Commit Graph

1352 Commits

Author SHA1 Message Date
Trustin Lee
3921f7c88a Reduce the perceived time taken to retrieve initialSeedUniquifier
Motivation:

When system is in short of entrophy, the initialization of
ThreadLocalRandom can take at most 3 seconds.  The initialization occurs
when ThreadLocalRandom.current() is invoked first time, which might be
much later than the moment when the application has started.  If we
start the initialization of ThreadLocalRandom as early as possible, we
can reduce the perceived time taken for the retrieval.

Modification:

Begin the initialization of ThreadLocalRandom in InternalLoggerFactory,
potentially one of the firstly initialized class in a Netty application.

Make DefaultChannelId retrieve the current process ID before retrieving
the current machine ID, because retrieval of a machine ID is more likely
to use ThreadLocalRandom.current().

Use a dummy channel ID for EmbeddedChannel, which prevents many unit
tests from creating a ThreadLocalRandom instance.

Result:

We gain extra 100ms at minimum for initialSeedUniquifier generation.  If
an application has its own initialization that takes long enough time
and generates good amount of entrophy, it is very likely that we will
gain a lot more.
2014-07-04 16:04:37 +09:00
Norman Maurer
9c4a733471 [#2586] Use correct EventLoop to notify delayed bind failures
Motivation:

When a bind fails AbstractBootstrap will use the GlobalEventExecutor to notify the ChannelPromise. We should use the EventLoop of the Channel if possible.

Modification:

Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.

Result:

Use the correct EventLoop for notification
2014-07-03 21:31:27 +02:00
Norman Maurer
2438ec5e24 [#2618] Introduce ChannelPromise.unvoid() and ChannelFuture.isVoid()
Motivation:

There is no way for a ChannelHandler to check if the passed in ChannelPromise for a write(...) call is a VoidChannelPromise. This is a problem as some handlers need to add listeners to the ChannelPromise which is not possible in the case of a VoidChannelPromise.

Modification:

- Introduce ChannelFuture.isVoid() which will return true if it is not possible to add listeners or wait on the result.
- Add ChannelPromise.unvoid() which allows to create a ChannelFuture out of a void ChannelFuture which supports all the operations.

Result:

It's now easy to write ChannelHandler implementations which also works when a void ChannelPromise is used.
2014-07-03 14:16:46 +02:00
Trustin Lee
330404da07 Fix most inspector warnings
Motivation:

It's good to minimize potentially broken windows.

Modifications:

Fix most inspector warnings from our profile

Result:

Cleaner code
2014-07-02 19:04:11 +09:00
Norman Maurer
887838a06b Correctly return from selector loop one a scheduled task is ready for processing
Motivation:

We use the nanoTime of the scheduledTasks to calculate the milli-seconds to wait for a select operation to select something. Once these elapsed we check if there was something selected or some task is ready for processing. Unfortunally we not take into account scheduled tasks here so the selection loop will continue if only scheduled tasks are ready for processing. This will delay the execution of these tasks.

Modification:

- Check if a scheduled task is ready after selecting
- also make a tiny change in NioEventLoop to not trigger a rebuild if nothing was selected because the timeout was reached a few times in a row.

Result:

Execute scheduled tasks on time.
2014-07-02 09:10:49 +02:00
Michael Klishin
c8b170e9eb Correct a JavaDoc typo 2014-06-28 21:44:48 +02:00
Norman Maurer
0ee7f9764e Cleanup comment / code 2014-06-27 21:37:21 +02:00
Norman Maurer
dbd041efc1 [#2615] Correctly update SelectionKey after selector rebuild
Motivation:

When a select rebuild was triggered the reference to the SelectionKey is not updated in AbstractNioChannel. This will cause a CancelledKeyException later.

Modification:

Correctly update SelectionKey reference after rebuild

Result:

Fix exception
2014-06-27 17:21:48 +02:00
onlychoice
7195acd78b Fix a typo in comment 2014-06-24 11:01:24 +02:00
Norman Maurer
580965f775 Improve performance of Recycler
Motivation:

Recycler is used in many places to reduce GC-pressure but is still not as fast as possible because of the internal datastructures used.

Modification:

 - Rewrite Recycler to use a WeakOrderQueue which makes minimal guaranteer about order and visibility for max performance.
 - Recycling of the same object multiple times without acquire it will fail.
 - Introduce a RecyclableMpscLinkedQueueNode which can be used for MpscLinkedQueueNodes that use Recycler

These changes are based on @belliottsmith 's work that was part of #2504.

