Commit Graph

900 Commits

Author SHA1 Message Date
George Agnelli
0666924e8c Don't close the connection whenever Expect: 100-continue is missing.
Motivation:

The 4.1.0-Beta3 implementation of HttpObjectAggregator.handleOversizedMessage closes the
connection if the client sent oversized chunked data with no Expect:
100-continue header. This causes a broken pipe or "connection reset by
peer" error in some clients (tested on Firefox 31 OS X 10.9.5,
async-http-client 1.8.14).

This part of the HTTP 1.1 spec (below) seems to say that in this scenario the connection
should not be closed (unless the intention is to be very strict about
how data should be sent).

http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html

"If an origin server receives a request that does not include an
Expect request-header field with the "100-continue" expectation,
the request includes a request body, and the server responds
with a final status code before reading the entire request body
from the transport connection, then the server SHOULD NOT close
the transport connection until it has read the entire request,
or until the client closes the connection. Otherwise, the client
might not reliably receive the response message. However, this
requirement is not be construed as preventing a server from
defending itself against denial-of-service attacks, or from
badly broken client implementations."

Modifications:

Change HttpObjectAggregator.handleOversizedMessage to close the
connection only if keep-alive is off and Expect: 100-continue is
missing. Update test to reflect the change.

Result:

Broken pipe and connection reset errors on the client are avoided when
oversized data is sent.
2014-10-24 21:35:17 +02:00
Trustin Lee
789e323b79 Handle an empty ByteBuf specially in HttpObjectEncoder
Related: #2983

Motivation:

It is a well known idiom to write an empty buffer and add a listener to
its future to close a channel when the last byte has been written out:

  ChannelFuture f = channel.writeAndFlush(Unpooled.EMPTY_BUFFER);
  f.addListener(ChannelFutureListener.CLOSE);

When HttpObjectEncoder is in the pipeline, this still works, but it
silently raises an IllegalStateException, because HttpObjectEncoder does
not allow writing a ByteBuf when it is expecting an HttpMessage.

Modifications:

- Handle an empty ByteBuf specially in HttpObjectEncoder, so that
  writing an empty buffer does not fail even if the pipeline contains an
  HttpObjectEncoder
- Add a test

Result:

An exception is not triggered anymore by HttpObjectEncoder, when a user
attempts to write an empty buffer.
2014-10-22 14:46:22 +09:00
Daniel Bevenius
67c68ef8ba CorsHandler should release HttpRequest after processing preflight/error.
Motivation:
Currently, when the CorsHandler processes a preflight request, or
respondes with an 403 Forbidden using the short-curcuit option, the
HttpRequest is not released which leads to a buffer leak.

Modifications:
Releasing the HttpRequest when done processing a preflight request or
responding with an 403.

Result:
Using the CorsHandler will not cause buffer leaks.
2014-10-22 06:37:34 +02:00
Frederic Bregier
eb415fded6 V4.1 Fix "=" character in HttpPostRequestDecoder
Motivation
Issue #3004 shows that "=" character was not supported as it should in
the HttpPostRequestDecoder in form-data boundary.

Modifications:
Add 2 methods in StringUtil
- split with maxPart argument: String split with max parts only (to prevent multiple '='
to be source of extra split while not needed)
- substringAfter: String part after delimiter (since first part is not
needed)
Use those methods in HttpPostRequestDecoder.
Change and the HttpPostRequestDecoderTest to check using a boundary
beginning with "=".

Results:
The fix implies more stability and fix the issue.
2014-10-21 16:06:37 +09:00
Trustin Lee
2309a75d15 Add proxy support for client socket connections
Related issue: #1133

Motivation:

There is no support for client socket connections via a proxy server in
Netty.

Modifications:

- Add a new module 'handler-proxy'
- Add ProxyHandler and its subclasses to support SOCKS 4a/5 and HTTP(S)
  proxy connections
- Add a full parameterized test for most scenarios
- Clean up pom.xml

Result:

A user can make an outgoing connection via proxy servers with only
trivial effort.
2014-10-14 12:29:08 +09:00
Trustin Lee
4a45d23129 Add the encoder/decoder getter methods to HttpClientCodec
Motivation:

There's no way for a user to get the encoder and the decoder of an
HttpClientCodec.  The lack of such getter methods makes it impossible to
remove the codec handlers from the pipeline correctly.

For example, a user could add more than one HttpClientCodec to the
pipeline, and then the user cannot easily decide which encoder and
decoder to remove.

Modifications:

- Add encoder() and decoder() method to HttpClientCodec which returns
  HttpRequestEncoder and HttpResponseDecoder respectively
- Also made the same changes to HttpServerCodec

Result:

A user can distinguish the handlers added by multiple HttpClientCodecs
easily.
2014-10-14 12:29:08 +09:00
Matthias Einwag
01e3bcf30c Add verification for websocket subprotocol on the client side.
Motivation:

Websocket clients can request to speak a specific subprotocol. The list of
subprotocols the client understands are sent to the server. The server
should select one of the protocols an reply this with the websocket
handshake response. The added code verifies that the reponded subprotocol
is valid.

Modifications:

Added verification of the subprotocol received from the server against the
subprotocol(s) that the user requests. If the user requests a subprotocol
but the server responds none or a non-requested subprotocol this is an
error and the handshake fails through an exception. If the user requests
no subprotocol but the server responds one this is also marked as an
error.

Addiontionally a getter for the WebSocketClientHandshaker in the
WebSocketClientProtocolHandler is added to enable the user of a
WebSocketClientProtocolHandler to extract the used negotiated subprotocol.

Result:

The subprotocol field which is received from a websocket server is now
properly verified on client side and clients and websocket connection
attempts will now only succeed if both parties can negotiate on a
subprotocol.
If the client sends a list of multiple possible subprotocols it can
extract the negotiated subprotocol through the added handshaker getter (WebSocketClientProtocolHandler.handshaker().actualSubprotocol()).
2014-10-13 07:35:31 +02:00
Matthias Einwag
80ae2c9180 Add a test for handover from HTTP to Websocket
Motivation:
I was not fully reassured that whether everything works correctly when a websocket client receives the websocket handshake HTTP response and a websocket frame in a single ByteBuf (which can happen when the server sends a response directly or shortly after the connect). In this case some parts of the ByteBuf must be processed by HTTP decoder and the remaining by the websocket decoder.

Modification:
Adding a test that verifies that in this scenaria the handshake and the message are correctly interpreted and delivered by Netty.

