Motivation:
An intermediate list is creating in the `EpollEventLoop#closeAll` to prevent ConcurrentModificationException. But this is not the obvious purpose has no comment.
Modifications:
Add comment to clarify the appointment of the intermediate collection.
Result:
More clear code.
Motivation:
We used an intermediate collection to store the read DatagramPackets and only fired these through the pipeline once wewere done with the reading loop. This is not needed and can also increase memory usage.
Modifications:
Remove intermediate collection
Result:
Less overhead and possible less memory usage during read loop.
Motivation:
We had a typo in the method name of the EpollSocketChannelConfig.
Modifications:
Deprecate old method and introduce a new one.
Result:
Fixes [#6909]
Motivation:
Enable static linking for Java 8. These commits are the same as those introduced to netty tcnative. The goal is to allow lots of JNI libraries to be statically linked together without having conflict `JNI_OnLoad` methods.
Modification:
* add JNI_OnLoad suffixes to enable static linking
* Add static names to the list of libraries that try to be loaded
* Enable compiling with JNI 1.8
* Sort includes
Result:
Enable statically linked JNI code.
The code in question has this comment, but it is *after* the fall
so the static analysis flags it.
This is described in http://errorprone.info/bugpattern/FallThrough
Modifications:
Move fall through comment to where the fall actually occurs
Result:
More compatible with Error Prone tools
Motivation:
Google requires stricter compilation by adding -Werror and enabling many other warnings.
Modification:
* fix warning caused by -Wmissing-braces
* Use the address of `sendmmsg` rather than the function itself when
checking for presence. This resovles the warning caused by
`-Wpointer-bool-conversion`.
More detail:
When compiling on Linux, `sendmmsg` is always present, so the
function is always nonnull. When compiling elsewhere, the
function is defined as `__attribute__((weak))` which means it
may be absent at link time. This is controlled by
`IO_NETTY_SENDMMSG_NOT_FOUND`, which is off by default.
The reason for the error is due to the risk of accidentally not
calling the function. By adding `&` before the function, there
is no ambiguity. (the result of the fn call cannot have its
address taken.)
* use != to check for sendmmsg
Result:
Easier compilation.
Motivation:
This allows netty to operate in 'transparent proxy' mode, intercepting connections
to other addresses by means of Linux firewalling rules, as per
https://www.kernel.org/doc/Documentation/networking/tproxy.txt
The original destination address can be obtained by referencing
ch.localAddress().
Modification:
Add methods similar to those for ipFreeBind, to set the IP_TRANSPARENT option.
Result:
Allows setting and getting of the IP_TRANSPARENT option, which allows retrieval of the ultimate socket address originally requested.
Motivation:
We should not force autoconf and compile as this will result in multiple executions and so slow down the build.
Modifications:
Remove force declarations
Result:
Faster build of native modules
Motivation:
1. special handling of ByteBuf with multi nioBuffer rather than type of CompositeByteBuf (eg. DuplicatedByteBuf with CompositeByteBuf)
2. EpollDatagramUnicastTest and KQueueDatagramUnicastTest passed because CompositeByteBuf is converted to DuplicatedByteBuf before write to channel
3. uninitalized struct msghdr will raise error
Modifications:
1. isBufferCopyNeededForWrite(like isSingleDirectBuffer in NioDatgramChannel) checks wether a new direct buffer is needed
2. special handling of ByteBuf with multi nioBuffer in EpollDatagramChannel, AbstractEpollStreamChannel, KQueueDatagramChannel, AbstractKQueueStreamChannel and IovArray
3. initalize struct msghdr
Result:
handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel are ok
Motivation:
We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.
Modifications:
Check if registered on eventLoop before try to deregister on close.
Result:
Fixes [#6770]
Motivation:
For our native libraries in netty we support shading, to have this work on runtime the user needs to set a system property. This code should shared.
Modifications:
Move logic to NativeLbiraryLoader and so share for all native libs.
Result:
Less code duplication and also will work for netty-tcnative out of the box once it support shading
Motivation:
MacOS will throw an error when attempting to set the IP_TOS socket option if IPv6 is available, and also when getting the value for IP_TOS.
Modifications:
- Socket#setTrafficClass and Socket#getTrafficClass should try to use IPv6 first, and check if the error code indicates the protocol is not supported before trying IPv4
Result:
Fixes https://github.com/netty/netty/issues/6741.
Motivation:
To ensure the release plugin works correctly we need to ensure all modules are included during build.
