Commit Graph

462 Commits

Author SHA1 Message Date
Carl Mastrangelo
dfa69f0980 Unconditionally initialize sockaddrs in epoll linuxsocket (#9299)
Motivation:

Compiling with -Werror,-Wuninitialized complains about the sockaddrs being uninitialized.
I believe this is because the init function netty_unix_socket_initSockaddr is in a
separate compilation unit.  Since this code isn't on the criticial path, it's easy
to just memset the variables rather than suppress the warning.

Modification:
Always clear the sockaddrs, even if they will be initialized later.

Result:
Able to compile with warnings turned on
2019-06-29 12:18:42 +02:00
jimin
78adeb5408 All override methods must be added @override (#9285)
Motivation:

Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation

Modifications:

Add missing `@Override`s

Result:

Code cleanup
2019-06-27 13:52:06 +02:00
jimin
411b6a56b5 remove unused imports (#9287)
Motivation:

Some imports are not used

Modification:

remove unused imports

Result:

Code cleanup
2019-06-26 21:16:16 +02:00
Norman Maurer
9d5420987a Add support for loopbackmode and accessing the configured interface when using epoll native transport with multicast (#9218)
Motivation:

We did not have support for enable / disable loopback mode in our native epoll transport and also missed the implemention to access the configured interface.

Modifications:

Add implementation and adjust test to cover it

Result:

More complete multicast support with native epoll transport
2019-06-07 13:45:45 -07:00
Carl Mastrangelo
f01278616a Properly debounce wakeups (#9191)
Motivation:
The wakeup logic in EpollEventLoop is overly complex

Modification:
* Simplify the race to wakeup the loop
* Dont let the event loop wake up itself (it's already awake!)
* Make event loop check if there are any more tasks after preparing to
sleep.  There is small window where the non-eventloop writers can issue
eventfd writes here, but that is okay.

Result:
Cleaner wakeup logic.

Benchmarks:

```
BEFORE
Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  408381.411 ± 2857.498  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  157022.360 ± 1240.573  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   60571.704 ±  331.125  ops/s

Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  440546.953 ± 1652.823  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  168114.751 ± 1176.609  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   61231.878 ±  520.108  ops/s
```
2019-06-04 05:27:15 -07:00
Norman Maurer
63f7854c1e Don't read from timerfd and eventfd on each EventLoop tick (#9192)
Motivation:

We do not need to issue a read on timerfd and eventfd when the EventLoop wakes up if we register these as Edge-Triggered. This removes the overhead of 2 syscalls and so helps to reduce latency.

Modifications:

- Ensure we register the timerfd and eventfd with EPOLLET flag
- If eventfd_write fails with EAGAIN, call eventfd_read and try eventfd_write again as we only use it as wake-up mechanism.

Result:

Less syscalls and so reducing overhead.

Co-authored-by: Carl Mastrangelo <carl@carlmastrangelo.com>
2019-05-31 07:00:44 +02:00
Norman Maurer
f966a0a041 Correctly detect InternetProtocolFamily when EpollDatagramChannel is created with existing FileDescriptor (#9185)
Motivation:

When EpollDatagramChannel is created with an existing FileDescriptor we should detect the correct InternetProtocolFamily.

Modifications:

Obtain the InternetProtocolFamily from the given FD

Result:

Use correct InternetProtocolFamily when EpollDatagramChannel is created via existing FileDescriptor
2019-05-26 20:30:05 +02:00
Steve Buzzard
33d1a91083 Added UDP multicast (with caveats: getInterface, getNetworkInterface, block or loopback-mode-disabled operations).
Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for common use cases.

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-25 10:06:13 +02:00
Julien Viet
f85583047e KQueueEventLoop | EpollEventLoop may incorrectly update registration when FD is reused.
Motivation:

The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.

Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.

As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.

The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed

Modifications:

- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop

Result:

KQueue and Epoll native transports correctly handle FD reuse

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-22 10:11:42 +02:00
Norman Maurer
ed61e5f543 Only use static Exception instances when we can ensure addSuppressed … (#9152)
Motivation:

OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.

Modifications:

Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.

Result:

Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
2019-05-17 22:42:53 +02:00
Nick Hill
d9c23a1e5b Remove static wildcard imports in EpollDomainSocketChannelConfig (#9066)
Motivation

These aren't needed, only one field from each class is used. It also showed as an ambiguous identifier compilation error in my IDE even though javac is obviously fine with it.

Modifications

Static-import explicit ChannelOption fields in EpollDomainSocketChannelConfig instead of using .* wildcard.

Result

Cleaner / more consistent code.
2019-04-18 07:34:08 +02:00
Nick Hill
7f79182c82 Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle (#9060)
Motivation

These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.

Modifications

Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.

