Commit Graph

1901 Commits

Author SHA1 Message Date
Nick Hill
d7fa7be67f Exploit PlatformDependent.allocateUninitializedArray() in more places (#8393)
Motivation:

There are currently many more places where this could be used which were
possibly not considered when the method was added.

If https://github.com/netty/netty/pull/8388 is included in its current
form, a number of these places could additionally make use of the same
BYTE_ARRAYS threadlocal.

There's also a couple of adjacent places where an optimistically-pooled
heap buffer is used for temp byte storage which could use the
threadlocal too in preference to allocating a temp heap bytebuf wrapper.
For example
https://github.com/netty/netty/blob/4.1/buffer/src/main/java/io/netty/buffer/ByteBufUtil.java#L1417.

Modifications:

Replace new byte[] with PlatformDependent.allocateUninitializedArray()
where appropriate; make use of ByteBufUtil.getBytes() in some places
which currently perform the equivalent logic, including avoiding copy of
backing array if possible (although would be rare).

Result:

Further potential speed-up with java9+ and appropriate compile flags.
Many of these places could be on latency-sensitive code paths.
2018-10-27 10:43:28 -05:00
Norman Maurer
a542d4d78b
Increase test timeout (#8385)
Motivation:

It has shown that the used test timeout may be too low when the CI is busy.

Modifications:

Increase timeout to 3 seconds.

Result:

Less false-positives.
2018-10-15 15:10:22 +02:00
Norman Maurer
652650b0db
Correctly decrement pending bytes when submitting AbstractWriteTask fails. (#8349)
Motivation:

Currently we may end up in the situation that we incremented the pending bytes before submitting the AbstractWriteTask but never decrement these again if the submitting of the task fails. This may result in incorrect watermark handling.

Modifications:

- Correctly decrement pending bytes if subimitting of task fails and also ensure we recycle it correctly.
- Add unit test.

Result:

Fixes https://github.com/netty/netty/issues/8343.
2018-10-11 18:46:10 +02:00
Jussi Virtanen
fc28bccdf1 Fix SelectableChannel support in NioEventLoop (#8344)
Motivation:

Unless the 'io.netty.noKeySetOptimization' system property is set,
registering a SelectableChannel instance to a NioEventLoop results
in a ClassCastException:

    io.netty.channel.nio.SelectedSelectionKeySetSelector cannot be cast
        to java.nio.channels.spi.AbstractSelector

Modifications:

Instead of 'selector', pass 'unwrappedSelector' to SelectableChannel.

Result:

It is possible to register a SelectableChannel instance without
setting the 'io.netty.noKeySetOptimization' system property.
2018-10-09 12:11:07 +08:00
Matteo Merli
3a96e7373b Added option to do busy-wait on epoll (#8267)
Motivation:

Add an option (through a SelectStrategy return code) to have the Netty event loop thread to do busy-wait on the epoll.

The reason for this change is to avoid the context switch cost that comes when the event loop thread is blocked on the epoll_wait() call.

On average, the context switch has a penalty of ~13usec.

This benefits both:

The latency when reading from a socket
Scheduling tasks to be executed on the event loop thread.
The tradeoff, when enabling this feature, is that the event loop thread will be using 100% cpu, even when inactive.

Modification:

Added SelectStrategy option to return BUSY_WAIT
Epoll loop will do a epoll_wait() with no timeout
Use pause instruction to hint to processor that we're in a busy loop
Result:

When enabled, minimizes impact of context switch in the critical path
2018-09-28 22:52:00 +02:00
root
2d7cb47edd [maven-release-plugin] prepare for next development iteration 2018-09-27 19:00:45 +00:00
root
3a9ac829d5 [maven-release-plugin] prepare release netty-4.1.30.Final 2018-09-27 18:56:12 +00:00
Norman Maurer
3c2dbdb5db
NioEventLoop should also use our special SelectionKeySet on Java9 and later. (#8260)
Motivation:

In Java8 and earlier we used reflection to replace the used key set if not otherwise told. This does not work on Java9 and later without special flags as its not possible to call setAccessible(true) on the Field anymore.

Modifications:

- Use Unsafe to instrument the Selector with out special set when sun.misc.Unsafe is present and we are using Java9+.

Result:

NIO transport produce less GC on Java9 and later as well.
2018-09-05 07:23:03 +02:00
Norman Maurer
c74b3f3a3b Correctly implement SelectedSelectionKeySet.Iterator remove()
Motivation:

We need to implement remove() by ourselves to make it work on Java7 as otherwise it will throw an AbstractMethodError. This is a followup of c1a335446d.

