Commit Graph

494 Commits

Author SHA1 Message Date
Scott Mitchell
ce4b4da583 SocketStringEchoTest improvements
Motivation:
SocketStringEchoTest has been observed to fail and it has numerous issues which when resolved may help reduce the test failures.

Modifications:
- A volatile counter and a spin/sleep loop is used to trigger test termination. Incrementing a volatile is generally bad practice and can be avoided in this situation. This mechanism can be replaced by a promise. This mechanism should also trigger upon exception or channel inactive.
- Asserts are done in the Netty threads. Although these should result in a exceptionCaught the test may not observe these failures because it is spinning waiting for the count to reach the desired value.

Result:
Cleaner test.
2017-08-11 07:12:35 +02:00
Norman Maurer
f8b495b2f2 Correctly support SO_TIMEOUT for OioDatagramChannel
Motivation:

We need to support SO_TIMEOUT for the OioDatagramChannel but we miss this atm as we not have special handling for it in the DatagramChannelConfig impl that we use. Because of this the following log lines showed up when running the testsuite:

20:31:26.299 [main] WARN  io.netty.bootstrap.Bootstrap - Unknown channel option 'SO_TIMEOUT' for channel '[id: 0x7cb9183c]'

Modifications:

- Add OioDatagramChannelConfig and impl
- Correctly set SO_TIMEOUT in testsuite

Result:

Support SO_TIMEOUT for OioDatagramChannel and so faster execution of datagram related tests in the testsuite
2017-08-08 09:08:33 +02:00
Scott Mitchell
237a4da1b7 Shutting down the outbound side of the channel should not accept future writes
Motivation:
Implementations of DuplexChannel delegate the shutdownOutput to the underlying transport, but do not take any action on the ChannelOutboundBuffer. In the event of a write failure due to the underlying transport failing and application may attempt to shutdown the output and allow the read side the transport to finish and detect the close. However this may result in an issue where writes are failed, this generates a writability change, we continue to write more data, and this may lead to another writability change, and this loop may continue. Shutting down the output should fail all pending writes and not allow any future writes to avoid this scenario.

Modifications:
- Implementations of DuplexChannel should null out the ChannelOutboundBuffer and fail all pending writes

Result:
More controlled sequencing for shutting down the output side of a channel.
2017-08-04 10:59:57 -07:00
Norman Maurer
4bb89dcc54 Correctly handle connect/disconnect in EpollDatagramChannel / KQueueDatagramChannel
Motivation:

We did not correctly handle connect() and disconnect() in EpollDatagramChannel / KQueueDatagramChannel and so the behavior was different compared to NioDatagramChannel.

Modifications:

- Correct implement connect and disconnect methods
- Share connect and related code
- Add tests

Result:

EpollDatagramChannel / KQueueDatagramChannel also supports correctly connect() and disconnect() methods.
2017-08-04 09:22:53 +02:00
Norman Maurer
52f384b37f [maven-release-plugin] prepare for next development iteration 2017-08-02 12:55:10 +00:00
Norman Maurer
8cc1071881 [maven-release-plugin] prepare release netty-4.1.14.Final 2017-08-02 12:54:51 +00:00
Norman Maurer
3cdff36821 Update tests to not use TestUtils.getFreePort() and so ensure we not try to use a port that is used by the system in the meantime.
Motivation:

We should not try to detect a free port in tests put just use 0 when bind so there is no race in which the system my bind something to the port we choosen before.

Modifications:

- Remove the usage of TestUtils.getFreePort() in the testsuite
- Remove hack to workaround bind errors which will not happen anymore now

Result:

Less flacky tests.
2017-07-20 08:25:37 +02:00
Norman Maurer
e6a399a778 Explicit specify hostaddress during tests to ensure testsuite pass on docker (mac)
Motivation:

When run the current testsuite on docker (mac) it will fail a few tests with:

io.netty.channel.AbstractChannel$AnnotatedConnectException: connect(..) failed: Cannot assign requested address: /0:0:0:0:0:0:0:0%0:46607
Caused by: java.net.ConnectException: connect(..) failed: Cannot assign requested address

Modifications:

Specify host explicit as done in other tests to only use ipv6 when really supported.

