Commit Graph

288 Commits

Author SHA1 Message Date
Scott Mitchell
efca9d180e HTTP/2 HPACK Encoder remove unsued import 2016-10-17 09:25:49 -07:00
buchgr
c9918de37b http2: Make MAX_HEADER_LIST_SIZE exceeded a stream error when encoding.
Motivation:

The SETTINGS_MAX_HEADER_LIST_SIZE limit, as enforced by the HPACK Encoder, should be a stream error and not apply to the whole connection.

Modifications:

Made the necessary changes for the exception to be of type StreamException.

Result:

A HEADERS frame exceeding the limit, only affects a specific stream.
2016-10-17 09:24:06 -07:00
Norman Maurer
5f533b7358 [maven-release-plugin] prepare for next development iteration 2016-10-14 13:20:41 +02:00
Norman Maurer
35fb0babe2 [maven-release-plugin] prepare release netty-4.1.6.Final 2016-10-14 12:47:19 +02:00
buchgr
af8ef3e40c Correctly release debugData and notify the promise when goAway was already sent
Motivation:

Commit 908464f161 also introduced a change to guard against re-entrance but failed to correctly handle the debugData and promise.

Modifications:

Release debugData and correctly notify the promise.

Result:

No more buffer leak and promise is always notified.
2016-10-14 10:57:18 +02:00
Norman Maurer
be8b6c6f24 Correctly add STREAM_WEIGHT header in InboundHttp2ToHttpAdapter.onPushPromiseRead(...)
Motivation:

The weight header with the default value is not set but it should be (rfc7540#5.3.5: …Pushed streams initially depend on their associated stream … are assigned a default weight of 16).

Modifications:

Add STREAM_WEIGHT header.

Result:

Correctly add headers.
2016-10-10 10:38:35 +02:00
Scott Mitchell
540c26bb56 HTTP/2 Ensure default settings are correctly enforced and interfaces clarified
Motivation:
The responsibility for retaining the settings values and enforcing the settings constraints is spread out in different areas of the code and may be initialized with different values than the default specified in the RFC. This should not be allowed by default and interfaces which are responsible for maintaining/enforcing settings state should clearly indicate the restrictions that they should only be set by the codec upon receipt of a SETTINGS ACK frame.

Modifications:
- Encoder, Decoder, and the Headers Encoder/Decoder no longer expose public constructors that allow the default settings to be changed.
- Http2HeadersDecoder#maxHeaderSize() exists to provide some bound when headers/continuation frames are being aggregated. However this is roughly the same as SETTINGS_MAX_HEADER_LIST_SIZE (besides the 32 byte octet for each header field) and can be used instead of attempting to keep the two independent values in sync.
- Encoding headers now enforces SETTINGS_MAX_HEADER_LIST_SIZE at the octect level. Previously the header encoder compared the number of header key/value pairs against SETTINGS_MAX_HEADER_LIST_SIZE instead of the number of octets (plus 32 bytes overhead).
- DefaultHttp2ConnectionDecoder#onData calls shouldIgnoreHeadersOrDataFrame but may swallow exceptions from this method. This means a STREAM_RST frame may not be sent when it should for an unknown stream and thus violate the RFC. The exception is no longer swallowed.

Result:
Default settings state is enforced and interfaces related to settings state are clarified.
2016-10-07 13:00:45 -07:00
buchgr
f010033590 h2childchan: Ability to open outbound/local streams. Fixes #4913
Motivation:

The HTTP/2 child channel API does not allow to create local/outbound HTTP/2 streams.

Modifications:

Add a Http2StreamChannelBootstrap that allows to create outbound streams.

Result:

The HTTP/2 child channel API now supports outbound streams.
2016-10-06 16:12:19 -07:00
Norman Maurer
d1d954da35 [#5866] HttpToHttp2ConnectionHandler / InboundHttp2ToHttpAdapter ignores STREAM_DEPENDENCY_ID and STREAM_WEIGHT.
Motivation:

HttpToHttp2ConnectionHandler.write(ctx, msg, promise) ignores HttpConversionUtil.ExtensionHeaderNames.STREAM_DEPENDENCY_ID header in outbound message. Beside this InboundHttp2ToHttpAdapter also not add the STREAM_DEPENDENCY_ID and STREAM_WEIGHT headers.

