Commit Graph

371 Commits

Author SHA1 Message Date
Norman Maurer
28d03adbfe [maven-release-plugin] prepare for next development iteration 2016-03-21 11:51:50 +01:00
Norman Maurer
4653dc1d05 [maven-release-plugin] prepare release netty-4.1.0.CR4 2016-03-21 11:51:12 +01:00
Scott Mitchell
8dbf5d02e5 EPOLL SO_LINGER=0 sends FIN+RST
Motivation:
If SO_LINGER is set to 0 the EPOLL transport will send a FIN followed by a RST. This is not consistent with the behavior of the NIO transport. This variation in behavior can cause protocol violations in streaming protocols (e.g. HTTP) where a FIN may be interpreted as a valid end to a data stream, but RST may be treated as the data is corrupted and should be discarded.

https://github.com/netty/netty/issues/4170 Claims the behavior of NIO always issues a shutdown when close occurs. I could not find any evidence of this in Netty's NIO transport nor in the JDK's SocketChannel.close() implementation.

Modifications:
- AbstractEpollChannel should be consistent with the NIO transport and not force a shutdown on every close
- FileDescriptor to keep state in a consistent manner with the JDK and not allow a shutdown after a close
- Unit tests for NIO and EPOLL to ensure consistent behavior

Result:
EPOLL is capable of sending just a RST to terminate a connection.
2016-03-16 22:35:04 -07:00
Tibor Csögör
6e840d8e62 trivial javadoc fixes
- fix the formatting of the diagram in ChannelFuture's javadoc
- update external link in AutobahnServer
- fix various spelling issues
2016-03-16 20:18:29 +01:00
Norman Maurer
ca443e42e0 [maven-release-plugin] prepare for next development iteration 2016-02-19 23:00:11 +01:00
Norman Maurer
f39eb9a6b2 [maven-release-plugin] prepare release netty-4.1.0.CR3 2016-02-19 22:59:52 +01:00
Norman Maurer
94f2748f1b Upgrade to netty-tcnative-1.1.33.Fork13
Motivation:

netty-tcnative-1.1.33.Fork was released, we should upgrade. Also we should skip renegotiate tests if boringssl is used because boringssl does not support renegotiation.

Modifications:

- Upgrade to netty-tcnative-1.1.33.Fork13
- Skip renegotiate tests if boringssl is used.

Result:

Use newest version of netty-tcnative and be able to build if boringssl is used.
2016-02-17 08:16:35 -08:00
Norman Maurer
75a2ddd61c [maven-release-plugin] prepare for next development iteration 2016-02-04 16:51:44 +01:00
Norman Maurer
7eb3a60dba [maven-release-plugin] prepare release netty-4.1.0.CR2 2016-02-04 16:37:06 +01:00
Norman Maurer
210ebe1354 Allow to specify tcnative artifactId and verion to allow run tests easily with different tcnative flavors
Motivation:

As we now can easily build static linked versions of tcnative it makes sense to run our netty build against all of them.
This helps to ensure our code works with libressl, openssl and boringssl.

Modifications:

Allow to specify -Dtcnative.artifactId= and -Dtcnative.version=

Result:

Easy to run netty build against different tcnative flavors.
2016-01-29 22:27:19 +01:00
Norman Maurer
1c417e5f82 [maven-release-plugin] prepare for next development iteration 2016-01-21 15:35:55 +01:00
Norman Maurer
c681a40a78 [maven-release-plugin] prepare release netty-4.1.0.CR1 2016-01-21 15:28:21 +01:00
Fabian Lange
619d82b56f Removed unused imports
Motivation:

Warnings in IDE, unclean code, negligible performance impact.

Modification:

Deletion of unused imports

Result:

No more warnings in IDE, cleaner code, negligible performance improvement.
2016-01-04 14:32:29 +01:00
Xiaoyan Lin
475d901131 Fix errors reported by javadoc
Motivation:

Javadoc reports errors about invalid docs.

Modifications:

Fix some errors reported by javadoc.