Result:

Huge increase in performance.

4.0 branch without this commit:

Benchmark                                                (size)   Mode   Samples        Score  Score error    Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    00000  thrpt        20 116026994.130  2763381.305    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    00256  thrpt        20 110823170.627  3007221.464    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    01024  thrpt        20 118290272.413  7143962.304    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    04096  thrpt        20 120560396.523  6483323.228    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    16384  thrpt        20 114726607.428  2960013.108    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    65536  thrpt        20 119385917.899  3172913.684    ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.617 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark

4.0 branch with this commit:

Benchmark                                                (size)   Mode   Samples        Score  Score error    Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    00000  thrpt        20 204158855.315  5031432.145    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    00256  thrpt        20 205179685.861  1934137.841    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    01024  thrpt        20 209906801.437  8007811.254    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    04096  thrpt        20 214288320.053  6413126.689    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    16384  thrpt        20 215940902.649  7837706.133    ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread    65536  thrpt        20 211141994.206  5017868.542    ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.648 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark
2014-06-24 10:57:35 +02:00
Norman Maurer
fa5e602238 [#2589] LocalServerChannel.doClose() throws NPE when localAddress == null
Motivation:

LocalServerChannel.doClose() calls LocalChannelRegistry.unregister(localAddress); without check if localAddress is null and so produce a NPE when pass null the used ConcurrentHashMapV8

Modification:
Check for localAddress != null before try to remove it from Map. Also added a unit test which showed the stacktrace of the error.

Result:

No more NPE during doClose().
2014-06-20 20:13:50 +02:00
Norman Maurer
f341562b91 [#2586] Use correct EventLoop to notify delayed successful registration
Motivation:

At the moment AbstractBoostrap.bind(...) will always use the GlobalEventExecutor to notify the returned ChannelFuture if the registration is not done yet. This should only be done if the registration fails later. If it completes successful we should just notify with the EventLoop of the Channel.

Modification:

Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.

Result:

Use the correct EventLoop for notification
2014-06-20 17:05:54 +02:00
Trustin Lee
760bbc7ea6 Refactor FastThreadLocal to simplify TLV management
Motivation:

When Netty runs in a managed environment such as web application server,
Netty needs to provide an explicit way to remove the thread-local
variables it created to prevent class loader leaks.

FastThreadLocal uses different execution paths for storing a
thread-local variable depending on the type of the current thread.
It increases the complexity of thread-local removal.

Modifications:

- Moved FastThreadLocal and FastThreadLocalThread out of the internal
  package so that a user can use it.
- FastThreadLocal now keeps track of all thread local variables it has
  initialized, and calling FastThreadLocal.removeAll() will remove all
  thread-local variables of the caller thread.
- Added FastThreadLocal.size() for diagnostics and tests
- Introduce InternalThreadLocalMap which is a mixture of hard-wired
  thread local variable fields and extensible indexed variables
- FastThreadLocal now uses InternalThreadLocalMap to implement a
  thread-local variable.
- Added ThreadDeathWatcher.unwatch() so that PooledByteBufAllocator
  tells it to stop watching when its thread-local cache has been freed
  by FastThreadLocal.removeAll().
- Added FastThreadLocalTest to ensure that removeAll() works
- Added microbenchmark for FastThreadLocal and JDK ThreadLocal
- Upgraded to JMH 0.9

Result:

- A user can remove all thread-local variables Netty created, as long as
  he or she did not exit from the current thread. (Note that there's no
  way to remove a thread-local variable from outside of the thread.)
- FastThreadLocal exposes more useful operations such as isSet() because
  we always implement a thread local variable via InternalThreadLocalMap
  instead of falling back to JDK ThreadLocal.
- FastThreadLocalBenchmark shows that this change improves the
  performance of FastThreadLocal even more.
2014-06-19 21:17:46 +09:00
Norman Maurer
55b6f7129c Small improvement in SimpleChannelInboundHandlerAdapter javadoc 2014-06-18 14:49:50 +02:00
Norman Maurer
9160ceb921 Make use of AtomicLongFieldUpdater.addAndGet(...) for cleaner code
Motivation:

The code in ChannelOutboundBuffer can be simplified by using AtomicLongFieldUpdater.addAndGet(...)

Modification:

Replace our manual looping with AtomicLongFieldUpdater.addAndGet(...)

