Motivation:
8c73dbe9bd did migrate the codec-http2 code to use junit5 but missed two classes.
Modifications:
Adjust the rest of codec-http2 tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
We should update to use junit5 in all modules.
Modifications:
Adjust codec-http2 tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
This special case implementation of Promise / Future requires the implementations responsible for completing the promise to have knowledge of this class to provide value. It also requires that the implementations are able to provide intermediate status while the work is being done. Even throughout the core of Netty it is not really supported most of the times and so just brings more complexity without real gain.
Let's remove it completely which is better then only support it sometimes.
Modifications:
Remove Progressive* API
Result:
Code cleanup.... Fixes https://github.com/netty/netty/issues/8519
Motivation:
Sometime in the past we introduced the concept of Void*Promise. As it turned out this was not a good idea at all as basically each handler in the pipeline need to be very careful to correctly handle this. We should better just remove this "optimization".
Modifications:
- Remove Void*Promise and all the related APIs
- Remove tests which were related to Void*Promise
Result:
Less error-prone API
Motivation:
We have currently two test-failures in master. Let's disable these and then open a PR with a fix once we know why. This way we can make progress in master
Modifications:
Disable the two failing tests
Result:
Master builds again
Motivation:
Incoming `Http2GoAwayFrame#lastStreamId()` tells what was the last
streamId that the remote peer takes for processing [1]. We fire a
userEvent for all streams above that value to let users know those are
safe to retry on another connection. There is no need to go through
`forEachActiveStream` if `lastStreamId == Integer.MAX_VALUE` because
none of the streams can have id greater that MAX_VALUE.
1. https://datatracker.ietf.org/doc/html/rfc7540#section-6.8
Modifications:
- Return fast from `onHttp2GoAwayFrame` in `Http2MultiplexCodec` and
`Http2MultiplexHandler` if `lastStreamId() == Integer.MAX_VALUE`;
Result:
No unnecessary iteration over active streams on GO_AWAY if
`lastStreamId() == Integer.MAX_VALUE`.
Motivation:
Netty lacks client side support for decompressing Brotli compressed response bodies.
Modification:
* Introduce optional dependency to brotli4j by @hyperxpro. It will be up to the user to provide the brotli4j libraries for the target platform in the classpath. brotli4j is currently available for Linux, OSX and Windows, all for x86 only.
* Introduce BrotliDecoder in codec module
* Plug it onto `HttpContentDecompressor` for HTTP/1 and `DelegatingDecompressorFrameListener` for HTTP/2
* Add test in `HttpContentDecoderTest`
* Add `BrotliDecoderTest` that doesn't extend `AbstractDecoderTest` that looks flaky
Result:
Netty now support decompressing Brotli compressed response bodies.
Motivation:
`Http2FrameCodecBuilder` defines static factory methods `forClient()`
and `forServer()` that should be used to create a new instance.
The default ctor is useful only when users need to override behavior
of the existing builder. Those users should define another way to create
an instance.
Modifications:
- Decrease visibility of `Http2FrameCodecBuilder` default ctor from
`public` to `protected`;
- Add javadoc to clarity responsibilities;
Result:
Users of `Http2FrameCodecBuilder` are not confused why
`new Http2FrameCodecBuilder().build()` works for the server-side, but
does not work for the client-side.
__Motivation__
`Http2FrameCodecBuilder` constructor calls `server()` internally which disallows using certain methods on the builder later. Additionally, the constructor is package private which limits extension of the `Builder` as well as usage outside the available `forClient()` and `forServer()` static methods.
__Modification__
- Introduce a `public` no-arg constructor to `Http2FrameCodecBuilder`.
__Result__
`Http2FrameCodecBuilder` can now be used to create the codec with `Http2Connection` or `Http2ConnectionDecoder` and `Http2ConnectionEncoder` which was earlier not possible due to implicit call to `server()` by the `Http2FrameCodecBuilder` constructor.
Motivation:
RFC 8411 defines a new HTTP/2 pseudo header called `:protocol`:
- https://datatracker.ietf.org/doc/rfc8441/
Netty currently raises an exception when validating an `Http2Headers`.
