Motivation:
Fix the regression recently introduced that causes already encoded responses to be encoded again as gzip
Modification:
instead of just looking for IDENTITY, anything set for Content-Encoding should be respected and left as-is
added unit tests to capture this use case
Result:
Fixes#6784
__Motivation__
`HttpClientCodec` skips HTTP decoding on the connection after a successful HTTP CONNECT response is received.
This behavior follows the spec for a client but pragmatically, if one creates a client to use a proxy transparently, the codec becomes useless after HTTP CONNECT.
Ideally, one should be able to configure whether HTTP CONNECT should result in pass-through or not. This will enable client writers to continue using HTTP decoding even after HTTP CONNECT.
__Modification__
Added overloaded constructors to accept `parseHttpPostConnect`. If this parameter is `true` then the codec continues decoding even after a successful HTTP CONNECT.
Also fixed a bug in the codec that was incrementing request count post HTTP CONNECT but not decrementing it on response. Now, the request count is only incremented if the codec is not `done`.
__Result__
Easier usage by HTTP client writers who wants to connect to a proxy but still decode HTTP for their users for subsequent requests.
Motivation:
Some JUnit assert calls can be replaced by simpler.
Modifications:
Replacement with a more suitable methods.
Result:
More informative JUnit reports.
Motivation:
HttpServerKeepAliveHandler throws unexpected error when I do ctx.writeAndFlush(msg, ctx.voidPromise()); where msg is with header "Connection:close".
Modification:
HttpServerKeepAliveHandler does promise.unvoid() before adding close listener.
Result:
No error for VoidChannelPromise with HttpServerKeepAliveHandler. Fixes [#6698].
Motivation:
It would be more flexible to make getCharset and getMimeType code usable not only for HttpMessage entity but just for any CharSequence. This will improve usability in general purpose code and will help to avoid multiple fetching of ContentType header from a message. It could be done in an external code once and CharSequence method versions could be applied.
Modification:
Expose HttpUtil#getMimeType, HttpUtil#getCharsetAsString, HttpUtil#getCharset versions which works with CharSequence. New methods are reused in the old ones which work with HttpMessage entity.
Result:
More flexible methods set with a good code reusing.
Motivation:
If Content-Encoding: IDENTITY is used we should not try to compress the http message but just let it pass-through.
Modifications:
Remove "!"
Result:
Fixes [#6689]
It is generally useful to have origin http servers respond to
"expect: continue-100" as soon as possible but applications without a
HttpObjectAggregator in their pipelines must use boiler plate to do so.
Modifications:
Introduce the HttpServerExpectContinueHandler handler to make it easier.
Result:
Less boiler plate for http application authors.
Motivation:
Commit #d675febf07d14d4dff82471829f974369705655a introduced a regression in QueryStringEncoder, resulting in whitespace being converted into a literal `+` sign instead of `%20`.
Modification:
Modify `encodeComponent` to pattern match and replace on the result of the call to `URLEncoder#encode`
Result:
Fixes regression
Motivation:
https://tools.ietf.org/html/rfc7230#section-3.3.2 states that a 204 response MUST NOT include a Content-Length header. If the HTTP version permits keep alive these responses should be treated as keeping the connection alive even if there is no Content-Length header.
Modifications:
- HttpServerKeepAliveHandler#isSelfDefinedMessageLength should account for 204 respones
Result:
Fixes https://github.com/netty/netty/issues/6549.
Motivation:
The updated HTTP/1.x RFC allows for header values to be CSV and separated by OWS [1]. CombinedHttpHeaders should remove this OWS on insertion.
[1] https://tools.ietf.org/html/rfc7230#section-7
Modification:
CombinedHttpHeaders doesn't account for the OWS and returns it back to the user as part of the value.
Result:
Fixes#6452
Motivation:
We used some deprecated Mockito methods.
Modifications:
- Replace deprecated method usage
- Some cleanup
Result:
No more usage of deprecated Mockito methods. Fixes [#6482].
Motivation:
We only need to add the port to the HOST header value if its not a standard port.
Modifications:
- Only add port if needed.
- Fix parsing of ipv6 address which is enclosed by [].
Result:
Fixes [#6426].
Motivation:
We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7
Modification:
Using ThreadLocalRandom implementation of the JDK when possible.
Result:
Make use of JDK implementations when possible.
Motivation:
Today, the HTTP codec in Netty responds to HTTP/1.1 requests containing
an "expect: 100-continue" header and a content-length that exceeds the
max content length for the server with a 417 status (Expectation
Failed). This is a violation of the HTTP specification. The purpose of
this commit is to address this situation by modifying the HTTP codec to
respond in this situation with a 413 status (Request Entity Too
Large). Additionally, the HTTP codec ignores expectations in the expect
header that are currently unsupported. This commit also addresses this
situation by responding with a 417 status.
Handling the expect header is tricky business as the specification (RFC
2616) is more complicated than it needs to be. The specification defines
the legitimate values for this header as "100-continue" and defines the
notion of expectatation extensions. Further, the specification defines a
417 status (Expectation Failed) and this is where implementations go
astray. The intent of the specification was for servers to respond with
417 status when they do not support the expectation in the expect
header.
The key sentence from the specification follows:
The server MUST respond with a 417 (Expectation Failed) status if
any of the expectations cannot be met or, if there are other
problems with the request, some other 4xx status.
That is, a server should respond with a 417 status if and only if there
is an expectation that the server does not support (whether it be
100-continue, or another expectation extension), and should respond with
another 4xx status code if the expectation is supported but there is
something else wrong with the request.
Modifications:
This commit modifies the HTTP codec by changing the handling for the
expect header in the HTTP object aggregator. In particular, the codec
will now respond with 417 status if any expectation other than
100-continue is present in the expect header, the codec will respond
with 413 status if the 100-continue expectation is present in the expect
header and the content-length is larger than the max content length for
the aggregator, and otherwise the codec will respond with 100 status.
Result:
The HTTP codec can now be used to correctly reply to clients that send a
100-continue expectation with a content-length that is too large for the
server with a 413 status, and servers that use the HTTP codec will now
no longer ignore expectations that are not supported (any value other
than 100-continue).
Motivation:
We used various mocking frameworks. We should only use one...
Modifications:
Make usage of mocking framework consistent by only using Mockito.
Result:
Less dependencies and more consistent mocking usage.
Motivation:
HttpObjectAggregator yields full HTTP messgaes (AggregatedFullHttpMessages) that don't respect decoder result when copied/replaced.
Modifications:
Copy the decoding result over to a new instance produced by AggregatedFullHttpRequest.replace or AggregatedFullHttpResponse.replace .
Result:
DecoderResult is now copied over when an original AggregatedFullHttpMessage is being replaced (i.e., AggregatedFullHttpRequest.replace or AggregatedFullHttpResponse.replace is being called).
New unit tests are passing on this branch but are failing on master.
Motivation:
HttpUtil.setTransferEncodingChunked could add a second Transfer-Encoding
header if one was already present. While this is technically valid, it
does not appear to be the intent of the method.
Result:
Only one Transfer-Encoding header is present after calling this method.
Motivation:
In Netty, currently, the HttpPostRequestEncoder only supports POST, PUT, PATCH and OPTIONS, while the RFC 7231 allows with a warning that GET, HEAD, DELETE and CONNECT use a body too (but not TRACE where it is explicitely not allowed).
The RFC in chapter 4.3 says:
"A payload within a XXX request message has no defined semantics;
sending a payload body on a XXX request might cause some existing
implementations to reject the request."
where XXX can be replaced by one of GET, HEAD, DELETE or CONNECT.
