Motivation:
Netty is unable to use Java9s ALPN support atm.
Modifications:
When running on Java9+ we invoke the correct methods that are exposed on the Java9+ implementation of SSLEngine and so be able to support ALPN.
This patch is based on the work of @rschmitt and so https://github.com/netty/netty/pull/6992.
Result:
Fixes#6933.
Motivation:
netty-tcnative recently change the name of the native libraries from using - to _.
Modifications:
- OpenSsl should use _ instead of - even for the classifiers to be consistent with netty-tcnative
Result:
Loading netty-tcnative works.
Motivation:
We should deprecate ApplicationProtocolNegotiator as the users should use ApplicationProtocolConfig these days.
Modifications:
Add deprecation annotations and javadocs.
Result:
Be able to make package-private in next major release.
Motivation:
When SslHandlerTest#testCompositeBufSizeEstimationGuaranteesSynchronousWrite fails it would be useful to know the SslProvider type
Modifications:
- Print the sever and client SslProvider upon failure
- Increase test timeout to 8 minutes to allow more time to run
Result:
Failures include more info to help diagnose issues.
Motivation:
DelegatingSslContext at the moment intercept newEngine calls and allow to init the SslEngine after it is created. The problem here is that this may not work the SSLEngine that is wrapped in the SslHandler when calling newHandler(...). This is because some SslContext implementations not delegate to newEngine(...) when creating the SslHandler to allow some optimizations. For this we should also allow to init the SslHandler after its creation and by default just delegate to initEngine(...).
Modifications:
Allow the user to also init the SslHandler after creation while by default init its SSLEngine after creation.
Result:
More flexible and correct code.
This reverts commit d63bb4811e as this not covered correctly all cases and so could lead to missing fireChannelReadComplete() calls. We will re-evalute d63bb4811e and resbumit a pr once we are sure all is handled correctly
Motivation:
We recently changed netty-tcnative to use underscores in its native library names.
Modifications:
Update code to use underscores when loading native library.
Result:
More consistent code.
Motivation:
SslHandlerTest#testCompositeBufSizeEstimationGuaranteesSynchronousWrite has been observed to fail on CI servers, but it is not clear why.
Modifications:
- Add more visibility into what the state was and what the condition that caused the failure was.
Result:
More visibility when the test fails.
Motivation:
Commit 4448b8f42f introduced some API breakage which we need to revert before we release.
Modifications:
- Introduce an AllocatorAwareSslEngineWrapperFactory which expose an extra method that takes a ByteBufAllocator as well.
- Revert API changes to SslEngineWrapperFactory.
Result:
API breakage reverted.
Motivation:
Its wasteful and also confusing that channelReadComplete() is called even if there was no message forwarded to the next handler.
Modifications:
- Only call ctx.fireChannelReadComplete() if at least one message was decoded
- Add unit test
Result:
Less confusing behavior. Fixes [#4312].
Motivation:
We need to ensure we not try to load any conscrypt classes directly (which means without using reflection) in the same class that is used to check if conscrypt is available. This is needed as otherwise we will have the following problem when try to use netty on java7:
java.lang.UnsupportedClassVersionError: org/conscrypt/BufferAllocator : Unsupported major.minor version 52.0
at io.netty.handler.ssl.ConscryptJdkSslEngineInteropTest.checkConscrypt(ConscryptJdkSslEngineInteropTest.java:49)
This regression was introduced by 4448b8f42f and detected on the CI when using:
mvn clean package -DtestJavaHome=$JAVA7_HOME
Modifications:
Move the detection code in an extra class and use it.
Result:
Works correctly also when using Java7.
Motivation:
Starting with 1.0.0.RC9, conscrypt supports a buffer allocator.
Modifications:
- Updated the creation process for the engine to pass through the
ByteBufAllocator.
- Wrap a ByteBufAllocator with an adapter for conscrypt.
- Added a property to optionally control whether conscrypt uses
Netty's buffer allocator.
Result:
Netty+conscrypt will support using Netty's ByteBufAllocator.
Motivation:
We need to ensure we only create the ResourceLeak when the constructor not throws.
Modifications:
Ensure ResourceLeakDetector.track(...) is only called if the constructor of ReferenceCoundedOpenSslEngine not throws.
Result:
No more false-positves.
Motivation:
ByteBuf#ensureWritable(int,boolean) returns an int indicating the status of the resize operation. For buffers that are unmodifiable or cannot be resized this method shouldn't throw but just return 1.
ByteBuf#ensureWriteable(int) should throw unmodifiable buffers.
Modifications:
- ReadOnlyByteBuf should be updated as described above.
- Add a unit test to SslHandler which verifies the read only buffer can be tolerated in the aggregation algorithm.
Result:
Fixes https://github.com/netty/netty/issues/7002.