Modifications:

Respect STREAM_DEPENDENCY_ID and STREAM_WEIGHT

Result:

Correctly respect STREAM_DEPENDENCY_ID and STREAM_WEIGHT.
2016-10-03 18:05:50 +02:00
radai-rosenblatt
15ac6c4a1f Clean-up unused imports
Motivation:

the build doesnt seem to enforce this, so they piled up

Modifications:

removed unused import lines

Result:

less unused imports

Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
2016-09-30 09:08:50 +02:00
Norman Maurer
3240e97420 [#5862] Http2EventAdapter#onUnknownFrame(...) should throw Http2Exception
Motivation:

Http2EventAdapter implements the Http2FrameListener interface but implements the #onUnknownFrame(...) method without the interface's throws Http2Exception.

Modifications:

Add throws Http2Exception.

Result:

More correct method signature.
2016-09-29 14:22:13 +02:00
buchgr
6a6d422702 Complete documentation of StreamBufferingEncoder.
Motivation:

The StreamBufferingEncoder is missing documentation of what happens
to buffered frames when it's closed.

Modifications:

Added this missing piece of documentation.

Result:

Improved documentation.
2016-09-23 16:39:31 -07:00
Moses Nakamura
0d2baaf6ae codec-http2: Let users configure per-frame logs
Motivation:

codec-http2 is really loud!

Modification:

Allow users to select how to log in the Http2Codec.

Result:

We can run Http2Codec and log however we like.
2016-09-23 14:58:23 -07:00
Scott Mitchell
4145fae919 HTTP/2 HPACK Decoder VarInt Improvement
Motivation:
HTTP/2 Decoder#decodeULE128 current will tolerate more bytes than necessary when attempted to detect overflow. The usage of this method also currently requires an additional overflow conditional.

Modifications:
- Integrate the first byte into Decoder#decodeULE128 which allows us to detect overflow reliably and avoid overflow checks outside of this method.

Result:
Less conditionals and earlier overflow detection in Decoder#decodeULE128
2016-09-22 00:01:54 -07:00
Norman Maurer
3c62a20519 Revert "Ensure we only call debugData.release() if we called debugData.retain()"
This reverts commit 4beb075dd3.
2016-09-16 08:51:11 -07:00
Moses Nakamura
da8734a6f9 codec-http2: Mark requests as chunked in Http2ServerDowngrader
Motivation:

Http2ServerDowngrader doesn't mark chunked requests as chunked, even
though the natural conversion from http/2 requests to http/1.1 requests
is to chunked ones.

Modifications:

Mark requests that aren't already complete as chunked.

Result:

Requests will be chunked, and can later be aggregated if necessary.
2016-09-15 15:58:40 -07:00
buchgr
908464f161 make the http2 codec void promise ready.
Motivation:

Void promises need special treatment, as they don't behave like normal promises. One
cannot add a listener to a void promise for example.

Modifications:

Inspected the code for addListener() calls, and added extra logic for void promises
where necessary. Essentially, when writing a frame with a void promise, any errors
are reported via the channel pipeline's exceptionCaught event.

Result:

The HTTP/2 codec has better support for void promises.
2016-09-15 09:19:57 -07:00
Norman Maurer
4beb075dd3 Ensure we only call debugData.release() if we called debugData.retain()
Motivation:

We need to ensure we only call debugData.release() if we called debugData.retain(), otherwise we my see an IllegalReferenceCountException.

Modifications:

Only call release() if we called retain().

Result:

No more IllegalReferenceCountException possible.
2016-09-12 06:47:38 -07:00
Norman Maurer
51629245d0 Call debugData.retain() before we forward the frame to the pipeline
Motivation:

We need to call debugData.retain() before we forward the frame to the pipeline as ByteToMessageDecoder will call release() on the buffer.

Modifications:

Correctly retain debugData and fix the unit test to test for it.

Result:

No more IllegalReferenceCountException when using the Http2FrameCodec.
2016-09-12 06:45:13 -07:00
Norman Maurer
d2389a9339 [#5762] HTTP/2: SETTINGS_HEADER_TABLE_SIZE should be an unsigned int
Motivation:

he HTTP/2 spec demands that the max value for SETTINGS_HEADER_TABLE_SIZE should be an unsigned 32-bit integer.

Modifications:

Change the limit to unsigned 32-bit integer and add tests.

Result:

Complient to rfc.
2016-09-09 13:20:32 +02:00
Norman Maurer
54b1a100f4 [maven-release-plugin] prepare for next development iteration 2016-08-26 10:06:32 +02:00
buchgr
515f8964b4 HTTP/2: Fix some errors reported by h2spec.
Motivation:

h2spec [1] reported 32 issues [2] with Netty's HTTP/2 implementation.

Modifications:

Fixed 11 of those issues. Mostly wrong error codes or added missing validation
code in the frame reader.