Result:

Build pass on docker as well
2017-07-18 07:24:04 +02:00
Norman Maurer
2a376eeb1b [maven-release-plugin] prepare for next development iteration 2017-07-06 13:24:06 +02:00
Norman Maurer
c7f8168324 [maven-release-plugin] prepare release netty-4.1.13.Final 2017-07-06 13:23:51 +02:00
Norman Maurer
fd67a2354d [maven-release-plugin] prepare for next development iteration 2017-06-08 21:06:24 +02:00
Norman Maurer
3acd5c68ea [maven-release-plugin] prepare release netty-4.1.12.Final 2017-06-08 21:06:01 +02:00
Norman Maurer
047da11086 Correctly handle ByteBuf implementations which have no memoryAddress when writing to native transport
Motivation:

Commit 3c4dfed08a introduced a regression in handling buffers that have no memoryAddress.

Modifications:

Fix regression and also add unit tests.

Result:

It's possible again to write buffers without memory address.
2017-06-07 19:36:05 +02:00
louxiu
3c4dfed08a Fix handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel
Motivation:
1. special handling of ByteBuf with multi nioBuffer rather than type of CompositeByteBuf (eg. DuplicatedByteBuf with CompositeByteBuf)
2. EpollDatagramUnicastTest and KQueueDatagramUnicastTest passed because CompositeByteBuf is converted to DuplicatedByteBuf before write to channel
3. uninitalized struct msghdr will raise error

Modifications:
1. isBufferCopyNeededForWrite(like isSingleDirectBuffer in NioDatgramChannel) checks wether a new direct buffer is needed
2. special handling of ByteBuf with multi nioBuffer in EpollDatagramChannel, AbstractEpollStreamChannel, KQueueDatagramChannel, AbstractKQueueStreamChannel and IovArray
3. initalize struct msghdr

Result:
handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel are ok
2017-05-26 07:56:34 +02:00
Norman Maurer
2f8fe2af01 Only try to deregister from EventLoop when the native Channel was registered before.
Motivation:

We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.

Modifications:

Check if registered on eventLoop before try to deregister on close.

Result:

Fixes [#6770]
2017-05-24 13:19:18 +02:00
Norman Maurer
0db2901f4d [maven-release-plugin] prepare for next development iteration 2017-05-11 16:00:55 +02:00
Norman Maurer
f7a19d330c [maven-release-plugin] prepare release netty-4.1.11.Final 2017-05-11 16:00:16 +02:00
Scott Mitchell
3cc4052963 New native transport for kqueue
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.

Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue

Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
2017-05-03 09:53:22 -07:00
Norman Maurer
6915ec3bb9 [maven-release-plugin] prepare for next development iteration 2017-04-29 14:10:00 +02:00
Norman Maurer
f30f242fee [maven-release-plugin] prepare release netty-4.1.10.Final 2017-04-29 14:09:32 +02:00
Nikolay Fedorovskikh
0692bf1b6a fix the typos 2017-04-20 04:56:09 +02:00
Norman Maurer
2b8c8e0805 [maven-release-plugin] prepare for next development iteration 2017-03-10 07:46:17 +01:00
Norman Maurer
1db58ea980 [maven-release-plugin] prepare release netty-4.1.9.Final 2017-03-10 07:45:28 +01:00
Jason Brown
3861b7de2b Motivation:
Make the FileRegion comments about which transports are supported more accurate.
Also, eleminate any outstanding references to FileRegion.transfered as the method was renamed for spelling.

Modifications:

Class-level comment on FileRegion, can call renamed method.