Result:
One more test for Netty.
The test succeeds - No problems
2014-10-13 07:23:10 +02:00
Matthias Einwag
a6b3fd8a72 Fix the leak in the WebSocketClientProtocolHandshakeHandler
Motivation:
The WebSocketClientProtocolHandshakeHandler never releases the received handshake response.

Modification:
Release the message in a finally block.

Result:
No more leak
2014-10-12 20:26:12 +02:00
Matthias Einwag
43681b5608 Avoid vectored writes for small websocket messages
Motivation:
The WebSocket08FrameEncoder contains an optimization path for small messages which copies the message content into the header buffer to avoid vectored writes. However this path is in the current implementation never taken because the target buffer is preallocated only for exactly the size of the header.

Modification:
For messages below a certain treshold allocate the buffer so that the message can be directly copied. Thereby the optimized path is taken.

Result:
A speedup of about 25% for 100byte messages. Declines with bigger message sizes. I have currently set the treshold to 1kB which is a point where I could still see a few percent speedup, but we should also avoid burning too many CPU cycles.
2014-10-12 20:12:07 +02:00
Matthias Einwag
4eb1529d2c Improve WebSocket performance
Motivation:

Websocket performance is to a large account determined through the masking
and unmasking of frames. The current behavior of this in Netty can be
improved.

Modifications:

Perform the XOR operation not bytewise but in int blocks as long as
possible. This reduces the number of necessary operations by 4. Also don't
read the writerIndex in each iteration.
Added a unit test for websocket decoding and encoding for verifiation.

Result:

A large performance gain (up to 50%) in websocket throughput.
2014-10-12 19:48:49 +02:00
Matthias Einwag
ffda229cf4 Send a websocket close frame with status code when receiving invalid frames
Motivation:

According to the websocket specification peers may send a close frame when
they detect a protocol violation (with status code 1002). The current
implementation simply closes the connection. This update should add this
functionality. The functionality is optional - but it might help other
implementations with debugging when they receive such a frame.

Modification:

When a protocol violation in the decoder is detected and a close was not
already initiated by the remote peer a close frame is
sent.

Result:

Remotes which will send an invalid frame will now get a close frame that
indicates the protocol violation instead of only seeing a closed
connection.
2014-09-29 20:05:30 +02:00
Norman Maurer
f76a6f40d4 Allow to access uri of QueryStringDecoder. Related to [#2896]
Motivation:

Sometimes it is useful to be able to access the uri that was used to initialize the QueryStringDecoder.

Modifications:

Add method which allows to retrieve the uri.

Result:

Allow to retrieve the uri that was used to create the QueryStringDecoder.
2014-09-19 20:08:23 +02:00
Scott Mitchell
003f97168c HTTP Content Decoder Cleanup Bug
Motiviation:
The HTTP content decoder's cleanup method is not cleaning up the decoder correctly.
The cleanup method is currently doing a readOutbound on the EmbeddedChannel but
for decoding the call should be readInbound.

Modifications:
-Change readOutbound to readInbound in the cleanup method

Result:
The cleanup method should be correctly releaseing unused resources
2014-09-10 14:58:40 +02:00
Norman Maurer
65686b6c83 Reduce memory copies in spdy compression implementation.
Motivation:

Currently we do more memory copies then needed.

Modification:

- Directly use heap buffers to reduce memory copy
- Correctly release buffers to fix buffer leak

Result:

Less memory copies and no leaks
2014-08-21 11:27:32 +02:00
Trustin Lee
b5f61d0de5 [maven-release-plugin] prepare for next development iteration 2014-08-16 03:27:42 +09:00
Trustin Lee
76ac3b21a5 [maven-release-plugin] prepare release netty-4.1.0.Beta3 2014-08-16 03:27:37 +09:00
Trustin Lee
b3c1904cc9 [maven-release-plugin] prepare for next development iteration 2014-08-15 09:31:03 +09:00
Trustin Lee
e013b2400f [maven-release-plugin] prepare release netty-4.1.0.Beta2 2014-08-15 09:30:59 +09:00
plucury
ca29be5e77 Allow ChunkedInput to provide the progress of its transfer
Related issue: #2741 and #2151

Motivation:

There is no way for ChunkedWriteHandler to know the progress of the
transfer of a ChannelInput. Therefore, ChannelProgressiveFutureListener
cannot get exact information about the progress of the transfer.

If you add a few methods that optionally provides the transfer progress
to ChannelInput, it becomes possible for ChunkedWriteHandler to notify
ChannelProgressiveFutureListeners.

If the input has no definite length, we can still use the progress so
far, and consider the length of the input as 'undefined'.

Modifications:

- Add ChunkedInput.progress() and ChunkedInput.length()
- Modify ChunkedWriteHandler to use progress() and length() to notify
  the transfer progress

Result:

ChunkedWriteHandler now notifies ChannelProgressiveFutureListener.
2014-08-14 16:49:09 -07:00
Norman Maurer
d0b5fb9548 [#2768] Correctly duplicate buffer for CloseWebSocketFrames
Motivation:

The _0XFF_0X00 buffer is not duplicated and empty after the first usage preventing the connection close to happen on subsequent close frames.

Modifications:

Correctly duplicate the buffer.

Result:

Multiple CloseWebSocketFrames are handled correctly.
2014-08-14 09:54:35 +02:00
Jeff Pinner
af26826348 SPDY: fix SpdySessionHandler::updateSendWindowSize
In Netty 3, downstream writes of SPDY data frames and upstream reads of
SPDY window udpate frames occur on different threads.

When receiving a window update frame, we synchronize on a java object
(SpdySessionHandler::flowControlLock) while sending any pending writes
that are now able to complete.

When writing a data frame, we check the send window size to see if we
are allowed to write it to the socket, or if we have to enqueue it as a
pending write. To prevent races with the window update frame, this is
also synchronized on the same SpdySessionHandler::flowControlLock.

In Netty 4, upstream and downstream operations on any given channel now
occur on the same thread. Since java locks are re-entrant, this now
allows downstream writes to occur while processing window update frames.

In particular, when we receive a window update frame that unblocks a
pending write, this write completes which triggers an event notification
on the response, which in turn triggers a write of a data frame. Since
this is on the same thread it re-enters the lock and modifies the send
window. When the write completes, we continue processing pending writes
without knowledge that the window size has been decremented.
2014-08-11 11:21:24 +02:00
Trustin Lee
8e1007d693 Fix a bug where SpdySession.getActiveStreams() returns incorrect set
Related issue: #2743

Motivation:

When there are more than one stream with the same priority, the set
returned by SpdySession.getActiveStream() will not include all of them,
because it uses TreeSet and only compares the priority of streams. If
two different streams have the same priority, one of them will be
discarded by TreeSet.

