Motivation:
Adding an example that showcases Netty’s HTTP/2 codec and that is
slightly more complex than the existing hello-world example. It is
based on the Gopher tiles example available here:
https://http2.golang.org/gophertiles?latency=0
Modifications:
Moved current http2 example to http2/helloworld.
Added http2 tiles example under http2/tiles.
Result:
A Netty tiles example is available.
Motiviation:
Interface changes between master and 4.1 branch resulted in a compile failure.
Modifications:
- change messageReceived to channelRead0
Result:
No more compile error.
Motiviation:
The HTTP/2 server example just hangs when a client is using only HTTP with no ALPN or upgrade attempts. We should still send some kind of response.
Modifications:
The HTTP/2 server example has a special handler to detect no upgrade HTTP clients and generate a response.
Result:
Clients that just use HTTP with no upgrade will no appear hung when interacting with the HTTP/2 server example.
Motivation:
Examples that are using ALPN/NPN are using a failure mode which is not supported by the JDK SslProvider. The examples fail to run and throw an exception if the JDK SslProvider is used.
Modifications:
- Use SelectorFailureBehavior.NO_ADVERTISE
- Use SelectedListenerFailureBehavior.ACCEPT
Result:
Examples can be run with both OpenSsl and JDK SslProviders.
Motivation:
Using factory methods of SslContext is deprecated. Code should be using
SslContextBuilder instead. This would have been done when the old
methods were deprecated, but memcache and http2 examples didn't exist in
the 4.0 branch which the PR was against.
Modifications:
Swap to the new construction pattern.
Result:
No more deprecated warnings during build of examples. Users are
instructed to use the new pattern.
RFC6265 specifies which characters are allowed in a cookie name and value.
Netty is currently too lax, which can used for HttpOnly escaping.
Modification:
In ServerCookieDecoder: discard cookie key-value pairs that contain invalid characters.
In ClientCookieEncoder: throw an exception when trying to encode cookies with invalid characters.
Result:
The problem described in the motivation section is fixed.
Motivation:
The usage and code within AsciiString has exceeded the original design scope for this class. Its usage as a binary string is confusing and on the verge of violating interface assumptions in some spots.
Modifications:
- ByteString will be created as a base class to AsciiString. All of the generic byte handling processing will live in ByteString and all the special character encoding will live in AsciiString.
Results:
The AsciiString interface will be clarified. Users of AsciiString can now be clear of the limitations the class imposes while users of the ByteString class don't have to live with those limitations.
Motivation:
SslContext factory methods have gotten out of control; it's past time to
swap to a builder.
Modifications:
New Builder class. The existing factory methods must be left as-is for
backward compatibility.
Result:
Fixes#3531
Motivation:
We missed to flush the channel when using HttpChunkedInput (this is done when using SSL). This will result in a stale.
Modifications:
Replace ctx.write(...) with ctx.writeAndFlush(...)
Result:
Correctly working example.
Motivation:
To support HTTP2 we need APLN support. This was not provided before when using OpenSslEngine, so SSLEngine (JDK one) was the only bet.
Beside this CipherSuiteFilter was not supported
Modifications:
- Upgrade netty-tcnative and make use of new features to support ALPN and NPN in server and client mode.
- Guard against segfaults after the ssl pointer is freed
- support correctly different failure behaviours
- add support for CipherSuiteFilter
Result:
Be able to use OpenSslEngine for ALPN / NPN for server and client.
Motivation:
The DefaultHttp2ConnectionDecoder class is calling verifyPrefaceReceived() for almost every frame event at all times.
The Http2ConnectionHandler class is calling readClientPrefaceString() on every decode event.
Modifications:
- DefaultHttp2ConnectionDecoder should not have to continuously call verifyPrefaceReceived() because it transitions boolean state 1 time for each connection.
- Http2ConnectionHandler should not have to continuously call readClientPrefaceString() because it transitions boolean state 1 time for each connection.
Result:
- Less conditional checks for the mainstream usage of the connection.
Motivation:
The Http2FrameLogger is currently using the internal logging classes. We should change this so that it's using the public classes and then converts internally.