Current usages, on particular in REST mode, tend to use those extra HttpMethods for such queries.
So this PR proposes to remove the current restrictions, leaving only TRACE as explicitely not supported.
Modification:
In the constructor, where the test is done, replacing all by checking only against TRACE, and adding one test to check that all methods are supported or not.
Result:
Fixes#6138.
Motivation:
cb139043f3 introduced special handling of response to HEAD requests. Due a bug we failed to handle FullHttpResponse correctly.
Modifications:
Correctly handle FullHttpResponse for HEAD requests.
Result:
Works as expected.
Motivation:
We should have a unit test which explicitly tests a HTTP message being split between multiple ByteBuf objects.
Modifications:
- Add a unit test to HttpRequestDecoderTest which splits a request between 2 ByteBuf objects
Result:
More unit test coverage for HttpObjectDecoder.
request with a 'content-encoding: chunked' header
Motivation:
It is valid to send a response to a HEAD request that contains a transfer-encoding: chunked header, but it is not valid to include a body, and there is no way to do this using the netty4 HttpServerCodec.
The root cause is that the netty4 HttpObjectEncoder will transition to the state ST_CONTENT_CHUNK and the only way to transition back to ST_INIT is through the encodeChunkedContent method which will write the terminating length (0\r\n\r\n\r\n), a protocol error when responding to a HEAD request
Modifications:
- Keep track of the method of the request and depending on it handle the response differently when encoding it.
- Added a unit test.
Result:
Correclty handle HEAD responses that are chunked.
Motivation:
According to https://www.ietf.org/rfc/rfc2388.txt 4.4, filename after "content-disposition" is optional and arbitrary (does not need to match a real filename).
Modifications:
This change supports an extra addBodyFileUpload overload to precise the filename (default to File.getName). If empty or null this argument should be ignored during encoding.
Result:
- A backward-compatible addBodyFileUpload(String, File, String, boolean) to use file.getName() as filename.
- A new addBodyFileUpload(String, String, File, String, boolean) overload to precise filename
- Couple of tests for the empty use case
Motivation:
* DefaultHeaders from netty-codec has some duplicated logic for header date parsing
* Several classes keep on using deprecated HttpHeaderDateFormat
Modifications:
* Move HttpHeaderDateFormatter to netty-codec and rename it into HeaderDateFormatter
* Make DefaultHeaders use HeaderDateFormatter
* Replace HttpHeaderDateFormat usage with HeaderDateFormatter
Result:
Faster and more consistent code
Motivation:
code assumes a numeric value of 0 means no digits were read between separators, which fails for timestamps like 00:00:00.
also code accepts invalid timestamps like 0:0:000
Modifications:
explicitly check for number of digits between separators instead of relying on the numeric value.
also add tests.
Result:
timestamps with 00 successfully parse, timestamps with 000 no longer
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
The method HttpUtil.getCharsetAsString(...) is missleading as its return type is CharSequence and not String.
Modifications:
Deprecate HttpUtil.getCharsetAsString(...) and introduce HttpUtil.getCharsetAsSe
quence(...).
Result:
Less confusing method name.
Motivation:
* RFC6265 defines its own parser which is different from RFC1123 (it accepts RFC1123 format but also other ones). Basically, it's very lax on delimiters, ignores day of week and timezone. Currently, ClientCookieDecoder uses HttpHeaderDateFormat underneath, and can't parse valid cookies such as Github ones whose expires attribute looks like "Sun, 27 Nov 2016 19:37:15 -0000"
* ServerSideCookieEncoder currently uses HttpHeaderDateFormat underneath for formatting expires field, and it's slow.
Modifications:
* Introduce HttpHeaderDateFormatter that correctly implement RFC6265
* Use HttpHeaderDateFormatter in ClientCookieDecoder and ServerCookieEncoder
* Deprecate HttpHeaderDateFormat
Result:
* Proper RFC6265 dates support
* Faster ServerCookieEncoder and ClientCookieDecoder
* Faster tool for handling headers such as "Expires" and "Date"
Motiviation:
We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.
Modifications:
- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.
Result:
Less memory needed to build netty while running the tests.
Motivation:
If the wsURL contains an encoded query, it will be decoded when generating the raw path. For example if the wsURL is http://test.org/path?a=1%3A5, the returned raw path would be /path?a=1:5
Modifications:
Use wsURL.getRawQuery() rather than wsURL.getQuery()
Result:
rawPath will now return /path?a=1%3A5
Motivation:
The HttpObjectAggregator never appends a 'Connection: close' header to
the response of oversized messages even though in the majority of cases
its going to close the connection.
Modification:
This PR addresses that by ensuring the requisite header is present when
the connection is going to be closed.
Result:
Gracefully signal that we are about to close the connection.
Motivation:
We need to ensure we not add the Transfer-Encoding header if the HttpMessage is EOF terminated.
Modifications:
Only add the Transfer-Encoding header if an Content-Length header is present.
Result:
Correctly handle HttpMessage that is EOF terminated.
Motivation:
We want to reject the upgrade as quickly as possible, so that we can
support streamed responses.
Modifications:
Reject the upgrade as soon as we inspect the headers if they're wrong,
instead of waiting for the entire response body.
Result:
If a remote server doesn't know how to use the http upgrade and tries to
responsd with a streaming response that never ends, the client doesn't
buffer forever, but can instead pass it along. Fixes#5954
Motivation:
The Javadocs of HttpUtil.getContentLength(HttpMessage, long) and its int overload state that the provided default value is returned if the Content-Length value is not a number. NumberFormatException is thrown instead.
Modifications:
Correctly handle when the value is not a number.
Result:
API works as stated in javadocs.
Motivation:
HttpObjectDecoder maintains a resetRequested flag which is used to determine if internal state should be reset when a decode occurs. However after a reset is done the resetRequested flag is not set to false. This leads to all data after this point being discarded.
Modifications:
- Set resetRequested to false when a reset is done
Result:
HttpObjectDecoder can still function after a reset.
Motivation:
As discussed in #5738, developers need to concern themselves with setting
connection: keep-alive on the response as well as whether to close a
connection or not after writing a response. This leads to special keep-alive
handling logic in many different places. The purpose of the HttpServerKeepAliveHandler
is to allow developers to add this handler to their pipeline and therefore
free themselves of having to worry about the details of how Keep-Alive works.
Modifications:
Added HttpServerKeepAliveHandler to the io.netty.handler.codec.http package.
Result:
Developers can start using HttpServerKeepAliveHandler in their pipeline instead
of worrying about when to close a connection for keep-alive.
Motivation:
As described in #5734
Before this change, if the server had to do some sort of setup after a
handshake was completed based on handshake's information, the only way
available was to wait (in a separate thread) for the handshaker to be
added as an attribute to the channel. Too much hassle.
Modifications:
Handshake completed event need to be stateful now, so I've added a tiny
class holding just the HTTP upgrade request and the selected subprotocol
which is fired as an event after the handshake has finished.
I've also deprecated the old enum used as stateless event and I left the
code that fires it for backward compatibility. It should be removed in
the next mayor release.
Result:
It should be much simpler now to do initialization stuff based on
subprotocol or request headers on handshake completion. No asynchronous
waiting needed anymore.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding and to set the Connection header on the response.
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
RFC 6265 does not state that cookie names must be case insensitive.
Modifications:
Fix io.netty.handler.codec.http.cookie.DefaultCookie#equals() method to
use case sensitive String#equals() and String#compareTo().
Result:
It is possible to parse several cookies with same names but with
different cases.
Motivation:
The CorsHandler currently returns the Access-Control-Allow-Headers
header as on a Non-Preflight CORS request (Simple request).