Modification:

- Rename getActiveStreams() to activeStreams()
- Replace PriorityComparator with StreamComparator

Result:

Two different streams with the same priority are compared correctly.
2014-08-05 17:46:06 -07:00
Trustin Lee
fd813f76fa Add test cases for HttpContentCompressor
- Ported from 386a06dbfa
2014-08-05 15:48:43 -07:00
Norman Maurer
e33f12f5b8 [#2732] HttpRequestEncoder may produce invalid uri if uri parameters are included.
Motivation:

If the requests contains uri parameters but not path the HttpRequestEncoder does produce an invalid uri while try to add the missing path.

Modifications:

Correctly handle the case of uri with paramaters but no path.

Result:

HttpRequestEncoder produce correct uri in all cases.
2014-08-05 10:13:53 +02:00
Trustin Lee
3c4321ce43 Use our own URL shortener wherever possible 2014-07-31 17:06:19 -07:00
Jeff Pinner
2e2abb0b74 SPDY: fix pushed response NullPointerException 2014-07-21 07:54:15 +02:00
Idel Pivnitskiy
b83df4c6b3 Fix NPE problems
Motivation:

Now Netty has a few problems with null values.

Modifications:

- Check HAProxyProxiedProtocol in HAProxyMessage constructor and throw NPE if it is null.
If HAProxyProxiedProtocol is null we will set AddressFamily as null. So we will get NPE inside checkAddress(String, AddressFamily) and it won't be easy to understand why addrFamily is null.
- Check File in DiskFileUpload.toString().
If File is null we will get NPE when calling toString() method.
- Check Result<String> in MqttDecoder.decodeConnectionPayload(...).
If !mqttConnectVariableHeader.isWillFlag() || !mqttConnectVariableHeader.hasUserName() || !mqttConnectVariableHeader.hasPassword() we will get NPE when we will try to create new instance of MqttConnectPayload.
- Check Unsafe before calling unsafe.getClass() in PlatformDependent0 static block.
- Removed unnecessary null check in WebSocket08FrameEncoder.encode(...).
Because msg.content() can not return null.
- Removed unnecessary null check in DefaultStompFrame(StompCommand) constructor.
Because we have this check in the super class.
- Removed unnecessary null checks in ConcurrentHashMapV8.removeTreeNode(TreeNode<K,V>).
- Removed unnecessary null check in OioDatagramChannel.doReadMessages(List<Object>).
Because tmpPacket.getSocketAddress() always returns new SocketAddress instance.
- Removed unnecessary null check in OioServerSocketChannel.doReadMessages(List<Object>).
Because socket.accept() always returns new Socket instance.
- Pass Unpooled.buffer(0) instead of null inside CloseWebSocketFrame(boolean, int) constructor.
If we will pass null we will get NPE in super class constructor.
- Added throw new IllegalStateException in GlobalEventExecutor.awaitInactivity(long, TimeUnit) if it will be called before GlobalEventExecutor.execute(Runnable).
Because now we will get NPE. IllegalStateException will be better in this case.
- Fixed null check in OpenSslServerContext.setTicketKeys(byte[]).
Now we throw new NPE if byte[] is not null.

Result:

Added new null checks when it is necessary, removed unnecessary null checks and fixed some NPE problems.
2014-07-20 12:55:22 +02:00
Idel Pivnitskiy
ad1389be9d Small performance improvements
Modifications:

- Added a static modifier for CompositeByteBuf.Component.
This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Removed unnecessary boxing/unboxing operations in HttpResponseDecoder, RtspResponseDecoder, PerMessageDeflateClientExtensionHandshaker and PerMessageDeflateServerExtensionHandshaker
A boxed primitive is created from a String, just to extract the unboxed primitive value.
- Removed unnecessary 3 times calculations in DiskAttribute.addContent(...).
- Removed unnecessary checks if file exists before call mkdirs() in NativeLibraryLoader and PlatformDependent.
Because the method mkdirs() has this check inside.
- Removed unnecessary `instanceof AsciiString` check in StompSubframeAggregator.contentLength(StompHeadersSubframe) and StompSubframeDecoder.getContentLength(StompHeaders, long).
Because StompHeaders.get(CharSequence) always returns java.lang.String.
2014-07-20 09:26:04 +02:00
Gernot Pansy
7d8d9b2c6e Fixed NPE in WebSocket00FrameDecoder if end couldn't be found in text frame
Motivation:
When we receive an incomplete WebSocketFrame we need to make sure to wait for more data. Because we not did this we could produce a NPE.

Modification:
Make sure we not try to add null into the RecyclableArrayList

Result:
no more NPE on incomplete frames.
2014-07-16 20:03:57 +02:00
Norman Maurer
8edfde3f26 [#2650] Allow to disable http header validation in SpdyHttpDecoder and SpdyHttpCodec
Motivation:

HTTP header validation can be expensive so we should allow to disable it like we do in HttpObjectDecoder.

Modification:

Add constructor argument to disable validation.

Result:
Performance improvement
2014-07-11 08:33:37 +02:00
Norman Maurer
909d1f2c0f Reuse previous created HttpHeaders by HttpObjectAggregator
Motivation:

HttpObjectAggregator currently creates a new FullHttpResponse / FullHttpRequest for each message it needs to aggregate. While doing so it also creates 2 DefaultHttpHeader instances (one for the headers and one for the trailing headers). This is bad for two reasons:
  - More objects are created then needed and also populate the headers is not for free
  - Headers may get validated even if the validation was disabled in the decoder

Modification:

- Wrap the previous created HttpResponse / HttpRequest and so reuse the original HttpHeaders
- Reuse the previous created trailing HttpHeader.
- Fix a bug where the trailing HttpHeader was incorrectly mixed in the headers.

Result:

- Less GC
- Faster HttpObjectAggregator implementation
2014-07-11 07:08:12 +02:00
Norman Maurer
33a810a513 Move generic code to HttpOrSpdyChooser to simplify implementations
Motivation:

HttpOrSpdyChooser can be simplified so the user not need to implement getProtocol(...) method.

Modification:

Add implementation for the method. The user can override it if necessary.

