Motivation:
MpscLinkedQueue has various issues:
- It does not work without sun.misc.Unsafe.
- Some field names are confusing.
- Node.tail does not refer to the tail node really.
- The tail node is the starting point of iteration. I think the tail
node should be the head node and vice versa to reduce confusion.
- Some important methods are not implemented (e.g. iterator())
- Not serializable
- Potential false cache sharing problem due to lack of padding
- MpscLinkedQueue extends AtomicReference and thus exposes various
operations that mutates the internal state of the queue directly.
Modifications:
- Use AtomicReferenceFieldUpdater wherever possible so that we do not
use Unsafe directly. (e.g. use lazySet() instead of putOrderedObject)
- Extend AbstractQueue to implement most operations
- Implement serialization and iterator()
- Rename tail to head and head to tail to reduce confusion.
- Rename Node.tail to Node.next.
- Fix a leak where the references in the removed head are not cleared
properly.
- Add Node.clearMaybe() method so that the value of the new head node
is cleared if possible.
- Add some comments for my own educational purposes
- Add padding to the head node
- Add FullyPaddedReference and RightPaddedReference for future reuse
- Make MpscLinkedQueue package-local so that a user cannot access the
dangerous yet public operations exposed by the superclass.
- MpscLinkedQueue.Node becomes MpscLinkedQueueNode, a top level class
Result:
- It's more like a drop-in replacement of ConcurrentLinkedQueue for the
MPSC case.
- Works without sun.misc.Unsafe
- Code potentially easier to understand
- Fixed leak (related: #2372)
Motivation:
When running Netty on a container environment, the container will often
complain about the lingering threads such as the worker threads of
ThreadDeathWatcher and GlobalEventExecutor. We should provide an
operation that allows a use to wait until such threads are terminated.
Modifications:
- Add awaitInactivity()
- (misc) Fix typo in GlobalEventExecutorTest
- (misc) Port ThreadDeathWatch's CAS-based thread life cycle management
to GlobalEventExecutor
Result:
- Fixes#2084
- Less overhead on task submission of GlobalEventExecutor
Motivation:
PooledByteBufAllocator's thread local cache and
ReferenceCountUtil.releaseLater() are in need of a way to run an
arbitrary logic when a certain thread is terminated.
Modifications:
- Add ThreadDeathWatcher, which spawns a low-priority daemon thread
that watches a list of threads periodically (every second) and
invokes the specified tasks when the associated threads are not alive
anymore
- Start-stop logic based on CAS operation proposed by @tea-dragon
- Add debug-level log messages to see if ThreadDeathWatcher works
Result:
- Fixes#2519 because we don't use GlobalEventExecutor anymore
- Cleaner code
Motivation:
The current DefaultAttributeMap cause an infinite-loop when the user removes an attribute and create the same attribute again. This regression was introduced by c3bd7a8ff1.
Modification:
Correctly break out loop
Result:
No infinite-loop anymore.
Motivation:
When (listeners == null && lateListeners == null) and (stackDepth >= MAX_LISTENER_STACK_DEPTH), the listener is not notified at all. The discard client does not work.
Modification:
Make sure to submit the notification task.
Result:
The discard client works again and all listeners are notified.
Motivation:
During a large memory copy, safepoint polling is diabled, hindering
accurate profiling.
Modifications:
Only copy up to 1 MiB per Unsafe.copyMemory()
Result:
Potentially more reliable performance
Motivation:
Some users already use an SSLEngine implementation in finagle-native. It
wraps OpenSSL to get higher SSL performance. However, to take advantage
of it, finagle-native must be compiled manually, and it means we cannot
pull it in as a dependency and thus we cannot test our SslHandler
against the OpenSSL-based SSLEngine. For an instance, we had #2216.
Because the construction procedures of JDK SSLEngine and OpenSslEngine
are very different from each other, we also need to provide a universal
way to enable SSL in a Netty application.
Modifications:
- Pull netty-tcnative in as an optional dependency.
http://netty.io/wiki/forked-tomcat-native.html
- Backport NativeLibraryLoader from 4.0
- Move OpenSSL-based SSLEngine implementation into our code base.
