Motivation:
For every write of a flow controlled frame (HEADERS, DATA) we are allocating
a Frame object that is not necessary anymore as it does not maintain any
state, besides the payload.
Modifications:
Remove the Frame class and directly add the payload to the pending write queue.
Result:
One few object allocation per write of a flow controlled frame.
Motivation:
The logger was always performing a hex dump of the ByteBufs regarless whether or not the log would take place.
Modifications:
Fixed the logger to avoid serializing the ByteBufs and calling the varargs method if logging is not enabled.
Result:
The loggers should run MUCH faster when disabled.
Motivation:
If HEADERS or DATA frames are pending due to a too small flow control
window, a frame with the END_STREAM flag set will wrongfully cancel
all pending frames (including itself).
Also see grpc/grpc-java#145
Modifications:
The transition of the stream state to CLOSE / HALF_CLOSE due to a
set END_STREAM flag is delayed until the frame with the flag is
actually written to the Channel.
Result:
Flow control works correctly. Frames with END_STREAM flag will no
longer cancel their preceding frames.
Motivation:
HttpToHttp2ConnectionHandlerTest was accidentally modified with a
debugging value for WAIT_TIME_SECONDS.
Modifications:
Reverted the change.
Result:
original wait time restored.
Motivation:
The Http2DefaultFrameWriter copies all contents into a buffer (or uses a CompositeBuffer in 1 case) and then writes that buffer to the socket. There is an opportunity to avoid the copy operations and write directly to the socket.
Modifications:
- Http2DefaultFrameWriter should avoid copy operations where possible.
- The Http2FrameWriter interface should be clarified to indicate that ByteBuf objects will be released.
Result:
Hopefully less allocation/copy leads to memory and throughput performance benefit.
Motivation:
Http2Stream has several methods that provide state information. We need
to simplify how state is used and consolidate as many of these fields as
possible.
Modifications:
Since we already have a concept of a stream being active or inactive,
I'm now separating the deactivation of a stream from the act of closing
it. The reason for this is the case of sending a frame with
endOfStream=true. In this case we want to close the stream immediately
in order to disallow further writing, but we don't want to mark the
stream as inactive until the write has completed since the inactive
event triggers the flow controller to cancel any pending writes on the
stream.
With deactivation separated out, we are able to eliminate most of the
additional state methods with the exception of `isResetSent`. This is
still required because we need to ignore inbound frames in this case (as
per the spec), since the remote endpoint may not yet know that the
stream has been closed.
Result:
Fixes#3382
Motivation:
Previously flow-controller had to know the implementation details of each frame type in order to write it correctly. That concern is more correctly handled by the encoder. By encapsulating the payload types to be flow-controlled it will be easier to add support for extension types later. This change also fixes#3353.
Modifications:
Add interface FlowControlled which is now delivered to flow-controller.
Implement this interface for HEADERS and DATA
Refactor and improve tests for flow-control.
Result:
Flow control semantics are more cleanly separated for data encoding and implementation is simpler overall.
Motivation:
A downstream consumer of Netty failed as emitting zero-length http2 data frames in a unit test resulted in assertion errors in Http2LocalFlowController. Since zero-length frames are valid, an assertion that http2 data frame length must be positive is invalid.
Modifications:
Assertions of data length in Http2LocalFlowController now permit zero.
Result:
Those running netty with assertions on can now emit zero length http2 data frames.
Motivation:
Commit eb0e127ee9 was designed for the 4.1 branch. The 5.0 branch had a few additional classes which required updates to get the new timeMillis methods for all the header classes.
Modifications:
Update the *Headers interfaces/classes that were not updated in the 4.1 branch.
Result:
All *Headers interfaces support set/add timeMillis methods.
Motivation:
HttpToHttp2ConnectionHandler is awaiting on a future and a latch that may be competed before the buffers actually get released. This test is attempting to validate that the buffer's refCnt() is 0 but there is no mechanism to wait on for a buffer's release() method to be called.
Modifications:
Remove the buffer refCnt() check. The leak profile is designed to pick these up.
Result:
Unit tests that no longer have a race condition.