Result:

Cleaner code
2014-06-17 20:15:44 +02:00
Norman Maurer
fe91aea655 [#2577] ChannelOutboundBuffer.addFlush() unnecessary loop through all entries on multiple calls
Motivation:

If ChannelOutboundBuffer.addFlush() is called multiple times and flushed != unflushed it will still loop through all entries that are not flushed yet even if it is not needed anymore as these were marked uncancellable before.

Modifications:

Check if new messages were added since addFlush() was called and only if this was the case loop through all entries and try to mark the uncancellable.

Result:

Less overhead when ChannelOuboundBuffer.addFlush() is called multiple times without new messages been added.
2014-06-17 09:32:14 +02:00
belliottsmith
7d37af5dfb Introduce FastThreadLocal which uses an EnumMap and a predefined fixed set of possible thread locals
Motivation:
Provide a faster ThreadLocal implementation

Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);

Result:
Improved performance
2014-06-13 11:02:16 +02:00
Norman Maurer
6b17aaad71 Optimize DefaultChannelPipeline in terms of memory usage and initialization time
Motivation:
Each of DefaultChannelPipeline instance creates an head and tail that wraps a handler. These are used to chain together other DefaultChannelHandlerContext that are created once a new ChannelHandler is added. There are a few things here that can be improved in terms of memory usage and initialization time.

Modification:
- Only generate the name for the tail and head one time as it will never change anyway
- Only compute the skipFlags for the tail and head one time as it will never change
- Rename DefaultChannelHandlerContext to AbstractChannelHandlerContext and make it abstract
- Create a new DefaultChannelHandlerContext that is used when a ChannelHandler is added to the DefaultChannelPipeline
- Rename TailHandler to TailContext and HeadHandler to HeadContext and let them extend AbstractChannelHandlerContext. This way we can save 2 object creations per DefaultChannelPipeline

Result:
- Less memory usage because we have 2 less objects per DefaultChannelPipeline
- Faster creation of DefaultChannelPipeline as we not need to compute the skipFlags and not need to generate the name for the head and tail
2014-06-10 10:01:40 +02:00
Norman Maurer
4666ac08d0 ChannelFlushPromiseNotifier should allow long value for pendingDataSize
Motivation:
At the moment ChannelFlushPromiseNotifier.add(....) takes an int value for pendingDataSize, which may be too small as a user may need to use a long. This can for example be useful when a user writes a FileRegion etc. Beside this the notify* method names are kind of missleading as these should not contain *Future* because it is about ChannelPromises.

Modification:
Alter add(...) method to take a long for pendingDataSize. Rename all *Future* methods to have *Promise* in the method name to better reflect usage.

Result:
ChannelFlushPromiseNotifier can be used with bigger data.
2014-06-03 17:39:41 +02:00
Korotaev Boris
cde667f668 Fix broken CompositeMatcher
Motivation:

ChannelMatchers#CompositeMatcher inverts matches result.

Modifications:

Switched return values.

Result:

ChannelMatchers#CompositeMatcher will return correct results.
2014-06-01 13:14:01 +02:00
Frédéric Brégier
e1abfbb6c1 Correction on StringBuilder default init size
Motivation:
The default StringBuilder size is too small (data.length + 4) while it will be 2*data.length (byte to Hex) + 5 "-" char (since 5 peaces appended).

Modification:
Changing initial size to the correct one

Result:
Allocation of the correct final size from the beginning for this StringBuilder.
2014-05-30 07:33:38 +02:00
Trustin Lee
d90207b3ac Work around the system configuration issue that causes NioSocketChannelTest to fail
Motivation:

On some ill-configured systems, InetAddress.getLocalHost() fails.  NioSocketChannelTest calls java.net.Socket.connect() and it internally invoked InetAddress.getLocalHost(), which causes the test failures in NioSocketChannelTes on such an ill-configured system.

Modifications:

Use NetUtil.LOCALHOST explicitly.

Result:

NioSocketChannelTest should not fail anymore.
2014-05-28 09:38:42 +09:00
Trustin Lee
53e35480f0 Fix a regression introduced by 00853d9453
.. by fixing incorrect bitwise operation for pipeline traversal
2014-05-23 01:15:41 +09:00
Trustin Lee
00853d9453 Fix an event ordering issue
Motivation:

In the early days of 5.0, we merged ChannelInboundHandler and
ChannelOutboundHandler into ChannelHandler, and introduced the
annotation called 'Skip'.  The annotation 'Skip' was introduced to
determine which handler methods are no-op (i.e. simply forwarding the
event to the next handler) so that DefaultChannelHandlerContext doesn't
even need to submit an event-invoking task to an EventExecutor,
significantly reducing the context switches.

