Motivation:
When an HttpResponseDecoder decodes an invalid chunk, a LastHttpContent instance is produced and the decoder enters the 'BAD_MESSAGE' state, which is not supposed to produce a message any further. However, because HttpObjectDecoder.invalidChunk() did not clear this.message out to null, decodeLast() will produce another LastHttpContent message on a certain situation.
Modification:
Do not forget to null out HttpObjectDecoder.message in invalidChunk(), and add a test case for it.
Result:
No more consecutive LastHttpContent messages produced by HttpObjectDecoder.
Motivation:
Currently, it is impossible to give a user the full control over what to do in response to the request with 'Expect: 100-continue' header. Currently, a user have to do one of the following:
- Accept the request and respond with 100 Continue, or
- Send the reject response and close the connection.
.. which means it is impossible to send the reject response and keep the connection alive so that the client sends additional requests.
Modification:
Added a public method called 'reset()' to HttpObjectDecoder so that a user can reset the state of the decoder easily. Once called, the decoder will assume the next input will be the beginning of a new request.
HttpObjectAggregator now calls `reset()`right after calling 'handleOversizedMessage()' so that the decoder can continue to decode the subsequent request even after the request with 'Expect: 100-continue' header is rejected.
Added relevant unit tests / Minor clean-up
Result:
This commit completes the fix of #2211
- Since Netty 4, HTTP decoder does not generate a full message at all. Therefore, there's no need to keep separate states for the content smaller than maxChunkSize.
- maxChunkSize must be greater than 0. Setting it to 0 should not disable chunked encoding. We have a dedicated flag for that.
- Uncommented the tests that were commented out for an unknown reason, with some fixes.
- Added more tests for HTTP decoder.
- Removed the Ignore annotation on some tests.
- write() now accepts a ChannelPromise and returns ChannelFuture as most
users expected. It makes the user's life much easier because it is
now much easier to get notified when a specific message has been
written.
- flush() does not create a ChannelPromise nor returns ChannelFuture.
It is now similar to what read() looks like.
- Remove channelReadSuspended because it's actually same with messageReceivedLast
- Rename messageReceived to channelRead
- Rename messageReceivedLast to channelReadComplete
We renamed messageReceivedLast to channelReadComplete because it
reflects what it really is for. Also, we renamed messageReceived to
channelRead for consistency in method names.
I must admit MesageList was pain in the ass. Instead of forcing a
handler always loop over the list of messages, this commit splits
messageReceived(ctx, list) into two event handlers:
- messageReceived(ctx, msg)
- mmessageReceivedLast(ctx)
When Netty reads one or more messages, messageReceived(ctx, msg) event
is triggered for each message. Once the current read operation is
finished, messageReceivedLast() is triggered to tell the handler that
the last messageReceived() was the last message in the current batch.
Similarly, for outbound, write(ctx, list) has been split into two:
- write(ctx, msg)
- flush(ctx, promise)
Instead of writing a list of message with a promise, a user is now
supposed to call write(msg) multiple times and then call flush() to
actually flush the buffered messages.
Please note that write() doesn't have a promise with it. You must call
flush() to get notified on completion. (or you can use writeAndFlush())
Other changes:
- Because MessageList is completely hidden, codec framework uses
List<Object> instead of MessageList as an output parameter.
- SimpleChannelInboundHandler now has a constructor parameter to let a
user decide to enable automatic message release. (the default is to
enable), which makes ChannelInboundConsumingHandler of less value.
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.
Memory consumption issue:
When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user. In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.
Memory footprint issue:
The old Netty 4 API decreased overall memory footprint by a great deal
in many cases. It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read. Instead, it
created a new buffer for each handler in a pipeline. This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.
Changes:
All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.
To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:
- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
- Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
- Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
- Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
- Similar to ReceiveBufferSizePredictor in Netty 3
- Some existing configuration properties such as
DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf
This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
- Fixes#1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
- Fixes#1308
freeInboundBuffer() and freeOutboundBuffer() were introduced in the early days of the new API when we did not have reference counting mechanism in the buffer. A user did not want Netty to free the handler buffers had to override these methods.
However, now that we have reference counting mechanism built into the buffer, a user who wants to retain the buffers beyond handler's life cycle can simply return the buffer whose reference count is greater than 1 in newInbound/OutboundBuffer().