Result:

More accurate documentation and less calls to deprecated methods.
2017-03-06 14:43:52 -08:00
Nikolay Fedorovskikh
943f4ec7ff Make methods 'static' where it missed
Motivation:

Calling a static method is faster then dynamic

Modifications:

Add 'static' keyword for methods where it missed

Result:

A bit faster method calls
2017-02-23 11:01:57 +01:00
Norman Maurer
2a72c87673 Move AutobahnTestsuite to extra module
Motivation:
We should move the AutobahnTestsuite to an extra module. This allows easier to run only the testsuite or only the autobahntestsuite

Modifications:

Create a new module (testsuite-autobahn)

Result:

Better project structure.
2017-02-21 10:13:31 +01:00
Norman Maurer
576baf8e6c Update to autobahntestsuite-maven-plugin 0.1.4 to support Java9
Motivation:

autobahntestsuite-maven-plugin 0.1.4 was released and supports Java9.

Modifications:

Update plugin to be able to run tests on Java9

Result:

Autobahntestsuite can also be run on Java9.
2017-02-20 20:54:14 +01:00
Norman Maurer
fbf0e5f4dd Prefer JDK ThreadLocalRandom implementation over ours.
Motivation:

We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7

Modification:

Using ThreadLocalRandom implementation of the JDK when possible.

Result:

Make use of JDK implementations when possible.
2017-02-16 15:44:00 -08:00
Norman Maurer
c5324ea48c Make netty build work on Java9
Motivation:

We missed some stuff in 5728e0eb2c and so the build failed on java9

Modifications:

- Add extra cmdline args when needed
- skip the autobahntestsuite as jython not works with java9
- skip the osgi testsuite as the maven plugin not works with java9

Result:

Build finally passed on java9
2017-02-16 20:26:30 +01:00
Scott Mitchell
f3dd410142 EPOLLRDHUP prematurely marking input as shutdown
Motivation:
When the EPOLLRDHUP event is received we assume that the read side of the FD is no longer functional and force the input state to be shutdown. However if the channel is still active we should rely upon EPOLLIN and read to indicate there is no more data before we update the shutdown state. If we do not do this we may not read all pending data in the FD if the RecvByteBufAllocator doesn't want to consume it all in a single read operation.

Modifications:
- AbstractEpollChannel#epollRdHupReady() shouldn't force shutdown the input if the channel is active

Result:
All data can be read even if the RecvByteBufAllocator doesn't read it all in the current read loop.
Fixes https://github.com/netty/netty/issues/6303
2017-02-16 08:40:32 -08:00
Norman Maurer
5728e0eb2c Use the correct arguments when run with jdk9
Motivation:

We need to pass special arguments to run with jdk9 as otherwise some tests will not be able to run.

Modifications:

Allow to define extra arguments when running with jdk9

Result:

Tests pass with jdk9
2017-02-15 10:15:00 +01:00
Scott Mitchell
a1b5b5dcca EpollRecvByteAllocatorHandle doesn't inform delegate of more data
Motivation:
EpollRecvByteAllocatorHandle intends to override the meaning of "maybe more data to read" which is a concept also used in all existing implementations of RecvByteBufAllocator$Handle but the interface doesn't support overriding. Because the interfaces lack the ability to propagate this computation EpollRecvByteAllocatorHandle attempts to implement a heuristic on top of the delegate which may lead to reading when we shouldn't or not reading data.

Modifications:
- Create a new interface ExtendedRecvByteBufAllocator and ExtendedHandle which allows the "maybe more data to read" between interfaces
- Deprecate RecvByteBufAllocator and change all existing implementations to extend ExtendedRecvByteBufAllocator
- transport-native-epoll should require ExtendedRecvByteBufAllocator so the "maybe more data to read" can be propagated to the ExtendedHandle

Result:
Fixes https://github.com/netty/netty/issues/6303.
2017-02-13 17:42:24 -08:00
Norman Maurer
a7c0ff665c Only use Mockito for mocking.
Motivation:

We used various mocking frameworks. We should only use one...