However, this introduced a regression for the handlers which implemented
write() but not flush(). Because flush() was skippable for such
handlers, flush() event went through to the next handler before write() does.

To address this problem, we came up with a naive workaround that sets
MASK_FLUSH when MASK_WRITE is set.

Although the previous workaround works fine for many cases, we still
seem to have an event ordering problem.  We keep seeing the intermittant
failure of LocalTransportThreadModelTest.testStagedExecution(), because
other handler methods are still skipped.

Modifications:

We do not skip the execution of handler methods annotated with 'Skip'
unless all inbound methods (or all outbound methods) are marked with
'Skip'.

Result:

This change Brings back the event ordering behavior of 4.x, making
LocalTransportThreadModelTest.testStagedExecution() pass.
2014-05-22 11:14:36 +09:00
Norman Maurer
c3bd7a8ff1 Better implementation of AttributeMap and also add hasAttr(...). See [#2439]
Motivation:
The old DefaultAttributeMap impl did more synchronization then needed and also did not expose a efficient way to check if an attribute exists with a specific key.

Modifications:
* Rewrite DefaultAttributeMap to not use IdentityHashMap and synchronization on the map directly. The new impl uses a combination of AtomicReferenceArray and synchronization per chain (linked-list). Also access the first Attribute per bucket can be done without any synchronization at all and just uses atomic operations. This should fit for most use-cases pretty weel.
* Add hasAttr(...) implementation

Result:
It's now possible to check for the existence of a attribute without create one. Synchronization is per linked-list and the first entry can even be added via atomic operation.
2014-05-15 06:47:58 +02:00
Norman Maurer
706db46b7e [#2485] Use RecvByteBufAllocator for all allocations related to read from Channel
Motivation:
At the moment we sometimes use only RecvByteBufAllocator.guess() to guess the next size and the use the ByteBufAllocator.* directly to allocate the buffer. We should always use RecvByteBufAllocator.allocate(...) all the time as this makes the behavior easier to adjust.

Modifications:
Change the read() implementations to make use of RecvByteBufAllocator.

Result:
Behavior is more consistent.
2014-05-10 15:21:25 +02:00
Norman Maurer
aba9c552cd [#2454] Correctly return null when DefaultChannelPipeline.firstContext() is called on empty pipeline
Motivation:
DefaultChannelPipeline.firstContext() should return null when the ipeline is empty. This is not the case atm.

Modification:
Fix incorrect check in DefaultChannelPipeline.firstContext() and add unit tests.

Result:
Correctly return null when DefaultChannelPipeline.firstContext() is called on empty pipeline.
2014-05-04 21:13:56 +02:00
Norman Maurer
9b147c9724 Not cause busy loop when interrupt Thread of NioEventLoop
Motivation:
Because Thread.currentThread().interrupt() will unblock Selector.select() we need to take special care when check if we need to rebuild the Selector. If the unblock was caused by the interrupt() we will clear it and move on as this is most likely a bug in a custom ChannelHandler or a library the user makes use of.

Modification:
Clear the interrupt state of the Thread if the Selector was unblock because of an interrupt and the returned keys was 0.

Result:
No more busy loop caused by Thread.currentThread().interrupt()
2014-04-28 08:19:18 +02:00
Norman Maurer
1b8f34f2a6 Eliminate unnecessary extra synchronization in DefaultChannelPipeline
Motivation:
At the moment whenever we add/remove a ChannelHandler with an EventExecutorGroup we have two synchronization points in the execution path. One to find the childInvoker and one for add/remove itself. We can eliminate the former by call findIInvoker in the synchronization block, as we need to synchronize anyway.

Modification:
Remove the usage of AtomicFieldUpdater and the extra synchronization in findInvoker by moving the call of the method in the synchronized(this) block.

Result:
Less synchronization points and volatile reads/writes
2014-04-25 14:14:42 +02:00
Trustin Lee
18184c75de Undeprecate deregister() and chanelUnregistered()
Motivation:

As discussed in #2250, it will become much less complicated to implement
deregistration and reregistration of a channel once #2250 is resolved.
Therefore, there's no need to deprecate deregister() and
channelUnregistered().