Modifications:
- Added `Http2Headers.PseudoHeaderNames.PROTOCOL` so that `:protocol`
pseudo header is not rejected.
Result:
- A user can implement WebSockets with HTTP/2.
Motivation:
NullChecks resulting in a NullPointerException or IllegalArgumentException, numeric ranges (>0, >=0) checks, not empty strings/arrays checks must never be anonymous but with the parameter or variable name which is checked. They must be specific and should not be done with an "OR-Logic" (if a == null || b == null) throw new NullPointerEx.
Modifications:
* import static relevant checks
* Replace manual checks with ObjectUtil methods
Result:
All checks needed are done with ObjectUtil, some exception texts are improved.
Fixes#11170
Motivation:
SimpleChannelPromiseAggregator implements the promise API and allows for
multiple operations to share a common promise. It currently propagates
the last exception to occur, but this may mask the original exception
which lead to the last exception and make debugging more difficult.
Modifications:
- SimpleChannelPromiseAggregator propagates the first exception instead
of the last exception.
Result:
Fixes https://github.com/netty/netty/issues/11161.
Motivation:
In the method processHeaderState(), we have checked the http2 payload length against max frame size. But later for
different types of frames, we checked this again.
Modifications:
Removed the duplicate check in verify*() methods. And removed verifyPayloadLength() method, since it will not be used anymore.
Result:
Remove duplicate check and make the code cleaner.
Motivation: We have already calculated the payload length. So no need to calculate again when allocating ByteBuf
Modification: Used payloadLength variable instead of calculating the payload length again
Result: Re-use the variable value and make the code cleaner
Motivation:
There is a bug in `StreamBufferingEncoder` such that when client receives GOWAY while there are pending streams due to MAX_CONCURRENT_STREAMS, we see the following error:
```
io.netty.handler.codec.http2.Http2Exception$StreamException: Maximum active streams violated for this endpoint.
at io.netty.handler.codec.http2.Http2Exception.streamError(Http2Exception.java:147)
at io.netty.handler.codec.http2.DefaultHttp2Connection$DefaultEndpoint.checkNewStreamAllowed(DefaultHttp2Connection.java:896)
at io.netty.handler.codec.http2.DefaultHttp2Connection$DefaultEndpoint.createStream(DefaultHttp2Connection.java:748)
at io.netty.handler.codec.http2.DefaultHttp2Connection$DefaultEndpoint.createStream(DefaultHttp2Connection.java:668)
at io.netty.handler.codec.http2.DefaultHttp2ConnectionEncoder.writeHeaders0(DefaultHttp2ConnectionEncoder.java:201)
at io.netty.handler.codec.http2.DefaultHttp2ConnectionEncoder.writeHeaders(DefaultHttp2ConnectionEncoder.java:167)
at io.netty.handler.codec.http2.DecoratingHttp2FrameWriter.writeHeaders(DecoratingHttp2FrameWriter.java:53)
at io.netty.handler.codec.http2.StreamBufferingEncoder.writeHeaders(StreamBufferingEncoder.java:153)
at io.netty.handler.codec.http2.StreamBufferingEncoder.writeHeaders(StreamBufferingEncoder.java:141)
at io.grpc.netty.NettyClientHandler.createStreamTraced(NettyClientHandler.java:584)
at io.grpc.netty.NettyClientHandler.createStream(NettyClientHandler.java:567)
at io.grpc.netty.NettyClientHandler.write(NettyClientHandler.java:328)
at io.netty.channel.AbstractChannelHandlerContext.invokeWrite0(AbstractChannelHandlerContext.java:717)
at io.netty.channel.AbstractChannelHandlerContext.invokeWrite(AbstractChannelHandlerContext.java:709)
at io.netty.channel.AbstractChannelHandlerContext.write(AbstractChannelHandlerContext.java:792)
at io.netty.channel.AbstractChannelHandlerContext.write(AbstractChannelHandlerContext.java:702)
at io.netty.channel.DefaultChannelPipeline.write(DefaultChannelPipeline.java:1015)
at io.netty.channel.AbstractChannel.write(AbstractChannel.java:289)
at io.grpc.netty.WriteQueue$AbstractQueuedCommand.run(WriteQueue.java:213)
at io.grpc.netty.WriteQueue.flush(WriteQueue.java:128)