Result:

A lot of javadoc errors are fixed by this patch.
2015-12-27 08:36:45 +01:00
Norman Maurer
2ecce8fa56 [maven-release-plugin] prepare for next development iteration 2015-11-10 22:59:33 +01:00
Norman Maurer
6a93f331d3 [maven-release-plugin] prepare release netty-4.1.0.Beta8 2015-11-10 22:50:57 +01:00
Norman Maurer
2ff2806ada [maven-release-plugin] prepare for next development iteration 2015-10-02 09:03:29 +02:00
Norman Maurer
5a43de10f7 [maven-release-plugin] prepare release netty-4.1.0.Beta7 2015-10-02 09:02:58 +02:00
Norman Maurer
276613c63c Not use RC4 for renegation as it is not supported in more recent java versions.
Motivation:

RC4 is not supported by default in more recent java versions as RC4 is considered insecure. We should not use it in tests as these test will fail on more recent java version.

Modifications:

Use SSL_RSA_WITH_3DES_EDE_CBC_SHA for test.

Result:

Non failing test on more recent java versions.
2015-09-23 08:39:44 +02:00
nmittler
3ee44a3dbb Update Netty to latest netty-tcnative
Motivation:

The latest netty-tcnative fixes a bug in determining the version of the runtime openssl lib.  It also publishes an artificact with the classifier linux-<arch>-fedora for fedora-based systems.

Modifications:

Modified the build files to use the "-fedora" classifier when appropriate for tcnative. Care is taken, however, to not change the classifier for the native epoll transport.

Result:

Netty is updated the the new shiny netty-tcnative.
2015-09-18 12:07:21 -07:00
Norman Maurer
6e3acfeb06 Correctly throw SSLPeerUnverifiedException if peers identity has not been verified
Motivation:

As stated in the SSLSession javadocs getPeer* methods need to throw a SSLPeerUnverifiedException if peers identity has not be verified.

Modifications:

- Correctly throw SSLPeerUnverifiedException
- Add test for it.

Result:

Correctly behave like descripted in javadocs.
2015-09-15 09:57:45 +02:00
Michael Bildner
58dc7f7902 Do not bother closing SSL enging inbound if the outbound has already been closed.
Motivation:

Invoking the javax.net.ssl.SSLEngine.closeInbound() method will send a
fatal alert and invalidate the SSL session if a close_notify alert has
not been received.
From the javadoc:
If the application initiated the closing process by calling
closeOutbound(), under some circumstances it is not required that the
initiator wait for the peer's corresponding close message. (See section
7.2.1 of the TLS specification (RFC 2246) for more information on
waiting for closure alerts.) In such cases, this method need not be
called.
Always invoking the closeInbound() method without regard to whether or
not the closeOutbound() method has been invoked could lead to
invalidating perfectly valid SSL sessions.

Modifications:

Added an instance variable to track whether the
SSLEngine.closeOutbound() method has been invoked. When the instance
variable is true, the SSLEngine.closeInbound() method doesn't need to be
invoked.

Result:

SSL sessions will not be invalidated if the outbound side has been
closed but a close_notify alert hasn't been received.
2015-09-06 10:00:46 +02:00
Norman Maurer
34de2667c7 [maven-release-plugin] prepare for next development iteration 2015-09-02 11:45:20 +02:00
Norman Maurer
2eb444ec1d [maven-release-plugin] prepare release netty-4.1.0.Beta6 2015-09-02 11:36:11 +02:00
Scott Mitchell
b6a4f5de9d Refactor of HttpUtil and HttpHeaderUtil
Motivation:
There currently exists http.HttpUtil, http2.HttpUtil, and http.HttpHeaderUtil. Having 2 HttpUtil methods can be confusing and the utilty methods in the http package could be consolidated.

Modifications:
- Rename http2.HttpUtil to http2.HttpConversionUtil
- Move http.HttpHeaderUtil methods into http.HttpUtil

Result:
Consolidated utilities whose names don't overlap.
Fixes https://github.com/netty/netty/issues/4120
2015-08-27 08:49:58 -07:00
Norman Maurer
5ac84760c4 Allow to create SslContext from existing PrivateKey / X509Certificate
Motivation:

Sometimes the user already has a PrivateKey / X509Certificate which should be used to create a new SslContext. At the moment we only allow to construct it via Files.

