Motivation:
I had the NioSocketChannelTest.testFlushCloseReentrance() fail sometimes on one of my linux installation. This change let it pass all the time.
Modification:
Set the SO_SNDBUF to a small value to force split writes
Result:
Test is passing all the time where it was sometimes fail before.
Motivation:
AbstractEpollChannel.clearEpollIn() throws an IllegalStateException if a user tries to change the autoRead configuration for the Channel and the Channel is not registered on an EventLoop yet. This makes it for example impossible to set AUTO_READ to false via the ServerBootstrap as the configuration is modifed before the Channel is registered.
Modification:
Check if the Channel is registered and if not just modify the flags directly so they are respected once the Channel is registered
Result:
It is possible now to configure AUTO_READ via the ServerBootstrap
Motivation:
We are currently try to modify the events via EpollEventLoop even when the channel was closed before and so the fd was set to -1. This fails with a RuntimeException in this case.
Modification:
Always check if the Channel is still open before try to modify the events.
Result:
No more RuntimeException because of a not open channel
Motivation:
At the moment it is not possible to deregister a LocalChannel from its EventLoop and register it to another one as the LocalChannel is closed during the deregister.
Modification:
Not close the LocalChannel during dergister
Result:
It is now possible to deregister a LocalChannel and register it to another EventLoop
Motivation:
Currently the generics used for TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT are incorrect.
Modifications:
Use Integer as type
Result:
User can use TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT as expected
Motivation:
ThreadLocalRandomTest reveals that ThreadLocalRandom's initial seed generation loop becomes tight if the thread is interrupted.
We currently interrupt ourselves inside the wait loop, which will raise an InterruptedException again in the next iteration, resulting in infinite (up to 3 seconds) exception construction and thread interruptions.
Modification:
- When the initial seed generator thread is interrupted, break out of the wait loop immediately.
- Log properly when the initial seed generation failed due to interruption.
- When failed to generate the initial seed, interrupt the generator thread just in case the SecureRandom implementation handles it properly.
- Make the initial seed generator thread daemon and handle potential exceptions raised due to the interruption.
Result:
No more tight loop on interruption. More robust generator thread termination. Fixes#2412
Motivation:
Some SSLEngine implementations violate the contract and raises an
exception when SslHandler feeds an input buffer that contains multiple
SSL records to SSLEngine.unwrap(), while the expected behavior is to
decode the first record and return.
Modification:
- Modify SslHandler.decode() to keep the lengths of each record and feed
SSLEngine.unwrap() record by record to work around the forementioned
issue.
- Rename unwrap() to unwrapMultiple() and unwrapNonApp()
- Rename unwrap0() to unwrapSingle()
Result:
SslHandler now works OpenSSLEngine from finagle-native. Performance
impact remains unnoticeable. Slightly better readability. Fixes#2116.
Motivation:
The problem with the current snappy implementation is that it does
not comply with framing format definition found on
https://code.google.com/p/snappy/source/browse/trunk/framing_format.txt
The document describes that chunk type of the stream identifier is defined
as 0xff. The current implentation uses 0x80.
Modifications:
This patch replaces the first byte of the chunk type of the stream identifier
with 0xff.
Result:
After this modification the snappy implementation is compliant to the
framing format described at
https://code.google.com/p/snappy/source/browse/trunk/framing_format.txt.
This results in a better compatibility with other implementations.
Motivation:
EpollDatagramChannel produced buffer leaks when tried to read from the channel and nothing was ready to be read.
Modifications:
Correctly release buffer if nothing was read
Result:
No buffer leak
Motivation:
Allow to set TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT in native transport to offer the user with more flexibility.
Modifications:
Expose methods to set these options and write the JNI implementation.
Result:
User can now use TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT.
Motivation:
Some Android SSLEngine implementations skip FINISHED handshake status
and go straightly into NOT_HANDSHAKING. This behavior blocks SslHandler
from notifying its handshakeFuture, because we do the notification when
SSLEngine enters the FINISHED state.
Modification:
When the current handshake state is NOT_HANDSHAKING and the
handshakeFuture is not fulfilled yet, treat NOT_HANDSHAKING as FINISHED.
Result:
Better Android compatibility - fixes#1823
Motivation:
Once a user implement a custom ChannelHandlerInvoker it is needed to validate the ChannelPromise. We should expose a utility method for this.
Modifications:
Move validatePromise(...) from DefaultChannelHandlerInvoker to ChannelHandlerInvokerUtil and make it public.
Result:
User is able to reuse code
Motivation:
Make it more clear what the output of HttpObjectAggregator is and that it need to come after the encoder in the pipeline.
Modifications:
Change javadocs to make things more clear.
Result:
Better docs
Motivation:
At the moment it is possible to see a NPE when the LocalSocketChannels doRegister() method is called and the LocalSocketChannels doClose() method is called before the registration was completed.
