Commit Graph

88 Commits

Author SHA1 Message Date
Trustin Lee
3f8194557b Clean up the examples
Motivation:

The examples have not been updated since long time ago, showing various
issues fixed in this commit.

Modifications:

- Overall simplification to reduce LoC
  - Use system properties to get options instead of parsing args.
  - Minimize option validation
  - Just use System.out/err instead of Logger
  - Do not pass config as parameters - just access it directly
  - Move the main logic to main(String[]) instead of creating a new
    instance meaninglessly
    - Update netty-build-21 to make checkstyle not complain
  - Remove 'throws Exception' clause if possible
- Line wrap at 120 (previously at 80)
- Add an option to enable SSL for most examples
- Use ChannelFuture.sync() instead of await()
- Use System.out for the actual result. Use System.err otherwise.
- Delete examples that are not very useful:
  - applet
  - websocket/html5
  - websocketx/sslserver
  - localecho/multithreaded
- Add run-example.sh which simplifies launching an example from command
  line
- Rewrite FileServer example

Result:

Shorter and simpler examples.  A user can focus more on what it actually
does than miscellaneous stuff.  A user can launch an example very
easily.
2014-05-23 16:58:47 +09:00
Norman Maurer
79fc0d2408 Correctly handle SocksCmdResponse. Related to #2428
Motivation:
Ports range check is not correct

Modification:
Allow port between 0 and 65535. 0 is wildcard / unknown port here

Result:
Correct validation
2014-04-30 10:45:14 +02:00
Norman Maurer
9707eba2b3 [#2428] Proper fix of incorrect port range check
Motivation:

In the Internet Protocol, the valid port number range is from 1 to 65535
(inclusive on the both side.)  However, SocksCmdRequest and SocksCmdResponse
refuses to construct itself when the port number 65535 is specified. Beside
this it excepts 0 as port number which should not allowed.

    Modification:

* Not raise an exception when the specified port number is 65535.
* Raise an exception when the specified port number is 0

Result:

Fixes #2428
2014-04-30 08:19:13 +02:00
Trustin Lee
9530f19a58 Fix incorrect port range check
Motivation:

In the Internet Protocol, the valid port number range is from 1 to 65535
(inclusive on the both side.)  However, SocksCmdRequest refuses to
construct itself when the port number 65535 is specified.

Modification:

Do not raise an exception when the specified port number is 65535.

Result:

Fixes #2428
2014-04-29 17:55:13 +09:00
Trustin Lee
50f8cc98d1 Fix an inspector warning 2014-02-06 15:03:03 -08:00
Trustin Lee
4a86446053 Fix the potential copyright issue in SocksCommonUtils
- Add StringUtil.toHexString() methods which are based on LoggingHandler's lookup table implementation, and use it wherever possible
2014-02-06 15:01:55 -08:00
Vladimir Schafer
5c4063b6a9 #2177 Adding support for bound host and port for the SOCKS5 command response. Changes are fully backward compatible. 2014-02-04 19:22:27 +01:00
Trustin Lee
f3a842ecca [maven-release-plugin] prepare for next development iteration 2013-12-22 22:06:15 +09:00
Trustin Lee
888dfba76f [maven-release-plugin] prepare release netty-5.0.0.Alpha1 2013-12-22 22:06:06 +09:00
Trustin Lee
94d6e44bba Change the return type of EmbeddedChannel.read*() from Object to an ad-hoc type parameter
.. so that there's no need to explicitly down-cast.

Fixes #2067
2013-12-16 22:22:47 +09:00
Trustin Lee
807d96ed6c Simplify bundle generation / Add io.netty.versions.properties to all JARs
- Fixes #2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging.  This is
  more robust because some strict build tools fail to retrieve the
  artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
  provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
  during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
2013-11-26 22:00:14 +09:00
Trustin Lee
6b0025430e Bump the version to 5.0.0.Alpha1 2013-11-04 19:14:40 +09:00
Norman Maurer
09a748abdb Bump up version to 4.1.0.Alpha1-SNAPSHOT 2013-08-26 15:18:18 +02:00
Norman Maurer
2e39b25cd4 [maven-release-plugin] prepare for next development iteration 2013-08-26 12:01:03 +02:00
Norman Maurer
b67659a866 [maven-release-plugin] prepare release netty-4.0.8.Final 2013-08-26 12:00:54 +02:00
Norman Maurer
1d3560e389 [maven-release-plugin] prepare for next development iteration 2013-08-08 13:53:28 +02:00
Norman Maurer
8e97e6c461 [maven-release-plugin] prepare release netty-4.0.7.Final 2013-08-08 13:53:19 +02:00
Norman Maurer
3f2000fa3a [maven-release-plugin] prepare for next development iteration 2013-08-01 10:59:55 +02:00
Norman Maurer
3f70d5caa4 [maven-release-plugin] prepare release netty-4.0.6.Final 2013-08-01 10:59:46 +02:00
Norman Maurer
e3410680de [maven-release-plugin] prepare for next development iteration 2013-07-31 20:08:14 +02:00
Norman Maurer
0e124583d6 [maven-release-plugin] prepare release netty-4.0.5.Final 2013-07-31 20:08:05 +02:00
Norman Maurer
0bc7d3f5d1 [maven-release-plugin] prepare for next development iteration 2013-07-23 10:04:23 +02:00
Norman Maurer
ca00182797 [maven-release-plugin] prepare release netty-4.0.4.Final 2013-07-23 10:04:14 +02:00
Trustin Lee
b130ee6a6c [maven-release-plugin] prepare for next development iteration 2013-07-18 11:17:42 +09:00
Trustin Lee
10d395e829 [maven-release-plugin] prepare release netty-4.0.3.Final 2013-07-18 11:17:31 +09:00
Norman Maurer
fc7c950b08 [maven-release-plugin] prepare for next development iteration 2013-07-17 15:58:36 +02:00
Norman Maurer
bbbf72359e [maven-release-plugin] prepare release netty-4.0.2.Final 2013-07-17 15:58:28 +02:00
Trustin Lee
57eb531eb8 [maven-release-plugin] prepare for next development iteration 2013-07-16 17:16:10 +09:00
Trustin Lee
76cefcc421 [maven-release-plugin] prepare release netty-4.0.1.Final 2013-07-16 17:15:54 +09:00
Norman Maurer
5297eba280 [maven-release-plugin] prepare for next development iteration 2013-07-15 15:48:15 +02:00
Norman Maurer
c5d8af446a [maven-release-plugin] prepare release netty-4.0.0.Final 2013-07-15 15:48:05 +02:00
Trustin Lee
246a3ecdcb [maven-release-plugin] prepare for next development iteration 2013-07-15 20:58:33 +09:00
Trustin Lee
e8fd209115 [maven-release-plugin] prepare release netty-4.0.0.Final 2013-07-15 20:58:21 +09:00
Trustin Lee
cbd8817905 Remove MessageList from public API and change ChannelInbound/OutboundHandler accordingly
I must admit MesageList was pain in the ass.  Instead of forcing a
handler always loop over the list of messages, this commit splits
messageReceived(ctx, list) into two event handlers:

- messageReceived(ctx, msg)
- mmessageReceivedLast(ctx)

When Netty reads one or more messages, messageReceived(ctx, msg) event
is triggered for each message.  Once the current read operation is
finished, messageReceivedLast() is triggered to tell the handler that
the last messageReceived() was the last message in the current batch.

Similarly, for outbound, write(ctx, list) has been split into two:

- write(ctx, msg)
- flush(ctx, promise)

Instead of writing a list of message with a promise, a user is now
supposed to call write(msg) multiple times and then call flush() to
actually flush the buffered messages.

Please note that write() doesn't have a promise with it.  You must call
flush() to get notified on completion. (or you can use writeAndFlush())

Other changes:

- Because MessageList is completely hidden, codec framework uses
  List<Object> instead of MessageList as an output parameter.
2013-07-09 23:51:48 +09:00
Norman Maurer
ec5e793a2f [maven-release-plugin] prepare for next development iteration 2013-07-02 11:41:18 +02:00
Norman Maurer
ca73eaef0d [maven-release-plugin] prepare release netty-4.0.0.CR9 2013-07-02 11:41:09 +02:00
Norman Maurer
830c559405 [maven-release-plugin] rollback the release of netty-4.0.0.CR9 2013-07-02 11:34:29 +02:00
Norman Maurer
66a16b133c [maven-release-plugin] prepare release netty-4.0.0.CR9 2013-07-02 10:45:12 +02:00
Trustin Lee
7e3a01cc51 [maven-release-plugin] prepare for next development iteration 2013-07-02 10:26:48 +09:00
Trustin Lee
149db34c19 [maven-release-plugin] prepare release netty-4.0.0.CR8 2013-07-02 10:26:32 +09:00
Trustin Lee
613547b0b9 [maven-release-plugin] prepare for next development iteration 2013-06-28 22:15:33 +09:00
Trustin Lee
a6abd2feb2 [maven-release-plugin] prepare release netty-4.0.0.CR7 2013-06-28 22:15:20 +09:00
Trustin Lee
a6795d7780 [maven-release-plugin] prepare for next development iteration 2013-06-25 11:07:15 +09:00
Trustin Lee
2221446425 [maven-release-plugin] prepare release netty-4.0.0.CR6 2013-06-25 11:07:15 +09:00
Trustin Lee
a5871dfd86 [maven-release-plugin] prepare for next development iteration 2013-06-14 12:55:15 +09:00
Trustin Lee
f5377cc8d7 [maven-release-plugin] prepare release netty-4.0.0.CR5 2013-06-14 12:55:05 +09:00
Trustin Lee
e5ca6518ba [maven-release-plugin] prepare for next development iteration 2013-06-13 17:02:32 +09:00
Trustin Lee
381063e09c [maven-release-plugin] prepare release netty-4.0.0.CR4 2013-06-13 17:02:19 +09:00
Trustin Lee
14158070bf Revamp the core API to reduce memory footprint and consumption
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.

Memory consumption issue:

When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user.  In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.

Memory footprint issue:

The old Netty 4 API decreased overall memory footprint by a great deal
in many cases.  It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read.  Instead, it
created a new buffer for each handler in a pipeline.  This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.

Changes:

All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.

To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:

- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
  - Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
  - Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
  - Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
  ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
  - Similar to ReceiveBufferSizePredictor in Netty 3
  - Some existing configuration properties such as
    DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf

This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
2013-06-10 16:10:39 +09:00
Norman Maurer
81e3c1719a [maven-release-plugin] prepare for next development iteration 2013-05-18 09:59:13 +02:00