Result:

Easier usage of HttpOrSpdyChooser.
2014-07-07 09:37:10 +02:00
Trustin Lee
e167b02d52 [maven-release-plugin] prepare for next development iteration 2014-07-04 17:26:02 +09:00
Trustin Lee
ba50cb829b [maven-release-plugin] prepare release netty-4.1.0.Beta1 2014-07-04 17:25:54 +09:00
Trustin Lee
787663a644 [maven-release-plugin] rollback the release of netty-4.1.0.Beta1 2014-07-04 17:11:14 +09:00
Trustin Lee
83eae705e1 [maven-release-plugin] prepare release netty-4.1.0.Beta1 2014-07-04 17:02:17 +09:00
Trustin Lee
d0912f2709 Fix most inspector warnings
Motivation:

It's good to minimize potentially broken windows.

Modifications:

Fix most inspector warnings from our profile
Update IntObjectHashMap

Result:

Cleaner code
2014-07-02 19:55:07 +09:00
Jay
461d3c876f Maintain decoder result in HttpObjectAggregator
Motivation:
DecodeResult is dropped when aggregate HTTP messages.

Modification:

Make sure we not drop the DecodeResult while aggregate HTTP messages.

Result:

Correctly include the DecodeResult for later processing.
2014-06-28 22:08:53 +02:00
Trustin Lee
2c0ecd9d44 Remove the deprecated methods in SPDY
SPDY is an experimental package. No need to keep ABI compatibility.
2014-06-27 16:47:38 +09:00
Alexey Parfenov
4b4f4e619e Fix integer overflow in HttpObjectEncoder when handling chunked encoding and FileRegion > Integer.MAX_VALUE
Motivation:

Due to integer overflow bug, writes of FileRegions to http server pipeline (eg like one from HttpStaticFileServer example) with length greater than Integer.MAX_VALUE are ignored in 1/2 of cases (ie no data gets sent to client)

Modification:

Correctly handle chunk sized > Integer.MAX_VALUE

Result:

Be able to use FileRegion > Integer.MAX_VALUE when using chunked encoding.
2014-06-24 12:03:48 +02:00
Trustin Lee
41d44a8161 Remove 'get' prefix from all HTTP/SPDY messages
Motivation:

Persuit for the consistency in method naming

Modifications:

- Remove the 'get' prefix from all HTTP/SPDY message classes
- Fix some inspector warnings

Result:

Consistency
2014-06-24 18:03:33 +09:00
Trustin Lee
085a61a310 Refactor FastThreadLocal to simplify TLV management
Motivation:

When Netty runs in a managed environment such as web application server,
Netty needs to provide an explicit way to remove the thread-local
variables it created to prevent class loader leaks.

FastThreadLocal uses different execution paths for storing a
thread-local variable depending on the type of the current thread.
It increases the complexity of thread-local removal.

Modifications:

- Moved FastThreadLocal and FastThreadLocalThread out of the internal
  package so that a user can use it.
- FastThreadLocal now keeps track of all thread local variables it has
  initialized, and calling FastThreadLocal.removeAll() will remove all
  thread-local variables of the caller thread.
- Added FastThreadLocal.size() for diagnostics and tests
- Introduce InternalThreadLocalMap which is a mixture of hard-wired
  thread local variable fields and extensible indexed variables
- FastThreadLocal now uses InternalThreadLocalMap to implement a
  thread-local variable.
- Added ThreadDeathWatcher.unwatch() so that PooledByteBufAllocator
  tells it to stop watching when its thread-local cache has been freed
  by FastThreadLocal.removeAll().
- Added FastThreadLocalTest to ensure that removeAll() works
- Added microbenchmark for FastThreadLocal and JDK ThreadLocal
- Upgraded to JMH 0.9

Result:

- A user can remove all thread-local variables Netty created, as long as
  he or she did not exit from the current thread. (Note that there's no
  way to remove a thread-local variable from outside of the thread.)
- FastThreadLocal exposes more useful operations such as isSet() because
  we always implement a thread local variable via InternalThreadLocalMap
  instead of falling back to JDK ThreadLocal.
- FastThreadLocalBenchmark shows that this change improves the
  performance of FastThreadLocal even more.
2014-06-19 21:13:55 +09:00
Trustin Lee
c076c33901 Backport the additional AsciiString/TextHeader changes from master
- Add useful static methods to AsciiString
- Add more getters in TextHeaders
- Remove unnecessary utility methods in SpdyHttpHeaders
2014-06-14 17:33:34 +09:00
Trustin Lee
681d460938 Introduce TextHeaders and AsciiString
Motivation:

We have quite a bit of code duplication between HTTP/1, HTTP/2, SPDY,
and STOMP codec, because they all have a notion of 'headers', which is a
multimap of string names and values.

Modifications:

- Add TextHeaders and its default implementation
- Add AsciiString to replace HttpHeaderEntity
  - Borrowed some portion from Apache Harmony's java.lang.String.
- Reimplement HttpHeaders, SpdyHeaders, and StompHeaders using
  TextHeaders
- Add AsciiHeadersEncoder to reuse the encoding a TextHeaders
  - Used a dedicated encoder for HTTP headers for better performance
    though
- Remove shortcut methods in SpdyHeaders
- Replace SpdyHeaders.getStatus() with HttpResponseStatus.parseLine()

Result:

- Removed quite a bit of code duplication in the header implementations.
- Slightly better performance thanks to improved header validation and
  hash code calculation
2014-06-14 15:36:19 +09:00
belliottsmith
2a2a21ec59 Introduce FastThreadLocal which uses an EnumMap and a predefined fixed set of possible thread locals
Motivation:
Provide a faster ThreadLocal implementation

Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);

Result:
Improved performance
2014-06-13 10:56:18 +02:00
Frederic Bregier
8074b5c6ee [#2542] HTTP post request decoder does not support quoted boundaries
Motivation:
According to RFC2616 section 19, boundary string could be quoted, but
currently the PostRequestDecoder does not support it while it should.

Modifications:
Once the boundary is found, one check is made to verify if the boundary
is "quoted", and if so, it is "unqoted".

Note: in following usage of this boundary (as delimiter), quote seems no
more allowed according to the same RFC, so the reason that only the
boundary definition is corrected.

Result:
Now the boundary could be whatever quoted or not. A Junit test case
checks it.
2014-06-08 12:08:03 +02:00
Frederic Bregier
f402350d76 [#2544] Correctly parse Multipart-mixed POST HTTP request in case of entity ends with odd number of 0x0D
Motivation:
When an attribute is ending with an odd number of CR (0x0D), the decoder
add an extra CR in the decoded attribute and should not.