Modifications:
Make sure we delay the actual close until the registration task was executed.
Result:
No more NPE
Motivation:
With SO_REUSEPORT it is possible to bind multiple sockets to the same port and so handle the processing of packets via multiple threads. This allows to handle DatagramPackets with more then one thread on the same port and so gives better performance.
Modifications:
Expose EpollDatagramChannelConfig.setReusePort(..) and isReusePort()
Result:
Allow to bind multiple times to the same local address and so archive better performance.
Motivation:
At the moment ChanneConfig.setAutoRead(false) only is guaranteer to not have an extra channelRead(...) triggered when used from within the channelRead(...) or channelReadComplete(...) method. This is not the correct behaviour as it should also work from other methods that are triggered from within the EventLoop. For example a valid use case is to have it called from within a ChannelFutureListener, which currently not work as expected.
Beside this there is another bug which is kind of related. Currently Channel.read() will not work as expected for OIO as we will stop try to read even if nothing could be read there after one read operation on the socket (when the SO_TIMEOUT kicks in).
Modifications:
Implement the logic the right way for the NIO/OIO/SCTP and native transport, specific to the transport implementation. Also correctly handle Channel.read() for OIO transport by trigger a new read if SO_TIMEOUT was catched.
Result:
It is now also possible to use ChannelConfig.setAutoRead(false) from other methods that are called from within the EventLoop and have direct effect.
Conflicts:
transport-sctp/src/main/java/io/netty/channel/sctp/nio/NioSctpChannel.java
transport/src/main/java/io/netty/channel/socket/nio/NioDatagramChannel.java
transport/src/main/java/io/netty/channel/socket/nio/NioSocketChannel.java
Motivation:
There is currently no epoll based DatagramChannel. We should add one to make the set of provided channels complete and also to be able to offer better performance compared to the NioDatagramChannel once SO_REUSEPORT is implemented.
Modifications:
Add implementation of DatagramChannel which uses epoll. This implementation does currently not support multicast yet which will me implemented later on. As most users will not use multicast anyway I think it is fair to just add the EpollDatagramChannel without the support for now. We shipped NioDatagramChannel without support earlier too ...
Result:
Be able to use EpollDatagramChannel for max. performance on linux
Motivation:
In linux kernel 3.9 a new featured named SO_REUSEPORT was introduced which allows to have multiple sockets bind to the same port and so handle the accept() of new connections with multiple threads. This can greatly improve the performance when you not to accept a lot of connections.
Modifications:
Implement SO_REUSEPORT via JNI
Result:
Be able to use the SO_REUSEPORT feature when using the EpollServerSocketChannel
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffers of SpdyFrameDecoder and SpdyFrameDecoderTest are released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffer of SpdyFrameDecoder is released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during SPDY test.
Modifications:
Use ReferenceCountUtil.releaseLater(...) to make sure everything is released once the tests are done.
Result:
No more leak reports during run the tests.
Motivation:
Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).
Modifications:
The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.
Result:
SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
Motivation:
PoolArena's 'normalizeCapacity' function was micro-optimized some
time ago to remove a while loop. However, there was a change of
behavior in the function as a result. Capacities passed into it
that are already powers of 2 (and >= 512) are doubled in size. So
if I ask for a buffer with a capacity of 1024, I will get back one
that actually uses 2048 bytes (stored in maxLength).
Aligning to powers of two for book keeping ease is reasonable,
and if someone tries to expand a buffer, you might as well use some
of the previously wasted space. However, since this distinction
between 'easily expanded' and 'costly to expand' space is not
supported at all by the APIs, I cannot imagine this change to
doubling is desirable or intentional.
This is especially costly when using composite buffers. They
frequently allocate components with a capacity that is a power of
2, and they never attempt to expand components themselves. The end
result is that heavy use of pool-backed composite buffers wastes
almost half of the memory pool (the smaller / initial components are
<512 and so are not affected by the off-by-one bug).
Modifications:
Although I find it difficult to believe that such an optimization
is really helpful, I left it in and fixed the off-by-one issue by
decrementing the value at the start.
I also added a simple test to both attempt to verify that the
decrement fixes the issue without introducing any other change, and
to make it easy for a reviewer to test the existing behavior. PoolArena
does not seem to have much testing or testability support though so
the test is kind of a hack and will break for unrelated changes. I
suggest either removing it or factoring out the single non-static
portion of normalizeCapacity so that the fragile dummy PoolArena is
not required.
Result:
Pooled allocators will allocate less resources to the highly
inefficient and undocumented buffer section between length and
maxLength.
Composite buffers of non-trivial size that are backed by pooled
allocators will use about half as much memory.