Modification:
- Include all modules
- Skip compilation and tests for native code when not supported but still include the module and build the jar
Result:
Build and release works again
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.
Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue
Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
Make the FileRegion comments about which transports are supported more accurate.
Also, eleminate any outstanding references to FileRegion.transfered as the method was renamed for spelling.
Modifications:
Class-level comment on FileRegion, can call renamed method.
Result:
More accurate documentation and less calls to deprecated methods.
Motivation:
Exceptions generated from transport-native-epoll may include duplicate error string description or inconsistent usage of the method name in the string description.
Modifications:
- Ensure the method name from static exceptions and dynamic exceptions is of the same format
- Remove duplicate string rational from the exception messages
Result:
More consistent error messages with no duplicate error description.
Motivation:
We missed some stuff in 5728e0eb2c and so the build failed on java9
Modifications:
- Add extra cmdline args when needed
- skip the autobahntestsuite as jython not works with java9
- skip the osgi testsuite as the maven plugin not works with java9
Result:
Build finally passed on java9
Motivation:
EpollDatagramChannel uses getOption in the isActive method. getOption is backed by a relatively large conditional if/else if block and this conditional checking can be avoided in the epoll transport.
Modifications:
- Add EpollDatagramChannelConfig#getActiveOnOpen and use this in EpollDatagramChannel
Result:
Conditional checking due to getOption is removed from EpollDatagramChannel.
Motivation:
When the EPOLLRDHUP event is received we assume that the read side of the FD is no longer functional and force the input state to be shutdown. However if the channel is still active we should rely upon EPOLLIN and read to indicate there is no more data before we update the shutdown state. If we do not do this we may not read all pending data in the FD if the RecvByteBufAllocator doesn't want to consume it all in a single read operation.
Modifications:
- AbstractEpollChannel#epollRdHupReady() shouldn't force shutdown the input if the channel is active
Result:
All data can be read even if the RecvByteBufAllocator doesn't read it all in the current read loop.
Fixes https://github.com/netty/netty/issues/6303
Motivation:
We need to pass special arguments to run with jdk9 as otherwise some tests will not be able to run.
Modifications:
Allow to define extra arguments when running with jdk9
Result:
Tests pass with jdk9
Motivation:
EPOLL annotates some exceptions to provide the remote address, but the original exception is not preserved. This may make determining a root cause more difficult. The static EPOLL exceptions references the native method that failed, but does not provide a description of the actual error number. Without the description users have to know intimate details about the native calls and how they may fail to debug issues.
Modifications:
- annotated exceptions should preserve the original exception
- static exceptions should include the string description of the expected errno
Result:
EPOLL exceptions provide more context and are more useful to end users.
Motivation:
EpollRecvByteAllocatorHandle intends to override the meaning of "maybe more data to read" which is a concept also used in all existing implementations of RecvByteBufAllocator$Handle but the interface doesn't support overriding. Because the interfaces lack the ability to propagate this computation EpollRecvByteAllocatorHandle attempts to implement a heuristic on top of the delegate which may lead to reading when we shouldn't or not reading data.
Modifications:
- Create a new interface ExtendedRecvByteBufAllocator and ExtendedHandle which allows the "maybe more data to read" between interfaces
- Deprecate RecvByteBufAllocator and change all existing implementations to extend ExtendedRecvByteBufAllocator
- transport-native-epoll should require ExtendedRecvByteBufAllocator so the "maybe more data to read" can be propagated to the ExtendedHandle
Result:
Fixes https://github.com/netty/netty/issues/6303.
Motivation:
We should call Epoll.ensureAvailability() when init EpollEventLoopGroup to fail fast and with a proper exception.
Modifications:
Call Epoll.ensureAvailability() during EpollEventLoopGroup init.
Result:
Fail fast if epoll is not availability (for whatever reason).
Motivation:
EpollRecvByteAllocatorHandle will read unconditionally if EPOLLRDHUP has been received. However we can just treat this the same was we do as data maybe pending in ET mode, and let LT mode notify us if we haven't read all data.
Modifications:
- EpollRecvByteAllocatorHandle should not always force a read just because EPOLLRDHUP has been received, but just treated as an indicator that there maybe more data to read in ET mode
Result:
Fixes https://github.com/netty/netty/issues/6173.
Motivation:
In later Java8 versions our Atomic*FieldUpdater are slower then the JDK implementations so we should not use ours anymore. Even worse the JDK implementations provide for example an optimized version of addAndGet(...) using intrinsics which makes it a lot faster for this use-case.
Modifications:
- Remove methods that return our own Atomic*FieldUpdaters.