Result

Less code.
2019-04-16 09:21:43 +02:00
Norman Maurer
bbb9ea69e5 Revert "Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)"
This reverts commit a3e8c86741 as there are some issues that need to be fixed first.
2019-04-12 21:33:25 +02:00
Norman Maurer
42680bc021 Throw IOException (not ChannelException) if netty_epoll_linuxsocket_setTcpMd5Sig fails (#9039)
Motivation:

At the moment we throw a ChannelException if netty_epoll_linuxsocket_setTcpMd5Sig fails. This is inconsistent with other methods which throw a IOException.

Modifications:

Throw IOException

Result:

More correct and consistent exception usage in epoll transport
2019-04-12 15:15:52 +02:00
Norman Maurer
9ef5c0946a Add IPv6 multicast test to testsuite (#9037)
Motivation:

We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.

Modifications:

- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.

Result:

Better test coverage
2019-04-12 14:26:09 +02:00
Norman Maurer
e00e06c037 netty_epoll_linuxsocket_setTcpMd5Sig should throw ChannelException when not able to init sockaddr
Motivation:

When netty_epoll_linuxsocket_setTcpMd5Sig fails to init the sockaddr we should throw an exception and not silently return.

Modifications:

Throw exception if init of sockaddr fails.

Result:

Correctly report back error to user.
2019-04-11 18:52:33 +02:00
Norman Maurer
7c35781f4d
DefaultPromise may throw checked exceptions that are not advertised (#8995)
Motivation:

We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.

Modifications:

- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests

Result:

Fixes https://github.com/netty/netty/issues/8521.
2019-04-10 07:15:31 +02:00
Steve Buzzard
5e8fdf06bc Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)
…nterface, block or loopback-mode-disabled operations).


Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
2019-04-08 20:14:07 +02:00
Norman Maurer
0f34345347
Merge ChannelInboundHandler and ChannelOutboundHandler into ChannelHa… (#8957)
Motivation:

In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.

Modifications:

- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.

Result:

Cleaner and simpler code in terms of class-hierarchy.
2019-03-28 09:28:27 +00:00
Norman Maurer
6297f183a3 Upgrade to new netty-build and com.puppycrawl.tools 8.18 (#8980)
Motivation:

com.puppycrawl.tools checkstyle < 8.18 was reported to contain a possible security flaw. We should upgrade.

Modifications:

- Upgrade netty-build and checkstyle.
- Fix checkstyle errors

Result:

Fixes https://github.com/netty/netty/issues/8968.
2019-03-26 14:22:06 +01:00
Lunfu Zhong
238018e4ea Support ALLOW_HALF_CLOSURE channel option on Unix domain socket. (#8932)
Motivation:

Since DomainSocketChannel is a DuplexChannel,  which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.

I thought this could be a missing feature of Unix domain socket, so here the PR for it.

Modifications:

1. Added allHalfClosure property both in  EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.

Result:

ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
2019-03-19 11:37:54 +01:00
Norman Maurer
42742e233f
Deprecate ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter (#8929)
Motivation:

As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.

Modifications:

- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore

Result:

Cleanup class-hierarchy and make things a bit more flexible.
2019-03-13 09:46:10 +01:00
Norman Maurer
2720a40a20 Remove --add-opens=java.base/java.nio=ALL-UNNAMED when running tests as it is not needed anymore since a long time (#8934)
Motivation:

At some point we needed --add-opens=java.base/java.nio=ALL-UNNAMED to run our native tests but this is not true anymore.

Modifications:

Remove --add-opens=java.base/java.nio=ALL-UNNAMED when running native tests.

Result:

Remove obsolate jvm arg.
2019-03-13 08:25:59 +01:00
Norman Maurer
106bd0c091 DefaultFileRegion.transferTo with invalid count may cause busy-spin (#8885)
Motivation:

`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.

Modifications:

- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite

Result:

Fixes https://github.com/netty/netty/issues/8868.
2019-02-26 11:21:03 +01:00
Norman Maurer
b9d277dbcb Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 10:00:55 +01:00
Norman Maurer
a2ccc287c3 Add more tests to KQueue and Epoll testsuites. (#8851)
Motivation:

We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.

Modifications:

Extend tests and so run these for our native transports as well.

Result:

More tests.
2019-02-08 20:12:29 +01:00
田欧
e8efcd82a8 migrate java8: use requireNonNull (#8840)
Motivation:

We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)

Modifications:

- Use Objects.requireNonNull(...)

Result:

Less code to maintain.
2019-02-04 10:32:25 +01:00
Norman Maurer
d96c02fc68 Reduce direct memory overhead per EpollEventLoop when using EpollDatagramChannel (#8825)
Motivation:

When using a linux distribution that supports sendmmsg(...) we allocated enough direct memory per EpollEventLoop to be able to write IOV_MAX number of iovecs per message that can be written per sendmmsg.
The number of messages that can be written per sendmmsg(...) call is limited by UIO_MAX_IOV.