Result:

11 fewer errors. h2spec now reports: 70 tests, 48 passed, 1 skipped, 21 failed

[1] https://github.com/summerwind/h2spec
[2] https://github.com/netty/netty/issues/5761
2016-09-01 08:28:16 +02:00
Norman Maurer
1208b90f57 [maven-release-plugin] prepare release netty-4.1.5.Final 2016-08-26 04:59:35 +02:00
Trustin Lee
5b46cf25c1 Fulfill the write promise of empty HTTP/2 DATA frames sooner
Motivation:

DefaultHttp2ConnectionEncoder.FlowControlledData.write() does not
complete the write promise of empty HTTP/2 DATA frames until either a
non-DATA frame, a non-empty DATA frame or a DATA frame with endOfStream
set. This makes the write promise of the empty DATA frame is notified
much later than it could be.

Modifications:

- Notify the write promise of the empty DATA frames immediately is the
  queue contains empty DATA frames only

Result:

The write promise of an empty DATA frame is notified sooner.
2016-08-26 08:45:09 +09:00
Scott Mitchell
208893aac9 HTTP/2 Hpack Encoder Cleanup
Motivation:
The HTTP/2 HPACK Encoder class has some code which is only used for test purposes. This code can be removed to reduce complexity and member variable count.

Modifications:
- Remove test code and update unit tests
- Other minor cleanup

Result:
Test code is removed from operational code.
2016-08-25 09:08:46 -07:00
Norman Maurer
5fd239c29c Ensure we not log missleading errors if the promise was already failed due errors
Motivation:

In DefaultHttp2ConnectionEncoder we fail the promise in in the FlowControlledData.error(...) method but also add it the CoalescingBufferQueue. Which can lead to have the promise failed by error(...) before it can be failed in CoalescingBufferQueue.

This can lead to confusing and missleading errors in the log like:
    2016-08-12 09:47:43,716       nettyIoExecutorGroup-1-9 [WARN ] PromiseNotifier                - Failed to mark a promise as failure because it's done already: DefaultChannelPromise@374225e0(failure: javax.net.ssl.SSLException: SSLEngine closed already)
    javax.net.ssl.SSLException: SSLEngine closed already
        at io.netty.handler.ssl.SslHandler.wrap(...)(Unknown Source) ~[netty-all-4.1.5.Final-SNAPSHOT.jar:?]

Modifications:

Ensure we only fail the queue (which will also fail the promise).

Result:

No more missleading logs.
2016-08-18 07:17:45 +02:00
buchgr
d568cfc14a HTTP/2: Treat MAX_CONCURRENT_STREAMS exceeded as a stream error.
Motivation:

As per the HTTP/2 spec, exceeding the MAX_CONCURRENT_STREAMS should be treated as a stream error as opposed to a connection error.

"An endpoint that receives a HEADERS frame that causes its advertised concurrent stream limit to be exceeded MUST treat this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR or REFUSED_STREAM." http://httpwg.org/specs/rfc7540.html#rfc.section.5.1.2

Modifications:

Make the error a stream error.

Result:

It's a stream error.
2016-08-17 14:47:15 +02:00
Scott Mitchell
f73c4f24ee HTTP/2 HPACK Bounds Check Fix
Motivation:
21e8d84b79 changed the way bounds checking was done, but however a bounds check in the case of READ_LITERAL_HEADER_NAME_LENGTH_PREFIX was using an old value. This would delay when the bounds check would actually be done and potentially allow more allocation than necessary.

Modifications:
- Use the new length (index) in the bounds check instead of an old length (nameLength) which had not yet been assigned to the new value.

Result:
More correct bounds checking.
2016-08-13 11:04:26 -07:00
Scott Mitchell
21e8d84b79 HTTP/2 Simplify Headers Decode Bounds Checking
Motivation:
The HPACK decoder keeps state so that the decode method can be called multiple times with successive header fragments. This decoder also requires that a method is called to signify the decoding is complete. At this point status is returned to indicate if the max header size has been violated. Netty always accumulates the header fragments into a single buffer before attempting to HPACK decode process and so keeping state and delaying notification that bounds have been exceeded is not necessary.

Modifications:
- HPACK Decoder#decode(..) now must be called with a complete header block
- HPACK will terminate immediately if the maximum header length, or maximum number of headers is exceeded
- Reduce member variables in the HPACK Decoder class because they can now live in the decode(..) method

Result:
HPACK bounds checking is done earlier and less class state is needed.
2016-08-12 17:12:53 -07:00
Scott Mitchell
4d74bf3984 HTTP/2 MaxStreams cleanup
Motivation:
765e944d4d imposed a limit on the maximum number of stream in all states. However the default limit did not allow room for streams in addition to SETTINGS_MAX_CONCURRENT_STREAMS. This can mean streams in states outside the states which SETTINGS_MAX_CONCURRENT_STREAMS applies to may not be reliably created.