Modifications:
Modified Http2FrameLogger and the examples to use the public LogLevel class.
Result:
Fixes#2512
While implementing netty-handler-proxy, I realized various issues in our
current socksx package. Here's the list of the modifications and their
background:
- Split message types into interfaces and default implementations
- so that a user can implement an alternative message implementations
- Use classes instead of enums when a user might want to define a new
constant
- so that a user can extend SOCKS5 protocol, such as:
- defining a new error code
- defining a new address type
- Rename the message classes
- to avoid abbreviated class names. e.g:
- Cmd -> Command
- Init -> Initial
- so that the class names align better with the protocol
specifications. e.g:
- AuthRequest -> PasswordAuthRequest
- AuthScheme -> AuthMethod
- Rename the property names of the messages
- so that the property names align better when the field names in the
protocol specifications
- Improve the decoder implementations
- Give a user more control over when a decoder has to be removed
- Use DecoderResult and DecoderResultProvider to handle decode failure
gracefully. i.e. no more Unknown* message classes
- Add SocksPortUnifinicationServerHandler since it's useful to the users
who write a SOCKS server
- Cleaned up and moved from the socksproxy example
Motivation:
HTTP/2 codec was implemented in master branch.
Since, master is not yet stable and will be some time before it gets released, backporting it to 4.1, enables people to use the codec with a stable netty version.
Modification:
The code has been copied from master branch as is, with minor modifications to suit the `ChannelHandler` API in 4.x.
Apart from that change, there are two backward incompatible API changes included, namely,
- Added an abstract method:
`public abstract Map.Entry<CharSequence, CharSequence> forEachEntry(EntryVisitor<CharSequence> visitor)
throws Exception;`
to `HttpHeaders` and implemented the same in `DefaultHttpHeaders` as a delegate to the internal `TextHeader` instance.
- Added a method:
`FullHttpMessage copy(ByteBuf newContent);`
in `FullHttpMessage` with the implementations copied from relevant places in the master branch.
- Added missing abstract method related to setting/adding short values to `HttpHeaders`
Result:
HTTP/2 codec can be used with netty 4.1
Motivation:
The example MemcacheClient set command doesn't work.
Modifications:
Fill the extras field buffer with zeros so that it gets written to the
request payload.
Result:
The example MemcacheClient set command works.
Related: #3122
Motivation:
The HttpStaticFileServer example writes the LastHttpContent twice at the
end of the transfer. HttpChunkedInput already produces a
LastHttpContent at the end of the stream, so there's no reason to write
another.
Modifications:
Do not write LastHttpContent in HttpStaticFileServerHandler when
HttpChunkedInput is used to transfer a file.
Result:
HttpStaticFileServer does not violates the protocol anymore.
Motivation:
When running the examples using the provided run-examples.sh script the
log level is 'info' level. It can be handy to be able to configure a
different level, for example 'debug', while learning and trying out the
the examples.
Modifications:
Added a dependency to logback-classic to the examples pom.xml, and also
added a logback configuration file. The log level can be configured by
setting the 'logLevel' system property, and if that property is not set
the default will be 'info' level.
The run-examples.sh was updated to show an example of using the system
property to set the log level to 'debug'
Result:
It is now possible to turn on debug logging by settnig a system property
on the command line.
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
The commit 50e06442c3 changed the type of
the constants in HttpHeaders.Names and HttpHeaders.Values, making 4.1
backward-incompatible with 4.0.
It also introduces newer utility classes such as HttpHeaderUtil, which
deprecates most static methods in HttpHeaders. To ease the migration
between 4.1 and 5.0, we should deprecate all static methods that are
non-existent in 5.0, and provide proper counterpart.