Modifications:

- Add new methods to the SslContextBuilder to allow creating a SslContext from PrivateKey / X509Certificate
- Mark all public constructors of *SslContext as @Deprecated, the user should use SslContextBuilder
- Update tests to us SslContextBuilder.

Result:

Creating of SslContext is possible with PrivateKay/X509Certificate
2015-08-12 15:05:58 +02:00
Norman Maurer
c3ab557f85 [#3987] Remove RC4 from default ciphers.
Motivation:

Remove RC4 from default ciphers as it is not known as secure anymore.

Modifications:

Remove RC4

Result:

Not use an insecure cipher as default.
2015-07-22 13:29:43 +02:00
Trustin Lee
5d11be58ea More meaningful assertion failure message
We see sporadic failure in EpollSocketConnectionAttemptTest. Generate
more useful failure message using hamcrest to know more.
2015-06-04 12:08:30 +09:00
Trustin Lee
4d79be44ef Fix sporadic failures in DatagramUnicastTest
Motivation:

DatagramUnitcastTest sometimes fails with BindException for an unknown reason.

Modifications:

Retry up to 3 times with a new free port when bind() fails with BindException

Result:

More build stability
2015-06-01 17:33:06 +09:00
Trustin Lee
c7b164b409 Fix sporadic assertion failure in SocketSslEchoTest
Motivation:

SocketSslEchoTest.testSslEcho() has a race condition where a renegotiation future can be done before:

    assertThat(renegoFuture.isDone(), is(false));

Modifications:

Remove the offending assertion.

Result:

More build stability
2015-06-01 13:56:47 +09:00
Norman Maurer
f2ba221e7e [#3785] Correctly handle connection refused with native transport
Motivation:

Due a bug we not correctly handled connection refused errors and so failed the connect promise with the wrong exception.
Beside this we some times even triggered fireChannelActive() which is not correct.

Modifications:

- Add testcase
- correctly detect connect errors

Result:

Correct and consistent handling.
2015-05-27 13:38:50 +02:00
Norman Maurer
f23b7b4efd [maven-release-plugin] prepare for next development iteration 2015-05-07 14:21:08 -04:00
Norman Maurer
871ce43b1f [maven-release-plugin] prepare release netty-4.1.0.Beta5 2015-05-07 14:20:38 -04:00
Norman Maurer
f963401d42 Allow rejection of remote initiated renegotiation
Motivation:

To prevent from DOS attacks it can be useful to disable remote initiated renegotiation.

Modifications:

Add new flag to OpenSslContext that can be used to disable it
Adding a testcase

Result:

Remote initiated renegotion requests can be disabled now.
2015-05-07 14:41:25 +02:00
Norman Maurer
b0a30cbf39 Fix race-condition in SocketSslEchoTest
Motivation:

Because we tried to grab the SSL renegotation future to early we could see test-failures.

Modifications:

Access the future at the correct time.

Result:

No more test-failures.
2015-05-06 06:25:25 +02:00
Trustin Lee
abaaa75ddc Reduce the memory requirement of heap dump compression
Motivation:

The current heap dump compression preset (9) requires way too much
memory (768 MiB at maximum for dictionary), resulting in OOME in many
cases.

Modifications:

- Use the default preset (6) which uses 8 MiB dictionary.
- Do not fail abruptly even when OOME has been raised.

Result:

More stable heap dump acquisition
2015-05-01 11:56:53 +09:00
Trustin Lee
518119d7c0 Fix the flaky SocketSslEchoTest
Motivation:

The SSL peer who did not initiate renegotiation sometimes does not get
the notification for renegotition due to an unknown reason.

Modification:

Until the exact cause is understood, relax the assertions of the flaky
tests.