Modifications:
- The default limit should be larger than SETTINGS_MAX_CONCURRENT_STREAMS

Result:
More lenient limit is applied to maxStreams by default.
2016-08-11 09:38:58 -07:00
Scott Mitchell
765e944d4d HTTP/2 limit streams in all states
Motivation:
SETTINGS_MAX_CONCURRENT_STREAMS does not apply to idle streams and thus we do not apply any explicit limitations on how many idle streams can be created. This may allow a peer to consume an undesirable amount of resources.

Modifications:
- Each Endpoint should enforce a limit for streams in a any state. By default this limit will be the same as SETTINGS_MAX_CONCURRENT_STREAMS but can be overridden if necessary.

Result:
There is now a limit to how many IDLE streams can be created.
2016-08-11 09:01:37 -07:00
Scott Mitchell
a4ad68239e Http2ConnectionDecoder remove localSettings setter method
Motivation:
Http2ConnectionDecoder#localSettings(Http2Settings) is not used in codec-http2 and currently results in duplicated code.

Modifications:
- Remove Http2ConnectionDecoder#localSettings(Http2Settings)

Result:
Smaller interface and less duplicated code.
2016-08-10 12:23:03 -07:00
Norman Maurer
cb7cf4491c [maven-release-plugin] prepare for next development iteration 2016-07-27 13:29:56 +02:00
Norman Maurer
9466b32d05 [maven-release-plugin] prepare release netty-4.1.4.Final 2016-07-27 13:16:59 +02:00
buchgr
328510468c Complete ChannelPromise for Http2WindowUpdateFrames in Http2FrameCodec. Fixes #5530
Motivation:

The channel promise of a window update frame is not completed correctly,
depending on the failure or success of the operation.

Modification:

Succeed / Fail the promise if the window update succeeds / fails.

Result:

Correctly succeed / fail the promise.
2016-07-15 17:29:41 +02:00
Norman Maurer
047f6aed28 [maven-release-plugin] prepare for next development iteration 2016-07-15 09:09:13 +02:00
Norman Maurer
b2adea87a0 [maven-release-plugin] prepare release netty-4.1.3.Final 2016-07-15 09:08:53 +02:00
Oliver Gould
f2ce28bf18 Satisfy write promise when writing an Http2WindowUpdateFrame to Http2FrameCodec.
Motivation:

When writing an Http2WindowUpdateFrame to an Http2FrameCodec, the
ChannelPromise is never satisfied, so callers cannot generically rely on the
write future being satisfied on success.

Modifications:

When writing Http2WindowUpdateFrame, Http2FrameCodec now satisfies the
ChannelPromise immediately.

Result:

The write future is satisfied on successful writes.

Fixes netty/netty#5530.
2016-07-13 21:31:34 +02:00
Scott Mitchell
9de90d07a9 DefaultHttp2RemoteFlowController reentry infinite loop
Motivation:
DefaultHttp2RemoteFlowController.writePendingBytes does not support reentry but does not enforce this constraint. Reentry is possible if the channel transitions from Writable -> Not Writable -> Writable during the distribution phase. This can happen if the user flushes when notified of the channel transitioning to the not writable state, and may be done if the user wants to fill the channel outbound buffer before flushing.

Modifications:
- DefaultHttp2RemoteFlowController.writePendingBytes should protect against reentry

Result:
DefaultHttp2RemoteFlowController will not allocate unexpected amounts or enter an infinite loop.
2016-07-13 09:12:33 -07:00
Scott Mitchell
4baff691b4 DefaultPromise make listeners not volatile
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.

Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed

Result:
DefaultPromise.listeners is no longer volatile.
2016-07-07 12:53:03 -07:00
Norman Maurer
6492cb98b2 Revert "DefaultPromise make listeners not volatile"
This reverts commit 4d8132ff24 as I missed something I want to discuss first.
2016-07-07 08:37:41 +02:00
Scott Mitchell
4d8132ff24 DefaultPromise make listeners not volatile
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.

Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed

Result:
DefaultPromise.listeners is no longer volatile.
2016-07-07 08:01:25 +02:00
Norman Maurer
4676a2271c [maven-release-plugin] prepare for next development iteration 2016-07-01 10:33:32 +02:00
Norman Maurer
ad270c02b9 [maven-release-plugin] prepare release netty-4.1.2.Final 2016-07-01 09:07:40 +02:00
Scott Mitchell
6af56ffe76 HPACK Encoder headerFields improvements
Motivation:
HPACK Encoder has a data structure which is similar to a previous version of DefaultHeaders. Some of the same improvements can be made.

Motivation:
- Enforce the restriction that the Encoder's headerFields length must be a power of two so we can use masking instead of modulo
- Use AsciiString.hashCode which already has optimizations instead of having yet another hash code algorithm in Encoder

Result:
Fixes https://github.com/netty/netty/issues/5357
2016-06-30 09:00:12 -07:00
Scott Mitchell
a7f7d9c8e0 Remove unsafe char[] access in PlatformDependent
Motivation:
PlatformDependent attempts to use reflection to get the underlying char[] (or byte[]) from String objects. This is fragile as if the String implementation does not utilize the full array, and instead uses a subset of the array, this optimization is invalid. OpenJDK6 and some earlier versions of OpenJDK7 String have the capability to use a subsection of the underlying char[].

Modifications:
- PlatformDependent should not attempt to use the underlying array from String (or other data types) via reflection

Result:
PlatformDependent hash code generation for CharSequence does not depend upon specific JDK implementation details.
2016-06-30 08:58:28 -07:00
Scott Mitchell
df41be6fc8 HTTP/2 Decoder validate that GOAWAY lastStreamId doesn't increase
Motivation:
The HTTP/2 RFC states in https://tools.ietf.org/html/rfc7540#section-6.8 that Endpoints MUST NOT increase the value they send in the last stream identifier however we don't enforce this when decoding GOAWAY frames.

Modifications:
- Throw a connection error if the peer attempts to increase the lastStreamId in a GOAWAY frame

Result:
RFC is more strictly enforced.
2016-06-29 07:53:13 -07:00
buchgr
3613d15bca Split Http2MultiplexCodec into Frame- and MultiplexCodec + Tests. Fixes #4914
Motivation:

Quote from issue 4914:
"Http2MultiplexCodec currently does two things: mapping the existing h2 API to frames and managing the child channels.

It would be better if the two parts were separated. This would allow less-coupled development of the HTTP/2 handlers (flow control could be its own handler, for instance) and allow applications to insert themselves between all streams and the codec, which permits custom logic and could be used, in part, to implement custom frame types.

It would also greatly ease testing, as the child channel could be tested by itself without dealing with how frames are encoded on the wire."

Modifications:

- Split the Http2MultiplexCodec into Http2FrameCodec and Http2MultiplexCodec. The Http2FrameCodec interacts with the existing HTTP/2 callback-based API, while the Http2MulitplexCodec is completely independent of it and simply multiplexes Http2StreamFrames to the child channels. Additionally, the Http2Codec handler is introduced, which is a convenience class that simply sets up the Http2FrameCodec and Http2MultiplexCodec in the channel pipeline and removes itself.

- Improved test coverage quite a bit.

Result:

- The original Http2MultiplexCodec is split into Http2FrameCodec and Http2MultiplexCodec.
- More tests for higher confidence in the code.
2016-06-29 07:22:09 +02:00
Scott Mitchell
70651cc58d HpackUtil.equals performance improvement
Motivation:
PR #5355 modified interfaces to reduce GC related to the HPACK code. However this came with an anticipated performance regression related to HpackUtil.equals due to AsciiString's increase cost of charAt(..). We should mitigate this performance regression.

Modifications:
- Introduce an equals method in PlatformDependent which doesn't leak timing information and use this in HpcakUtil.equals

Result:
Fixes https://github.com/netty/netty/issues/5436
2016-06-27 14:37:39 -07:00
buchgr
73c4ad5f0a http2: count pad length field toward flow control. Fixes #5434
Motivation:
The HTTP/2 specification requires the pad length field of DATA, HEADERS and PUSH_PROMISE frames to be counted towards the flow control window. The current implementation doesn't do so (See #5434).

Furthermore, it's currently not possible to add one byte padding, as this would add the one byte pad length field as well as append one padding byte to the end of the frame.

Modifications:
Include the one byte pad length field in the padding parameter of the API. Thereby extending the allowed value range by one byte to 256 (inclusive). On the wire, a one byte padding is encoded with a pad length field with value zero and a 256 byte padding is encoded with a pad length field with value 255 and 255 bytes append to the end of the frame.

Result:
More correct padding.
2016-06-25 09:51:36 -07:00