Modification:
- Revert the changes in HttpHeaders.Names and Values
- Deprecate all static methods in HttpHeaders in favor of:
- HttpHeaderUtil
- the member methods of HttpHeaders
- AsciiString
- Add integer and date access methods to HttpHeaders for easier future
migration to 5.0
- Add HttpHeaderNames and HttpHeaderValues which provide standard HTTP
constants in AsciiString
- Deprecate HttpHeaders.Names and Values
- Make HttpHeaderValues.WEBSOCKET lowercased because it's actually
lowercased in all WebSocket versions but the oldest one
- Add RtspHeaderNames and RtspHeaderValues which provide standard RTSP
constants in AsciiString
- Deprecate RtspHeaders.*
- Do not use AsciiString.equalsIgnoreCase(CharSeq, CharSeq) if one of
the parameters are AsciiString
- Avoid using AsciiString.toString() repetitively
- Change the parameter type of some methods from String to
CharSequence
Result:
Backward compatibility is recovered. New classes and methods will make
the migration to 5.0 easier, once (Http|Rtsp)Header(Names|Values) are
ported to master.
Motivation:
The header class hierarchy and algorithm was improved on the master branch for versions 5.x. These improvments should be backported to the 4.1 baseline.
Modifications:
- cherry-pick the following commits from the master branch: 2374e17, 36b4157, 222d258
Result:
Header improvements in master branch are available in 4.1 branch.
Motivation:
Improvements were made on the main line to support ALPN and mutual
authentication for TLS. These should be backported.
Modifications:
- Backport commits from the master branch
- f8af84d599
- e74c8edba3
Result:
Support for ALPN and mutual authentication.
Motivation:
As report in #2953 the websocket server example contained a bug and did therefore not work with chrome:
A websocket extension is added to the pipeline but extensions were disallowed in the handshaker and decoder,
which is leading the decoder to closing the connection after receiving an extension frame.
Modifications:
Allow websocket extensions in the handshaker to correctly enable the extension.
Result:
Working websocket server example
Fixes#2953
Related issue: #1133
Motivation:
There is no support for client socket connections via a proxy server in
Netty.
Modifications:
- Add a new module 'handler-proxy'
- Add ProxyHandler and its subclasses to support SOCKS 4a/5 and HTTP(S)
proxy connections
- Add a full parameterized test for most scenarios
- Clean up pom.xml
Result:
A user can make an outgoing connection via proxy servers with only
trivial effort.
Motivation:
It is often helpful to measure the performance of connections, e.g. the
latency and the throughput. This can be performed through benchmarks.
Modification:
This adds a simple but configurable benchmark for websockets into the
example directory. The Netty WebSocket server will echo all received
websocket frames and will provide an HTML/JS page which serves as the
client for the benchmark.
The benchmark also provides a verification mode that verifies the sent
against the received data. This can be used for the verification ob
websocket frame encoding and decoding funtionality.
Result:
A benchmark is added in form a further Netty websocket example.
With this benchmark it is easily possible to measure the performance between Netty and a browser
Motivation:
We incorrectly used SslContext.newServerContext() in some places where a we needed a client context.
Modifications:
Use SslContext.newClientContext() when using ssl on the client side.
Result:
Working ssl client examples.
Motivation:
The example mis handle two elements:
1) Last message is a LastHttpContent and is not taken into account by
the server handler
2) The client makes a sync on last write (chunked) but there is no flush
before, therefore the sync is waiting forever.
Modifications:
1) Take into account the message LastHttpContent in simple Get.
2) Removes sync but add flush for each post and multipost parts
Results:
Example is no more blocked after get test.
Should be done also in 4.0 and Master (similar changes)
- SocksV[45] -> Socks[45]
- Make encodeAsByteBuf package private with some hassle
- Split SocksMessageEncoder into Socks4MessageEncoder and
Socks5MessageEncoder, and remove the original
- Remove lazy singleton instantiation; we don't need it.
- Remove the deprecated methods
- Fix Javadoc errors
Motivation:
SOCKS 4 and 5 are very different protocols although they share the same
name. It is not possible to incorporate the two protocol versions into
a single package.
Modifications:
- Add a new package called 'socksx' to supercede 'socks' package.
- Add SOCKS 4/4a support to the 'socksx' package
Result:
codec-socks now supports all SOCKS versions
Motivation:
HttpOrSpdyChooser can be simplified so the user not need to implement getProtocol(...) method.
Modification:
Add implementation for the method. The user can override it if necessary.
Result:
Easier usage of HttpOrSpdyChooser.