Result:

Build stability
2015-05-01 11:48:02 +09:00
Ben Evans
6c025b2044 Add support for SCTP 'unordered' flag.
Motivation:

Some SCTP applications require the SCTP unordered flag.
This flag was not exposed by Netty so applications were unable
to use it.

Modifications:

- Add unordered flag to SctpMessage.
- {Nio,Oio}SctpChannel pass unordered flag to MessageInfo on write.
- SctpOutboundByteStreamHandler may optionally request unordered
  delivery for all outbound messages.
- Added test case to SctpEchoTest using unordered flag.

Result:

Fixes #3698. New constructors and methods added to SctpMessage and
SctpOutboundByteStreamHandler, but changes are backward compatible.
2015-04-30 08:46:07 +02:00
Norman Maurer
77e112a6d5 Correctly test for non-auto-read correctness in testsuite
Motiviation:

Our tests for non-auto-read did actually not test this correctly as auto-read was never disabled on the Bootstrap and ServerBootstrap.

Modifications:

- Correctly disable auto-read on Bootstrap and ServerBootstrap
- Fix tests to call ChannelHandlerContext.read() once a Channel becomes active.

Result:

Correctly test that non-auto-read works.
2015-04-20 09:10:55 +02:00
Norman Maurer
fce0989844 [maven-release-plugin] prepare for next development iteration 2015-03-03 02:06:47 -05:00
Norman Maurer
ca3b1bc4b7 [maven-release-plugin] prepare release netty-4.1.0.Beta4 2015-03-03 02:05:52 -05:00
Norman Maurer
afa9e71ed3 Allow to use WebSocketClientHandshaker and WebSocketServerHandshaker with HttpResponse / HttpRequest
Motivation:

To use WebSocketClientHandshaker / WebSocketServerHandshaker it's currently a requirement of having a HttpObjectAggregator in the ChannelPipeline. This is not a big deal when a user only wants to server WebSockets but is a limitation if the server serves WebSockets and normal HTTP traffic.

Modifications:

Allow to use WebSocketClientHandshaker and WebSocketServerHandshaker without HttpObjectAggregator in the ChannelPipeline.

Result:

More flexibility
2015-02-06 10:46:07 +01:00
Norman Maurer
f771a97592 Add support for Unix Domain Sockets when using native epoll transport
Motivation:

Using Unix Domain Sockets can be very useful when communication should take place on the same host and has less overhead then using loopback. We should support this with the native epoll transport.

Modifications:

- Add support for Unix Domain Sockets.
- Adjust testsuite to be able to reuse tests.

Result:

Unix Domain Sockets are now support when using native epoll transport.
2015-02-04 15:39:41 +01:00
Trustin Lee
1173699dff Enable client-side OpenSSL in SocketSslEchoTest 2014-12-30 23:56:31 +09:00
Frederic Bregier
2681112080 Fix big transfer and Write traffic shaping issues
Motivation:

Several issues were shown by various ticket (#2900 #2956).
Also use the improvement on writability user management from #3036.
And finally add a mixte handler, both for Global and Channels, with
the advantages of being uniquely created and using less memory and
less shaping.

Issue #2900

When a huge amount of data are written, the current behavior of the
TrafficShaping handler is to limit the delay to 15s, whatever the delay
the previous write has. This is wrong, and when a huge amount of writes
are done in a short time, the traffic is not correctly shapened.

Moreover, there is a high risk of OOM if one is not using in his/her own
handler for instance ChannelFuture.addListener() to handle the write
bufferisation in the TrafficShapingHandler.

This fix use the "user-defined writability flags" from #3036 to
allow the TrafficShapingHandlers to "user-defined" managed writability
directly, as for reading, thus using the default isWritable() and
channelWritabilityChanged().
This allows for instance HttpChunkedInput to be fully compatible.

The "bandwidth" compute on write is only on "acquired" write orders, not
on "real" write orders, which is wrong from statistic point of view.

Issue #2956

When using GlobalTrafficShaping, every write (and read) are
synchronized, thus leading to a drop of performance.
ChannelTrafficShaping is not touched by this issue since synchronized is
then correct (handler is per channel, so the synchronized).