As per the CORS specification the Access-Control-Allow-Headers header
should only be returned on Preflight requests. (not on simple requests).
https://www.w3.org/TR/2014/REC-cors-20140116/#access-control-allow-headers-response-headerhttp://www.html5rocks.com/static/images/cors_server_flowchart.png
Modifications:
Modified CorsHandler.java to not add the Access-Control-Allow-Headers
header when responding to Non-preflight CORS request.
Result:
Access-Control-Allow-Headers header will not be returned on a Simple
request (Non-preflight CORS request).
Motivation:
retainSlice() currently does not unwrap the ByteBuf when creating the ByteBuf wrapper. This effectivley forms a linked list of ByteBuf when it is only necessary to maintain a reference to the unwrapped ByteBuf.
Modifications:
- retainSlice() and retainDuplicate() variants should only maintain a reference to the unwrapped ByteBuf
- create new unit tests which generally verify the retainSlice() behavior
- Remove unecessary generic arguments from AbstractPooledDerivedByteBuf
- Remove unecessary int length member variable from the unpooled sliced ByteBuf implementation
- Rename the unpooled sliced/derived ByteBuf to include Unpooled in their name to be more consistent with the Pooled variants
Result:
Fixes https://github.com/netty/netty/issues/5582
Motivation:
Currently, QueryStringDecoder#path simply returns the path info as is, without decoding it as the Javadoc states.
Modifications:
* Make QueryStringDecoder#path decode the path info.
* Add tests to QueryStringDecoderTest.
Result:
QueryStringDecoder#path now decodes the path info as expected.
Motivation:
DiskFileUpload and MemoryFileUpload.equals(...) are broken.
Modifications:
Fix implementation and add unit test.
Result:
Equals method are correct now.
Motivation:
These methods were recently deprecated. However, they remained in use in several locations in Netty's codebase.
Modifications:
Netty's code will now access the bootstrap config to get the group or child group.
Result:
No impact on functionality.
Motivation:
When HTTPS is used we should use https in the sec-websocket-origin / origin header
Modifications:
- Correctly generate the sec-websocket-origin / origin header
- Add unit tests.
Result:
Generate correct header.
`HttpContentDecoder` was removing `Content-Length` header but not adding a `Transfer-Encoding` header which goes against the HTTP spec.
Added `Transfer-Encoding` header with value `chunked` when `Content-Length` is removed.
Modified existing unit test to also check for this condition.
Compliance with HTTP spec.
Motivation:
When using HttpContentCompressor and the HttpResponse is protocol version 1.0, HttpContentEncoder.encode() should not set the transfer-encoding header to chunked. Chunked transfer-encoding is not valid for HTTP 1.0 - this causes ERR_CONTENT_DECODING_FAILED errors in chrome and similar failures in IE.
Modifications:
Skip HTTP/1.0 messages
Result:
Be able to serve HTTP/1.0 as well when HttpContentEncoder is in the pipeline.
Motivation:
Its completly fine for ChunkedInput.readChunk(...) to return null to indicate there is currently not any data to read. We need to handle this in HttpChunkedInput to not produce a NPE when constructing the HttpContent.
Modifications:
If readChunk(...) return null just return null as well.
Result:
No more NPE.
Motivation:
When the channel is closed while we still decode the headers we currently not preserve correct message sequence. In this case we should generate an invalid message with a current cause.
Modifications:
Create an invalid message with a PrematureChannelClosureException as cause when the channel is closed while we decode the headers.
Result:
Correct message sequence preserved and correct DecoderResult if the channel is closed while decode headers.
Motivation:
At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.
Modifications:
Add new methods that autoamtically increase the writerIndex when buffers are added.
Result:
Easier usage of CompositeByteBuf.
Motivation:
The HPACK code currently disallows empty header names. This is not explicitly forbidden by the HPACK RFC https://tools.ietf.org/html/rfc7541. However the HTTP/1.x RFC https://tools.ietf.org/html/rfc7230#section-3.2 and thus HTTP/2 both disallow empty header names, and so this precondition check should be moved from the HPACK code to the protocol level.
HPACK also requires that string literals which are huffman encoded must be treated as an encoding error if the string has more than 7 trailing padding bits https://tools.ietf.org/html/rfc7541#section-5.2, but this is currently not enforced.
Result:
- HPACK to allow empty header names
- HTTP/1.x and HTTP/2 header validation should not allow empty header names
- Enforce max of 7 trailing padding bits
Result:
Code is more compliant with the above mentioned RFCs
Fixes https://github.com/netty/netty/issues/5228
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
Motivation:
At the moment we let the IllegalArgumentException escape when parsing form parameters. This is not expected.
Modifications:
Correctly catch IllegalArgumentException and rethrow as ErrorDataDecoderException.
Result:
Throw correct exception.
Motivation:
Currently the way a 'null' origin, a request that most often indicated
that the request is coming from a file on the local file system, is
handled is incorrect. We are currently returning a wildcard origin '*'
but should be returning 'null' for the 'Access-Control-Allow-Origin'
which is valid according to the specification [1].
Modifications:
Updated CorsHandler to add a 'null' origin instead of the '*' origin in
the case the request origin is 'null.
Result:
All test pass and the CORS example as does the cors.html example if you
try to serve it by opening the file directly in a web browser.
[1]
https://www.w3.org/TR/cors/#access-control-allow-origin-response-header
Motivation:
There is a spelling error in FileRegion.transfered() as it should be transferred().
Modifications:
Deprecate old method and add a new one.
Result:
Fix typo and can remove the old method later.
Motivation:
DefaultCookie constructor performs a name validation that doesn’t match
RFC6265. Moreover, such validation is already performed in strict
encoders and decoders.
Modifications:
Drop DefaultCookie name validation, rely on encoders and decoders.
Result:
no more duplicate broken validation
Motivation:
The current HttpPostMultipartRequestDecoder can decode multipart/form-data parts with a Content-Type that specifies a charset. When this charset is invalid the Charset.forName() throws an unchecked UnsupportedCharsetException. This exception is not catched by the decoder. It should actually be rethrown as an ErrorDataDecoderException, because the developer using the API would expect this validation failure to be reported as such.
Modifications:
Add a catch block for UnsupportedCharsetException and rethrow it as an ErrorDataDecoderException.
Result:
UnsupportedCharsetException are now rethrown as ErrorDataDecoderException.
Motivation:
See #4855
Modifications:
Unfortunately, unescapeCsv cannot be used here because the input could be a CSV line like `"a,b",c`. Hence this patch adds unescapeCsvFields to parse a CSV line and split it into multiple fields and unescaped them. The unit tests should define the behavior of unescapeCsvFields.
Then this patch just uses unescapeCsvFields to implement `CombinedHttpHeaders.getAll`.
Result:
`CombinedHttpHeaders.getAll` will return the unescaped values of a header.
Motivation:
If the Connection header contains multiple values (which is valid) we fail to detect a websocket upgrade
Modification:
- Add new method which allows to check if a header field contains a specific value (and also respect multiple header values)
- Use this method to detect handshake
Result:
Correct detect handshake if Connection header contains multiple values (seperated by ',').
Motivation:
If the ZlibCodecFactory can support using a custom window size we should support it by default in the websocket extensions as well.
Modifications:
Detect if a custom window size can be handled by the ZlibCodecFactory and if so enable it by default for PerMessageDeflate*ExtensionHandshaker.
Result:
Support window size flag by default in most installations.
Motivation:
If the user calls handshake.finishHandshake() we need to ensure that the user has the chance to setup the pipeline before any WebSocketFrames are read. Because of this we need
to delay the removal of the HttpRequestDecoder.