Motivation:
OkResponseHandler is the last handler in the pipeline of the HTTP CORS
example. It is responsible for releasing all messages it handled.
Modification:
Extend SimpleChannelInboundHandler instead of
ChannelInboundHandlerAdapter
Result:
Fixed a leak
Motivation:
Persuit for the consistency in method naming
Modifications:
- Remove the 'get' prefix from all HTTP/SPDY message classes
- Fix some inspector warnings
Result:
Consistency
Motivation:
We have quite a bit of code duplication between HTTP/1, HTTP/2, SPDY,
and STOMP codec, because they all have a notion of 'headers', which is a
multimap of string names and values.
Modifications:
- Add TextHeaders and its default implementation
- Add AsciiString to replace HttpHeaderEntity
- Borrowed some portion from Apache Harmony's java.lang.String.
- Reimplement HttpHeaders, SpdyHeaders, and StompHeaders using
TextHeaders
- Add AsciiHeadersEncoder to reuse the encoding a TextHeaders
- Used a dedicated encoder for HTTP headers for better performance
though
- Remove shortcut methods in SpdyHeaders
- Replace SpdyHeaders.getStatus() with HttpResponseStatus.parseLine()
Result:
- Removed quite a bit of code duplication in the header implementations.
- Slightly better performance thanks to improved header validation and
hash code calculation
Motivation:
We have different message aggregator implementations for different
protocols, but they are very similar with each other. They all stems
from HttpObjectAggregator. If we provide an abstract class that provide
generic message aggregation functionality, we will remove their code
duplication.
Modifications:
- Add MessageAggregator which provides generic message aggregation
- Reimplement all existing aggregators using MessageAggregator
- Add DecoderResultProvider interface and extend it wherever possible so
that MessageAggregator respects the state of the decoded message
Result:
Less code duplication
Motivation:
Currently OkResponseHandler returns a DefaultHttpResponse which is not
correct and it should be returning complete http response.
Modifications:
Updated OkResponseHandler to return an instance of
DefaultFullHttpResponse.
Result:
It is not possible to add compression to the example without getting any
errors.
Motivation:
maven-antrun-plugin does not redirect stdin, and thus it's impossible to
run interactive examples such as securechat-client and telnet-client.
org.codehaus.mojo:exec-maven-plugin redirects stdin, but it buffers
stdout and stderr, and thus an application output is not flushed timely.
Modifications:
Deploy a forked version of exec-maven-plugin which flushes output
buffers in a timely manner.
Result:
Interactive examples work. Launches faster than maven-antrun-plugin.
Motivation:
The examples have not been updated since long time ago, showing various
issues fixed in this commit.
Modifications:
- Overall simplification to reduce LoC
- Use system properties to get options instead of parsing args.
- Minimize option validation
- Just use System.out/err instead of Logger
- Do not pass config as parameters - just access it directly
- Move the main logic to main(String[]) instead of creating a new
instance meaninglessly
- Update netty-build-21 to make checkstyle not complain
- Remove 'throws Exception' clause if possible
- Line wrap at 120 (previously at 80)
- Add an option to enable SSL for most examples
- Use ChannelFuture.sync() instead of await()
- Use System.out for the actual result. Use System.err otherwise.
- Delete examples that are not very useful:
- applet
- websocket/html5
- websocketx/sslserver
- localecho/multithreaded
- Add run-example.sh which simplifies launching an example from command
line
- Rewrite FileServer example
Result:
Shorter and simpler examples. A user can focus more on what it actually
does than miscellaneous stuff. A user can launch an example very
easily.
Motivation:
exec-maven-plugin does not flush stdout and stderr, making the console
output from the examples invisible to users
Modification:
Use maven-antrun-plugin instead
Result:
A user sees the output from the examples immediately.
Motivation:
According to TLS ALPN draft-05, a client sends the list of the supported
protocols and a server responds with the selected protocol, which is
different from NPN. Therefore, ApplicationProtocolSelector won't work
with ALPN
Modifications:
- Use Iterable<String> to list the supported protocols on the client
side, rather than using ApplicationProtocolSelector
- Remove ApplicationProtocolSelector
Result:
Future compatibility with TLS ALPN
Motivation:
- OpenSslEngine and JDK SSLEngine (+ Jetty NPN) have different APIs to
support NextProtoNego extension.