Motivation:
The stress tests have been observed to fail on the CI server. The average run time of the stress tests has recently been 26+ seconds. Our timeout is currently set to 30 seconds.
Modifications:
Increase the timeout for the stress test so when the leak profile is active we will have more time to complete the test (with the additional overhead).
Result:
Stress tests fail less frequently (hopefully not at all).
Motivation:
Clinker provides a Sonar tool which detects potential bugs or problems in the code. These problems were reported here http://clinker.netty.io/sonar/drilldown/issues/io.netty:netty-parent:master?
Modifications:
Make the recommended changes as reported by Sonar
Result:
Better or more standard code. Less Sonar problem reports for HTTP/2 codec.
Motivation:
The Http2ConnectionRoundtripTest.noMoreStreamIdsShouldSendGoAway unit test had a race condition where it would sometimes receive a SETINGS_ACK message that was not anticipated. This caused the test to fail because of bad test code.
Modifications:
The bad unit test should be updated to handle the message exchange for a good connection setup, and then the GO_AWAY frame.
Result:
Http2ConnectionRoundtripTest.noMoreStreamIdsShouldSendGoAway should no longer sporadically fail.
Motivation:
The terminology used with inbound/outbound is a little confusing since
it's not discussed in the spec. We should switch to using local/remote
instead. Also there is some asymmetry between the inbound/outbound
interfaces which could probably be cleaned up.
Modifications:
Changing the interface names and making a common Http2FlowController
interface for most of the methods.
Result:
The HTTP/2 flow control interfaces should be more clear.
Motivation:
The inbound flow control code was returning too many bytes to the connection window. This was resulting in GO_AWAYs being generated by peers with the error code indicating a flow control issue. Bytes were being returned to the connection window before the call to returnProcessedBytes. All of the state representing the connection window was not updated when a local settings event occurred.
Modifications:
The DefaultHttp2InboundFlowController will be updated to correct the above defects.
The unit tests will be updated to reflect the changes.
Result:
Inbound flow control algorithm does not cause peers to send flow control errors for the above mentioned cases.
Motivation:
We use 3 (!) libraries to build mock objects - easymock, mockito, jmock.
Mockito and jMock pulls in the different versions of Hamcrest, and it
conflicts with the version pulled by jUnit.
Modifications:
- Replace mockito-all with mockito-core to avoid pulling in outdated
jUnit and Hamcrest
- Exclude junit-dep when pulling in jmock-junit4, because it pulls an
outdated Hamcrest version
- Pull in the hamcrest-library version used by jUnit explicitly
Result:
No more dependency hell that results in NoSuchMethodError during the
tests
Motivation:
The Http2SecurityUtil class lists a few ciphers that are explicitly prohibited by the HTTP/2 specification because of their characteristics.
Modifications:
Remove the ciphers that are prohibited.
Results:
Cipher suite used for HTTP/2 codec is compatible with HTTP/2 spec.
Motivation:
The DefaultHttp2FrameWriter has an exception generated but is missing the throw keyword.
Modifications:
Insert the missing throw keyword.
Result:
Exception thrown when it was intended to be thrown.
Motivation:
The DefaultHttp2InboundFlowController uses processedBytes to determine
when to send the WINDOW_UPDATE, but uses window to determine the delta
to send in the request. This is incorrect since we shouldn't be
requesting bytes that haven't been processed.
Modifications:
Changed DefaultHttp2InboundFlowController to use processedBytes in the
calculation of the delta to send in the WINDOW_UPDATE request.
Result:
Inbound flow control only asks for bytes that have been processed in
WINDOW_UPDATE.
Related: #3157
Motivation:
It should be convenient to have an easy way to classify an
HttpResponseStatus based on the first digit of the HTTP status code, as
defined in the RFC 2616:
- Information 1xx
- Success 2xx
- Redirection 3xx
- Client Error 4xx
- Server Error 5xx
Modification:
- Add HttpStatusClass
- Add HttpResponseStatus.codeClass() that returns the class of the HTTP
status code
- Remove HttpResponseStatus.isInformational()
Result:
It's easier to determine the class of an HTTP status
Motivation:
The HTTP/2 compressor does not release the input buffer when compression is done. This results in buffer leaks.