Modifications:
Each time a CR is detected, the next byte was tested to be LF or not. If
not, in a number of places, the CR byte was lost while it should not be.
When a CR is detected, if the next byte is not LF, the CR byte should be
saved as the position point to the next byte (not LF). When a CR is
detected, if there is not yet other available bytes, the position is
reset to the position of CR (since a LF could follow).

A new Junit test case is added, using DECODER and variable number of CR
in the final attribute (testMultipartCodecWithCRasEndOfAttribute).

Result:
The attribute is now correctly decoded with the right number of CR
ending bytes.
2014-06-08 11:24:18 +02:00
Trustin Lee
8b0a0f9a8f Introduce MessageAggregator and DecoderResultProvider
Motivation:

We have different message aggregator implementations for different
protocols, but they are very similar with each other.  They all stems
from HttpObjectAggregator.  If we provide an abstract class that provide
generic message aggregation functionality, we will remove their code
duplication.

Modifications:

- Add MessageAggregator which provides generic message aggregation
- Reimplement all existing aggregators using MessageAggregator
- Add DecoderResultProvider interface and extend it wherever possible so
  that MessageAggregator respects the state of the decoded message

Result:

Less code duplication
2014-06-05 16:51:14 +09:00
Josh Hoyt
8583dd03fc codec-http: Document the semantics of HttpResponseStatus equality and comparison 2014-05-30 07:52:20 +02:00
Daniel Bevenius
1a22186645 Adding short-curcuit option for CORS
Motivation:
CORS request are currently processed, and potentially failed, after the
target ChannelHandler(s) have been invoked. This might not be desired, for
example a HTTP PUT or POST might have been performed.

Modifications:
Added a shortCurcuit option to CorsConfig which when set will
cause a validation of the HTTP request's 'Origin' header and verify that
it is valid according to the configuration. If found invalid an 403
"Forbidden" response will be returned and not further processing will
take place.

This is indeed no help for non browser request, like using curl, which
can set the 'Origin' header.

Result:
Users can now configure if the 'Origin' header should be validated
upfront and have the request rejected before any further processing
takes place.
2014-05-06 12:16:57 +02:00
Norman Maurer
8a39b9fedc Fix buffer leak introduced by #2462
Motivation:
Because of not correctly release a buffer before null out the reference a memory leak shows up.

Modifications:
Correct call buffer.release() before null out reference.

Result:
No more leak
2014-05-06 10:03:24 +02:00
Jeff Pinner
1351349243 SPDY: ensure SpdyHeaderBlockRawDecoder always reads entire input 2014-05-05 07:33:05 +02:00
Jeff Pinner
326efe5b42 SPDY: release headerBlock in SpdyFrameCodec 2014-05-05 07:26:21 +02:00
Jeff Pinner
1d9c431604 SPDY: remove unused code in SpdyHeaderBlockRawEncoder 2014-05-05 07:01:56 +02:00
Sun Ning
d713f015da Made websocket maxFramePayloadSize configurable from WebSocketServerProtocolHandler.
Motivation:

Currently there's no way to configure maxFramePayloadSize from
WebSocketServerProtocolHandler, which is the most used entry point of
WebSocket server.

Modifications:

Added another constructor for maxFramePayloadSize.

Result:

We can configure max frame size for websocket packet in
WebSocketServerProtocolHandler. It will also keep backward compatibility
with default max size: 65536. (65536 is hard-coded max size in previous
version of Netty)
2014-05-05 06:24:28 +02:00
Jeff Pinner
9dbcf1af49 SPDY: allow subclassing of SpdyFrameCodec 2014-05-03 14:41:51 +02:00
Norman Maurer
93fab1d5a3 Remove ContinuationWebSocketFrame.aggregatedText()
Motivation:
Before we aggregated the full text in the WebSocket08FrameDecoder just to fill in the ContinuationWebSocketFrame.aggregatedText(). The problem was that there was no upper-limit and so it would be possible to see an OOME if the remote peer sends a TextWebSocketFrame + a never ending stream of ContinuationWebSocketFrames. Furthermore the aggregation does not really belong in the WebSocket08FrameDecoder, as we provide an extra ChannelHandler for this anyway (WebSocketFrameAggregator).

Modification:
Remove the ContinuationWebSocketFrame.aggregatedText() method and corresponding constructor. Also refactored WebSocket08FrameDecoder a bit to me more efficient which is now possible as we not need to aggregate here.

Result:
No more risk of OOME because of frames.
2014-04-30 14:49:17 +02:00
Daniel Bevenius
2f082cf9a2 Adding support for echoing the request origin for CORS.
Motivation:
When CORS has been configured to allow "*" origin, and at the same time
is allowing credentials/cookies, this causes an error from the browser
because when the response 'Access-Control-Allow-Credentials' header
is true, the 'Access-Control-Allow-Origin' must be an actual origin.

Modifications:
Changed CorsHandler setOrigin method to check for the combination of "*"
origin and allowCredentials, and if the check matches echo the CORS
request's 'Origin' value.

Result:
This addition enables the echoing of the request 'Origin' value as the
'Access-Control-Allow-Origin' value when the server has been configured
to allow any origin in combination with allowCredentials.

This allows client requests to succeed when expecting the server to
be able to handle "*" origin and at the same time be able to send cookies
by setting 'xhr.withCredentials=true'. A concrete example of this is
the SockJS protocol which expects behaviour.
2014-04-25 18:20:02 +02:00
Trustin Lee
d765f6b870 Synchronized between 4.1 and master (part 3)
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-25 16:17:59 +09:00
Trustin Lee
db3709e652 Synchronized between 4.1 and master
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-25 00:38:02 +09:00
Norman Maurer
18e2a45d7c [#2401] Improve documentation of HttpObjectAggregator
Motivation:
Make it more clear what the output of HttpObjectAggregator is and that it need to come after the encoder in the pipeline.

Modifications:
Change javadocs to make things more clear.