Modifications:

Make usage of mocking framework consistent by only using Mockito.

Result:

Less dependencies and more consistent mocking usage.
2017-02-07 08:47:22 +01:00
Norman Maurer
735d6dd636 [maven-release-plugin] prepare for next development iteration 2017-01-30 15:14:02 +01:00
Norman Maurer
76e22e63f3 [maven-release-plugin] prepare release netty-4.1.8.Final 2017-01-30 15:12:36 +01:00
Tim Brooks
3344cd21ac Wrap operations requiring SocketPermission with doPrivileged blocks
Motivation:

Currently Netty does not wrap socket connect, bind, or accept
operations in doPrivileged blocks. Nor does it wrap cases where a dns
lookup might happen.

This prevents an application utilizing the SecurityManager from
isolating SocketPermissions to Netty.

Modifications:

I have introduced a class (SocketUtils) that wraps operations
requiring SocketPermissions in doPrivileged blocks.

Result:

A user of Netty can grant SocketPermissions explicitly to the Netty
jar, without granting it to the rest of their application.
2017-01-19 21:12:52 +01:00
Norman Maurer
7f01da8d0f [maven-release-plugin] prepare for next development iteration 2017-01-12 11:36:51 +01:00
Norman Maurer
7a21eb1178 [maven-release-plugin] prepare release netty-4.1.7.Final 2017-01-12 11:35:58 +01:00
Norman Maurer
0bc30a123e Eliminate usage of releaseLater(...) to reduce memory usage during tests
Motiviation:

We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.

Modifications:

- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.

Result:

Less memory needed to build netty while running the tests.
2016-11-18 09:34:11 +01:00
Norman Maurer
5f533b7358 [maven-release-plugin] prepare for next development iteration 2016-10-14 13:20:41 +02:00
Norman Maurer
35fb0babe2 [maven-release-plugin] prepare release netty-4.1.6.Final 2016-10-14 12:47:19 +02:00
Scott Mitchell
7e62f9fcdb SocketSslEchoTest failure
Motivation:
8ba5b5f740 removed some ciphers from the default list, and SocketSslEchoTest had one of these ciphers hard coded in the test. The test will fail if the cihper is not supported by default.

Modifications:
SocketSslEchoTest should ensure a cipher is used which will be supported by the peer

Result:
Test result no longer depends upon default cipher list.
2016-10-11 17:47:59 -07:00
radai-rosenblatt
15ac6c4a1f Clean-up unused imports
Motivation:

the build doesnt seem to enforce this, so they piled up

Modifications:

removed unused import lines

Result:

less unused imports

Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
2016-09-30 09:08:50 +02:00
Norman Maurer
2c4a7a2539 [#5800] Support any FileRegion implementation when using epoll transport
Motivation:

At the moment only DefaultFileRegion is supported when using the native epoll transport.

Modification:

- Add support for any FileRegion implementation
- Add test case

Result:

Also custom FileRegion implementation are supported when using the epoll transport.
2016-09-15 23:03:37 -07:00
Norman Maurer
54b1a100f4 [maven-release-plugin] prepare for next development iteration 2016-08-26 10:06:32 +02:00
Norman Maurer
eb450d8b2f Correct throw ClosedChannelException when attempt to call shutdown*(...) on closed EpollSocketChannel.
Motivition:

NIO throws ClosedChannelException when a user tries to call shutdown*() on a closed Channel. We should do the same for the EPOLL transport

Modification:

Throw ClosedChannelException when a user tries to call shutdown*() on a closed channel.