- Copied from finagle-native; originally written by @jpinner et al.
- Overall cleanup by @trustin.
- Run all SslHandler tests with both default SSLEngine and OpenSslEngine
- Add a unified API for creating an SSL context
- SslContext allows you to create a new SSLEngine or a new SslHandler
with your PKCS#8 key and X.509 certificate chain.
- Add JdkSslContext and its subclasses
- Add OpenSslServerContext
- Add ApplicationProtocolSelector to ensure the future support for NPN
(NextProtoNego) and ALPN (Application Layer Protocol Negotiation) on
the client-side.
- Add SimpleTrustManagerFactory to help a user write a
TrustManagerFactory easily, which should be useful for those who need
to write an alternative verification mechanism. For example, we can
use it to implement an unsafe TrustManagerFactory that accepts
self-signed certificates for testing purposes.
- Add InsecureTrustManagerFactory and FingerprintTrustManager for quick
and dirty testing
- Add SelfSignedCertificate class which generates a self-signed X.509
certificate very easily.
- Update all our examples to use SslContext.newClient/ServerContext()
- SslHandler now logs the chosen cipher suite when handshake is
finished.
Result:
- Cleaner unified API for configuring an SSL client and an SSL server
regardless of its internal implementation.
- When native libraries are available, OpenSSL-based SSLEngine
implementation is selected automatically to take advantage of its
performance benefit.
- Examples take advantage of this modification and thus are cleaner.
Motivation:
The old DefaultAttributeMap impl did more synchronization then needed and also did not expose a efficient way to check if an attribute exists with a specific key.
Modifications:
* Rewrite DefaultAttributeMap to not use IdentityHashMap and synchronization on the map directly. The new impl uses a combination of AtomicReferenceArray and synchronization per chain (linked-list). Also access the first Attribute per bucket can be done without any synchronization at all and just uses atomic operations. This should fit for most use-cases pretty weel.
* Add hasAttr(...) implementation
Result:
It's now possible to check for the existence of a attribute without create one. Synchronization is per linked-list and the first entry can even be added via atomic operation.
Motivation:
At the moment there are two issues with HashedWheelTimer:
* the memory footprint of it is pretty heavy (250kb fon an empty instance)
* the way how added Timeouts are handled is inefficient in terms of how locks etc are used and so a lot of context-switching / condition can happen.
Modification:
Rewrite HashedWheelTimer to use an optimized bucket implementation to store the submitted Timeouts and a MPSC queue to handover the timeouts. So volatile writes are reduced to a minimum and also the memory foot-print of the buckets itself is reduced a lot as the bucket uses a double-linked-list. Beside this we use Atomic*FieldUpdater where-ever possible to improve the memory foot-print and performance.
Result:
Lower memory-footprint and better performance
Motivation:
Some JDK versions of Mac OS X generates a JNI dynamic library with '.jnilib' extension rather than with '.dynlib' extension. However, System.mapLibraryName() always returns 'lib<name>.dynlib'. As a result, NativeLibraryLoader fails to load the native library whose extension is .jnilib.
Modification:
Try to find both '.jnilib' and '.dynlib' resources on OS X.
Result:
Dynamic libraries are loaded correctly in Mac OS X, and thus we can continue the OpenSslEngine work.
Motivation:
So far, we used a very simple platform string such as linux64 and
linux32. However, this is far from perfection because it does not
include anything about the CPU architecture.
Also, the current build tries to put multiple versions of .so files into
a single JAR. This doesn't work very well when we have to ship for many
different platforms. Think about shipping .so/.dynlib files for both
Linux and Mac OS X.
Modification:
- Use os-maven-plugin as an extension to determine the current OS and
CPU architecture reliable at build time
- Use Maven classifier instead of trying to put all shared libraries
into a single JAR
- NativeLibraryLoader does not guess the OS and bit mode anymore and it
always looks for the same location regardless of platform, because the
Maven classifier does the job instead.
Result:
Better scalable native library deployment and retrieval
Motivation:
It is less confusing not to spread Thread.interrupt() calls.