Modification:

- Undeprecate deregister() and channelUnregistered()
- Remove SuppressWarnings annotations where applicable

Result:

We (including @jakobbuchgraber) are now ready to play with #2250 at
master
2014-04-25 16:50:54 +09:00
Trustin Lee
2d9735817c Synchronized between 4.1 and master (part 3)
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-25 16:17:16 +09:00
Trustin Lee
28742b91a5 Fix compilation errors 2014-04-25 15:15:16 +09:00
Trustin Lee
872d4c5bc1 Synchronized between 4.1 and master again (part 2)
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.

Result:
4.1 and master got closer.
2014-04-25 15:07:12 +09:00
Norman Maurer
8a7d8a8ab7 Remove unused method to match up 4.1 branch
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Remove ChannelHandlerInvokerUtil.invokeWriteAndFlush(...) as it is not used anyway and not exists in 4.1

Result:

4.1 and master got closer.
2014-04-24 21:31:13 +02:00
Norman Maurer
7fa861ab70 Synchronized between 4.1 and master
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-24 20:47:26 +02:00
Trustin Lee
d2614cfc01 Synchronized between 4.1 and master
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-25 00:36:01 +09:00
Norman Maurer
48f2e705d9 Resurrect channel deregistration and constructor changes
Motivation:

Due to the complexity of handling deregistration and re-registration of
a channel, we previously decided to remove the deregister() operation
completely to simplify our code.  However, we realized that it shouldn't
be that complicated to implement it during our discussion about making
I/O scheduling more flexible and more customizable [1], and thus the
removal of deregistration and re-registration is unnecessary now.

Modification:

- Revert commit c149f4bcc0
- Revert commit e743a27e75
- Make some additional adjustments

Result:

- deregister(), fireChannelUnregistered(), and channelRegistered() were
  added back..
- Channel constructors do not require an EventLoop anymore.

[1] https://github.com/netty/netty/issues/2250
2014-04-24 20:54:50 +09:00
Norman Maurer
1a8a2cac13 Make NioSocketChannelTest more bullet-proof
Motivation:
I had the NioSocketChannelTest.testFlushCloseReentrance() fail sometimes on one of my linux installation. This change let it pass all the time.

Modification:
Set the SO_SNDBUF to a small value to force split writes

Result:
Test is passing all the time where it was sometimes fail before.
2014-04-23 10:05:27 +02:00
Norman Maurer
59a1d29aa0 [#2400] Not close LocalChannel during deregister()
Motivation:
At the moment it is not possible to deregister a LocalChannel without close it.

Modification:
Not close the LocalChannel during dergister

Result:
It will be possible in the future to deregister a LocalChannel and register it to another EventLoop
2014-04-21 10:28:50 +02:00
Norman Maurer
bb063a9fdd Move validatePromise(...) to ChannelHandlerInvokerUtil. Related to [#2398]
Motivation:
Once a user implement a custom ChannelHandlerInvoker it is needed to validate the ChannelPromise. We should expose a utility method for this.

Modifications:
Move validatePromise(...) from DefaultChannelHandlerInvoker to ChannelHandlerInvokerUtil and make it public.

Result:
User is able to reuse code
2014-04-17 16:09:15 +02:00
Norman Maurer
dfd6b9009c [#2144] Fix NPE in Local transport caused by a race
Motivation:
At the moment it is possible to see a NPE when the LocalSocketChannels doRegister() method is called and the LocalSocketChannels doClose() method is called before the registration was completed.

Modifications:
Make sure we delay the actual close until the registration task was executed.

Result:
No more NPE
2014-04-17 15:19:23 +02:00
Norman Maurer
541abb8515 [#2375] [#2404] Fix bug in respecting ChannelConfig.setAutoRead(false) and also fix Channel.read() for OIO
Motivation:
At the moment ChanneConfig.setAutoRead(false) only is guaranteer to not have an extra channelRead(...) triggered when used from within the channelRead(...) or channelReadComplete(...) method. This is not the correct behaviour as it should also work from other methods that are triggered from within the EventLoop. For example a valid use case is to have it called from within a ChannelFutureListener, which currently not work as expected.

Beside this there is another bug which is kind of related. Currently Channel.read() will not work as expected for OIO as we will stop try to read even if nothing could be read there after one read operation on the socket (when the SO_TIMEOUT kicks in).

Modifications:
Implement the logic the right way for the NIO/OIO/SCTP and native transport, specific to the transport implementation. Also correctly handle Channel.read() for OIO transport by trigger a new read if SO_TIMEOUT was catched.