Result:

Consistent behavior.
2016-09-01 08:16:02 +02:00
Norman Maurer
1208b90f57 [maven-release-plugin] prepare release netty-4.1.5.Final 2016-08-26 04:59:35 +02:00
Norman Maurer
d3cb95ef00 Make NIO and EPOLL transport connect errors more consistent with the JDK
Motivation:

The NIO transport used an IllegalStateException if a user tried to issue another connect(...) while the connect was still in process. For this case the JDK specified a ConnectPendingException which we should use. The same issues exists in the EPOLL transport. Beside this the EPOLL transport also does not throw the right exceptions for ENETUNREACH and EISCONN errno codes.

Modifications:

- Replace IllegalStateException with ConnectPendingException in NIO and EPOLL transport
- throw correct exceptions for ENETUNREACH and EISCONN in EPOLL transport
- Add test case

Result:

More correct error handling for connect attempts when using NIO and EPOLL transport
2016-08-27 20:57:36 +02:00
Norman Maurer
5e148d5670 [#5639] Ensure fireChannelActive() is also called if Channel is closed in connect promise.
Motivation:

We need to ensure we also call fireChannelActive() if the Channel is directly closed in a ChannelFutureListener that is belongs to the promise for the connect. Otherwise we will see missing active events.

Modifications:

Ensure we always call fireChannelActive() if the Channel was active.

Result:

No missing events.
2016-08-24 08:47:49 +02:00
Norman Maurer
2c1f17faa2 Throw correct NotYetConnectedException when ENOTCONN errno is set
Motivation:

We should throw a NotYetConnectedException when ENOTCONN errno is set. This is also consistent with NIO.

Modification:

Throw correct exception and add test case

Result:

More correct and consistent behavior.
2016-08-24 07:41:24 +02:00
Norman Maurer
cb7cf4491c [maven-release-plugin] prepare for next development iteration 2016-07-27 13:29:56 +02:00
Norman Maurer
9466b32d05 [maven-release-plugin] prepare release netty-4.1.4.Final 2016-07-27 13:16:59 +02:00
Norman Maurer
047f6aed28 [maven-release-plugin] prepare for next development iteration 2016-07-15 09:09:13 +02:00
Norman Maurer
b2adea87a0 [maven-release-plugin] prepare release netty-4.1.3.Final 2016-07-15 09:08:53 +02:00
Norman Maurer
4676a2271c [maven-release-plugin] prepare for next development iteration 2016-07-01 10:33:32 +02:00
Norman Maurer
ad270c02b9 [maven-release-plugin] prepare release netty-4.1.2.Final 2016-07-01 09:07:40 +02:00
Norman Maurer
4dec7f11b7 [maven-release-plugin] prepare for next development iteration 2016-06-07 18:52:34 +02:00
Norman Maurer
cf670fab75 [maven-release-plugin] prepare release netty-4.1.1.Final 2016-06-07 18:52:22 +02:00
Scott Mitchell
e200e4811b SocketRstTest fails due to exception message check
Motivation:
For lack of a better way the SocketRstTest inspects the content of the exception message to check if a RST occurred. However on windows the exception message is different than on other Unix based platforms and the assertion statement fails.

Modifications:
- Hack another string check in the unit test

Result:
SocketRstTest passes on windows
Fixes https://github.com/netty/netty/issues/5335
2016-06-02 08:15:43 +02:00
Norman Maurer
6ca49d1336 [maven-release-plugin] prepare for next development iteration 2016-05-25 19:16:44 +02:00
Norman Maurer
446b38db52 [maven-release-plugin] prepare release netty-4.1.0.Final 2016-05-25 19:14:15 +02:00
Norman Maurer
7b25402e80 Add CompositeByteBuf.addComponent(boolean ...) method to simplify usage
Motivation:

At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.

Modifications:

Add new methods that autoamtically increase the writerIndex when buffers are added.

Result:

Easier usage of CompositeByteBuf.
2016-05-21 19:52:16 +02:00
Trustin Lee
3a9f472161 Make retained derived buffers recyclable
Related: #4333 #4421 #5128

Motivation:

slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.