- It is impossible to configure NPN with SslContext when the provider
type is JDK.
Modification:
- Implement NextProtoNego extension by overriding the behavior of
SSLSession.getProtocol() for both OpenSSLEngine and JDK SSLEngine.
- SSLEngine.getProtocol() returns a string delimited by a colon (':')
where the first component is the transport protosol (e.g. TLSv1.2)
and the second component is the name of the application protocol
- Remove the direct reference of Jetty NPN classes from the examples
- Add SslContext.newApplicationProtocolSelector
Result:
- A user can now use both JDK SSLEngine and OpenSslEngine for NPN-based
protocols such as HTTP2 and SPDY
Motivation:
- There's no way to pass an argument to an example.
- Assigning a Maven profile for each example is an overkill.
It makes the pom.xml crowded.
Modifications:
- Remove example profiles from example/pom.xml
- Keep the list of examples in run-example.sh
- run-example.sh passes all options to exec-maven-plugin.
For example, we can now do this:
./run-example.sh -Dssl -Dport=443 http-server
Result:
- It's much easier to add a new example and provide an easy way to
launch it.
- We can still pass an arbitrary argument to the example being launched.
(I'll update all examples to make them get their options from system
properties rather than from args[].
Motivation:
Build fails with JDK 8 because npn-boot does not work with JDK 8
Modifications:
Do not specify bootclasspath when on JDK 8
Result:
Build is green again.
Motivation:
- example/pom.xml has quite a bit of duplication.
- We expect that we depend on npn-boot in more than one module in the
near future. (e.g. handler, codec-http, and codec-http2)
Modification:
- Deduplicate the profiles in example/pom.xml
- Move the build configuration related with npn-boot to the parent pom.
- Add run-example.sh that helps a user launch an example easily
Result:
- Cleaner build files
- Easier to add a new example
- Easier to launch an example
- Easier to run the tests that relies on npn-boot in the future
Motivation:
It's useful to have netty-tcnative dependency in netty-example because
we can play with OpenSslEngine from our IDE.
Modifications:
Add netty-tcnative to example/pom.xml
Motivation:
Some users already use an SSLEngine implementation in finagle-native. It
wraps OpenSSL to get higher SSL performance. However, to take advantage
of it, finagle-native must be compiled manually, and it means we cannot
pull it in as a dependency and thus we cannot test our SslHandler
against the OpenSSL-based SSLEngine. For an instance, we had #2216.
Because the construction procedures of JDK SSLEngine and OpenSslEngine
are very different from each other, we also need to provide a universal
way to enable SSL in a Netty application.
Modifications:
- Pull netty-tcnative in as an optional dependency.
http://netty.io/wiki/forked-tomcat-native.html
- Backport NativeLibraryLoader from 4.0
- Move OpenSSL-based SSLEngine implementation into our code base.
- Copied from finagle-native; originally written by @jpinner et al.
- Overall cleanup by @trustin.
- Run all SslHandler tests with both default SSLEngine and OpenSslEngine
- Add a unified API for creating an SSL context
- SslContext allows you to create a new SSLEngine or a new SslHandler
with your PKCS#8 key and X.509 certificate chain.
- Add JdkSslContext and its subclasses
- Add OpenSslServerContext
- Add ApplicationProtocolSelector to ensure the future support for NPN
(NextProtoNego) and ALPN (Application Layer Protocol Negotiation) on
the client-side.
- Add SimpleTrustManagerFactory to help a user write a
TrustManagerFactory easily, which should be useful for those who need
to write an alternative verification mechanism. For example, we can
use it to implement an unsafe TrustManagerFactory that accepts
self-signed certificates for testing purposes.
- Add InsecureTrustManagerFactory and FingerprintTrustManager for quick
and dirty testing
- Add SelfSignedCertificate class which generates a self-signed X.509
certificate very easily.