Modifications:

Just implemented remove()

Result:

Works on Java7 as well.
2018-09-01 08:59:08 +02:00
Norman Maurer
187b1b8a55 Correctly implement SelectedSelectionKeySet.remove(...) / contains(...) again so it works with the NIO Selector.
Motivation:

c1a335446d reimplemented remove(...) and contains(...) in a way which made it not work anymore when used by the Selector.

Modifications:

Partly revert changes in c1a335446d.

Result:

Works again as expected
2018-09-01 08:43:50 +02:00
Norman Maurer
c1a335446d
Correctly implement SelectedSelectionKeySet iterator(), contains(...) and remove(...) (#8244)
Motivation:

Our SelectedSelectionKeySet does not correctly implement various methods which can be done without any performance overhead.

Modifications:

Implement iterator(), contains(...) and remove(...)

Result:

Related to https://github.com/netty/netty/issues/8242.
2018-09-01 08:10:02 +02:00
Norman Maurer
1bd9e662dd
Clarify deprecation docs a bit. (#8226)
Motivation:

It seems to sometimes confuse people what to do to replace setMaxMessagePerRead(...).

Modifications:

Add some more details to the javadocs about the correct replacement.

Result:

Related to https://github.com/netty/netty/issues/8214.
2018-08-25 08:14:38 +02:00
root
a580dc7585 [maven-release-plugin] prepare for next development iteration 2018-08-24 06:36:33 +00:00
root
3fc789e83f [maven-release-plugin] prepare release netty-4.1.29.Final 2018-08-24 06:36:06 +00:00
Ziyan Mo
785473788f (Nio|Epoll)EventLoop.pendingTasks does not need to dispatch to the EventLoop (#8197)
Motivation:

EventLoop.pendingTasks should be (reasonably) cheap to invoke so it can be used within observability. 

Modifications:

Remove code that dispatch access to the internal taskqueue to the EventLoop when invoked as this is not needed anymore with the current MPSC queues we are using. 

See https://github.com/netty/netty/issues/8196#issuecomment-413653286.

Result:

Fixes https://github.com/netty/netty/issues/8196
2018-08-18 07:28:31 +02:00
Norman Maurer
bd25fd03e3
Add testcase for ChannelInitializer.initChannel(...) when throwing an Exception (#8188)
Motivation:

We had a report that the exception may not be correctly propagated. This test shows it is.

Modifications:

Add testcase.

Result:

Test for https://github.com/netty/netty/issues/8158
2018-08-10 08:54:21 +02:00
Norman Maurer
534de73d28
Workaround JDK bug that will cause an AssertionError when calling ServerSocketChannel.config().getOptions(). (#8183)
Motivation:

There is a JDK bug which will return IP_TOS as supported option for ServerSocketChannel even if its not supported afterwards and cause an AssertionError.
See http://mail.openjdk.java.net/pipermail/nio-dev/2018-August/005365.html.

Modifications:

Add a workaround for the JDK bug.

Result:

ServerSocketChannel.config().getOptions() will not throw anymore and work as expected.
2018-08-09 13:11:08 +02:00
Norman Maurer
2c13f71c73
Ensure NIO transport can be used on Java6 again. (#8168)
Motivation:

952eeb8e1e introduced the possibility to use any JDK SocketOption when using the NIO transport but broke the possibility to use netty with java6.

Modifications:

Do not use java7 types in method signatures of the static methods in NioChannelOption to prevent class-loader issues on java6.

Result:

Fixes https://github.com/netty/netty/issues/8166.
2018-08-03 07:07:09 +02:00
root
fcb19cb589 [maven-release-plugin] prepare for next development iteration 2018-07-27 04:59:28 +00:00
root
ff785fbe39 [maven-release-plugin] prepare release netty-4.1.28.Final 2018-07-27 04:59:06 +00:00
Norman Maurer
952eeb8e1e
Support the usage of SocketOption when nio is used and the java versi… (#8085)
* Support the usage of SocketOption when nio is used and the java version >= 7.

Motivation:

The JDK uses SocketOption since java7 to support configuration options on the underyling Channel. We should allow to create a ChannelOption from a given SocketOption if nio is used. This also allows us to expose the same featureset in terms of configuration as the java nio implementation does without any extra effort.

Modifications:

- Add NioChannelOption which allows to wrap an existing SocketOption which then can be applied to the nio transport.
- Add test-cases

Result:

Support the same configuration options as the JDK. Also fixes https://github.com/netty/netty/issues/8072.
2018-07-25 12:32:28 +08:00
root
b4dbdc2036 [maven-release-plugin] prepare for next development iteration 2018-07-11 15:37:40 +00:00
root
1c16519ac8 [maven-release-plugin] prepare release netty-4.1.27.Final 2018-07-11 15:37:21 +00:00
Norman Maurer
301e22eafb
Fix incorrect code in javadocs of ChannelHandler. (#8115)
Motivation:

Some code that was shown as part of the ChannelHandler javadoc was not 100 % correct and used some constructs that we used in netty 3. Also we never called flush() in the code which is a bad example for users.