In practice this resulted in an allocation of 16MB direct memory per EpollEventLoop instance that stayed allocated until the EpollEventLoop was shutdown which happens as part of the shutdown of the enclosing EpollEVentLoopGroup.

This resulted in quite some heavy direct memory usage in practice even when in practice we have very slim changes to ever need all of the memory.

Modification:

Adjust NativeDatagramPacketArray to share one IovArray instance across all NativeDatagramPacket instances it holds. This limits the max number of iovecs we can write across all messages to IOV_MAX per sendmmsg(...) call.
This in practice will still be enough to allow us to write multiple messages with one syscall while keep the memory overhead to a minimum.

Result:

Smaller direct memory footprint per EpollEventLoop when using EpollDatagramChannel on distributions that support sendmmsg(...).
Fixes https://github.com/netty/netty/issues/8814
2019-02-02 07:14:53 +01:00
Norman Maurer
99face616a Reduce GC produced by native DatagramChannel implementations when in connected mode. (#8806)
Motivation:

In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...)  method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.

Modifications:

- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.

Result:

Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
2019-02-01 10:29:55 +01:00
田欧
d7648f1d93 use checkPositive/checkPositiveOrZero (#8803)
Motivation:

We have a utility method to check for > 0 and >0 arguments. We should use it.

Modification:

use checkPositive/checkPositiveOrZero instead of if statement.

Result:

Re-use utility method.
2019-01-31 09:06:59 +01:00
田欧
6222101924 migrate java8: use lambda and method reference (#8781)
Motivation:

We can use lambdas now as we use Java8.

Modification:

use lambda function for all package, #8751 only migrate transport package.

Result:

Code cleanup.
2019-01-29 14:06:05 +01:00
田欧
e941cbe27a remove unused import statement (#8792)
Motivation:
The code contained some unused import statements.

Modification:
Remove unused import statements.

Result:
Code cleanup
2019-01-28 16:50:15 +01:00
田欧
934a07fbe2 migrate java8 (#8779)
Motivation:

We can omit argument types when using Java8.

Modification:

Omit arguments where possible.

Result:

Cleaner code.
2019-01-28 05:55:30 +01:00
Norman Maurer
310f31b392
Update to new checkstyle plugin (#8777)
Motivation:

We need to update to a new checkstyle plugin to allow the usage of lambdas.

Modifications:

- Update to new plugin version.
- Fix checkstyle problems.

Result:

Be able to use checkstyle plugin which supports new Java syntax.
2019-01-24 16:24:19 +01:00
Norman Maurer
3d6e6136a9
Decouple EventLoop details from the IO handling for each transport to… (#8680)
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization

Motiviation:

As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.

Modifications:

This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.

Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:

  * Adding instrumentation / metrics:
    * how many Channels are registered on an SingleThreadEventLoop
    * how many Channels were handled during the IO processing in an EventLoop run
    * how many task were handled during the last EventLoop / EventExecutor run
    * how many outstanding tasks we have
    ...
    ...
  * Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
  * Use different Promise / Future / ScheduledFuture implementations
  * decorate Runnable / Callables when submitted to the EventExecutor / EventLoop

As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:

  * AbstractEventLoop
  * AbstractEventLoopGroup
  * EventExecutorChooser
  * EventExecutorChooserFactory
  * DefaultEventLoopGroup
  * DefaultEventExecutor
  * DefaultEventExecutorGroup

Result:

Fixes https://github.com/netty/netty/issues/8514 .
2019-01-23 08:32:05 +01:00
田欧
9d62deeb6f Java 8 migration: Use diamond operator (#8749)
Motivation:

We can use the diamond operator these days.

Modification:

Use diamond operator whenever possible.

Result:

More modern code and less boiler-plate.
2019-01-22 16:07:26 +01:00
Norman Maurer
a4d1e97987 Fix compile error introduced by incorrect cherry-pick of 7a613c2131 2019-01-21 09:30:52 +01:00
yulianoifa-mobius
7a613c2131 Allowed IP_FREEBIND option for UDP epoll (#8728)
Motivation:

While using Load Balancers or HA support is needed there are cases when UDP channel need to bind to IP Address which is not available on network interfaces locally.

Modification:

Modified EpollDatagramChannelConfig to allow IP_FREEBIND option

Result:

Fixes ##8727.
2019-01-21 07:42:36 +01:00
Norman Maurer
1fe931b6e2
Make it possible to use a wrapped EventLoop with a Channel (#8677)
Motiviation:

Because of how we implemented the registration / deregistration of an EventLoop it was not possible to wrap an EventLoop implementation and use it with a Channel.