Modifications:
- Remove the HttpRequestDecoder via the EventLoop and so delay it which gives the user a chance to setup the pipeline after finishHandshake() completes
- Add unit test for this.
Result:
Less surpising and correct behaviour even if the http response and websocket frame are received in one read operation.
Motivation:
I am use netty as a http server, it fail to decode some POST request when the request absent Content-Type in the multipart/form-data body.
Modifications:
Set content_type with default application/octet-stream to parse the uploaded file data when the Content-Type is absent in multipart request body
Result:
Can decode the http request as normal.
Motivation:
Warnings in IDE, unclean code, negligible performance impact.
Modification:
Deletion of unused imports
Result:
No more warnings in IDE, cleaner code, negligible performance improvement.
Motivation:
As we not used Unpooled anymore for allocate buffers in Base64.* methods we need to ensure we realease all the buffers.
Modifications:
Correctly release buffers
Result:
No more buffer leaks
Motivation:
ChunkedInput.readChunk currently takes a ChannelHandlerContext object as a parameters. All current implementations of this interface only use this object to get the ByteBufAllocator object. Thus taking a ChannelHandlerContext as a parameter is more restrictive for users of this API than necessary.
Modifications:
- Add a new method readChunk(ByteBufAllocator)
- Deprecate readChunk(ChannelHandlerContext) and updates all implementations to call readChunk(ByteBufAllocator)
Result:
API that only requires ByteBufAllocator to use ChunkedInput.
Motivation:
We have websocket extension support (with compression) in old master. We should port this to 4.1
Modifications:
Backport relevant code.
Result:
websocket extension support (with compression) is now in 4.1.
Motivation:
Consistency in API design
Modifications:
- Deprecate CorsConfig.Builder and its factory methods
- Deprecate CorsConfig.DateValueGenerator
- Add CorsConfigBuilder and its factory methods
- Fix typo (curcuit -> circuit)
Result:
Consistency with other builder APIs such as SslContextBuilder and
Http2ConnectionHandlerBuilder
Motivation:
If a uri contains whitespaces we need to ensure we correctly escape these when creating the request for the handshake.
Modifications:
- Correctly encode path for uri
- Add tests
Result:
Correctly handle whitespaces when doing websocket upgrade requests.
Motivation:
- On the client, cookies should be sorted in decreasing order of path
length. From RFC 6265:
5.4.2. The user agent SHOULD sort the cookie-list in the following
order:
* Cookies with longer paths are listed before cookies with
shorter paths.
* Among cookies that have equal-length path fields, cookies with
earlier creation-times are listed before cookies with later
creation-times.
NOTE: Not all user agents sort the cookie-list in this order, but
this order reflects common practice when this document was
written, and, historically, there have been servers that
(erroneously) depended on this order.
Note that the RFC does not define the path length of cookies without a
path. We sort pathless cookies before cookies with the longest path,
since pathless cookies inherit the request path (and setting a path
that is longer than the request path is of limited use, since it cannot
be read from the context in which it is written).
- On the server, if there are multiple cookies of the same name, only one
of them should be encoded. RFC 6265 says:
Servers SHOULD NOT include more than one Set-Cookie header field in
the same response with the same cookie-name.
Note that the RFC does not define which cookie should be set in the case
of multiple cookies with the same name; we arbitrarily pick the last one.
Modifications:
- Changed the visibility of the 'strict' field to 'protected' in
CookieEncoder.
- Modified ClientCookieEncoder to sort cookies in decreasing order of path
length when in strict mode.
- Modified ServerCookieEncoder to return only the last cookie of a given
name when in strict mode.
- Added a fast path for both strict mode in both client and server code
for cases with only one cookie, in order avoid the overhead of sorting
and memory allocation.
- Added unit tests for the new cases.
Result:
- Cookie generation on client and server is now more conformant to RFC 6265.
Motivation:
HttpHeaders already has specific methods for such popular and simple headers like "Host", but if I need to convert POST raw body to string I need to parse complex ContentType header in my code.
Modifications:
Add getCharset and getCharsetAsString methods to parse charset from Content-Length header.
Result:
Easy to use utility method.
Motivation:
Headers and groups of headers are frequently copied and the current mechanism is slower than it needs to be.
Modifications:
Skip name validation and hash computation when they are not necessary.
Fix emergent bug in CombinedHttpHeaders identified with better testing
Fix memory leak in DefaultHttp2Headers when clearing
Added benchmarks
Result:
Faster header copying and some collateral bug fixes
Motivation:
Makes the API contract of headers more consistent and simpler.
Modifications:
If self is passed to set then simply return
Result:
set and setAll will be consistent
Keep RTSPRequestEncoder, RTSPRequestDecoder, RTSPResponseEncoder and
RTSPResponseDecoder for backwards compatibility but they now just extends
the generic encoder/decoder and are markes as deprecated.
Renamed the decoder test, because the decoder is now generic. Added
testcase for when ANNOUNCE request is received from server.
Created testcases for encoder.
Mark abstract base classes RTSPObjectEncoder and RTSPObjectDecoder as
deprecated, that functionality is now in RTSPEncoder and RTSPDecoder.
Added annotation in RtspHeaders to suppress warnings about deprecation, no need when
whole class is deprecated.
Motivation:
We should prevent to add/set DefaultHttpHeaders to itself to prevent unexpected side-effects.
Modifications:
Throw IllegalArgumentException if user tries to pass the same instance to set/add.
Result:
No surprising side-effects.
Motivation:
As we stored the WebSocketServerHandshaker in the ChannelHandlerContext it was always null and so no close frame was send if WebSocketServerProtocolHandler was used.
Modifications:
Store WebSocketServerHAndshaker in the Channel attributes and so make it visibile between different handlers.
Result:
Correctly send close frame.
Motivaion:
The HttpHeaders and DefaultHttpHeaders have methods deprecated due to being removed in future releases, but no replacement method to use in the current release. The deprecation policy should not be so aggressive as to not provide any non-deprecated method to use.
Modifications:
- Remove deprecated annotations and javadocs from methods which are the best we can do in terms of matching the master's api for 4.1
Result:
There should be non-deprecated methods available for HttpHeaders in 4.1.
Motivation:
There currently exists http.HttpUtil, http2.HttpUtil, and http.HttpHeaderUtil. Having 2 HttpUtil methods can be confusing and the utilty methods in the http package could be consolidated.
Modifications:
- Rename http2.HttpUtil to http2.HttpConversionUtil
- Move http.HttpHeaderUtil methods into http.HttpUtil
Result:
Consolidated utilities whose names don't overlap.
Fixes https://github.com/netty/netty/issues/4120
Motivation:
Whe a 100 Continue response was written an IllegalStateException was produced as soon as the user wrote the following response. This regression was introduced by 41b0080fcc.
Modifications:
- Special handle 100 Continue responses
- Added unit tests
Result:
Fixed regression.
Motivation:
The HttpObjectAggregator always responds with a 100-continue response. It should check the Content-Length header to see if the content length is OK, and if not responds with a 417.
Modifications:
- HttpObjectAggregator checks the Content-Length header in the case of a 100-continue.
Result:
HttpObjectAggregator responds with 417 if content is known to be too big.
Motivation:
When attempting to retrieve a SPDY header using an AsciiString key, if the header was inserted using a String based key, the lookup would fail. Similarly, the lookup would fail if the header was inserted with an AsciiString key, and retrieved using a String key. This has been fixed with the header simplification commit (1a43923aa8).
Extra unit tests have been added to protect against this issue occurring in the future. The tests check that a header added using String or AsciiString can be retrieved using AsciiString or String respectively.