Modifications:

- Remove netty 3 code references
- Replace channel.write(...) with ctx.writeAndFlush(...)

Result:

More correct code in the javadocs.
2018-07-11 10:19:20 +01:00
时无两丶
cf713d0368 Remove extra 'should' word in docs of continueReading() method 2018-07-11 10:19:03 +01:00
root
7bb9e7eafe [maven-release-plugin] prepare for next development iteration 2018-07-10 05:21:24 +00:00
root
8ca5421bd2 [maven-release-plugin] prepare release netty-4.1.26.Final 2018-07-10 05:18:13 +00:00
Bennett Lynch
253522fc91 Create SimpleUserEventChannelHandler convenience class (#7991)
Motivation:

Currently, the vast majority of userEventTriggered() implementations
require the user to supply the boilerplate behavior of performing an
instanceof check, handling if appropriate, and calling
fireUserEventTriggered() otherwise.

We can simplify this very common use case by creating a class that only
matches user events of a given type, similar to the existing
SimpleChannelInboundHandler class.

Modifications:

Create a new SimpleUserEventChannelHandler class
Create accompanying SimpleUserEventChannelHandlerTest class

Result:

Users will be able to handle most events in a less verbose manner.
2018-06-29 08:25:23 +02:00
Norman Maurer
83710cb2e1
Replace toArray(new T[size]) with toArray(new T[0]) to eliminate zero-out and allow the VM to optimize. (#8075)
Motivation:

Using toArray(new T[0]) is usually the faster aproach these days. We should use it.

See also https://shipilev.net/blog/2016/arrays-wisdom-ancients/#_conclusion.

Modifications:

Replace toArray(new T[size]) with toArray(new T[0]).

Result:

Faster code.
2018-06-29 07:56:04 +02:00
Tyler Rockwood
34b25dc94c Expose channel count for FixedChannelPool (#8059)
Motivation:

We use FixedChannelPool in production, and we believe we have a leak that doesn't return sockets to the pool (but they should be closed), thus blocking us from creating new connections when we need them. I haven't confirmed this yet, but right now I have to resort to reflection to access this field which makes me sad.

Modification:

Expose the acquiredChannelCount field through a getter method.

Result:

Allows introspection of the pool size in FixedChannelPool.
2018-06-28 08:12:26 +02:00
radai-rosenblatt
b1d4b2af1c fix grammar in javadoc
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
2018-06-20 10:45:49 +02:00
Roger
3e3e5155b9 Check if Log level is enabled before creating log statements (#8022)
Motivation

There is a cost to concatenating strings and calling methods that will be wasted if the Logger's level is not enabled.

Modifications

Check if Log level is enabled before producing log statement. These are just a few cases found by RegEx'ing in the code.

Result

Tiny bit more efficient code.
2018-06-13 23:21:53 -07:00
时无两丶
b53cf045a7 SelectedSelectionKeySet should only be created if the set can be instrumented
Motivation:

If we can not replace the internal used Set of the Selector there is no need to create an SelectedSelectionKeySet instance.

Modification:

Only create SelectedSelectionKeySet if we will replace the internal set.

Result:

Less object creation in some cases and cleaner code.
2018-05-30 15:33:39 +02:00
Norman Maurer
d133bf06a4
Allow to schedule tasks up to Long.MAX_VALUE (#7972)
Motivation:

We should allow to schedule tasks with a delay up to Long.MAX_VALUE as we did pre 4.1.25.Final.

Modifications:

Just ensure we not overflow and put the correct max limits in place when schedule a timer. At worse we will get a wakeup to early and then schedule a new timeout.

Result:

Fixes https://github.com/netty/netty/issues/7970.
2018-05-30 11:11:42 +02:00
Norman Maurer
c3637ff42c
AUTO_CLOSE should not be marked as deprecated. (#7967)
Motivation:

A long time ago we deprecated AUTO_CLOSE but it turned out this feature is still useful because if a write error is detected there still maybe data to read, and if we close the channel automatically we will lose data

Modifications:

- Remove `@Deprecated` tag for AUTO_CLOSE, setAutoClose(...) and isAutoClose(...)
- Fix javadocs on ChannelConfig to correctly tell the default value of AUTO_CLOSE.

Result:

Less warnings.
2018-05-24 21:25:30 +02:00
Norman Maurer
583fc272f2
Fixed|SimpleChannelPool.close() should only return after complete. (#7927)
Motivation:

We need to ensure we only return from close() after all work is done as otherwise we may close the EventExecutor before we dispatched everything.