- Use the JDK implementations everywhere.
Result:
Faster code.
Motivation:
To keep our code clean we should fail the build when unused c code is detected.
Modifications:
- Add '-Wunused-variable' to build flags
Result:
Cleaner code.
Motivation:
When attempting to flamegraph netty w/ epoll it was noticed the stacks are lost going from
java to epoll lib.
Modifications:
added the -fno-omit-framepointer flag to compiler flags to ensure the fp is kept intact
Result:
Flamegraphs will now show native code in the same stack as java code using perf-java-flames
Motivation:
We missed to set active = true in EpollServerDomainSocketChannel.doBind(...) which also means that channelActive(...) was never triggered.
Modifications:
Correct set active = true in doBind(...)
Result:
EpollServerDomainSocketChannel is correctly set to active when bound.
Motivation:
I had a need to know the user credentials of a connected unix domain socket.
Modifications:
Added a class to encapsulate user credentials (UID, GID, and the PID).
Augemented the Socket class to provide the JNI native interface to return this new class
Augemented the c code to call getSockOpts passing <a href=http://man7.org/linux/man-pages/man7/socket.7.html>SO_PEERCRED</a>
Then surfaced the ability to get user credentials in the EpollDomainSocketChannel
Result:
The EpollDomainSocketChannel now has a the following function signature:
public PeerCredentials peerCredentials() throws IOException allowing a caller to get the UID, GID, and PID of the linux process
connected to the unix domain socket.
Motivation:
The previously generated manifest causes a parse exception when loaded into an Apache Felix OSGI container.
Modifications:
Fix parameter delimiter and unbalanced quotes in manifest entry. Suffixed with asterisk so the bundle is resolved on other architectures as well even if native libs won't be loaded.
Result:
Bundle will load properly in OSGI containers.
Motivation:
If an exception is thrown while processing the ready channels in the EventLoop we should still run all tasks as this may allow to recover. For example a OutOfMemoryError may be thrown and runAllTasks() will free up memory again. Beside this we should also ensure we always allow to shutdown even if an exception was thrown.
Modifications:
- Call runAllTasks() in a finally block
- Ensure shutdown is always handles.
Result:
More robust EventLoop implementations for NIO and Epoll.
Motivation:
At the moment only DefaultFileRegion is supported when using the native epoll transport.
Modification:
- Add support for any FileRegion implementation
- Add test case
Result:
Also custom FileRegion implementation are supported when using the epoll transport.
Motivition:
NIO throws ClosedChannelException when a user tries to call shutdown*() on a closed Channel. We should do the same for the EPOLL transport
Modification:
Throw ClosedChannelException when a user tries to call shutdown*() on a closed channel.
Result:
Consistent behavior.
Motivation:
Commit 2c1f17faa2 introduced a regression which could cause NotYetConnectedExceptions when handling RDHUP events.
Modifications:
Correct ignore NotYetConnectedException when handling RDHUP events.
Result:
No more regression.
Motivation:
The NIO transport used an IllegalStateException if a user tried to issue another connect(...) while the connect was still in process. For this case the JDK specified a ConnectPendingException which we should use. The same issues exists in the EPOLL transport. Beside this the EPOLL transport also does not throw the right exceptions for ENETUNREACH and EISCONN errno codes.
Modifications:
- Replace IllegalStateException with ConnectPendingException in NIO and EPOLL transport
- throw correct exceptions for ENETUNREACH and EISCONN in EPOLL transport
- Add test case
Result:
More correct error handling for connect attempts when using NIO and EPOLL transport
Motivation:
We need to ensure we also call fireChannelActive() if the Channel is directly closed in a ChannelFutureListener that is belongs to the promise for the connect. Otherwise we will see missing active events.
Modifications:
Ensure we always call fireChannelActive() if the Channel was active.
Result:
No missing events.
Motivation:
We should throw a NotYetConnectedException when ENOTCONN errno is set. This is also consistent with NIO.
Modification:
Throw correct exception and add test case
Result:
More correct and consistent behavior.
Motivation:
In 4.0 AbstractNioByteChannel has a default of 16 max messages per read. However in 4.1 that constraint was applied at the NioSocketChannel which is not equivalent. In 4.1 AbstractEpollStreamChannel also did not have the default of 16 max messages per read applied.
Modifications:
- Make Nio consistent with 4.0
- Make Epoll consistent with Nio
Result:
Nio and Epoll both have consistent ChannelMetadata and are consistent with 4.0.