Motivation:
At the moment we create a HashMap that holds the MembershipKeys for multicast with every NioDatagramChannel even when most people not need it at al
Modifications:
Lazy create the HashMap when needed.
Result:
Less memory usage and less object creation
Motivation:
Currently, there exists no example which shows how to use the memcache binary
protocol.
Modifications:
Add an example client and client handler to show how to utilize the binary
protocol in a memcache client with a simple interactive shell.
Result:
Users looking for an example can now start off with the provided one.
Motivation:
We sometimes see data corruption when writing to the EpollSocketChannel.
Modifications:
Correctly update the position of the ByteBuffer after something was written.
Result:
Fix data-corruption which could happen on partial writes
Motivation:
At the moment we create new ThreadPoolCache whenever a Thread tries either allocate or release something on the PooledByteBufAllocator. When something is released we put it then in its ThreadPoolCache. The problem is we never check if a Thread is not alive anymore and so we may end up with memory that is never freed again if a user create many short living Threads that use the PooledByteBufAllocator.
Modifications:
Periodically check if the Thread is still alive that has a ThreadPoolCache assinged and if not free it.
Result:
Memory is freed up correctly even for short living Threads.
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
At the moment a user can not safetly call slice().retain() or duplicate.retain()in the ByteToMessageDecoder.decode(...) implementation without the risk to see coruption because we may call discardSomeReadBytes() to make room on the buffer once the handling is done.
Modifications:
Check for the refCnt() before call discardSomeReadBytes() and also check before call decode(...) to create a copy if needed.
Result:
The user can safetly call slice().retain() or duplicate.retain() in his/her ByteToMessageDecoder.decode(...) method.
Motivation:
Because we not null out the array entry in the SelectionKey[] which is produced by SelectedSelectionKeySet.flip() we may end up with a few SelectionKeyreferences still hanging around here even after the Channel was closed. As these entries may be present at the end of the SelectionKey[] which is never updated for a long time as not enough SelectionKeys are ready.
Modifications:
Once we access the SelectionKey out of the SelectionKey[] we directly null it out.
Result:
Reference can be GC'ed right away once the Channel was closed.
Motivation:
EpollSocketChannel.remoteAddress0() is always null on accepted EpollSocketChannels as we not set it excplicit.
Modifications:
Correctly retrieve the local and remote address when accept new channel and store it
Result:
EpollSocketchannel.remoteAddress0() and EpollSocketChannel.localAddress0() return correct addresses
Motivation:
At the moment we do a Channel.isActive() check in every AbstractChannel.AbstractUnsafe.write(...) call which gives quite some overhead as shown in the profiler when you write fast enough. We can eliminate the check and do something more smart here.
Modifications:
Remove the isActive() check and just check if the ChannelOutboundBuffer was set to null before, which means the Channel was closed. The rest will be handled in flush0() anyway.
Result:
Less overhead when doing many write calls
Motivation:
Native.epollCreate(...) fails on systems using a kernel < 2.6.27 / glibc < 2.9 because it uses epoll_create1(...) without checking if it is present
Modifications:
Check if epoll_create1(...) exists abd if not fall back to use epoll_create(...)
Result:
Works even on systems with kernel < 2.6.27 / glibc < 2.9
Motivation:
In SslHandler.safeClose(...) we attach a ChannelFutureListener to the flushFuture and will notify the ChannelPromise which was used for close(...) in it. The problem here is that we only call ChannelHandlerContext.close(ChannelPromise) if Channel.isActive() is true and otherwise not notify it at all. We should just call ChannelHandlerContext.close(ChannelPromise) in all cases.
Modifications:
Always call ChannelHandlerContext.close(ChannelPromise) in the ChannelFutureListeiner
Result:
ChannelPromise used for close the Channel is notified in all cases
Motivation:
At the moment an IllegalArgumentException will be thrown if a ChannelPromise is cancelled while propagate through the ChannelPipeline. This is not correct, we should just stop to propagate it as it is valid to cancel at any time.
Modifications:
Stop propagate the operation through the ChannelPipeline once a ChannelPromise is cancelled.
Result:
No more IllegalArgumentException when cancel a ChannelPromise while moving through the ChannelPipeline.
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.
Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.
Result:
Users are now able to configure multiple origins for CORS.
[https://github.com/netty/netty/issues/2346]
Motivation:
In ChunkedWriteHandler, there is a redundant variable that servers
no purpose. It implies that under some conditions you might not want
to flush.
Modifications:
Removed the variable and the if condition that read it. The boolean
was always true so just removing the if statement was fine.
Result:
Slightly less misleading code.
Motivation:
Reduce memory usage in ProtobufVarint32LengthFieldPrepender.
Modifications:
Explicit set the buffer size that is needed for the header (between 1 and 5 bytes).
Result:
Less memory usage in ProtobufVarint32LengthFieldPrepender.