Modifications:
Added more unit tests
Result:
Protect against issue #4053 happening again.
Motivation:
A degradation in performance has been observed from the 4.0 branch as documented in https://github.com/netty/netty/issues/3962.
Modifications:
- Simplify Headers class hierarchy.
- Restore the DefaultHeaders to be based upon DefaultHttpHeaders from 4.0.
- Make various other modifications that are causing hot spots.
Result:
Performance is now on par with 4.0.
Motivation:
Due not using a cast we insert 32 and not a whitespace into the String.
Modifications:
Correclty cast to char.
Result:
Correct handling of whitespaces.
Motivation:
In the event an HTTP message does not include either a content-length or a transfer-encoding header [RFC 7230](https://tools.ietf.org/html/rfc7230#section-3.3.3) states the behavior must be treated differently for requests and responses. If the channel is half closed then the HttpObjectDecoder is not invoking decodeLast and thus not checking if messages should be sent up the pipeline.
Modifications:
- Add comments to clarify regular decode default case.
- Handle the ChannelInputShutdownEvent in the HttpObjectDecoder and evaluate if messages need to be generated.
Result:
Messages are generated on half closed, and comments clarify existing logic.
Motivation:
We noticed that the headers implementation in Netty for HTTP/2 uses quite a lot of memory
and that also at least the performance of randomly accessing a header is quite poor. The main
concern however was memory usage, as profiling has shown that a DefaultHttp2Headers
not only use a lot of memory it also wastes a lot due to the underlying hashmaps having
to be resized potentially several times as new headers are being inserted.
This is tracked as issue #3600.
Modifications:
We redesigned the DefaultHeaders to simply take a Map object in its constructor and
reimplemented the class using only the Map primitives. That way the implementation
is very concise and hopefully easy to understand and it allows each concrete headers
implementation to provide its own map or to even use a different headers implementation
for processing requests and writing responses i.e. incoming headers need to provide
fast random access while outgoing headers need fast insertion and fast iteration. The
new implementation can support this with hardly any code changes. It also comes
with the advantage that if the Netty project decides to add a third party collections library
as a dependency, one can simply plug in one of those very fast and memory efficient map
implementations and get faster and smaller headers for free.
For now, we are using the JDK's TreeMap for HTTP and HTTP/2 default headers.
Result:
- Significantly fewer lines of code in the implementation. While the total commit is still
roughly 400 lines less, the actual implementation is a lot less. I just added some more
tests and microbenchmarks.
- Overall performance is up. The current implementation should be significantly faster
for insertion and retrieval. However, it is slower when it comes to iteration. There is simply
no way a TreeMap can have the same iteration performance as a linked list (as used in the
current headers implementation). That's totally fine though, because when looking at the
benchmark results @ejona86 pointed out that the performance of the headers is completely
dominated by insertion, that is insertion is so significantly faster in the new implementation
that it does make up for several times the iteration speed. You can't iterate what you haven't
inserted. I am demonstrating that in this spreadsheet [1]. (Actually, iteration performance is
only down for HTTP, it's significantly improved for HTTP/2).
- Memory is down. The implementation with TreeMap uses on avg ~30% less memory. It also does not
produce any garbage while being resized. In load tests for GRPC we have seen a memory reduction
of up to 1.2KB per RPC. I summarized the memory improvements in this spreadsheet [1]. The data
was generated by [2] using JOL.
- While it was my original intend to only improve the memory usage for HTTP/2, it should be similarly
improved for HTTP, SPDY and STOMP as they all share a common implementation.
[1] https://docs.google.com/spreadsheets/d/1ck3RQklyzEcCLlyJoqDXPCWRGVUuS-ArZf0etSXLVDQ/edit#gid=0
[2] https://gist.github.com/buchgr/4458a8bdb51dd58c82b4
Motivation:
WebSocketServerHandshakerFactory.sendUnsupportedVersionResponse does not
send a LastHttpContent, nor does it flush, and it doesn't send a content
length.
Modifications:
Changed sendUnsupportedVersionResponse to send FullHttpResponse, to
writeAndFlush, and to set a content length of 0. Also added a test for
this method.
Result:
Upstream handlers will be able to determine the end of the response, the
response will actually get written to the client, and the client will be
able to determine the end of the response.
Proposal to fix issue #3636
Motivations:
Currently, while adding the next buffers to the decoder
(`decoder.offer()`), there is no way to access to the current HTTP
object being decoded since it can only be available currently once fully
decoded by `decoder.hasNext()`.
Some could want to know the progression on the overall transfer but also
per HTTP object.
While overall progression could be done using (if available) the global
Content-Length of the request and taking into account each HttpContent
size, the per HttpData object progression is unknown.
Modifications:
1) For HTTP object, `AbstractHttpData` has 2 protected properties named
`definedSize` and `size`, respectively the supposely final size and the
current (decoded until now) size.
This provides a new method `definedSize()` to get the current value for
`definedSize`. The `size` attribute is reachable by the `length()`
method.
Note however there are 2 different ways that currently managed the
`definedSize`:
a) `Attribute`: it is reset each time the value is less than actual
(when a buffer is added, the value is increased) since the final length
is not known (no Content-Length)
b) `FileUpload`: it is set at startup from the lengh provided
So these differences could lead in wrong perception;
a) `Attribute`: definedSize = size always
b) `FileUpload`: definedSize >= size always
Therefore the comment tries to explain clearly the different behaviors.
2) In the InterfaceHttpPostRequestDecoder (and the derived classes), I
add a new method: `decoder.currentPartialHttpData()` which will return a
`InterfaceHttpData` (if any) as the current `Attribute` or `FileUpload`
(the 2 generic types), which will allow then the programmer to check
according to the real type (instance of) the 2 methods `definedSize()`
and `length()`.
This method check if currentFileUpload or currentAttribute are null and
returns the one (only one could be not null) that is not null.
Note that if this method returns null, it might mean 2 situations:
a) the last `HttpData` (whatever attribute or file upload) is already
finished and therefore accessible through `next()`
b) there is not yet any `HttpData` in decoding (body not yet parsed for
instance)
Result:
The developper has more access and therefore control on the current
upload.
The coding from developper side could looks like in the example in
HttpUloadServerHandler.
Motivation:
We need to ensure we never allow to have null values set on headers, otherwise we will see a NPE during encoding them.
Modifications:
Add unit test that shows we correctly handle null values.
Result:
Verify correct implementation.
Motivation:
Found a bug in that netty would generate a 20 byte body when returing a response
to an HTTP HEAD. the 20 bytes seems to be related to the compression footer.
RFC2616, section 9.4 states that responses to an HTTP HEAD MUST not return a message
body in the response.
Netty's own client implementation expected an empty response. The extra bytes lead to a
2nd response with an error decoder result:
java.lang.IllegalArgumentException: invalid version format: 14
Modifications:
Track the HTTP request method. When processing the response we determine if the response
is passthru unnchanged. This decision now takes into account the request method and passthru
responses related to HTTP HEAD requests.
Result:
Netty's http client works and better RFC conformance.
Motivation:
* Path attribute should be null, not empty String, if it's passed as "Path=".
* Only extract attribute value when the name is recognized.
* Only extract Expires attribute value String if MaxAge is undefined as it has precedence.
Modification:
Modify ClientCookieDecoder.
Add "testIgnoreEmptyPath" test in ClientCookieDecoderTest.
Result:
More idyomatic Path behavior (like Domain).
Minor performance improvement in some corner cases.
RFC6265 specifies which characters are allowed in a cookie name and value.
Netty is currently too lax, which can used for HttpOnly escaping.