Modification:

- Introduce EventLoop.Unsafe which is responsible for the actual registration.
- Move validation of EventLoop / Channel combo to the EventLoop
- Add unit test that verifies that wrapping works

Result:

Be able to wrap an EventLoop and so add some extra functionality.
2019-01-17 09:17:51 +01:00
Dmitriy Dumanskiy
67cb8cce5b Clenaup: simplify EpollEventLoop.closeAll() (#8719)
Motivation:

Avoid unnecessary iteration and `ArrayList` allocation.

Modification:

```
for (AbstractEpollChannel channel: channels.values()) {
     array.add(channel);
}
```
replaced with 

`array.addAll(channels.values())`

and

```
Collection<AbstractEpollChannel> array = new ArrayList<AbstractEpollChannel>(channels.size());
array.addAll(channels.values())
```

replaced with:

`AbstractEpollChannel[] localChannels = channels.values().toArray(new AbstractEpollChannel[0]);`

Result:

Simpler code in `EpollEventLoop.closeAll();`
2019-01-16 11:00:59 +01:00
Norman Maurer
c10ccc5dec
Tighten contract between Channel and EventLoop by require the EventLoop on Channel construction. (#8587)
Motivation:

At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.

Modifications:

- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour

Result:

A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.

Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).

Fixes https://github.com/netty/netty/issues/8513.
2019-01-14 20:11:13 +01:00
Norman Maurer
cb6ae72df2
Handling AUTO_READ should not be the responsibility of DefaultChannel… (#8650)
* Handling AUTO_READ should not be the responsibility of DefaultChannelPipeline but the Channel itself.

Motivation:

At the moment we do automatically call read() in the DefaultChannelPipeline when fireChannelReadComplete() / fireChannelActive() is called and the Channel is using auto read. This is nice in terms of sharing code but imho is not the responsibility of the ChannelPipeline implementation but the responsibility of the Channel implementation.

Modifications:

Move handing of auto read from DefaultChannelPipeline to Channel implementations.

Result:

More clear responsibiliy and not depending on implemention details of the ChannelPipeline.
2018-12-14 10:11:34 +00:00
Feri73
5618229203 Correcting Maven Dependencies (#8622)
Motivation:

Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.

Modifications:

For all maven modules, add all of their dependencies to pom.xml

Result:

All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
2018-12-06 09:02:00 +01:00
Norman Maurer
2c78dde749 Update version number to start working on Netty 5 2018-11-20 15:49:57 +01:00
Norman Maurer
d4b1202e62
Add testcase for epollWait(...) with negative timerfd values. (#8447)
Motivation:

https://github.com/netty/netty/issues/8444 reports that there is some issue with negative values passed to timerfd_settime. This test verifies that everything is working as expected.

Modifications:

Add testcase.

Result:

Test to verify expected behaviour.
2018-10-30 19:38:02 +01:00
root
3e7ddb36c7 [maven-release-plugin] prepare for next development iteration 2018-10-29 15:38:51 +00:00
root
9e50739601 [maven-release-plugin] prepare release netty-4.1.31.Final 2018-10-29 15:37:47 +00:00
Johno Crawford
5b3b8db07f epoll_wait produces an EINVAL error since 4.1.30 (#8350)
Motivation:

epoll_wait should work in 4.1.30 like it did in 4.1.29.

Modifications:

Revert Integer.MAX_VALUE back to MAX_SCHEDULED_TIMERFD_NS (999,999,999).
Add unit test.

Result:

epoll_wait will no longer throw EINVAL.
2018-10-12 05:02:41 +02:00
Matteo Merli
3a96e7373b Added option to do busy-wait on epoll (#8267)
Motivation:

Add an option (through a SelectStrategy return code) to have the Netty event loop thread to do busy-wait on the epoll.

The reason for this change is to avoid the context switch cost that comes when the event loop thread is blocked on the epoll_wait() call.

On average, the context switch has a penalty of ~13usec.

This benefits both:

The latency when reading from a socket
Scheduling tasks to be executed on the event loop thread.
The tradeoff, when enabling this feature, is that the event loop thread will be using 100% cpu, even when inactive.

Modification:

Added SelectStrategy option to return BUSY_WAIT
Epoll loop will do a epoll_wait() with no timeout
Use pause instruction to hint to processor that we're in a busy loop
Result:

When enabled, minimizes impact of context switch in the critical path
2018-09-28 22:52:00 +02:00
Roger
6138541033 Avoid repeating the same field and hiding it (#8335)
Motivation

The EpollChannelConfig (same for KQueues) and its subclasses repeatetly declare their own channel field which leads to a 3x repetition for each config instance. Given the fields are protected or package-private it's exposing the code code to "field hiding" bugs.

Modifications

Use the the existing protected channel field from the DefaultChannelConfig class and simply cast it when needed.

Result

Fixes #8331
2018-09-28 17:37:14 +02:00