Modifications:
- Release the buffer in the HTTP/2 compressor
- Update tests to reflect the correct state
Result:
1 less buffer leak.
Motivation:
The interface for HTTP/2 onDataRead states that buffers will be released by the codec. The decompressor and compressor methods are not releasing buffers created during the decompression/compression process.
Modifications:
After onDataRead calls the decompressor and compressor classes will release the data buffer.
Result:
HTTP/2 compressor/decompressors are consistent with onDataRead interface assumptions.
Motivation:
Some of the comments in HTTP/2 Frame Listener interface are misleading.
Modifications:
Clarify comments in Http2FrameListener.
Result:
Http2FrameListener onDataRead comments are clarified.
Motivation:
When DefaultHttp2FrameReader has read a settings frame, the settings
will be passed along the pipeline. This allows a client to hold off
sending data until it has received a settings frame. But for a server it
will always have received a settings frame and the usefulness of this
forwarding of settings is less useful. This also causes a debug message
to be logged on the server side if there is no channel handler to handle
the settings:
[nioEventLoopGroup-1-1] DEBUG io.netty.channel.DefaultChannelPipeline -
Discarded inbound message {INITIAL_WINDOW_SIZE=131072,
MAX_FRAME_SIZE=16384} that reached at the tail of the pipeline. Please
check your pipeline configuration.
Modifications:
Added a builder for the InboundHttp2ToHttpAdapter and
InboundHttp2PriortyAdapter and a new parameter named 'propagateSettings'
to their constructors.
Result:
It is now possible to control whether settings should be passed along
the pipeline or not.
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
The HTTP/2 codec currently does not expose the boundaries of the initial settings. This could be useful for applications to define their own initial settings.
Modifications:
Add new static final variables to Http2CodecUtil and make Http2Settings use these in the bounds checks.
Result:
Applications can use the max (or min) variables to initialize their settings.
Motivation:
When the inbound flow controller recognizes that the flow control window
has been violated on a stream (not connection-wide), it throws a
connection error.
Modifications:
Changed the DefaultHttp2InboundFlowController to properly throw
connection error if the connection window is violated and stream error
if a stream window is violated.
Result:
inbound flow control throws the correct error for window violations.
Motivation:
The current name of the class which converts from HTTP objects to HTTP/2 frames contains the text Http2ToHttp. This is misleading and opposite of what is being done.
Modifications:
Rename this class name to be HttpToHttp2.
Result:
Class names that more clearly identify what they do.
Motivation:
The current decompression frame listener currently opts-out of application level flow control. The application should still be able to control flow control even if decompression is in use.
Modifications:
- DecompressorFrameListener will maintain how many compressed bytes, decompressed bytes, and processed by the listener bytes. A ratio will be used to translate these values into application level flow control amount.
Result:
HTTP/2 decompressor delegates the application level flow control to the listener processing the decompressed data.
Motivation:
Currently when an exception occurs during a listener.onDataRead
callback, we return all bytes as processed. However, the listener may
choose to return bytes via the InboundFlowState object rather than
returning the integer. If the listener returns a few bytes and then
throws, we will attempt to return too many bytes.
Modifications:
Added InboundFlowState.unProcessedBytes() to indicate how many
unprocessed bytes are outstanding.
Updated DefaultHttp2ConnectionDecoder to compare the unprocessed bytes
before and after the listener.onDataRead callback when an exception was
encountered. If there is a difference, it is subtracted off the total
processed bytes to be returned to the flow controller.
Result:
HTTP/2 data frame delivery properly accounts for processed bytes through
an exception.
Motivation:
The current priority algorithm uses 2 different mechanisms to iterate the priority tree and send the results of the allocation. The current algorithm also uses a two step phase where the priority tree is traversed and allocation amounts are calculated and then all active streams are traversed to send for any streams that may or may not have been allocated bytes.
Modifications:
- DefaultHttp2OutboundFlowController will allocate and send (when possible) in the same looping structure.
- The recursive method will send only for the children instead of itself and its children which should simplify the recursion.
Result:
Hopefully simplified recursive algorithm where the tree iteration determines who needs to send and less iteration after the recursive calls complete.