at io.grpc.netty.WriteQueue.drainNow(WriteQueue.java:114)
at io.grpc.netty.NettyClientHandler.goingAway(NettyClientHandler.java:783)
at io.grpc.netty.NettyClientHandler.access$300(NettyClientHandler.java:91)
at io.grpc.netty.NettyClientHandler$3.onGoAwayReceived(NettyClientHandler.java:280)
at io.netty.handler.codec.http2.DefaultHttp2Connection.goAwayReceived(DefaultHttp2Connection.java:236)
at io.netty.handler.codec.http2.DefaultHttp2ConnectionDecoder.onGoAwayRead0(DefaultHttp2ConnectionDecoder.java:218)
at io.netty.handler.codec.http2.DefaultHttp2ConnectionDecoder$FrameReadListener.onGoAwayRead(DefaultHttp2ConnectionDecoder.java:551)
at io.netty.handler.codec.http2.Http2InboundFrameLogger$1.onGoAwayRead(Http2InboundFrameLogger.java:119)
at io.netty.handler.codec.http2.DefaultHttp2FrameReader.readGoAwayFrame(DefaultHttp2FrameReader.java:591)
at io.netty.handler.codec.http2.DefaultHttp2FrameReader.processPayloadState(DefaultHttp2FrameReader.java:272)
at io.netty.handler.codec.http2.DefaultHttp2FrameReader.readFrame(DefaultHttp2FrameReader.java:160)
at io.netty.handler.codec.http2.Http2InboundFrameLogger.readFrame(Http2InboundFrameLogger.java:41)
at io.netty.handler.codec.http2.DefaultHttp2ConnectionDecoder.decodeFrame(DefaultHttp2ConnectionDecoder.java:174)
at io.netty.handler.codec.http2.Http2ConnectionHandler$FrameDecoder.decode(Http2ConnectionHandler.java:378)
at io.netty.handler.codec.http2.Http2ConnectionHandler.decode(Http2ConnectionHandler.java:438)
at io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(ByteToMessageDecoder.java:498)
at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:437)
at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:276)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:379)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:365)
at io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(AbstractChannelHandlerContext.java:357)
at io.netty.handler.ssl.SslHandler.unwrap(SslHandler.java:1486)
at io.netty.handler.ssl.SslHandler.decodeJdkCompatible(SslHandler.java:1235)
at io.netty.handler.ssl.SslHandler.decode(SslHandler.java:1282)
at io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(ByteToMessageDecoder.java:498)
at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:437)
at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:276)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:379)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:365)
at io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(AbstractChannelHandlerContext.java:357)
at io.netty.channel.DefaultChannelPipeline$HeadContext.channelRead(DefaultChannelPipeline.java:1410)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:379)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:365)
at io.netty.channel.DefaultChannelPipeline.fireChannelRead(DefaultChannelPipeline.java:919)
at io.netty.channel.epoll.AbstractEpollStreamChannel$EpollStreamUnsafe.epollInReady(AbstractEpollStreamChannel.java:792)
at io.netty.channel.epoll.EpollEventLoop.processReady(EpollEventLoop.java:475)
at io.netty.channel.epoll.EpollEventLoop.run(EpollEventLoop.java:378)
at io.netty.util.concurrent.SingleThreadEventExecutor$4.run(SingleThreadEventExecutor.java:989)
at io.netty.util.internal.ThreadExecutorMap$2.run(ThreadExecutorMap.java:74)
at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30)
at java.base/java.lang.Thread.run(Unknown Source)
```
The bug should come from the way that `StreamBufferingEncoder.writeHeaders()` handles the condition `connection().goAwayReceived()`. The current behavior is to delegate to `super.writeHeaders()` and let the stream fail, but this will end up with `Http2Exception` with the message "Maximum active streams violated for this endpoint" which is horrible. See e5951d46fc/codec-http2/src/main/java/io/netty/handler/codec/http2/StreamBufferingEncoder.java (L152-L155)
Modification:
Abort new stream immediately if goaway received *and* MAX_CONCURRENT_STREAM reached in `StreamBufferingEncoder` rather than delegating to the `writeHeaders()` method of its super class.