Motivation:
Lots of usages of SelfSignedCertificates were not deleting the certs at
the end of the test. This includes setupHandlers() which is used by
extending classes. Although these files will be deleted at JVM exit and
deleting them early does not free the JVM from trying to delete them at
shutdown, it's good practice to delete eagerly and since users sometimes
use tests as a form of documentation, it'd be good for them to see the
explicit deletes.
Modifications:
Add missing delete() calls to ½ of the SelfSignedCertificates-using
tests.
Result:
Tests that more clearly communicates which resources are created and
may accumulate without early delete.
Motivation:
Previously filterCipherSuites was being passed the OpenSSL-formatted
cipher names. Commit 43ae974 introduced a regression as it swapped to the
RFC/JDK format, except that user-provided ciphers were not converted and
remained in the OpenSSL format.
This mis-match would cause all user-provided to be thrown away, leading
to failure trying to set zero ciphers:
Exception in thread "main" javax.net.ssl.SSLException: failed to set cipher suite: []
at io.netty.handler.ssl.ReferenceCountedOpenSslContext.<init>(ReferenceCountedOpenSslContext.java:299)
at io.netty.handler.ssl.OpenSslContext.<init>(OpenSslContext.java:43)
at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:347)
at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:335)
at io.netty.handler.ssl.SslContext.newServerContextInternal(SslContext.java:421)
at io.netty.handler.ssl.SslContextBuilder.build(SslContextBuilder.java:441)
Caused by: java.lang.Exception: Unable to configure permitted SSL ciphers (error:100000b1:SSL routines:OPENSSL_internal:NO_CIPHER_MATCH)
at io.netty.internal.tcnative.SSLContext.setCipherSuite(Native Method)
at io.netty.handler.ssl.ReferenceCountedOpenSslContext.<init>(ReferenceCountedOpenSslContext.java:295)
... 7 more
Modifications:
Remove the reformatting of user-provided ciphers, as they are already in
the RFC/JDK format.
Result:
No regression, and the internals stay sane using the RFC/JDK format.
Motivation:
Some ChannelOptions must be set before the Channel is really registered to have the desired effect.
Modifications:
Add another constructor argument which allows to not register the EmbeddedChannel to its EventLoop until the user calls register().
Result:
More flexible usage of EmbeddedChannel. Also Fixes [#6968].
Motivation:
6152990073 introduced a test-case in SSLEngineTest which used OpenSsl.* which should not be done as this is am abstract bass class that is also used for non OpenSsl tests.
Modifications:
Move the protocol definations into SslUtils.
Result:
Cleaner code.
Motivation:
Code introduced in 6152990073 can be cleaned up and use array initializer expressions.
Modifications:
Use array initializer expressions.
Result:
Cleaner code.
Motivation:
TLS doesn't support a way to advertise non-contiguous versions from the client's perspective, and the client just advertises the max supported version. The TLS protocol also doesn't support all different combinations of discrete protocols, and instead assumes contiguous ranges. OpenSSL has some unexpected behavior (e.g. handshake failures) if non-contiguous protocols are used even where there is a compatible set of protocols and ciphers. For these reasons this method will determine the minimum protocol and the maximum protocol and enabled a contiguous range from [min protocol, max protocol] in OpenSSL.
Modifications:
- ReferenceCountedOpenSslEngine#setEnabledProtocols should determine the min/max protocol versions and enable a contiguous range
Result:
OpenSslEngine is more consistent with the JDK's SslEngineImpl and no more unexpected handshake failures due to protocol selection quirks.
Motivation:
Currently the default cipher suites are set independently between JDK and OpenSSL. We should use a common approach to setting the default ciphers. Also the OpenSsl default ciphers are expressed in terms of the OpenSSL cipher name conventions, which is not correct and may be exposed to the end user. OpenSSL should also use the RFC cipher names like the JDK defaults.
Modifications:
- Move the default cipher definition to a common location and use it in JDK and OpenSSL initialization
- OpenSSL should not expose OpenSSL cipher names externally
Result:
Common initialization and OpenSSL doesn't expose custom cipher names.
Motivation:
PR https://github.com/netty/netty/pull/6803 corrected an error in the return status of the OpenSslEngine. We should now be able to restore the SslHandler optimization.
Modifications:
- This reverts commit 7f3b75a509.
Result:
SslHandler optimization is restored.
Motivation:
Each call to SSL_write may introduce about ~100 bytes of overhead. The OpenSslEngine (based upon OpenSSL) is not able to do gathering writes so this means each wrap operation will incur the ~100 byte overhead. This commit attempts to increase goodput by aggregating the plaintext in chunks of <a href="https://tools.ietf.org/html/rfc5246#section-6.2">2^14</a>. If many small chunks are written this can increase goodput, decrease the amount of calls to SSL_write, and decrease overall encryption operations.
Modifications:
- Introduce SslHandlerCoalescingBufferQueue in SslHandler which will aggregate up to 2^14 chunks of plaintext by default
- Introduce SslHandler#setWrapDataSize to control how much data should be aggregated for each write. Aggregation can be disabled by setting this value to <= 0.