Result:
It is now also possible to use ChannelConfig.setAutoRead(false) from other methods that are called from within the EventLoop and have direct effect.
2014-04-17 08:19:20 +02:00
Norman Maurer
238af8cbd1 [#2390] Minimize memory usage of NioDatagramChannel
Motivation:
At the moment we create a HashMap that holds the MembershipKeys for multicast with every NioDatagramChannel even when most people not need it at al

Modifications:
Lazy create the HashMap when needed.

Result:
Less memory usage and less object creation
2014-04-15 06:56:33 +02:00
Norman Maurer
31a36e09ad [#2353] Use a privileged block to get ClassLoader and System property if needed
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.

Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .

Result:
Code works also when SecurityManager is present
2014-04-08 14:13:49 +02:00
Norman Maurer
cd579f75d2 [#2363] SelectedSelectionKeySet may hold strong reference to SelectionKey after Channel is closed
Motivation:
Because we not null out the array entry in the SelectionKey[] which is produced by SelectedSelectionKeySet.flip() we may end up with a few SelectionKeyreferences still hanging around here even after the Channel was closed. As these entries may be present at the end of the SelectionKey[] which is never updated for a long time as not enough SelectionKeys are ready.

Modifications:
Once we access the SelectionKey out of the SelectionKey[] we directly null it out.

Result:
Reference can be GC'ed right away once the Channel was closed.
2014-04-05 19:27:09 +02:00
Norman Maurer
db5285950b [#2362] AbstractChannel.AbstractUnsafe.write(...) is slow
Motivation:
At the moment we do a Channel.isActive() check in every AbstractChannel.AbstractUnsafe.write(...) call which gives quite some overhead as shown in the profiler when you write fast enough. We can eliminate the check and do something more smart here.

Modifications:
Remove the isActive() check and just check if the ChannelOutboundBuffer was set to null before, which means the Channel was closed. The rest will be handled in flush0() anyway.

Result:
Less overhead when doing many write calls
2014-04-04 09:55:01 +02:00
Norman Maurer
ce52b04d4f [#2349] Correctly handle cancelled ChannelPromise in DefaultChannelHandlerContext
Motivation:
At the moment an IllegalArgumentException will be thrown if a ChannelPromise is cancelled while propagate through the ChannelPipeline. This is not correct, we should just stop to propagate it as it is valid to cancel at any time.

Modifications:
Stop propagate the operation through the ChannelPipeline once a ChannelPromise is cancelled.

Result:
No more IllegalArgumentException when cancel a ChannelPromise while moving through the ChannelPipeline.
2014-03-31 08:46:51 +02:00
Daniel Bevenius
5d141242c9 Remove overridden next() method in EventLoop interface.
Motivation:
EventLoop overrides the next() method with the same signature of its
super class EventLoopGroup.

Modifications:
Remove the duplicate method declaration from the EventLoop interface.

Result:
Perhaps makes the API slightly more readable as there is one less
method.
2014-03-24 12:12:48 +09:00
CoNDoRip
d56e55d51d Allow specifying SelectorProvider when constructing an NIO channel #2311
Motivation:

At the moment we use the system-wide default selector provider for this invocation of the Java virtual machine when constructing a new NIO channel, which makes using an alternative SelectorProvider practically useless.
This change allows user specify his/her preferred SelectorProvider.

Modifications:

Add SelectorProvider as a param for current `private static *Channel newSocket` method of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel.
Change default constructors of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel to use DEFAULT_SELECTOR_PROVIDER when calling newSocket(SelectorProvider).
Add new constructors for NioSocketChannel, NioServerSocketChannel and NioDatagramChannel which allow user specify his/her preferred SelectorProvider.

Result:

Now users can specify his/her preferred SelectorProvider when constructing an NIO channel.
2014-03-23 16:20:16 +01:00
Trustin Lee
d641b6a97a Use the length of MAC address as the last property to compare to get the best MAC address
Motivation:

Some operating systems like Windows 7 uses a valid globally unique EUI-64 MAC address for a virtual device (e.g. 00:00:00:00:00:00:00:E0), and because it's usually longer than the legit MAC-48 address, we should not use the length of MAC address when two MAC addresses are of the same quality.  Instead, we should compare the INET address of the NICs before comparing the length of the MAC addresses.

Modification:

Compare the length of MAC addresses as a last resort.

Result:

Correct MAC address detection in Windows with IPv6 enabled.
2014-03-21 13:01:55 +09:00