Motivation:
While the default thread model provided by Netty is reasonable enough for most applications, some users might have a special requirement for the thread model. Here are a few examples:
- A user might want to invoke handlers from the caller thread directly, assuming that his or her application is completely asynchronous and does not make any invocation from non-I/O thread. In this case, the default invoker implementation will only add the overhead of checking if the current thread is an I/O thread or not.
- A user might want to invoke handlers from different threads depending on the type of events flexibly.
Modifications:
- Backport 132af3a485 which is a fix for #1912
- Add a new interface called 'ChannelHandlerInvoker' that performs the invocation of event handler methods.
- Add pipeline manipulation methods that accept ChannelHandlerInvoker
- The differences from the original commit:
- Separated the irrelevant changes out
- Channel.eventLoop is null until the registration is complete in this branch, so Channel.Unsafe.invoker() doesn't work before registration.
- Deregistration is not gone in this branch, so the methods related with deregistration were added to ChannelHandlerInvoker
Motivation:
MultithreadEventLoopGroup.newChild() does not override MultithreadEventExecutorGroup.newChild() which returns EventExecutor. MultithreadEventLoopGroup.newChild() should never return an EventExecutor, so this is incorrect.
Modifications:
Override MultithreadEventLoopGroup.newChild() so that it returns EventLoop
Result:
Correct API
Motivation:
EventExecutor.iterator() is fixed to return Iterator<EventExecutor> and there's no way to change that as long as we don't extend Iterable. However, a user should have a way to cast the returned set of executors painlessly. Currently, it is only possible with an explicit cast like (Iterator<NioEventLoop>).
Modifications:
Instead, I added a new method called 'children()' which returns an immutable collection of child executors whose method signature looks like the following:
<E extends EventExecutor> Set<E> children();
Result:
A user can now do this:
Set<NioEventLoop> loops = group.children();
for (NioEventLoop l: loops) { ... }
Unfortunately, this is not possible:
for (NioEventLoop l: group.children()) { ... }
However, it's still a gain that a user doesn't need to down-cast explicitly and to add the '@SuppressWarnings` annotation.
Motivation:
LocalEventLoopGroup and LocalEventLoop are not really special for LocalChannels. It can be used for other channel implementations as long as they don't require special handling.
Modifications:
- Add DefaultEventLoopGroup and DefaultEventLoop
- Deprecate LocalEventLoopGroup and make it extend DefaultEventLoopGroup
- Add DefaultEventLoop and remove LocalEventLoop
- Fix inspector warnings
Result:
- Better class names.
Motivation:
There's no reason to keep our users from using DefaultEventExecutor directly. It should be actually very useful to them.
Modifications:
Make DefaultEventExecutor public and add useful public constructors.
Result:
DefaultEventExecutor got usable by anyone, yielding more value as a generic library.
Motivation:
AbstractEventExecutor and AbstractEventExecutorGroup have hard-coded magic timeout numbers. They should have the same timeout numbers, but it's easy to break that rule because they are hard-coded in each place.
Modifications:
Add package private constants to AbstractEventExecutor and let AbstractEventExecutorGroup use them.
Result:
Single timeout change affects two classes.
Motivation:
EventExecutor.parent() and EventLoop.parent() almost always return a constant parent executor. There's not much reason to let it implemented in subclasses.
Modifications:
- Implement AbstractEventExecutor.parent() with an additional contructor
- Add AbstractEventLoop so that subclasses extend AbstractEventLoop, which implements parent() appropriately
- Remove redundant parent() implementations in the subclasses
- Fix inspector warnings
Result:
Less duplication.
Motivation:
At the moment we use the system-wide default selector provider for this invocation of the Java virtual machine when constructing a new NIO channel, which makes using an alternative SelectorProvider practically useless.
This change allows user specify his/her preferred SelectorProvider.
Modifications:
Add SelectorProvider as a param for current `private static *Channel newSocket` method of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel.
Change default constructors of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel to use DEFAULT_SELECTOR_PROVIDER when calling newSocket(SelectorProvider).
Add new constructors for NioSocketChannel, NioServerSocketChannel and NioDatagramChannel which allow user specify his/her preferred SelectorProvider.
Result:
Now users can specify his/her preferred SelectorProvider when constructing an NIO channel.
Motivation:
Make sure the remote/local InetSocketAddress can be obtained correctly
Modifications:
Set the remote/local InetSocketAddress after a bind/connect operation was performed
Result:
It is possible to still access the informations even after the fd became invalid. This mirror the behaviour of NIO.
Motivation:
Previously, we used URLDecoder.decode(...) to decode url-encoded data. This generates a lot of garbage and takes a considerable amount of time.
Modifications:
Replace URLDecoder.decode(...) with QueryStringDecoder.decodeComponent(...)
Result:
Less garbage to GC and faster decode processing.