This change also introduce a few other changes which was needed:
* ChannelHandler.beforeAdd(...) and ChannelHandler.beforeRemove(...) were removed
* ChannelHandler.afterAdd(...) -> handlerAdded(...)
* ChannelHandler.afterRemoved(...) -> handlerRemoved(...)
* SslHandler.handshake() -> SslHandler.hanshakeFuture() as the handshake is triggered automatically after
the Channel becomes active
- Use state machine to simplify the code
- Always produce a chunked response for simplicity
- Change the signature of beginEncode() - HttpContent was simply unnecessary.
- Add more test cases
- Fixes#1280
- Add 'Content-Length' and remove 'Transfer-Encoding' in case of FullHttpMessage
- Remove 'Content-Length' and add 'Transfer-Encoding: chunked' in case of non-full HttpMessage
- Fixes#1275
* This is done because we noticed that the previous change limit the usage more then it gave us any benefit. Now it is possible
again to rewrite the url on the fly or reuse the objects when writing a proxy and so limit the GC pressure.
* Fixes also #979
- Rename message types for clarity
- HttpMessage -> FullHttpMessage
- HttpHeader -> HttpMessage
- HttpRequest -> FullHttpRequest
- HttpResponse -> FulllHttpResponse
- HttpRequestHeader -> HttpRequest
- HttpResponseHeader -> HttpResponse
- HttpContent now extends ByteBufHolder; no more content() method
- Make HttpHeaders abstract, make its header access methods public, and
add DefaultHttpHeaders
- Header accessor methods in HttpMessage and LastHttpContent are
replaced with HttpMessage.headers() and
LastHttpContent.trailingHeaders(). Both methods return HttpHeaders.
- Remove setters wherever possible and remove 'get' prefix
- Instead of calling setContent(), a user can either specify the content
when constructing a message or write content into the buffer.
(e.g. m.content().writeBytes(...))
- Overall cleanup & fixes
This commit tries to simplify the handling of Http easier and more consistent. This has a effect of many channges. Including:
- HttpMessage was renamed to HttpHeader and the setContent and getContent methods were removed
- HttpChunk was renamed to HttpContent
- HttpChunkTrailer was renamed to LastHttpContent
- HttpCodecUtil was merged into HttpHeaders
Now a "complete" Http message (request or response) contains of the following parts:
- HttpHeader (HttpRequestHeader or HttpResponseHeader)
- 0 - n HttpContent objects which contains parts of the content of the message
- 1 LastHttpContent which marks the end of the message and contains the remaining data of the content
I also changed the sematic of HttpResponse and HttpRequest, these now represent a "complete" message which contains the HttpHeader and the HttpLastContent, and so can be used to eeasily send requests. The HttpMessageAggregator was renamed to HttpObjectAggregator and produce HttpResponse / HttpRequest message.
- Also fixed a incorrect port of SpdySessionHandler
- Previously, it closed the connection too early when sending a GOAWAY frame
- After this fix, SpdySessionHandlerTest now passes again without the previous fix
- Fixes#831
This commit ensures the following events are never triggered as a direct
invocation if they are triggered via ChannelPipeline.fire*():
- channelInactive
- channelUnregistered
- exceptionCaught
This commit also fixes the following issues surfaced by this fix:
- Embedded channel implementations run scheduled tasks too early
- SpdySessionHandlerTest tries to generate inbound data even after the
channel is closed.
- AioSocketChannel enters into an infinite loop on I/O error.
* Update toString() of all HttpObject implementations
* HttpMessageDecoder does not raise an exception but sets decoderResult property of the decoded message.
* HttpMessageDecoder discards inbound traffic once decoding fails, by adding a new state called BAD_MESSAGE.
* Add a test case that tests this behavior.
- Replace ByteBufferBackedByteBuf with DirectByteBuf
- Make DirectByteBuf and HeapByteBuf dynamic
- Remove DynamicByteBuf
- Replace Unpooled.dynamicBuffer() with Unpooled.buffer() and
directBuffer()
- Remove ByteBufFactory (will be replaced with ByteBufPool later)
- Add ByteBuf.Unsafe (might change in the future)
- Add MessageBuf which replaces java.util.Queue
- Add ChannelBuf which is common type of ByteBuf and ChannelBuf
- ChannelBuffers was renamed to ByteBufs
- Add MessageBufs
- All these changes are going to replace ChannelBufferHolder.