Result:
Better docs
2014-04-17 15:45:00 +02:00
Norman Maurer
40bcb17bf9 Fix missed buffer leaks in SpdyFrameDecoderTest
Motivation:
 Fix leaks reported during running SpdyFrameDecoderTest

Modifications:
Make sure the produced buffers of SpdyFrameDecoder and SpdyFrameDecoderTest are released

Result:

No more leak reports during run the tests.
2014-04-16 14:01:50 +02:00
Norman Maurer
2e8e7e486a Fix buffer leaks in SpdyFrameDecoderTest
Motivation:

Fix leaks reported during running SpdyFrameDecoderTest

Modifications:
Make sure the produced buffer of SpdyFrameDecoder is released

Result:

No more leak reports during run the tests.
2014-04-16 10:48:23 +02:00
Norman Maurer
71f5bb84a6 Fix buffer leaks in SPDY test
Motivation:

Fix leaks reported during SPDY test.

Modifications:

Use ReferenceCountUtil.releaseLater(...) to make sure everything is released once the tests are done.

Result:

No more leak reports during run the tests.
2014-04-16 06:51:26 +02:00
Jeff Pinner
7808b9926d SPDY: refactor frame codec implementation
Motivation:

Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).

Modifications:

The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.

Result:

SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
2014-04-15 19:57:38 +02:00
Daniel Bevenius
4fc9afa102 Adding origins whitelist support for CORS
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.

Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.

Result:
Users are now able to configure multiple origins for CORS.

[https://github.com/netty/netty/issues/2346]
2014-03-30 19:40:48 +02:00
Brendt Lucas
6bce61bf1b [#2234] Use QueryStringDecoder.decodeComponent to decode url-encoded data instead of Java's URLDecoder.
Motivation:
Previously, we used URLDecoder.decode(...) to decode url-encoded data. This generates a lot of garbage and takes a considerable amount of time.

Modifications:
Replace URLDecoder.decode(...) with QueryStringDecoder.decodeComponent(...)

Result:
Less garbage to GC and faster decode processing.
2014-03-22 14:15:06 +01:00
Daniel Bevenius
110878fe2c Fixing CorsConfigTest failure under Java 8.
Motivation:
When running the build with Java 8 the following error occurred:

java: reference to preflightResponseHeader is ambiguous
  both method
  <T>preflightResponseHeader(java.lang.CharSequence,java.lang.Iterable<T>)
  in io.netty.handler.codec.http.cors.CorsConfig.Builder and method
  <T>preflightResponseHeader(java.lang.String,java.util.concurrent.Callable<T>)
  in io.netty.handler.codec.http.cors.CorsConfig.Builder match

The offending class was CorsConfigTest and its shouldThrowIfValueIsNull
which contained the following line:
withOrigin("*").preflightResponseHeader("HeaderName", null).build();

Modifications:
Updated the offending method with to supply a type, and object array, to
avoid the error.

Result:
After this I was able to build with Java 7 and Java 8
2014-03-22 07:44:54 +01:00
Daniel Bevenius
74f418bace Adding support for specifying preflight response headers.
Motivation:

An intermediary like a load balancer might require that a Cross Origin
Resource Sharing (CORS) preflight request have certain headers set.
As a concrete example the Elastic Load Balancer (ELB) requires the
'Date' and 'Content-Length' header to be set or it will fail with a 502
error code.

This works is an enhancement of https://github.com/netty/netty/pull/2290

Modifications:

CorsConfig has been extended to make additional HTTP response headers
configurable for preflight responses. Since some headers, like the
'Date' header need to be generated each time, m0wfo suggested using a
Callable.

Result:

By default, the 'Date' and 'Content-Lenght' headers will be sent in a
preflight response. This can be overriden and users can specify
any headers that might be required by different intermediaries.
2014-03-21 15:40:59 +01:00
Frederic Bregier
397f81f253 [#2305] Fix issue related to decoding post request raized an exception due to a split of information by chunk not correctly taken into account by the decoder
Motivation:

If the last item analyzed in a previous received HttpChunk/HttpContent was a part of an attribute's name, the read index was not set to the new right place and therefore raizing an exception in some case (since the "new" name analyzed is empty, which is not allowed so the exception).

What appears there is that the read index should be reset to the last valid position encountered whatever the case. Currently it was set when only when there is an attribute not already finished (name is ok, but content is possibly not).

Therefore the issue is that elements could be rescanned multiple times (including completed elements) and moreover some bad decoding can occur such as when in a middle of an attribute's name.

Modifications:

To fix this issue, since "firstpos" contains the last "valid" read index of the decoding (when finding a '&', '=', 'CR/LF'), we should add the setting of the read index for the following cases:

'lastchunk' encountered, therefore finishing the current buffer
any other cases than current attribute is not finished (name not found yet in particular)
So adding for this 2 cases:

undecodedChunk.readerIndex(firstpos);

Result:

Now the decoding is done once, content is added from chunk/content to chunk/content, name is decoded correctly even if in the middle of 2 chunks/contents.
A Junit test code was added: testChunkCorrect that should not raized any exception.
2014-03-14 09:45:40 +01:00
David Dossot
4f069e5c36 added support for empty query parameters 2014-03-10 06:46:08 +01:00
Chris Mowforth
01daefe925 Add content length and date headers to CORS response 2014-03-06 21:00:27 +01:00
Dao Ngoc
fcc6b544a4 Fix #2275 %s WebSocket version %s server handshake 2014-02-28 17:19:18 -08:00
Trustin Lee
ac5592fc05 Fix checkstyle 2014-02-26 16:18:19 -08:00
Trustin Lee
24fc1b9b37 Fix a bug where HttpObjectDecoder generates two LastHttpContent consecutively
Motivation:
When an HttpResponseDecoder decodes an invalid chunk, a LastHttpContent instance is produced and the decoder enters the 'BAD_MESSAGE' state, which is not supposed to produce a message any further.  However, because HttpObjectDecoder.invalidChunk() did not clear this.message out to null, decodeLast() will produce another LastHttpContent message on a certain situation.

Modification:
Do not forget to null out HttpObjectDecoder.message in invalidChunk(), and add a test case for it.

Result:
No more consecutive LastHttpContent messages produced by HttpObjectDecoder.
2014-02-26 15:53:53 -08:00
Jeff Pinner
b02531f0aa SPDY: remove SPDY/3 support 2014-02-20 15:00:32 -08:00
Trustin Lee
738d3f77b9 Fix another leak in HttpObjectAggregatorTest by removing redundant code 2014-02-20 14:30:25 -08:00
Trustin Lee
874a66c8fb Fix a memory leak in HttpObjectAggregatorTest 2014-02-20 13:49:35 -08:00
Trustin Lee
2c4aff13c7 Add an operation that resets the state of HttpObjectDecoder
Motivation:

Currently, it is impossible to give a user the full control over what to do in response to the request with 'Expect: 100-continue' header.  Currently, a user have to do one of the following:

- Accept the request and respond with 100 Continue, or
- Send the reject response and close the connection.