Currently the DefaultHttp2InboundFlowController only supports the
ability to turn on and off "window maintenance" for a stream. This is
insufficient for true application-level flow control that may only want
to return a few bytes to flow control at a time.
Modifications:
Removing "window maintenance" interface from
DefaultHttp2InboundFlowController in favor of the new interface.
Created the Http2InboundFlowState interface which extends Http2FlowState
to add the ability to return bytes for a specific stream.
Changed the onDataRead method to return an integer number of bytes that
will be immediately returned to flow control, to support use cases that
want to opt-out of application-level inbound flow control.
Updated DefaultHttp2InboundFlowController to use 2 windows per stream.
The first, "window", is the actual flow control window that is
decremented as soon as data is received. The second "processedWindow"
is a delayed view of "window" that is only decremented after the
application returns the processed bytes. It is processedWindow that is
used when determining when to send a WINDOW_UPDATE to restore part of
the inbound flow control window for the stream/connection.
Result:
The HTTP/2 inbound flow control interfaces support application-level
flow control.
Motivation:
Too many warnings from IntelliJ IDEA code inspector, PMD and FindBugs.
Modifications:
- Removed unnecessary casts, braces, modifiers, imports, throws on methods, etc.
- Added static modifiers where it is possible.
- Fixed incorrect links in javadoc.
Result:
Better code.
Motivation:
The outbound flow controller logic does not properly reset the allocated
bytes between successive invocations of the priority algorithm.
Modifications:
Updated the priority algorithm to reset the allocated bytes for each
stream.
Result:
Each call to the priority algorithm now starts with zero allocated bytes
for each stream.
Motivation:
I came across an issue when I was adding/setting headers and mistakenly
used an upper case header name. When using the http2 example that ships
with Netty this was not an issue. But when working with a browser that
supports http2, in my case I was using Firefox Nightly, I'm guessing
that it interprets the response as invalid in accordance with the
specifiction
https://tools.ietf.org/html/draft-ietf-httpbis-http2-14#section-8.1.2
"However, header field names MUST be converted to lowercase prior
to their encoding in HTTP/2. A request or response containing
uppercase header field names MUST be treated as malformed"
This PR suggests converting to lowercase to be the default.
Modifications:
Added a no-args constructor that defaults to forcing the key/name to
lowercase, and providing a second constructor to override this behaviour
if desired.
Result:
It is now possible to specify a header like this:
Http2Headers headers = new DefaultHttp2Headers(true)
.status(new AsciiString("200"))
.set(new AsciiString("Testing-Uppercase"), new AsciiString("some value"));
And the header written to the client will then become:
testing-uppercase:"some value"
Motivation:
The HTTP/2 codec currently does not provide an interface to compress data. There is an analogous case to this in the HTTP codec and it is expected to be used commonly enough that it will be beneficial to have the feature in the http2-codec.
Modifications:
- Add a class which extends DefaultHttp2ConnectionEncoder and provides hooks to an EmbeddedChannel
- Add a compressor element to the Http2Stream interface
- Update unit tests to utilize the new feature
Result:
HTTP/2 codec supports data compression.
Motivation:
The current logic in DefaultHttp2OutboundFlowController for handling the
case of a stream shutdown results in a Http2Exception (not a
Http2StreamException). This results in a GO_AWAY being sent for what
really could just be a stream-specific error.
Modifications:
Modified DefaultHttp2OutboundFlowController to set a stream exception
rather than a connection-wide exception. Also using the error code of
INTERNAL_ERROR rather than STREAM_CLOSED, since it's more appropriate
for this case.
Result:
Should not be triggering GO_AWAY when a stream closes prematurely.
Motivation:
Currently due to flow control, HEADERS frames can be written
out-of-order WRT DATA frames.
Modifications:
When data is written, we preserve the future as the lastWriteFuture in
the outbound flow controller. The encoder then uses the lastWriteFuture
such that headers are only written after the lastWriteFuture completes.
Result:
HEADERS/DATA write order is correctly preserved.
Motivation:
The HTTP/2 specification indicates that when converting from HTTP/2 to HTTP/1.x and non-ascii characters are detected that an error should be thrown.