Modifications:

Correctly wait on operations to complete before return.

Result:

Fixes https://github.com/netty/netty/issues/7901.
2018-05-21 19:22:31 +02:00
Norman Maurer
64bb279f47 [maven-release-plugin] prepare for next development iteration 2018-05-14 11:11:45 +00:00
Norman Maurer
c67a3b0507 [maven-release-plugin] prepare release netty-4.1.25.Final 2018-05-14 11:11:24 +00:00
Norman Maurer
cbe9ed8cc1
Add test that we handle thread.interrupt() in NioEventLoop (#7917)
Motivation:

We added some code to guard against thread.interrupt() in NioEventLoop but did not added a test.

Modifications:

Add testcase.

Result:

Verify that we correctly handle interrupt().
2018-05-09 08:57:53 +02:00
Konstantin Lutovich
437849bd93 Fix tiny typo in FixedChannelPool error message (#7918)
Motivation:

Closed `FixedChannelPool` fails acquire and release operations with
`IllegalStateException`s. These exceptions had message
"FixedChannelPooled was closed". Here "FixedChannelPooled" looks like
a typo and should probably be "FixedChannelPool".

Modifications:

Changed exception message to "FixedChannelPool was closed".

Result:

A tiny bit cleaner exception message.
2018-05-08 15:58:23 +02:00
Norman Maurer
095dadcbec
Fix race in ChannelReadHandler used during LocalChannel testing. (#7904)
Motivation:

ChannelReadHandler is used in tests added via f4d7e8de14. In the handler we verify the number of messages we receive per read() call but missed to sometimes reset the counter which resulted in exceptions.

Modifications:

Correctly reset read counter in all cases.

Result:

No more unexpected exceptions when running LocalChannel tests.
2018-05-04 07:36:33 +02:00
Norman Maurer
f4d7e8de14
Respect MAX_MESSAGES_PER_READ in LocalChannel / LocalServerChannel. (#7885)
Motivation:

LocalChannel / LocalServerChannel did not respect read limits and just always read all of the messages.

Modifications:

- Correct respect MAX_MESSAGES_PER_READ settings
- Add unit tests

Result:

Fixes https://github.com/netty/netty/issues/7880.
2018-04-26 07:58:56 +02:00
Norman Maurer
b47fb81799
EventLoop.schedule with big delay fails (#7402)
Motivation:

Using a very huge delay when calling schedule(...) may cause an Selector error when calling select(...) later on. We should gaurd against such a big value.

Modifications:

- Add guard against a very huge value.
- Added tests.

Result:

Fixes [#7365]
2018-04-24 11:15:20 +02:00
Norman Maurer
b75f44db9a [maven-release-plugin] prepare for next development iteration 2018-04-19 11:56:07 +00:00
Norman Maurer
04fac00c8c [maven-release-plugin] prepare release netty-4.1.24.Final 2018-04-19 11:55:47 +00:00
Norman Maurer
0f34d887b7
Only reset readIsPending if outboundBuffer is not empty. (#7874)
Motivation:

We need to ensure we only reset readInProgress if the outboundBuffer is not empty as otherwise we may miss to call fireChannelRead(...) later on when using the LocalChannel.

Modifications:

Also check if the outboundBuffer is not empty before setting readInProgress to false again

Result:

Fixes https://github.com/netty/netty/issues/7855
2018-04-19 09:39:16 +02:00
Nikolay Fedorovskikh
401b196623 Extract common parts from if statements (#7831)
Motivation:
Some `if` statements contains common parts that can be extracted.

Modifications:
Extract common parts from `if` statements.

Result:
Less code and bytecode. The code is simpler and more clear.
2018-04-11 14:36:56 +02:00
root
0a61f055f5 [maven-release-plugin] prepare for next development iteration 2018-04-04 10:44:46 +00:00
root
8c549bad38 [maven-release-plugin] prepare release netty-4.1.23.Final 2018-04-04 10:44:15 +00:00
Scott Mitchell
ed0668384b NIO read spin event loop spin when half closed (#7801)
Motivation:
AbstractNioByteChannel will detect that the remote end of the socket has
been closed and propagate a user event through the pipeline. However if
the user has auto read on, or calls read again, we may propagate the
same user events again. If the underlying transport continuously
notifies us that there is read activity this will happen in a spin loop
which consumes unnecessary CPU.

Modifications:
- AbstractNioByteChannel's unsafe read() should check if the input side
of the socket has been shutdown before processing the event. This is
consistent with EPOLL and KQUEUE transports.
- add unit test with @normanmaurer's help, and make transports consistent with respect to user events

Result:
No more read spin loop in NIO when the channel is half closed.
2018-03-28 20:02:57 +02:00