- Update all our examples to use SslContext.newClient/ServerContext()
- SslHandler now logs the chosen cipher suite when handshake is
finished.
Result:
- Cleaner unified API for configuring an SSL client and an SSL server
regardless of its internal implementation.
- When native libraries are available, OpenSSL-based SSLEngine
implementation is selected automatically to take advantage of its
performance benefit.
- Examples take advantage of this modification and thus are cleaner.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).
Modifications:
The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.
Result:
SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
Motivation:
Currently, there exists no example which shows how to use the memcache binary
protocol.
Modifications:
Add an example client and client handler to show how to utilize the binary
protocol in a memcache client with a simple interactive shell.
Result:
Users looking for an example can now start off with the provided one.
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.
Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.
Result:
Users are now able to configure multiple origins for CORS.
[https://github.com/netty/netty/issues/2346]
Motivation:
LocalEventLoopGroup and LocalEventLoop are not really special for LocalChannels. It can be used for other channel implementations as long as they don't require special handling.
Modifications:
- Add DefaultEventLoopGroup and DefaultEventLoop
- Deprecate LocalEventLoopGroup and make it extend DefaultEventLoopGroup
- Add DefaultEventLoop and remove LocalEventLoop
- Fix inspector warnings
Result:
- Better class names.
Merged WebSocketClient and WebSocketSslClient
Add private constructors to fix checkstyle errors.
More checkstyle madness.
made WebSocketClientRunner final
- Related issues: #1937#1938 and #1946
- Add InterfaceHttpPostRequestDecoder and Make HttpPostRequestDecoder implement it
- HttpPostRequestDecoder actually delegates itself to HttpPostStandardRequestDecoder or HttpPostMultipartRequestDecoder
- Remove IncompatibleDataDecoderException because it's not thrown anywhere now
- Move the version number to the parent pom's pluginManagement section
- Remove unnecessary system properties
- Increase the scope of execution from compile to runtime
Demonstrates the usage of SPDY from a client perspective. One can also
use a SPDY-enabled browser as a client, but it’s easier to understand
the internals of the protocol from a client point-of-view if you have
some code you can debug.
- Fixes#2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging. This is
more robust because some strict build tools fail to retrieve the
artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
- Fix a bug in DefaultProgressivePromise.tryProgress() where the notification is dropped
- Fix a bug in AbstractChannel.calculateMessageSize() where FileRegion is not counted
- HttpStaticFileServer example now uses zero copy file transfer if possible.
- write() now accepts a ChannelPromise and returns ChannelFuture as most
users expected. It makes the user's life much easier because it is
now much easier to get notified when a specific message has been
written.
- flush() does not create a ChannelPromise nor returns ChannelFuture.
It is now similar to what read() looks like.
- Remove channelReadSuspended because it's actually same with messageReceivedLast
- Rename messageReceived to channelRead
- Rename messageReceivedLast to channelReadComplete
We renamed messageReceivedLast to channelReadComplete because it
reflects what it really is for. Also, we renamed messageReceived to
channelRead for consistency in method names.
I must admit MesageList was pain in the ass. Instead of forcing a
handler always loop over the list of messages, this commit splits
messageReceived(ctx, list) into two event handlers:
- messageReceived(ctx, msg)
- mmessageReceivedLast(ctx)
When Netty reads one or more messages, messageReceived(ctx, msg) event
is triggered for each message. Once the current read operation is
finished, messageReceivedLast() is triggered to tell the handler that
the last messageReceived() was the last message in the current batch.
Similarly, for outbound, write(ctx, list) has been split into two:
- write(ctx, msg)
- flush(ctx, promise)
Instead of writing a list of message with a promise, a user is now
supposed to call write(msg) multiple times and then call flush() to
actually flush the buffered messages.
Please note that write() doesn't have a promise with it. You must call
flush() to get notified on completion. (or you can use writeAndFlush())
Other changes:
- Because MessageList is completely hidden, codec framework uses
List<Object> instead of MessageList as an output parameter.
- SimpleChannelInboundHandler now has a constructor parameter to let a
user decide to enable automatic message release. (the default is to
enable), which makes ChannelInboundConsumingHandler of less value.