.. which means it is impossible to send the reject response and keep the connection alive so that the client sends additional requests.

Modification:

Added a public method called 'reset()' to HttpObjectDecoder so that a user can reset the state of the decoder easily.  Once called, the decoder will assume the next input will be the beginning of a new request.

HttpObjectAggregator now calls `reset()`right after calling 'handleOversizedMessage()' so that the decoder can continue to decode the subsequent request even after the request with 'Expect: 100-continue' header is rejected.

Added relevant unit tests / Minor clean-up

Result:

This commit completes the fix of #2211
2014-02-20 13:41:54 -08:00
Trustin Lee
e278b57489 Added a test for oversized HTTP responses 2014-02-20 11:46:41 -08:00
Trustin Lee
fcc41a62bd Overall clean-up of HttpObjectAggregator / Handle oversized response differently
- Related: #2211
2014-02-20 11:36:56 -08:00
Chris Mowforth
91376263d7 Expose a callback in HttpObjectAggregator to handle oversized messages
- Related: #2211
2014-02-20 11:36:56 -08:00
Trustin Lee
ddb6e3672c Fix a bug where HttpObjectAggregator doesn't always produce FullHttpMessage
- Fixes #2182
- Always convert an unfull invalid message to a full message
2014-02-19 15:31:53 -08:00
Trustin Lee
396a81c811 Ensure that the last bad chunk is LastHttpChunk 2014-02-19 15:19:35 -08:00
Trustin Lee
b1f27d9aa8 HttpObjectDecoder.invalidChunk() should return LastHttpChunk
because the decoder will enter 'BAD_MESSAGE' state and will not produce any chunk since then.
2014-02-19 14:59:18 -08:00
Trustin Lee
99beb188c4 Fix inefficient loop in QueryStringDecoder.decodeComponent()
- Fixes #2228
- There's no point of looping until the end of the component if at least one '%' or '+' is found.
2014-02-14 13:26:43 -08:00
Trustin Lee
abcb39b638 Do not use String.format() for log message generation
- It's slow.
2014-02-13 19:31:17 -08:00
Trustin Lee
7e1db4feb7 Deprecate CombinedChannelDuplexHandler in favor of ChannelHandlerAppender
- Fixes #2233
2014-02-13 19:20:25 -08:00
Trustin Lee
ac70dc4546 Update the version to 4.1.0.Alpha1-SNAPSHOT 2014-02-13 18:32:26 -08:00
Trustin Lee
5226f75cfa Clean up HttpObjectAggregator 2014-02-13 18:25:15 -08:00
Trustin Lee
8837afddf8 Enable a user specify an arbitrary information with ReferenceCounted.touch()
- Related: #2163
- Add ResourceLeakHint to allow a user to provide a meaningful information about the leak when touching it
- DefaultChannelHandlerContext now implements ResourceLeakHint to tell where the message is going.
- Cleaner resource leak report by excluding noisy stack trace elements
2014-02-13 18:16:25 -08:00
Trustin Lee
45e70d9935 Add ReferenceCounted.touch() / Add missing retain() overrides
- Fixes #2163
- Inspector warnings
2014-02-13 18:10:11 -08:00
Trustin Lee
77d1f97b57 Add an HTML5 encoder mode for HttpPostRequestEncoder
- backported from 709be30442 by @igstan
2014-02-13 17:55:07 -08:00
Trustin Lee
4b0634b06a Revive the deleted methods in HttpDataFactory and deprecate them 2014-02-13 17:48:13 -08:00
Michael Nitschinger
574480e332 Rename HttpDataFactory.*datas to *data. Fixes #2094 2014-02-13 17:45:36 -08:00
Trustin Lee
df346a023b Change the return type of EmbeddedChannel.read*() from Object to an ad-hoc type parameter
.. so that there's no need to explicitly down-cast.