Motivation:
The build generates a OSGi bundle with missing Bundle-NativeCode manifest entry.
Modifications:
Add missing manifest entry.
Result:
Be able to use transport-native-epoll in osgi container.
Motivation:
ECONNREFUSED can be a common type of exception when attempting to finish the connection process. Generating a new exception each time can be costly and quickly bloat memory usage.
Modifications:
- Expose ECONNREFUSED from JNI and cache this exception in Socket.finishConnect
Result:
ECONNREFUSED during finish connect doesn't create a new exception each time.
Motiviation:
Sometimes it is useful to allow to specify a custom strategy to handle rejected tasks. For example if someone tries to add tasks from outside the eventloop it may make sense to try to backoff and retries and so give the executor time to recover.
Modification:
Add RejectedEventExecutor interface and implementations and allow to inject it.
Result:
More flexible handling of executor overload.
Motivation:
To restrict the memory usage of a system it is sometimes needed to adjust the number of max pending tasks in the tasks queue.
Modifications:
- Add new constructors to modify the number of allowed pending tasks.
- Add system properties to configure the default values.
Result:
More flexible configuration.
Motivation:
We use pre-instantiated exceptions in various places for performance reasons. These exceptions don't include a stacktrace which makes it hard to know where the exception was thrown. This is especially true as we use the same exception type (for example ChannelClosedException) in different places. Setting some StackTraceElements will provide more context as to where these exceptions original and make debugging easier.
Modifications:
Set a generated StackTraceElement on these pre-instantiated exceptions which at least contains the origin class and method name. The filename and linenumber are specified as unkown (as stated in the javadocs of StackTraceElement).
Result:
Easier to find the origin of a pre-instantiated exception.
Motivation:
Unused methods create warnings on some C compilers. It may not be feasible to selectively turn them off.
Modifications:
Remove createInetSocketAddress as it is unused.
Result:
Less noisy compilation
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Motivation:
epoll_wait accepts a timeout argument which will specify the maximum amount of time the epoll_wait will wait for an event to occur. If the epoll_wait method returns for any reason that is not fatal (e.g. EINTR) the original timeout value is re-used. This does not honor the timeout interface contract and can lead to unbounded time in epoll_wait.
Modifications:
- The time taken by epoll_wait should be decremented before calling epoll_wait again, and if the remaining time is exhausted we should return 0 according to the epoll_wait interface docs http://man7.org/linux/man-pages/man2/epoll_wait.2.html
- link librt which is needed for some platforms to use clock_gettime
Result:
epoll_wait will wait for at most timeout ms according to the epoll_wait interface contract.
Motivation:
Sometimes it may be benefitially for an user to specify a custom algorithm when choose the next EventExecutor/EventLoop.
Modifications:
Allow to specify a custom EventExecutorChooseFactory that allows to customize algorithm.
Result:
More flexible api.
Motivation:
We used transfered in native code which is not correct spelling. It should be transferred.
Modifications:
Fix typo.
Result:
Less typos in source code.
Motivation:
Currenlty, netty-transport-native-epoll-*-linux-x86_64.jar is not packed as OSGi bundle
and thus not working in OSGi environment.
Modifications:
In netty-transport-native-epoll's pom.xml added configuration
to attach manifest to the jar with a native library.
In netty-common's pom.xml added configuration instruction (DynamicImport-Package)
to maven bnd plugin to make sure the native code is loaded from
netty-transport-native-epoll bundle.
Result:
The netty-transport-native-epoll-*-linux-x86_64.jar is a bundle (MANIFEST.MF attached)
and the inluced native library can be successfuly loaded in OSGi environment.
Fixing #5119
Motivation:
SingleThreadEventExecutor.pendingTasks() will call taskQueue.size() to get the number of pending tasks in the queue. This is not safe when using MpscLinkedQueue as size() is only allowed to be called by a single consumer.
Modifications:
Ensure size() is only called from the EventLoop.
Result:
No more livelock possible when call pendingTasks, no matter from which thread it is done.
Motivation:
The DuplexChannel is currently incomplete and only supports shutting down the output side of a channel. This interface should also support shutting down the input side of the channel.
Modifications:
- Add shutdownInput and shutdown methods to the DuplexChannel interface
- Remove state in NIO and OIO for tracking input being shutdown independent of the underlying transport's socket type. Tracking the state independently may lead to inconsistent state.