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.
Memory consumption issue:
When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user. In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.
Memory footprint issue:
The old Netty 4 API decreased overall memory footprint by a great deal
in many cases. It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read. Instead, it
created a new buffer for each handler in a pipeline. This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.
Changes:
All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.
To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:
- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
- Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
- Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
- Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
- Similar to ReceiveBufferSizePredictor in Netty 3
- Some existing configuration properties such as
DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf
This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
- Fixes#1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
shutdownGracefully() provides two optional parameters that give more
control over when an executor has to be shut down.
- Related issue: #1307
- Add shutdownGracefully(..) and isShuttingDown()
- Deprecate shutdown() / shutdownNow()
- Replace lastAccessTime with lastExecutionTime and update it after task
execution for accurate quiet period check
- runAllTasks() and runShutdownTasks() update it automatically.
- Add updateLastExecutionTime() so that subclasses can update it
- Add a constructor parameter that tells not to add an unncessary wakeup
task in execute() if addTask() wakes up the executor thread
automatically. Previously, execute() always called wakeup() after
addTask(), which often caused an extra dummy task in the task queue.
- Use shutdownGracefully() wherever possible / Deprecation javadoc
- Reduce the running time of SingleThreadEventLoopTest from 40s to 15s
using custom graceful shutdown parameters
- Other changes made along with this commit:
- takeTask() does not throw InterruptedException anymore.
- Returns null on interruption or wakeup
- Make sure runShutdownTasks() return true even if an exception was
raised while running the shutdown tasks
- Remove unnecessary isShutdown() checks
- Consistent use of SingleThreadEventExecutor.nanoTime()
Replace isWakeupOverridden with a constructor parameter
This change also introduce a few other changes which was needed:
* ChannelHandler.beforeAdd(...) and ChannelHandler.beforeRemove(...) were removed
* ChannelHandler.afterAdd(...) -> handlerAdded(...)
* ChannelHandler.afterRemoved(...) -> handlerRemoved(...)
* SslHandler.handshake() -> SslHandler.hanshakeFuture() as the handshake is triggered automatically after
the Channel becomes active
- Now works without the transport package
- Renamed TransferFuture to ProgressiveFuture and ChannelProgressiveFuture / same for promises
- ProgressiveFutureListener now extends GenericProgressiveFutureListener and GenericFutureListener (add/removeTransferListener*() were removed)
- Renamed DefaultEventListeners to DefaultFutureListeners and only accept GenericFutureListeners
- Various clean-up
- Fixes#1229
- Primarily written by @normanmaurer and revised by @trustin
This commit removes the notion of unfolding from the codec framework
completely. Unfolding was introduced in Netty 3.x to work around the
shortcoming of the codec framework where encode() and decode() did not
allow generating multiple messages.
Such a shortcoming can be fixed by changing the signature of encode()
and decode() instead of introducing an obscure workaround like
unfolding. Therefore, we changed the signature of them in 4.0.
The change is simple, but backward-incompatible. encode() and decode()
do not return anything. Instead, the codec framework will pass a
MessageBuf<Object> so encode() and decode() can add the generated
messages into the MessageBuf.
- Add ChannelHandlerUtil and move the core logic of ChannelInbound/OutboundMessageHandler to ChannelHandlerUtil
- Add ChannelHandlerUtil.SingleInbound/OutboundMessageHandler and make ChannelInbound/OutboundMessageHandlerAdapter implement them. This is a backward incompatible change because it forces all handler methods to be public (was protected previously)
- Fixes: #1119
- Move common methods from ByteBuf to Buf
- Rename ensureWritableBytes() to ensureWritable()
- Rename readable() to isReadable()
- Rename writable() to isWritable()
- Add isReadable(int) and isWritable(int)
- Add AbstractMessageBuf
- Rewrite DefaultMessageBuf and QueueBackedMessageBuf
- based on Josh Bloch's public domain ArrayDeque impl
* This is done because we noticed that the previous change limit the usage more then it gave us any benefit. Now it is possible
again to rewrite the url on the fly or reuse the objects when writing a proxy and so limit the GC pressure.
* Fixes also #979