- ChannelBuffer gives a perception that it's a buffer of a
channel, but channel's buffer is now a byte buffer or a message
buffer. Therefore letting it be as is is going to be confusing.
- In computing, 'stream' means both byte stream and message stream,
which is confusing.
- Also, we were already mixing stream and byte in some places and
it's better use the terms consistently.
(e.g. inboundByteBuffer & inbound stream)
- Some tests like SpdySessionHandlerTest accesses outbound buffer
even before the outbound buffer is initialized by
AbstractEmbeddedChannel's subclasses, leading to NPE at <init>.
To fix this problem, subclasses now pass the outbound buffer as
a constructor parameter to AbstractEmbeddedChannel.
- Extracted some handler methods from ChannelInboundHandler into
ChannelStateHandler
- Extracted some handler methods from ChannelOutboundHandler into
ChannelOperationHandler
- Moved exceptionCaught and userEventTriggered are now in
ChannelHandler
- Channel(Inbound|Outbound)HandlerContext is merged into
ChannelHandlerContext
- ChannelHandlerContext adds direct access methods for inboud and
outbound buffers
- The use of ChannelBufferHolder is minimal now.
- Before: inbound().byteBuffer()
- After: inboundByteBuffer()
- Simpler and better performance
- Bypass buffer types were removed because it just does not work at all
with the thread model.
- All handlers that uses a bypass buffer are broken. Will fix soon.
- CombinedHandlerAdapter does not make sense anymore either because
there are four handler interfaces to consider and often the two
handlers will implement the same handler interface such as
ChannelStateHandler. Thinking of better ways to provide this feature
- AbstractCodecEmbedder does not throw an exception immediately anymore.
It stores the caught exceptions in the product queue and throws them
on pool() or peek().
- The handler you specify with initializer() is actually simply added
to the pipeline and that's all. It's ChannelInitializer which does
additional work. For example, a user can specify just a single
handler with initializer() and it will still work. This is especially
common for Bootstrap, so I renamed initializer to handler, which makes
more sense.
- Add EventExecutor and make EventLoop extend it
- Add SingleThreadEventExecutor and MultithreadEventExecutor
- Add EventExecutor's default implementation
- Fixed an API design problem where there is no way to get non-bypass
buffer of desired type
- Renamed ChannelBootstrap to Bootstrap
- Renamed ServerChannelBootstrap to ServerBootstrap
- Moved bootstrap classes to io.netty.bootstrap as before
- Moved unfoldAndAdd() to a separate utility class
- Fixed a bug in unfoldAndAdd() where it did not handle ChannelBuffer
correctly
- Previous API did not support the pipeline which contains multiple
MessageToStreamEncoders because there was no way to find the closest
outbound byte buffer. Now you always get the correct buffer even if
the handler that provides the buffer is placed distantly.
For example:
Channel -> MsgAEncoder -> MsgBEncoder -> MsgCEncoder
Msg(A|B|C)Encoder will all have access to the channel's outbound
byte buffer. Previously, it was simply impossible.
- Improved ChannelBufferHolder.toString()
- Replaced FrameDecoder and OneToOne(Encoder|Decoder) with:
- (Stream|Message)To(String|Message)(Encoder|Decoder)
- Moved the classes in 'codec.frame' up to 'codec'
- Fixed some bugs found while running unit tests
- Channel now creates a ChannelPipeline by itself
I find no reason to allow a user to use one's own pipeline
implementation since I saw nobody does except for the cases where a
user wants to add a user attribute to a channel, which is now covered
by AttributeMap.
- Removed ChannelEvent and its subtypes because they are replaced by
direct method invocation.
- Replaced ChannelSink with Channel.unsafe()
- Various getter renaming (e.g. Channel.getId() -> Channel.id())
- Added ChannelHandlerInvoker interface
- Implemented AbstractChannel and AbstractServerChannel
- Some other changes I don't remember
* Limited maximum number of parameters to 1024 by default and made the
limitation configurable
* QueryStringDecoder is now able to handle an HTTP POST content
Split the project into the following modules:
* common
* buffer
* codec
* codec-http
* transport
* transport-*
* handler
* example
* testsuite (integration tests that involve 2+ modules)
* all (does nothing yet, but will make it generate netty.jar)
This commit also fixes the compilation errors with transport-sctp on
non-Linux systems. It will at least compile without complaints.