Modification:
- Comments
- Move generatorThread.interrupt() to where currentThread.interrupt() is
triggered
Result:
Code that is easier to read
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
ThreadLocalRandomTest reveals that ThreadLocalRandom's initial seed generation loop becomes tight if the thread is interrupted.
We currently interrupt ourselves inside the wait loop, which will raise an InterruptedException again in the next iteration, resulting in infinite (up to 3 seconds) exception construction and thread interruptions.
Modification:
- When the initial seed generator thread is interrupted, break out of the wait loop immediately.
- Log properly when the initial seed generation failed due to interruption.
- When failed to generate the initial seed, interrupt the generator thread just in case the SecureRandom implementation handles it properly.
- Make the initial seed generator thread daemon and handle potential exceptions raised due to the interruption.
Result:
No more tight loop on interruption. More robust generator thread termination. Fixes#2412
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
Minor spelling/typo correction for EventExecutor's newSucceededFuture and
newFailedFuture javadocs.
Modifications:
Just correcting the spelling/typo.
Result:
Improve the javadocs.
Motivation:
Previously, we used SecureRandom.nextLong() to generate the initialSeedUniquifier. This required more entrophy than necessary because it has to 1) generate the seed of SecureRandom first and then 2) generate a random long integer. Instead, we can use generateSeed() to skip the step (2)
Modifications:
Use generateSeed() instead of nextLong()
Result:
ThreadLocalRandom requires less amount of entrphy to start up
Motivation:
As reported in #2331, some query operations in NetworkInterface takes much longer time than we expected. For example, specifying -Djava.net.preferIPv4Stack=true option in Window increases the execution time by more than 4 times. Some Windows systems have more than 20 network interfaces, and this problem gets bigger as the number of unused (virtual) NICs increases.
Modification:
Use NetworkInterface.getInetAddresses() wherever possible.
Before iterating over all NICs reported by NetworkInterface, filter the NICs without proper InetAddresses. This reduces the number of candidates quite a lot.
NetUtil does not query hardware address of NIC in the first place but uses InetAddress.isLoopbackAddress().
Do not call unnecessary query operations on NetworkInterface. Just get hardware address and compare.
Result:
Significantly reduced class initialization time, which should fix#2331.
Motivation:
6e8ba291cf introduced a regression in Android because Android does not have sun.nio.ch.DirectBuffer (see #2330.) I also found PlatformDependent0.freeDirectBuffer() and freeDirectBufferUnsafe() are pretty much same after the commit and the unsafe version should be removed.
Modifications:
- Do not use the pooled allocator in Android because it's too resource hungry for Androids.
- Merge PlatformDependent0.freeDirectBuffer() and freeDirectBufferUnsafe() into one method.
- Make the Unsafe unavailable when sun.nio.ch.DirectBuffer is unavailable. We could keep the Unsafe available and handle the sun.nio.ch.DirectBuffer case separately, but I don't want to complicate our code just because of that. All supported JDK versions have sun.nio.ch.DirectBuffer if the Unsafe is available.
Result:
Simpler code. Fixes Android support (#2330)
Motivation:
Remove the synchronization bottleneck in startThread() which is called by each execute(..) call from outside the EventLoop.
Modifications:
Replace the synchronized block with the use of AtomicInteger and compareAndSet loops.
Result:
Less conditions during SingleThreadEventExecutor.execute(...)
Motivation:
- As reported recently [1], Recycler's thread-local object pool has unbounded capacity which is a potential problem.
- It accesses a hash table on each push and pop for debugging purposes. We don't really need it besides debugging Netty itself.
Modifications:
- Introduced the maxCapacity constructor parameter to Recycler. The default default maxCapacity is retrieved from the system property whose default is 256K, which should be plenty for most cases.
- Recycler.Stack.map is now created and accessed only when assertion is enabled for Recycler.
Result:
- Recycler does not grow infinitely anymore.
- If assertion is disabled, Recycler should be much faster.
[1] https://github.com/netty/netty/issues/1841
Previously ConcurrentHashMapV8 evaulated ((x | 1) == 0), an expression
that always returned false. This commit brings Netty closer to the
Java 8 implementation.