Modifications:

- Add the following methods which creates a non-recyclable derived buffer
  - retainedSlice()
  - retainedDuplicate()
  - readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
  own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
  - a user can replace the content of the holder in a consistent way
  - copy/duplicate/retainedDuplicate() can delegate the holder
    construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
  - Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
  - Make ReplayingDecoderByteBuf.reject() return an exception instead of
    throwing it so that its callers don't need to add dummy return
    statement

Result:

Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
2016-05-17 11:16:13 +02:00
Norman Maurer
572bdfb494 [maven-release-plugin] prepare for next development iteration 2016-04-10 08:37:18 +02:00
Norman Maurer
c6121a6f49 [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-10 08:36:56 +02:00
Norman Maurer
6e919f70f8 [maven-release-plugin] rollback the release of netty-4.1.0.CR7 2016-04-09 22:13:44 +02:00
Norman Maurer
4cdd51509a [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-09 22:05:34 +02:00
Norman Maurer
eb14e5b2f5 Ensure EpollSocketChannel.localAddress() returns correct address after connect(...) call.
Motivation:

We missed to correctly retrieve the localAddress() after we called Socket.connect(..) and so the user would always see an incorrect address when calling EpollSocketChannel.localAddress().

Modifications:

- Ensure we always retrieve the localAddress() after we called Socket.connect(...) as only after this we will be able to receive the correct address.
- Add unit test

Result:

Correct and consistent behaviour across different transports (NIO/OIO/EPOLL).
2016-04-09 19:04:45 +02:00
Scott Mitchell
5b48fc284e Make OIO/NIO/EPOLL autoReadClear consistent
Motivation:
OIO/NIO use a volatile variable to track if a read is pending. EPOLL does not use a volatile an executes a Runnable on the event loop thread to set readPending to false. These mechansims should be consistent, and not using a volatile variable is preferable because the variable is written to frequently in the event loop thread.
OIO also does not set readPending to false before each fireChannelRead operation and may result in reading more data than the user desires.

Modifications:
- OIO/NIO should not use a volatile variable for readPending
- OIO should set readPending to false before each fireChannelRead

Result:
OIO/NIO/EPOLL are more consistent w.r.t. readPending and volatile variable operations are reduced
Fixes https://github.com/netty/netty/issues/5069
2016-04-06 12:32:14 -07:00
Trustin Lee
3b941c2a7c [maven-release-plugin] prepare for next development iteration 2016-04-02 01:25:05 -04:00
Trustin Lee
7368ccc539 [maven-release-plugin] prepare release netty-4.1.0.CR6 2016-04-02 01:24:55 -04:00
Norman Maurer
cee38ed2b6 [maven-release-plugin] prepare for next development iteration 2016-03-29 16:45:13 +02:00
Norman Maurer
9cd9e7daeb [maven-release-plugin] prepare release netty-4.1.0.CR5 2016-03-29 16:44:33 +02:00
Norman Maurer
28d03adbfe [maven-release-plugin] prepare for next development iteration 2016-03-21 11:51:50 +01:00
Norman Maurer
4653dc1d05 [maven-release-plugin] prepare release netty-4.1.0.CR4 2016-03-21 11:51:12 +01:00
Scott Mitchell
8dbf5d02e5 EPOLL SO_LINGER=0 sends FIN+RST
Motivation:
If SO_LINGER is set to 0 the EPOLL transport will send a FIN followed by a RST. This is not consistent with the behavior of the NIO transport. This variation in behavior can cause protocol violations in streaming protocols (e.g. HTTP) where a FIN may be interpreted as a valid end to a data stream, but RST may be treated as the data is corrupted and should be discarded.

https://github.com/netty/netty/issues/4170 Claims the behavior of NIO always issues a shutdown when close occurs. I could not find any evidence of this in Netty's NIO transport nor in the JDK's SocketChannel.close() implementation.