Modification:
In ServerCookieDecoder: discard cookie key-value pairs that contain invalid characters.
In ClientCookieEncoder: throw an exception when trying to encode cookies with invalid characters.
Result:
The problem described in the motivation section is fixed.
Motivation:
The usage and code within AsciiString has exceeded the original design scope for this class. Its usage as a binary string is confusing and on the verge of violating interface assumptions in some spots.
Modifications:
- ByteString will be created as a base class to AsciiString. All of the generic byte handling processing will live in ByteString and all the special character encoding will live in AsciiString.
Results:
The AsciiString interface will be clarified. Users of AsciiString can now be clear of the limitations the class imposes while users of the ByteString class don't have to live with those limitations.
Related: #3445
Motivation:
HttpObjectDecoder.HeaderParser does not reset its counter (the size
field) when it failed to find the end of line. If a header is split
into multiple fragments, the counter is increased as many times as the
number of fragments, resulting an unexpected TooLongFrameException.
Modifications:
- Add test cases that reproduces the problem
- Reset the HeaderParser.size field when no EOL is found.
Result:
One less bug
Motivation:
Currently CORS can be configured to support a 'null' origin, which can
be set by a browser if a resources is loaded from the local file system.
When this is done 'Access-Control-Allow-Origin' will be set to "*" (any
origin). There is also a configuration option to allow credentials being
sent from the client (cookies, basic HTTP Authentication, client side
SSL). This is indicated by the response header
'Access-Control-Allow-Credentials' being set to true. When this is set
to true, the "*" origin is not valid as the value of
'Access-Control-Allow-Origin' and a browser will reject the request:
http://www.w3.org/TR/cors/#resource-requests
Modifications:
Updated CorsHandler's setAllowCredentials to check the origin and if it
is "*" then it will not add the 'Access-Control-Allow-Credentials'
header.
Result:
Is is possible to have a client send a 'null' origin, and at the same
time have configured the CORS to support that and to allow credentials
in that combination.
Motivation:
At the moment if you want to return a HTTP header containing multiple
values you have to set/add that header once with the values wanted. If
you used set/add with an array/iterable multiple HTTP header fields will
be returned in the response.
Note, that this is indeed a suggestion and additional work and tests
should be added. This is mainly to bring up a discussion.
Modifications:
Added a flag to specify that when multiple values exist for a single
HTTP header then add them as a comma separated string.
In addition added a method to StringUtil to help escape comma separated
value charsequences.
Result:
Allows for responses to be smaller.
In testEncodingSingleCookieV0():
Let's assume we encoded a cookie with MaxAge=50 when currentTimeMillis
is 10999.
Because the encoder will not encode the millisecond part for Expires,
the timeMillis value of the encoded Expires field will be 60000. (If we
did not dropped the millisecond part, it would be 60999.)
Encoding a cookie will take some time, so currentTimeMillis will
increase slightly, such as to 11001.
diff = (60000 - 11001) / 1000 = 48999 / 1000 = 48
maxAge - diff = 50 - 48 = 2
Due to losing millisecond part twice, we end up with the precision
problem illustrated above, and thus we should increase the tolerance
from 1 second to 2 seconds.
/cc @slandelle
Motivation:
Internet Explorer doesn't honor Set-Cookie header Max-Age attribute. It only honors the Expires one.
Modification:
Always generate an Expires attribute along the Max-Age one.
Result:
Internet Explorer compatible expiring cookies. Close#1466.
Motivation:
HttpContentDecoder had the following issues:
- For chunked content, the decoder set invalid "Content-Length" header
with length of the first decoded chunk.
- Decoding of FullHttpRequests put both the original conent and decoded
content into output. As result, using HttpObjectAggregator before the
decoder lead to errors.
- Requests with "Expect: 100-continue" header were not acknowleged:
the decoder didn't pass the header message down the handler's chain
until content is received. If client expected "100 Continue" response,
deadlock happened.
Modification:
- Invalid "Content-Length" header is removed; handlers down the chain can either
rely on LastHttpContent message or ask HttpObjectAggregator to add the header.
- FullHttpRequest is split into HttpRequest and HttpContent (decoded) parts.
- Header (HttpRequest) part of request is sent down the chain as soon as it's received.
Result:
The issues are fixed, unittest is added.
Motivation:
Rfc6265Client/ServerCookieEncoder is a better replacement of the old
Client/ServerCookieEncoder, and thus there's no point of keeping both.
Modifications:
- Remove the old Client/ServerCookieEncoder
- Remove the 'Rfc6265' prefix from the new cookie encoder/decoder
classes
- Deprecate CookieDecoder
Result:
We have much better cookie encoder/decoder implementation now.
Motivation:
Currently Netty supports a weird implementation of RFC 2965.
First, this RFC has been deprecated by RFC 6265 and nobody on the
internet use this format.
Then, there's a confusion between client side and server side encoding
and decoding.
Typically, clients should only send name=value pairs.
This PR introduces RFC 6265 support, but keeps on supporting RFC 2965 in
the sense that old unused fields are simply ignored, and Cookie fields
won't be populated. Deprecated fields are comment, commentUrl, version,
discard and ports.
It also provides a mechanism for safe server-client-server roundtrip, as
User-Agents are not supposed to interpret cookie values but return them
as-is (e.g. if Set-Cookie contained a quoted value, it should be sent
back in the Cookie header in quoted form too).
Also, there are performance gains to be obtained by not allocating the
attribute name Strings, as we only want to match them to find which POJO
field to populate.
Modifications:
- New RFC6265ClientCookieEncoder/Decoder and
RFC6265ServerCookieEncoder/Decoder pairs that live alongside old
CookieEncoder/Decoder pair to not break backward compatibility.
- New Cookie.rawValue field, used for lossless server-client-server
roundtrip.
Result:
RFC 6265 support.
Clean separation of client and server side.
Decoder performance gain:
Benchmark Mode Samples Score Error
Units
parseOldClientDecoder thrpt 20 2070169,228 ± 105044,970
ops/s
parseRFC6265ClientDecoder thrpt 20 2954015,476 ± 126670,633
ops/s
This commit closes#3221 and #1406.
Motivation:
HttpPostMultipartRequestDecoder threw an ArrayIndexOutOfBoundsException
when trying to decode Content-Disposition header with filename
containing ';' or protected \\".
See issue #3326 and #3327.
Modifications:
Added splitMultipartHeaderValues method which cares about quotes, and
use it in splitMultipartHeader method, instead of StringUtils.split.
Result:
Filenames can contain semicolons and protected \\".
Motivations:
It seems that slicing a buffer and using this slice to write to CTX will
decrease the initial refCnt to 0, while the original buffer is not yet
fully used (not empty).
Modifications:
As suggested in the ticket and tested, when the currentBuffer is sliced
since it will still be used later on, the currentBuffer is retained.
Add a test case for this issue.
Result:
The currentBuffer still has its correct refCnt when reaching the last
write (not sliced) of 1 and therefore will be released correctly.
The exception does no more occur.
This fix should be applied to all branches >= 4.0.
Motivation:
without this check then given a URI with path /path the resulting URL will be /path?null=
Modifications:
check that getRawQuery doesn't return null and only append if not
Result:
urls of the form /path will not have a null?= appended
Motiviation:
The HttpContentEncoder does not account for a EmptyLastHttpContent being provided as input. This is useful in situations where the client is unable to determine if the current content chunk is the last content chunk (i.e. a proxy forwarding content when transfer encoding is chunked).
Modifications:
- HttpContentEncoder should not attempt to compress empty HttpContent objects
Result:
HttpContentEncoder supports a EmptyLastHttpContent to terminate the response.