Result:
Better goodput when using SslHandler and the OpenSslEngine.
Motivation:
The JDK SSLEngine documentation says that a call to wrap/unwrap "will attempt to consume one complete SSL/TLS network packet" [1]. This limitation can result in thrashing in the pipeline to decode and encode data that may be spread amongst multiple SSL/TLS network packets.
ReferenceCountedOpenSslEngine also does not correct account for the overhead introduced by each individual SSL_write call if there are multiple ByteBuffers passed to the wrap() method.
Modifications:
- OpenSslEngine and SslHandler supports a mode to not comply with the limitation to only deal with a single SSL/TLS network packet per call
- ReferenceCountedOpenSslEngine correctly accounts for the overhead of each call to SSL_write
- SslHandler shouldn't cache maxPacketBufferSize as aggressively because this value may change before/after the handshake.
Result:
OpenSslEngine and SslHanadler can handle multiple SSL/TLS network packet per call.
[1] https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html
Motivation:
SslHandlerTest#testCompositeBufSizeEstimationGuaranteesSynchronousWrite has been observed to fail on CI servers. Knowing how many bytes were seen by the client would be helpful.
Modifications:
- Add bytesSeen to the exception if the client closes early.
Result:
More debug info available.
Motivation:
ErrorProne warns about missing cases in switch statements that
appear as an oversight.
Modifcation:
Add the last case to statement to ensure all cases are covered.
Result:
Able to enable Error Prone static analysis
Motivation:
Enable static linking for Java 8. These commits are the same as those introduced to netty tcnative. The goal is to allow lots of JNI libraries to be statically linked together without having conflict `JNI_OnLoad` methods.
Modification:
* add JNI_OnLoad suffixes to enable static linking
* Add static names to the list of libraries that try to be loaded
* Enable compiling with JNI 1.8
* Sort includes
Result:
Enable statically linked JNI code.
Motivation:
PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.
Modifications:
1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).
Result:
Less code duplication.
Motivation:
For historical reasons OpenSSL's internal naming convention for CHACHA20 based cipher suites does not include the HMAC algorithm in the cipher name. This will prevent the CHACHA20 cipher suites from being used if the RFC cipher names are specified.
Modifications:
- Add a special case for CHACHA20 cipher name conversions in CipherSuiteConverter
- Update OPENSSL_CIPHERSUITE_PATTERN to accommodate the new naming scheme for CHACHA20 cipher suites
Result:
CipherSuiteConverter now works with CHACHA20 cipher suites.
Motivation
It's cleaner to add listeners to returned Futures rather than provided Promises because the latter can have strange side effects in terms of listeners firing and called methods returning. Adding listeners preemtively may yield also to more OPS than necessary when there's an Exception in the to be called method.
Modifications
Add listener to returned ChannelFuture rather than given ChannelPromise
Result
Cleaner completion and exception handling
Motivation:
We had some useless synchronized (ReferenceCountedOpenSslContext.class) blocks in our code which could slow down concurrent collecting and creating of ReferenceCountedOpenSslContext instances. Beside this we missed a few guards.
Modifications:
Use ReadWriteLock to correctly guard. A ReadWriteLock was choosen as SSL.newSSL(...) will be called from multiple threads all the time so using synchronized would be worse and there would be no way for the JIT to optimize it away
Result:
Faster concurrent creating and collecting of ReferenceCountedOpenSslContext instances and correctly guard in all cases.
Motivation:
If the destination buffer is completely filled during a call to OpenSslEngine#wrap(..) we may return NEED_UNWRAP because there is no data pending in the SSL buffers. However during a handshake if the SSL buffers were just drained, and filled up the destination buffer it is possible OpenSSL may produce more data on the next call to SSL_write. This means we should keep trying to call SSL_write as long as the destination buffer is filled and only return NEED_UNWRAP when the destination buffer is not full and there is no data pending in OpenSSL's buffers.
Modifications:
- If the handshake produces data in OpenSslEngine#wrap(..) we should return NEED_WRAP if the destination buffer is completely filled
Result:
OpenSslEngine returns the correct handshake status from wrap().
Fixes https://github.com/netty/netty/issues/6796.
Motivation
RFC 6066 (https://tools.ietf.org/html/rfc6066#page-6) says that the hostname in the SNI extension is ASCII encoded but Netty decodes it using UTF-8.
Modifications
Use ASCII instead of UTF-8
Result
Fixes#6717
Motivation
SslHandler should release any type of SSLEngine if it implements the ReferenceCounted interface
Modifications
Change condition to check for ReferenceCounted interface
Result
Better use of interfaces
Motivation:
We not correctly handle LE buffers when try to read the packet length out of the buffer and just assume it always is a BE buffer.
Modifications:
Correctly account for the endianess of the buffer when reading the packet lenght.
Result:
Fixes [#6709].