Result:
DuplexChannel supports shutting down the input side of the channel
Fixes https://github.com/netty/netty/issues/5175
Motivation:
If a task was submitted when wakenUp value was 1, the task didn't get a chance to produce wakeup event. So we need to check task queue again before calling epoll_wait. If we don't, the task might be pended until epoll_wait was timed out. It might be pended until idle timeout if IdleStateHandler existed in pipeline.
Modifications:
Execute epoll_wait in a non-blocking manner if there's a task submitted when wakenUp value was 1.
Result:
Every tasks in EpollEventLoop will not be pended.
Motivation:
EventExecutor.children uses generics in such a way that an entire colleciton must be cast to a specific type of object. This interface is not very flexible and is impossible to implement if the EventExecutor type must be wrapped. The current usage of this method also does not have any clear need within Netty. The Iterator interface allows for EventExecutor to be wrapped and forces the caller to make assumptions about types instead of building the assumptions into the interface.
Motivation:
- Remove EventExecutor.children and undeprecate the iterator() interface
Result:
EventExecutor interface has one less method and is easier to wrap.
Motivation:
When epoll datagram channel invokes sendmmsg0, _all_ of the messages go
on the wire with the address of the _last_ packet in the list.
Modifications:
An array of addresses equal to the length of the messages is allocated
on the stack to hold the address for each msg_hdr.msg_name.
Result:
Each message goes on the wire with the correct address.
Motivation:
NioEventLoopGroup supports constructors which take an executor but EpollEventLoopGroup does not. EPOLL should be consistent with NIO where ever possible.
Modifications:
- Add constructors to EpollEventLoopGroup which accept an Executor as a parameter
Result:
EpollEventLoopGroup is more consistent with NioEventLoopGroup
Fixes https://github.com/netty/netty/issues/5161
Motivation:
Before release 4.1.0.Final we should update all our dependencies.
Modifications:
Update dependencies.
Result:
Up-to-date dependencies used.
Motivation:
Some applications may use alternative methods of loading the epoll JNI symbols. We should support this use case.
Modifications:
Attempt to use a side effect free JNI method. If that fails, load the library.
Result:
Fixes#5122
Motivation:
We missed to correctly retrieve the localAddress() after we called Socket.connect(..) and so the user would always see an incorrect address when calling EpollSocketChannel.localAddress().
Modifications:
- Ensure we always retrieve the localAddress() after we called Socket.connect(...) as only after this we will be able to receive the correct address.
- Add unit test
Result:
Correct and consistent behaviour across different transports (NIO/OIO/EPOLL).
Motivation:
441aa4c575 conditionally set the readFlag based upon if maybeMoreDataToRead is set. It is possible that the read flag will not be set, and nothing will be read by executeEpollInReadyRunnable and no actual data will be read even though the user requested it.
Modifications:
- Always set the readFlag in doBeginRead
- Make it so only a single epollInReadyRunnable can execute for a channel at a time
Result:
Less chance of missing read events in EPOLL transport.
Motivation:
OIO/NIO use a volatile variable to track if a read is pending. EPOLL does not use a volatile an executes a Runnable on the event loop thread to set readPending to false. These mechansims should be consistent, and not using a volatile variable is preferable because the variable is written to frequently in the event loop thread.
OIO also does not set readPending to false before each fireChannelRead operation and may result in reading more data than the user desires.
Modifications:
- OIO/NIO should not use a volatile variable for readPending
- OIO should set readPending to false before each fireChannelRead
Result:
OIO/NIO/EPOLL are more consistent w.r.t. readPending and volatile variable operations are reduced
Fixes https://github.com/netty/netty/issues/5069
Motivation:
441aa4c575 introduced a bug in transport-native-epoll where readPending is set to false before a read is attempted, but this should happen before fireChannelRead is called. The NIO transport also only sets the readPending variable to false on the first read in the event loop. This means that if the user only calls read() on the first channelRead(..) the select loop will still listen for read events even if the user does not call read() on subsequent channelRead() or channelReadComplete() in the same event loop run. If the user only needs 2 channelRead() calls then by default they will may get 14 more channelRead() calls in the current event loop, and then 16 more when the event loop is woken up for a read event. This will also read data off the TCP stack and allow the peer to queue more data in the local RECV buffers.
Modifications:
- readPending should be set to false before each call to channelRead()
- make NIO readPending set to false consistent with EPOLL
Result:
NIO and EPOLL transport set readPending to false at correct times which don't read more data than intended by the user.
Fixes https://github.com/netty/netty/issues/5082
Motivation:
There is a spelling error in FileRegion.transfered() as it should be transferred().
Modifications:
Deprecate old method and add a new one.
Result:
Fix typo and can remove the old method later.