- Update versions.
- Add workaround for possible JDK12+ bug.

Result:

Use latest releases
2019-02-28 13:55:01 +01:00
Norman Maurer
b9d277dbcb Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 10:00:55 +01:00
Stephane Landelle
ee4e46e6e2 Drop SPDY support (#8845)
Motivation:

SPDY has been superseded by HTTP/2. Chrome has dropped support in 2016 and GFE no longer negociate it.

Modifications:

* drop codec
* drop examples
* drop constants from `ApplicationProtocolNames`

Result:

SPDY support dropped from Netty 5
2019-02-07 09:25:31 +01:00
田欧
e8efcd82a8 migrate java8: use requireNonNull (#8840)
Motivation:

We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)

Modifications:

- Use Objects.requireNonNull(...)

Result:

Less code to maintain.
2019-02-04 10:32:25 +01:00
田欧
6222101924 migrate java8: use lambda and method reference (#8781)
Motivation:

We can use lambdas now as we use Java8.

Modification:

use lambda function for all package, #8751 only migrate transport package.

Result:

Code cleanup.
2019-01-29 14:06:05 +01:00
田欧
e941cbe27a remove unused import statement (#8792)
Motivation:
The code contained some unused import statements.

Modification:
Remove unused import statements.

Result:
Code cleanup
2019-01-28 16:50:15 +01:00
Stephane Landelle
e1c94363eb Remove deprecated SslContext constructors (#8785)
Motivation:

SslContext implementations have tons of contructors, most of them deprecated as we want to enforce builder usage in Netty 5.

Cleaning them up is a requirement prior to introducing new parameters such as hostname verification.

Modifications:

* Make SslContext implementations classes and constructors package private, users are supposed to use the SslContextBuilder.
* Drop all but one constructor. The exception for now is with Jdk(Client|Server)Context that still has an additional constructor that takes an ApplicationProtocolNegotiator parameter. ApplicationProtocolNegotiator usage is supposed to be dropped in favor of ApplicationProtocolConfig and this constructor is only used in tests, so I guess it will be dropped to in a follow up.

Result:

Deprecated code dropped. Path cleaned up for introducing new features with having to introduce yet another constructor.
2019-01-28 06:01:53 +01:00
田欧
934a07fbe2 migrate java8 (#8779)
Motivation:

We can omit argument types when using Java8.

Modification:

Omit arguments where possible.

Result:

Cleaner code.
2019-01-28 05:55:30 +01:00
kezhenxu94
7b6336f1fd Java 8 Migration: remove uneccessary if statement (#8755)
Motivation:

As netty 4.x supported Java 6 we had various if statements to check for java versions < 8. We can remove these now.

Modification:

Remove unnecessary if statements that check for java versions < 8.

Result:

Cleanup code.
2019-01-25 08:57:11 +01:00
Norman Maurer
310f31b392
Update to new checkstyle plugin (#8777)
Motivation:

We need to update to a new checkstyle plugin to allow the usage of lambdas.

Modifications:

- Update to new plugin version.
- Fix checkstyle problems.

Result:

Be able to use checkstyle plugin which supports new Java syntax.
2019-01-24 16:24:19 +01:00
Dmitriy Dumanskiy
4a10357fd8 IDE warnings cleanup (#8768)
Motivation:

IDE shows some warnings

Modification:

Small IDE warnings cleanup in different places.

Result:

Less warnings
2019-01-23 14:01:48 +01:00
Norman Maurer
3d6e6136a9
Decouple EventLoop details from the IO handling for each transport to… (#8680)
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization

Motiviation:

As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.

Modifications:

This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.

Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:

  * Adding instrumentation / metrics:
    * how many Channels are registered on an SingleThreadEventLoop
    * how many Channels were handled during the IO processing in an EventLoop run
    * how many task were handled during the last EventLoop / EventExecutor run
    * how many outstanding tasks we have
    ...
    ...
  * Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
  * Use different Promise / Future / ScheduledFuture implementations
  * decorate Runnable / Callables when submitted to the EventExecutor / EventLoop

As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:

  * AbstractEventLoop
  * AbstractEventLoopGroup
  * EventExecutorChooser
  * EventExecutorChooserFactory
  * DefaultEventLoopGroup
  * DefaultEventExecutor
  * DefaultEventExecutorGroup

Result:

Fixes https://github.com/netty/netty/issues/8514 .
2019-01-23 08:32:05 +01:00
Dmitriy Dumanskiy
7b92ff2500 Java 8 migration. Remove ThreadLocalProvider and inline java.util.concurrent.ThreadLocalRandom.current() where necessary. (#8762)
Motivation:

Custom Netty ThreadLocalRandom and ThreadLocalRandomProvider classes are no longer needed and can be removed.

Modification:

Remove own ThreadLocalRandom

Result:

Less code to maintain
2019-01-22 20:14:28 +01:00
Dmitriy Dumanskiy
32d96a7f79 Java 8 migration. Similar catch blocks joined (#8759)
Motivation:

Avoid IDE warnings, easier to read.

Modification:

Same catch blocks joined.

Result:

Cleanup
2019-01-22 18:00:10 +01:00
Dmitriy Dumanskiy
42376c052a Java 8 migration. Inline PlatformDependent.newConcurrentHashMap() (#8760)
Motivation:

PlatformDependent.newConcurrentHashMap() is no longer needed so it could be easily removed and new ConcurrentHashMap<>() inlined instead of invoking PlatformDependent.newConcurrentHashMap().

Modification:

Use ConcurrentHashMap provided by the JDK directly.

Result:

Less code to maintain.
2019-01-22 17:18:50 +01:00
田欧
9d62deeb6f Java 8 migration: Use diamond operator (#8749)
Motivation:

We can use the diamond operator these days.

Modification:

Use diamond operator whenever possible.

Result:

More modern code and less boiler-plate.
2019-01-22 16:07:26 +01:00