Modifications:
The current write delay computation takes into account the previous
write delay and time to check is the 15s delay (maxTime) is really
exceeded or not (using last scheduled write time). The algorithm is
simplified and in the same time more accurate.

This proposal uses the #3036 improvement on user-defined writability
flags.

When the real write occurs, the statistics are update accordingly on a
new attribute (getRealWriteThroughput()).

To limit the synchronisations, all synchronized on
GlobalTrafficShapingHandler on submitWrite were removed. They are
replaced with a lock per channel (since synchronization is still needed
to prevent unordered write per channel), as in the sendAllValid method
for the very same reason.
Also all synchronized on TrafficCounter on read/writeTimeToWait() are
removed as they are unnecessary since already locked before by the
caller.
Still the creation and remove operations on lock per channel (PerChannel
object) are synchronized to prevent concurrency issue on this critical
part, but then limited.

Additionnal changes:
1) Use System.nanoTime() instead of System.currentTimeMillis() and
minimize calls
2) Remove / 10 ° 10 since no more sleep usage
3) Use nanoTime instead of currentTime such that time spend is computed,
not real time clock. Therefore the "now" relative time (nanoTime based)
is passed on all sub methods.
4) Take care of removal of the handler to force write all pending writes
and release read too
8) Review Javadoc to explicit:

- recommandations to take into account isWritable

- recommandations to provide reasonable message size according to
traffic shaping limit

- explicit "best effort" traffic shaping behavior when changing
configuration dynamically

Add a MixteGlobalChannelTrafficShapingHandler which allows to use only one
handler for mixing Global and Channel TSH. I enables to save more memory and
tries to optimize the traffic among various channels.

Result:
The traffic shaping is more stable, even with a huge number of writes in
short time by taking into consideration last scheduled write time.

The current implementation of TrafficShapingHandler using user-defined
writability flags and default isWritable() and
fireChannelWritabilityChanged works as expected.

The statistics are more valuable (asked write vs real write).

The Global TrafficShapingHandler should now have less "global"
synchronization, hoping to the minimum, but still per Channel as needed.

The GlobalChannel TrafficShapingHandler allows to have only one handler for all channels while still offering per channel in addition to global traffic shaping.

And finally maintain backward compatibility.
2014-12-29 15:47:06 +09:00
Norman Maurer
682df517c9 Add OpenSslClientContext to allow creating SslEngine for client side
Motivation:

We only support openssl for server side at the moment but it would be also useful for client side.

Modification:

* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC

Result:

openssl can be used for client and servers now.
2014-12-22 19:38:30 +01:00
Trustin Lee
563bf24424 Do not use SLF4J/Logback API directly
Motivation:

TrafficShapingHandlerTest uses Logback API directly, which is
discouraged.  Also, it overrides the global default log level, which
silences the DEBUG messages from other tests.

Modifications:

Remove the direct use of Logback API

Result:

The tests executed after TrafficShapingHandlerTest logs their DEBUG
messages correctly.
2014-12-17 10:15:52 +09:00
Trustin Lee
4f7632a853 Fix checkstyle 2014-12-16 20:34:18 +09:00
Trustin Lee
98a2bb62f5 Log detailed information about renegotiation and traffic
Motivation:

We need more information to understand why SocketSslEchoTest fails
sporadically in the CI machine.

Modifications:

- Refactor SocketSslEchoTest so that it is easier to retrieve the
  information about renegotiation and the current progress

Result:

We will get more information when the test fails.
2014-12-16 17:45:21 +09:00
Trustin Lee
c7b407e288 Compress the heap dump after tests are finished
Motivation:

Tests sometimes time out because it took too long to compress the
generated heap dump.

Modifications:

- Move the compression logic to a new method 'compressHeapDumps()'
- Call TestUtils.compressHeapDumps() at the end of the tests, so that
  the tests do not fail because of timeout

Result:

JUnit reports the real cause of the test failure instead of timeout
exception.
2014-12-16 16:16:17 +09:00