Modifications:
- The ASCII validation is already done but the exception that is raised is not properly converted to a RST_STREAM error.
Result:
- If HTTP/2 to HTTP/1.x translation layer is in use and a non-ascii header is received then a RST_STREAM frame should be sent in response.
Motivation:
The DefaultOutboundFlowController was attempting to write frames with a negative length. This resulted in attempting to allocate a buffer of negative size and thus an exception.
Modifications:
- Don't allow DefaultOutboundFlowController to write negative length buffers.
Result:
No more negative length writes which resulted in IllegalArgumentExceptions.
Motivation:
x-gzip and x-deflate are not standard header values, and thus should be
removed from HttpHeaderValues, which is meant to provide the standard
values only.
Modifications:
- Remove X_DEFLATE and X_GZIP from HttpHeaderValues
- Move X_DEFLATE and X_GZIP to HttpContentDecompressor and
DelegatingDecompressorFrameListener
- We have slight code duplication here, but it does less harm than
having non-standard constant.
Result:
HttpHeaderValues contains only standard header values.
Related: 4ce994dd4f
Motivation:
In 4.1, we were not able to change the type of the HTTP header name and
value constants from String to AsciiString due to backward compatibility
reasons.
Instead of breaking backward compatibility in 4.1, we introduced new
types called HttpHeaderNames and HttpHeaderValues which provides the
AsciiString version of the constants, and then deprecated
HttpHeaders.Names/Values.
We should make the same changes while deleting the deprecated classes
activaly.
Modifications:
- Remove HttpHeaders.Names/Values and RtspHeaders
- Add HttpHeaderNames/Values and RtspHeaderNames/Values
- Make HttpHeaderValues.WEBSOCKET lowercased because it's actually
lowercased in all WebSocket versions but the oldest one
- Do not use AsciiString.equalsIgnoreCase(CharSeq, CharSeq) if one of
the parameters are AsciiString
- Avoid using AsciiString.toString() repetitively
- Change the parameter type of some methods from String to
CharSequence
Result:
A user who upgraded from 4.0 to 4.1 first and removed the references to
the deprecated classes and methods can easily upgrade from 4.1 to 5.0.
Motivation:
If the http2 encoder has exhausted all available stream IDs a GOAWAY frame is not sent. Once the encoder detects the a new stream ID has rolled over past the last stream ID a GOAWAY should be sent as recommended in section [5.1.1](https://tools.ietf.org/html/draft-ietf-httpbis-http2-14#section-5.1.1).
Modifications:
-This condition is already detected but it just needs to result in a GOAWAY being sent.
-Add a subclass of Http2Exception so the encoder can detect this special case.
-Add a unit test which checks that the GOAWAY is sent/received.
Result:
Encoder attempting to use the first 'rolled over' stream id results in a GOAWAY being sent.
Motivation:
- There are still various inspector warnings to fix.
- ValueConverter.convert() methods need to end with the type name like
other methods in Headers, such as setInt() and addInt(), for more
consistency
Modifications:
- Fix all inspector warnings
- Rename ValueConverter.convert() to convert<type>()
Result:
- Cleaner code
- Consistency
Motivation:
Headers within netty do not cleanly share a common class hierarchy. As a result some header types support some operations
and don't support others. The consolidation of the class hierarchy will allow for maintenance and scalability for new codec.
The existing hierarchy also has a few short comings such as it is not clear when data conversions are happening. This
could result unintentionally getting back a collection or iterator where a conversion on each entry must happen.
The current headers algorithm also prepends all elements which means to find the first element or return a collection
in insertion order often requires a complete traversal followed by a collections.reverse call.
Modifications:
-Provide a generic base class which provides all the implementation for headers in netty
-Provide an extension to this class which allows for name type conversions to happen (to accommodate legacy CharSequence to String conversions)
-Update the headers interface to clarify when conversions will happen.
-Update the headers data structure so that appends are done to avoid unnecessary iteration or collection reversal.
Result:
-More unified class hierarchy for headers in netty
-Improved headers data structure and algorithms
-headers API more clearly identify when conversions are required.