This transport use JNI (C) to directly make use of epoll in Edge-Triggered mode for maximal performance on Linux. Beside this it also support using TCP_CORK and produce less GC then the NIO transport using JDK NIO.
It only builds on linux and skip the build if linux is not used. The transport produce a jar which contains all needed .so files for 32bit and 64 bit. The user only need to include the jar as dependency as usually
to make use of it and use the correct classes.
This includes also some cleanup of @trustin
- Fixes#2220
- Its Javadoc says it returns true when the promise is done (but not cancelled) or the promise is uncancellable, but it returns false when the promise is done.
.. which occurs when a user adds a listener from different threads after the promise is done and the notifications for the listeners, that were added before the promise is done, is in progress. For instance:
Thread-1: p.addListener(listenerA);
Thread-1: p.setSuccess(null);
Thread-2: p.addListener(listenerB);
Thread-2: p.executor.execute(taskNotifyListenerB);
Thread-1: p.executor.execute(taskNotifyListenerA);
taskNotifyListenerB should not really notify listenerB until taskNotifyListenerA is finished.
To fix this issue:
- Change the semantic of (listeners == null) to determine if the early
listeners [1] were notified
- If a late listener is added before the early listeners are notified,
the notification of the late listener is deferred until the early
listeners are notified (i.e. until listeners == null)
- The late listeners with deferred notifications are stored in a lazily
instantiated queue to preserve ordering, and then are notified once
the early listeners are notified.
[1] the listeners that were added before the promise is done
[2] the listeners that were added after the promise is done
- Related: #2163
- Add ResourceLeakHint to allow a user to provide a meaningful information about the leak when touching it
- DefaultChannelHandlerContext now implements ResourceLeakHint to tell where the message is going.
- Cleaner resource leak report by excluding noisy stack trace elements
- Remove the reference to ResourceLeak from the buffer implementations
and use wrappers instead:
- SimpleLeakAwareByteBuf and AdvancedLeakAwareByteBuf
- It is now allocator's responsibility to create a leak-aware buffer.
- Added AbstractByteBufAllocator.toLeakAwareBuffer() for easier
implementation
- Add WrappedByteBuf to reduce duplication between *LeakAwareByteBuf and
UnreleasableByteBuf
- Raise the level of leak reports to ERROR - because it will break the
app eventually
- Replace enabled/disabled property with the leak detection level
- Only print stack trace when level is ADVANCED or above to avoid user
confusion
- Add the 'leak' build profile, which enables highly detailed leak
reporting during the build
- Remove ResourceLeakException which is unsed anymore
- Fixes#2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging. This is
more robust because some strict build tools fail to retrieve the
artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
- Fixes#1912
- Add ChannelHandlerInvoker and its default implementation
- Add pipeline manipulation methods that accept ChannelHandlerInvoker
- Rename Channel(Inbound|Outbound)Invoker to
Channel(Inbound|Outbound)Ops to avoid confusion
- Remove the Javadoc references to the package-private interfaces
- Proposed fix for #1824
UniqueName and its subtypes do not allow getting the previously registered instance. For example, let's assume that a user is running his/her application in an OSGi container with Netty bundles and his server bundle. Whenever the server bundle is reloaded, the server will try to create a new AttributeKey instance with the same name. However, Netty bundles were not reloaded at all, so AttributeKey will complain that the name is taken already (by the previously loaded bundle.)
To fix this problem:
- Replaced UniqueName with Constant, AbstractConstant, and ConstantPool. Better name and better design.
- Sctp/Udt/RxtxChannelOption is not a ChannelOption anymore. They are just constant providers and ChannelOption is final now. It's because caching anything that's from outside of netty-transport will lead to ClassCastException on reload, because ChannelOption's constant pool will keep all option objects for reuse.
- Signal implements Constant because we can't ensure its uniqueness anymore by relying on the exception raised by UniqueName's constructor.
- Fixes#1765
Java 6 did a poor job of generating seedUniquifier unlike 7, so I implemented platform-independent seedUniquifier generator with configurability