Fixes #2067
2014-02-13 17:19:26 -08:00
Frederic Bregier
9bd44a1d7c Add support for 'charset' property for multipart boundaries
- Fixes #2004
2014-02-13 17:12:59 -08:00
Trustin Lee
bea2acdf12 Allow specifying a custom charset for a multipart Attribute
- Fixed #2025
- Adapted from @BabyDuncan's pull request: #2031
- Overall ugliness clean-up
2014-02-13 16:55:22 -08:00
Norman Maurer
f6ffc5c1c7 [#1682] HttpVersion.valueOf(...) should not convert to uppercase 2014-02-13 16:36:36 -08:00
Daniel Bevenius
fa33529ca5 Adding check for zero readable bytes in WebSocket08FrameDecoder decode. 2014-02-13 15:49:44 -08:00
Trustin Lee
a327a25a6c Use StringUtil.simpleClassName(..) instead of Class.getSimpleName() where necessary
- Class.getSimpleName() doesn't render anonymous classes very well
- + some minor cleanup
2014-02-13 15:37:16 -08:00
Trustin Lee
a5f33f4020 Fix some inspector warnings 2014-02-13 15:25:09 -08:00
fredericBregier
651c7b056a Split HttpPostRequestDecoder into HttpPostStandardRequestDecoder and HttpPostMultipartRequestDecoder / Add HttpData.maxSize
- Related issues: #1937 #1938 and #1946
- Add InterfaceHttpPostRequestDecoder and Make HttpPostRequestDecoder implement it
- HttpPostRequestDecoder actually delegates itself to HttpPostStandardRequestDecoder or HttpPostMultipartRequestDecoder
- Remove IncompatibleDataDecoderException because it's not thrown anywhere now
2014-02-13 15:24:45 -08:00
Trustin Lee
499033d44f Add a shortcut method for collision-free naming 2014-02-13 15:17:09 -08:00
Norman Maurer
60acd54c7e [#1876] Make use of proper state machine in WebSocket08FrameDecoder for performance reasons 2014-02-13 14:34:34 -08:00
Norman Maurer
85ab9b5982 [#1710] Add missing duplicate() overrides in interfaces 2014-02-13 13:57:28 -08:00
Norman Maurer
084db044cd [#2219] Fix javadocs of HttpObjectAggregator to show correct handler order in pipeline 2014-02-09 17:10:09 +01:00
Trustin Lee
060eed9e80 Prefer interface to implementation in type declaration
This fixes the build failure with JDK 8 due to animal sniffer error
2014-02-08 08:50:27 -08:00
Daniel Bevenius
2e064ee87f Fixing spelling of 'request' for handler names. 2014-02-07 13:50:39 +01:00
Trustin Lee
2598223d0e Fix resource leaks in WebSocketServerProtocol(Handshake)Handler
- Related: #1975
2014-02-06 21:22:01 -08:00
Norman Maurer
dddfb149a5 [#2173] Fix regression that let HttpRequestDecoder fail if the websocket response and a websocketframe are send in one go 2014-02-06 10:34:05 +01:00
Norman Maurer
407e12d99b Not throw an exception if subprotocol is not supported but just drop the header as stated in the RFC's 2014-01-26 11:01:00 +01:00
Trustin Lee
6b790f1868 Fix a compilation error 2014-01-24 20:07:33 +09:00
Trustin Lee
bea7039c3e Add a log message on deletion failure 2014-01-24 16:45:48 +09:00
Frederic Bregier
2249437225 Fix fileChannel not closed, preventing delete to occur correctly 2014-01-24 16:45:48 +09:00
Norman Maurer
d67184b488 [maven-release-plugin] prepare for next development iteration 2014-01-21 08:18:32 +01:00
Norman Maurer
287515210d [maven-release-plugin] prepare release netty-4.0.15.Final 2014-01-21 08:18:26 +01:00
Frederic Bregier
da5da8e212 Fix try to delete file while it does not exist anymore (see #2102 and #1713) in reference to this issue 2014-01-21 14:17:34 +09:00
Trustin Lee
149c7e82a2 Add HttpPostrequestEncoderTest by @igstan 2014-01-19 22:22:08 +09:00
Trustin Lee
95bcbe5e08 Backport the HttpPostRequestEncoder fixes by @igstan 2014-01-19 22:21:24 +09:00
Trustin Lee
f3482670f9 Fix IllegalReferenceCountException which occurs when multipart data is stored in memory
- Fixes #2102
2014-01-19 17:50:48 +09:00
Trustin Lee
2389c71e81 Fix resource leak in InternalAttribute.setValue() 2014-01-19 16:53:43 +09:00
Trustin Lee
9b38e8778c Prettify / Saner initial capacity 2014-01-19 15:09:41 +09:00
Norman Maurer
faf8becf2e Make use of ByteBufProcessor for extract initial line and headers
This gives some nice performance boost as readByte() is quite expensive because of the index / replay checks.
2014-01-16 20:14:08 +01:00
Stephane Landelle
8930709940 += won't let compile optimize String concats 2014-01-16 20:10:07 +01:00
Daniel Bevenius
75b0360867 Adding a Cross Origin Resource Sharing (CORS) handler. 2014-01-16 08:18:16 +01:00
Norman Maurer
437a9403b0 Fix inspector warnings 2014-01-15 17:18:19 +01:00
Veebs
2df690b0e4 Add HttpChunkedInput for easier streaming of chunked content 2014-01-15 17:18:19 +01:00
Trustin Lee
f66be21ee3 Use the source frame's allocator instead of the unpooled allocator 2014-01-14 14:22:37 +09:00
Trustin Lee
febc53daaa Port the changes in SpdyHeaderBlockRawDecoder to master & 4.0
Somehow it slipped away.
2014-01-13 23:08:07 +09:00
Trustin Lee
b8de47484a Port the changes in SpdyHeaderBlockZlibEncoder to master & 4.0
Somehow it slipped away.
2014-01-13 23:00:41 +09:00
Trustin Lee
cead74f84d Fix checkstyle 2014-01-13 22:57:34 +09:00
Trustin Lee
06cbac922a Fix a bug where SpdyHeaderBlockZlibDecoder fails to decompress
- Forward-port 4c35b593c1, originally written by @wgallagher
- Fixes #2077
2014-01-13 22:42:24 +09:00
Veebs
1326ba54ee Replaced deprecated 'sendUnsupportedWebSocketVersionResponse()' with 'sendUnsupportedVersionResponse()' 2014-01-13 06:33:57 +01:00
Norman Maurer
eca5613534 Cleanup and remove get prefix of method to be more inline with our API 2014-01-11 14:21:29 +01:00
Leonardo Freitas Gomes
3ce35c710a Improves SelectedProtocol enum to avoid boilerplate on subclasses
NPN server providers return a String version of the negotiated protocol
and the getProtocolByName method allows to easily get an instance of
the SelectedProtocol enum and avoid the need for a switch statement in
each subclass to match the String against the enum value.
2014-01-11 14:21:13 +01:00
Trustin Lee
8d431679d7 Fix a compilation error 2014-01-10 16:36:48 +09:00
Trustin Lee
b24494abeb Fix a bug where HttpObjectDecoder produces LastHttpContent after entering BAD_MESSAGE state
- Fixes #2103
- Added LastHttpContent.EMPTY_LAST_CONTENT.toString() for athestic reasons.
2014-01-10 16:17:08 +09:00
Norman Maurer
b9bbded84e [#2090] Correctly format DefaultHttpRequest#toString() 2014-01-06 17:34:46 +01:00
Norman Maurer
7d90c5b756 [#2088] Introduce sendUnsupportedVersionResponse(...) methods which allows to use the ChannelFuture/ChannelPromise to get notified once the response was send.
Also mark the old method as deprecated.
2014-01-03 11:11:08 +01:00
Trustin Lee
e83d2e0b4e [maven-release-plugin] prepare for next development iteration 2013-12-22 21:57:48 +09:00
Trustin Lee
cdb700c7a4 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:57:40 +09:00
Trustin Lee
0b7aedb13b [maven-release-plugin] rollback the release of netty-4.0.14.Final 2013-12-22 21:53:24 +09:00
Trustin Lee
4bf6ec7171 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:52:56 +09:00
Trustin Lee
9c1a49c58e [maven-release-plugin] rollback the release of netty-4.0.14.Final 2013-12-22 21:47:35 +09:00
Trustin Lee
008a049bf4 [maven-release-plugin] prepare for next development iteration 2013-12-22 21:43:55 +09:00
Trustin Lee
f6cb9088c6 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:43:45 +09:00
Trustin Lee
dd49b1cfac Use LinkedHashSet for HttpHeaders.names() and add Javadoc about the performance of names() and entries() 2013-12-22 19:17:27 +09:00
Trustin Lee
47d0a85720 Fix a leak in HttpResponseDecoderTest 2013-12-19 01:13:30 +09:00