Motivation:
The commit 50e06442c3 changed the type of
the constants in HttpHeaders.Names and HttpHeaders.Values, making 4.1
backward-incompatible with 4.0.
It also introduces newer utility classes such as HttpHeaderUtil, which
deprecates most static methods in HttpHeaders. To ease the migration
between 4.1 and 5.0, we should deprecate all static methods that are
non-existent in 5.0, and provide proper counterpart.
Modification:
- Revert the changes in HttpHeaders.Names and Values
- Deprecate all static methods in HttpHeaders in favor of:
- HttpHeaderUtil
- the member methods of HttpHeaders
- AsciiString
- Add integer and date access methods to HttpHeaders for easier future
migration to 5.0
- Add HttpHeaderNames and HttpHeaderValues which provide standard HTTP
constants in AsciiString
- Deprecate HttpHeaders.Names and Values
- Make HttpHeaderValues.WEBSOCKET lowercased because it's actually
lowercased in all WebSocket versions but the oldest one
- Add RtspHeaderNames and RtspHeaderValues which provide standard RTSP
constants in AsciiString
- Deprecate RtspHeaders.*
- Do not use AsciiString.equalsIgnoreCase(CharSeq, CharSeq) if one of
the parameters are AsciiString
- Avoid using AsciiString.toString() repetitively
- Change the parameter type of some methods from String to
CharSequence
Result:
Backward compatibility is recovered. New classes and methods will make
the migration to 5.0 easier, once (Http|Rtsp)Header(Names|Values) are
ported to master.
Motivation:
The header class hierarchy and algorithm was improved on the master branch for versions 5.x. These improvments should be backported to the 4.1 baseline.
Modifications:
- cherry-pick the following commits from the master branch: 2374e17, 36b4157, 222d258
Result:
Header improvements in master branch are available in 4.1 branch.
Motivation:
The requirement for the masking of frames and for checks of correct
masking in the websocket specifiation have a large impact on performance.
While it is mandatory for browsers to use masking there are other
applications (like IPC protocols) that want to user websocket framing and proxy-traversing
characteristics without the overhead of masking. The websocket standard
also mentions that the requirement for mask verification on server side
might be dropped in future.
Modifications:
Added an optional parameter allowMaskMismatch for the websocket decoder
that allows a server to also accept unmasked frames (and clients to accept
masked frames).
Allowed to set this option through the websocket handshaker
constructors as well as the websocket client and server handlers.
The public API for existing components doesn't change, it will be
forwarded to functions which implicetly set masking as required in the
specification.
For websocket clients an additional parameter is added that allows to
disable the masking of frames that are sent by the client.
Result:
This update gives netty users the ability to create and use completely
unmasked websocket connections in addition to the normal masked channels
that the standard describes.
Motivation:
The 4.1.0-Beta3 implementation of HttpObjectAggregator.handleOversizedMessage closes the
connection if the client sent oversized chunked data with no Expect:
100-continue header. This causes a broken pipe or "connection reset by
peer" error in some clients (tested on Firefox 31 OS X 10.9.5,
async-http-client 1.8.14).
This part of the HTTP 1.1 spec (below) seems to say that in this scenario the connection
should not be closed (unless the intention is to be very strict about
how data should be sent).
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html
"If an origin server receives a request that does not include an
Expect request-header field with the "100-continue" expectation,
the request includes a request body, and the server responds
with a final status code before reading the entire request body
from the transport connection, then the server SHOULD NOT close
the transport connection until it has read the entire request,
or until the client closes the connection. Otherwise, the client
might not reliably receive the response message. However, this
requirement is not be construed as preventing a server from
defending itself against denial-of-service attacks, or from
badly broken client implementations."
Modifications:
Change HttpObjectAggregator.handleOversizedMessage to close the
connection only if keep-alive is off and Expect: 100-continue is
missing. Update test to reflect the change.
Result:
Broken pipe and connection reset errors on the client are avoided when
oversized data is sent.
Related: #2983
Motivation:
It is a well known idiom to write an empty buffer and add a listener to
its future to close a channel when the last byte has been written out:
ChannelFuture f = channel.writeAndFlush(Unpooled.EMPTY_BUFFER);
f.addListener(ChannelFutureListener.CLOSE);
When HttpObjectEncoder is in the pipeline, this still works, but it
silently raises an IllegalStateException, because HttpObjectEncoder does
not allow writing a ByteBuf when it is expecting an HttpMessage.
Modifications:
- Handle an empty ByteBuf specially in HttpObjectEncoder, so that
writing an empty buffer does not fail even if the pipeline contains an
HttpObjectEncoder
- Add a test
Result:
An exception is not triggered anymore by HttpObjectEncoder, when a user
attempts to write an empty buffer.
Motivation:
Currently, when the CorsHandler processes a preflight request, or
respondes with an 403 Forbidden using the short-curcuit option, the
HttpRequest is not released which leads to a buffer leak.
Modifications:
Releasing the HttpRequest when done processing a preflight request or
responding with an 403.
Result:
Using the CorsHandler will not cause buffer leaks.
Motivation:
I was not fully reassured that whether everything works correctly when a websocket client receives the websocket handshake HTTP response and a websocket frame in a single ByteBuf (which can happen when the server sends a response directly or shortly after the connect). In this case some parts of the ByteBuf must be processed by HTTP decoder and the remaining by the websocket decoder.
Modification:
Adding a test that verifies that in this scenaria the handshake and the message are correctly interpreted and delivered by Netty.
Result:
One more test for Netty.
The test succeeds - No problems
Motivation:
Websocket performance is to a large account determined through the masking
and unmasking of frames. The current behavior of this in Netty can be
improved.
Modifications:
Perform the XOR operation not bytewise but in int blocks as long as
possible. This reduces the number of necessary operations by 4. Also don't
read the writerIndex in each iteration.
Added a unit test for websocket decoding and encoding for verifiation.
Result:
A large performance gain (up to 50%) in websocket throughput.
Motivation:
Currently we do more memory copies then needed.
Modification:
- Directly use heap buffers to reduce memory copy
- Correctly release buffers to fix buffer leak
Result:
Less memory copies and no leaks
Motivation:
The _0XFF_0X00 buffer is not duplicated and empty after the first usage preventing the connection close to happen on subsequent close frames.
Modifications:
Correctly duplicate the buffer.
Result:
Multiple CloseWebSocketFrames are handled correctly.
Motivation:
If the requests contains uri parameters but not path the HttpRequestEncoder does produce an invalid uri while try to add the missing path.
Modifications:
Correctly handle the case of uri with paramaters but no path.
Result:
HttpRequestEncoder produce correct uri in all cases.
Motivation:
HttpObjectAggregator currently creates a new FullHttpResponse / FullHttpRequest for each message it needs to aggregate. While doing so it also creates 2 DefaultHttpHeader instances (one for the headers and one for the trailing headers). This is bad for two reasons:
- More objects are created then needed and also populate the headers is not for free
- Headers may get validated even if the validation was disabled in the decoder
Modification:
- Wrap the previous created HttpResponse / HttpRequest and so reuse the original HttpHeaders
- Reuse the previous created trailing HttpHeader.
- Fix a bug where the trailing HttpHeader was incorrectly mixed in the headers.
Result:
- Less GC
- Faster HttpObjectAggregator implementation
Motivation:
DecodeResult is dropped when aggregate HTTP messages.
Modification:
Make sure we not drop the DecodeResult while aggregate HTTP messages.
Result:
Correctly include the DecodeResult for later processing.