Modifications:
- AbstractEpollChannel should be consistent with the NIO transport and not force a shutdown on every close
- FileDescriptor to keep state in a consistent manner with the JDK and not allow a shutdown after a close
- Unit tests for NIO and EPOLL to ensure consistent behavior

Result:
EPOLL is capable of sending just a RST to terminate a connection.
2016-03-16 22:35:04 -07:00
Tibor Csögör
6e840d8e62 trivial javadoc fixes
- fix the formatting of the diagram in ChannelFuture's javadoc
- update external link in AutobahnServer
- fix various spelling issues
2016-03-16 20:18:29 +01:00
Norman Maurer
ca443e42e0 [maven-release-plugin] prepare for next development iteration 2016-02-19 23:00:11 +01:00
Norman Maurer
f39eb9a6b2 [maven-release-plugin] prepare release netty-4.1.0.CR3 2016-02-19 22:59:52 +01:00
Norman Maurer
94f2748f1b Upgrade to netty-tcnative-1.1.33.Fork13
Motivation:

netty-tcnative-1.1.33.Fork was released, we should upgrade. Also we should skip renegotiate tests if boringssl is used because boringssl does not support renegotiation.

Modifications:

- Upgrade to netty-tcnative-1.1.33.Fork13
- Skip renegotiate tests if boringssl is used.

Result:

Use newest version of netty-tcnative and be able to build if boringssl is used.
2016-02-17 08:16:35 -08:00
Norman Maurer
75a2ddd61c [maven-release-plugin] prepare for next development iteration 2016-02-04 16:51:44 +01:00
Norman Maurer
7eb3a60dba [maven-release-plugin] prepare release netty-4.1.0.CR2 2016-02-04 16:37:06 +01:00
Norman Maurer
210ebe1354 Allow to specify tcnative artifactId and verion to allow run tests easily with different tcnative flavors
Motivation:

As we now can easily build static linked versions of tcnative it makes sense to run our netty build against all of them.
This helps to ensure our code works with libressl, openssl and boringssl.

Modifications:

Allow to specify -Dtcnative.artifactId= and -Dtcnative.version=

Result:

Easy to run netty build against different tcnative flavors.
2016-01-29 22:27:19 +01:00
Norman Maurer
1c417e5f82 [maven-release-plugin] prepare for next development iteration 2016-01-21 15:35:55 +01:00
Norman Maurer
c681a40a78 [maven-release-plugin] prepare release netty-4.1.0.CR1 2016-01-21 15:28:21 +01:00
Fabian Lange
619d82b56f Removed unused imports
Motivation:

Warnings in IDE, unclean code, negligible performance impact.

Modification:

Deletion of unused imports

Result:

No more warnings in IDE, cleaner code, negligible performance improvement.
2016-01-04 14:32:29 +01:00
Xiaoyan Lin
475d901131 Fix errors reported by javadoc
Motivation:

Javadoc reports errors about invalid docs.

Modifications:

Fix some errors reported by javadoc.

Result:

A lot of javadoc errors are fixed by this patch.
2015-12-27 08:36:45 +01:00
Norman Maurer
2ecce8fa56 [maven-release-plugin] prepare for next development iteration 2015-11-10 22:59:33 +01:00
Norman Maurer
6a93f331d3 [maven-release-plugin] prepare release netty-4.1.0.Beta8 2015-11-10 22:50:57 +01:00
Norman Maurer
2ff2806ada [maven-release-plugin] prepare for next development iteration 2015-10-02 09:03:29 +02:00
Norman Maurer
5a43de10f7 [maven-release-plugin] prepare release netty-4.1.0.Beta7 2015-10-02 09:02:58 +02:00
Norman Maurer
276613c63c Not use RC4 for renegation as it is not supported in more recent java versions.
Motivation:

RC4 is not supported by default in more recent java versions as RC4 is considered insecure. We should not use it in tests as these test will fail on more recent java version.

Modifications:

Use SSL_RSA_WITH_3DES_EDE_CBC_SHA for test.