Motivation:
Due to integer overflow bug, writes of FileRegions to http server pipeline (eg like one from HttpStaticFileServer example) with length greater than Integer.MAX_VALUE are ignored in 1/2 of cases (ie no data gets sent to client)
Modification:
Correctly handle chunk sized > Integer.MAX_VALUE
Result:
Be able to use FileRegion > Integer.MAX_VALUE when using chunked encoding.
Motivation:
Persuit for the consistency in method naming
Modifications:
- Remove the 'get' prefix from all HTTP/SPDY message classes
- Fix some inspector warnings
Result:
Consistency
Motivation:
We have quite a bit of code duplication between HTTP/1, HTTP/2, SPDY,
and STOMP codec, because they all have a notion of 'headers', which is a
multimap of string names and values.
Modifications:
- Add TextHeaders and its default implementation
- Add AsciiString to replace HttpHeaderEntity
- Borrowed some portion from Apache Harmony's java.lang.String.
- Reimplement HttpHeaders, SpdyHeaders, and StompHeaders using
TextHeaders
- Add AsciiHeadersEncoder to reuse the encoding a TextHeaders
- Used a dedicated encoder for HTTP headers for better performance
though
- Remove shortcut methods in SpdyHeaders
- Replace SpdyHeaders.getStatus() with HttpResponseStatus.parseLine()
Result:
- Removed quite a bit of code duplication in the header implementations.
- Slightly better performance thanks to improved header validation and
hash code calculation
Motivation:
According to RFC2616 section 19, boundary string could be quoted, but
currently the PostRequestDecoder does not support it while it should.
Modifications:
Once the boundary is found, one check is made to verify if the boundary
is "quoted", and if so, it is "unqoted".
Note: in following usage of this boundary (as delimiter), quote seems no
more allowed according to the same RFC, so the reason that only the
boundary definition is corrected.
Result:
Now the boundary could be whatever quoted or not. A Junit test case
checks it.
Motivation:
When an attribute is ending with an odd number of CR (0x0D), the decoder
add an extra CR in the decoded attribute and should not.
Modifications:
Each time a CR is detected, the next byte was tested to be LF or not. If
not, in a number of places, the CR byte was lost while it should not be.
When a CR is detected, if the next byte is not LF, the CR byte should be
saved as the position point to the next byte (not LF). When a CR is
detected, if there is not yet other available bytes, the position is
reset to the position of CR (since a LF could follow).
A new Junit test case is added, using DECODER and variable number of CR
in the final attribute (testMultipartCodecWithCRasEndOfAttribute).
Result:
The attribute is now correctly decoded with the right number of CR
ending bytes.
Motivation:
We have different message aggregator implementations for different
protocols, but they are very similar with each other. They all stems
from HttpObjectAggregator. If we provide an abstract class that provide
generic message aggregation functionality, we will remove their code
duplication.
Modifications:
- Add MessageAggregator which provides generic message aggregation
- Reimplement all existing aggregators using MessageAggregator
- Add DecoderResultProvider interface and extend it wherever possible so
that MessageAggregator respects the state of the decoded message
Result:
Less code duplication
Motivation:
CORS request are currently processed, and potentially failed, after the
target ChannelHandler(s) have been invoked. This might not be desired, for
example a HTTP PUT or POST might have been performed.
Modifications:
Added a shortCurcuit option to CorsConfig which when set will
cause a validation of the HTTP request's 'Origin' header and verify that
it is valid according to the configuration. If found invalid an 403
"Forbidden" response will be returned and not further processing will
take place.
This is indeed no help for non browser request, like using curl, which
can set the 'Origin' header.
Result:
Users can now configure if the 'Origin' header should be validated
upfront and have the request rejected before any further processing
takes place.
Motivation:
Because of not correctly release a buffer before null out the reference a memory leak shows up.
Modifications:
Correct call buffer.release() before null out reference.
Result:
No more leak
Motivation:
When CORS has been configured to allow "*" origin, and at the same time
is allowing credentials/cookies, this causes an error from the browser
because when the response 'Access-Control-Allow-Credentials' header
is true, the 'Access-Control-Allow-Origin' must be an actual origin.
Modifications:
Changed CorsHandler setOrigin method to check for the combination of "*"
origin and allowCredentials, and if the check matches echo the CORS
request's 'Origin' value.
Result:
This addition enables the echoing of the request 'Origin' value as the
'Access-Control-Allow-Origin' value when the server has been configured
to allow any origin in combination with allowCredentials.
This allows client requests to succeed when expecting the server to
be able to handle "*" origin and at the same time be able to send cookies
by setting 'xhr.withCredentials=true'. A concrete example of this is
the SockJS protocol which expects behaviour.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffers of SpdyFrameDecoder and SpdyFrameDecoderTest are released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffer of SpdyFrameDecoder is released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during SPDY test.
Modifications:
Use ReferenceCountUtil.releaseLater(...) to make sure everything is released once the tests are done.
Result:
No more leak reports during run the tests.
Motivation:
Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).
Modifications:
The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.
Result:
SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.
Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.
Result:
Users are now able to configure multiple origins for CORS.
[https://github.com/netty/netty/issues/2346]
Motivation:
When running the build with Java 8 the following error occurred:
java: reference to preflightResponseHeader is ambiguous
both method
<T>preflightResponseHeader(java.lang.CharSequence,java.lang.Iterable<T>)
in io.netty.handler.codec.http.cors.CorsConfig.Builder and method
<T>preflightResponseHeader(java.lang.String,java.util.concurrent.Callable<T>)
in io.netty.handler.codec.http.cors.CorsConfig.Builder match
The offending class was CorsConfigTest and its shouldThrowIfValueIsNull
which contained the following line:
withOrigin("*").preflightResponseHeader("HeaderName", null).build();
Modifications:
Updated the offending method with to supply a type, and object array, to
avoid the error.
Result:
After this I was able to build with Java 7 and Java 8
Motivation:
An intermediary like a load balancer might require that a Cross Origin
Resource Sharing (CORS) preflight request have certain headers set.
As a concrete example the Elastic Load Balancer (ELB) requires the
'Date' and 'Content-Length' header to be set or it will fail with a 502
error code.
This works is an enhancement of https://github.com/netty/netty/pull/2290
Modifications:
CorsConfig has been extended to make additional HTTP response headers
configurable for preflight responses. Since some headers, like the
'Date' header need to be generated each time, m0wfo suggested using a
Callable.
Result:
By default, the 'Date' and 'Content-Lenght' headers will be sent in a
preflight response. This can be overriden and users can specify
any headers that might be required by different intermediaries.
Motivation:
If the last item analyzed in a previous received HttpChunk/HttpContent was a part of an attribute's name, the read index was not set to the new right place and therefore raizing an exception in some case (since the "new" name analyzed is empty, which is not allowed so the exception).
What appears there is that the read index should be reset to the last valid position encountered whatever the case. Currently it was set when only when there is an attribute not already finished (name is ok, but content is possibly not).
Therefore the issue is that elements could be rescanned multiple times (including completed elements) and moreover some bad decoding can occur such as when in a middle of an attribute's name.
Modifications:
To fix this issue, since "firstpos" contains the last "valid" read index of the decoding (when finding a '&', '=', 'CR/LF'), we should add the setting of the read index for the following cases:
'lastchunk' encountered, therefore finishing the current buffer
any other cases than current attribute is not finished (name not found yet in particular)
So adding for this 2 cases:
undecodedChunk.readerIndex(firstpos);
Result:
Now the decoding is done once, content is added from chunk/content to chunk/content, name is decoded correctly even if in the middle of 2 chunks/contents.
A Junit test code was added: testChunkCorrect that should not raized any exception.