Result:

Non failing test on more recent java versions.
2015-09-23 08:39:44 +02:00
nmittler
3ee44a3dbb Update Netty to latest netty-tcnative
Motivation:

The latest netty-tcnative fixes a bug in determining the version of the runtime openssl lib.  It also publishes an artificact with the classifier linux-<arch>-fedora for fedora-based systems.

Modifications:

Modified the build files to use the "-fedora" classifier when appropriate for tcnative. Care is taken, however, to not change the classifier for the native epoll transport.

Result:

Netty is updated the the new shiny netty-tcnative.
2015-09-18 12:07:21 -07:00
Norman Maurer
6e3acfeb06 Correctly throw SSLPeerUnverifiedException if peers identity has not been verified
Motivation:

As stated in the SSLSession javadocs getPeer* methods need to throw a SSLPeerUnverifiedException if peers identity has not be verified.

Modifications:

- Correctly throw SSLPeerUnverifiedException
- Add test for it.

Result:

Correctly behave like descripted in javadocs.
2015-09-15 09:57:45 +02:00
Michael Bildner
58dc7f7902 Do not bother closing SSL enging inbound if the outbound has already been closed.
Motivation:

Invoking the javax.net.ssl.SSLEngine.closeInbound() method will send a
fatal alert and invalidate the SSL session if a close_notify alert has
not been received.
From the javadoc:
If the application initiated the closing process by calling
closeOutbound(), under some circumstances it is not required that the
initiator wait for the peer's corresponding close message. (See section
7.2.1 of the TLS specification (RFC 2246) for more information on
waiting for closure alerts.) In such cases, this method need not be
called.
Always invoking the closeInbound() method without regard to whether or
not the closeOutbound() method has been invoked could lead to
invalidating perfectly valid SSL sessions.

Modifications:

Added an instance variable to track whether the
SSLEngine.closeOutbound() method has been invoked. When the instance
variable is true, the SSLEngine.closeInbound() method doesn't need to be
invoked.

Result:

SSL sessions will not be invalidated if the outbound side has been
closed but a close_notify alert hasn't been received.
2015-09-06 10:00:46 +02:00
Norman Maurer
34de2667c7 [maven-release-plugin] prepare for next development iteration 2015-09-02 11:45:20 +02:00
Norman Maurer
2eb444ec1d [maven-release-plugin] prepare release netty-4.1.0.Beta6 2015-09-02 11:36:11 +02:00
Scott Mitchell
b6a4f5de9d Refactor of HttpUtil and HttpHeaderUtil
Motivation:
There currently exists http.HttpUtil, http2.HttpUtil, and http.HttpHeaderUtil. Having 2 HttpUtil methods can be confusing and the utilty methods in the http package could be consolidated.

Modifications:
- Rename http2.HttpUtil to http2.HttpConversionUtil
- Move http.HttpHeaderUtil methods into http.HttpUtil

Result:
Consolidated utilities whose names don't overlap.
Fixes https://github.com/netty/netty/issues/4120
2015-08-27 08:49:58 -07:00
Norman Maurer
5ac84760c4 Allow to create SslContext from existing PrivateKey / X509Certificate
Motivation:

Sometimes the user already has a PrivateKey / X509Certificate which should be used to create a new SslContext. At the moment we only allow to construct it via Files.

Modifications:

- Add new methods to the SslContextBuilder to allow creating a SslContext from PrivateKey / X509Certificate
- Mark all public constructors of *SslContext as @Deprecated, the user should use SslContextBuilder
- Update tests to us SslContextBuilder.

Result:

Creating of SslContext is possible with PrivateKay/X509Certificate
2015-08-12 15:05:58 +02:00
Norman Maurer
c3ab557f85 [#3987] Remove RC4 from default ciphers.
Motivation:

Remove RC4 from default ciphers as it is not known as secure anymore.

Modifications:

Remove RC4

Result:

Not use an insecure cipher as default.
2015-07-22 13:29:43 +02:00