Result:
In the situation when GOAWAY received as well as MAX_CONCURRENT_STREAM exceeded, the client will fail the buffered streams with `Http2Error.NO_ERROR` and message "GOAWAY received" instead of "Maximum active streams violated for this endpoint".
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
We also need to ensure that all the header validation is done when a single header with the endStream flag is received
Modifications:
- Adjust code to always enforce the validation
- Add more unit tests
Result:
Always correctly validate
Motivation:
CONNECT requests have no path defined as stated in the HTTP/2 spec, at the moment we will throw an exception if we try to convert such a request to HTTP/1.1
Modifications:
- Don't throw an exception if we try to convert a HTTP/2 CONNECT request that has no path
- Add unit test
Result:
Related to https://github.com/netty/netty-incubator-codec-http3/pull/112.
Motivation:
We need to ensure we are still be able to correctly map errors to streams in all cases. The problem was that we sometimes called closeStreamRemote(...) in a finally block and so closed the underyling stream before the actual exception was propagated. This was only true in some cases and not in all. Generally speaking we should only call closeStreamRemote(...) if there was no error as in a case of error we should generate a RST frame.
Modifications:
- Only call closeStreamRemote(...) if no exeption was thrown and so let the Http2ConnectionHandler handle the exception correctly
- Add unit tests
Result:
Correctly handle errors even when endStream is set to true
Motivation
A GOAWAY frame (or any other HTTP/2 frame) should not be sent before the
connection preface. Clients that immediately close the channel may
currently attempt to send a GOAWAY frame before the connection preface,
resulting in servers receiving a seemingly-corrupt connection preface.
Modifications
* Ensure that the preface has been sent before attempting to
automatically send a GOAWAY frame as part of channel shutdown logic
* Add unit test that only passes with new behavior
Result
Fixes https://github.com/netty/netty/issues/11026
Co-authored-by: Bennett Lynch <Bennett-Lynch@users.noreply.github.com>
Motivation:
There are several overloads of streamError(), with one receiving the
Throwable to be made the cause of the new exception. However, the wrong
overload was being called and instead the IllegalArgumentException was
being passed as a message format argument which was summarily thrown
away as the message format didn't reference it.
Modifications:
Move IllegalArgumentException to proper argument position.
Result:
A useful exception, with the underlying cause available.
Motivation:
As stated by https://tools.ietf.org/html/rfc7540#section-8.1.2.6 we should report a stream error if the content-length does not match the sum of all data frames.
Modifications:
- Verify that the sum of data frames match if a content-length header was send.
- Handle multiple content-length headers and also handle negative values
- Add io.netty.http2.validateContentLength system property which allows to disable the more strict validation
- Add unit tests
Result:
Correctly handle the case when the content-length header was included but not match what is send and also when content-length header is invalid
Motivation:
When TLSv1.3 is used (or TLS_FALSE_START) together with mTLS the handshake is considered successful before the server actually did verify the key material that was provided by the client. If the verification fails we currently will just close the stream without any extra information which makes it very hard to debug on the client side.
Modifications:
- Propagate SSLExceptions to the active streams
- Add unit test
Result:
Better visibility into why a stream was closed
Motivation:
https://github.com/netty/netty/pull/10765 added support for push promise and priority frames when using the Http2FrameCodec. Unfortunally it didnt correctly guard against the possibility to receive a priority frame for an non-existing stream, which resulted in a NPE
Modifications:
- Ignore priority frame for non existing stream
- Correctly implement equals / hashcode for DefaultHttp2PriorityFrame
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/10941
Motivation:
We should use GracefulShutdown when we try to create a stream and fail it because the stream space is exhausted as we may still want to process the active streams.
Modifications:
- Use graceful shutdown
- Add unit test
Result:
More graceful handling of stream creation failure due stream space exhaustation
Motivation:
Right now, we don't have to handle Push Promise Read in `Http2FrameCodec`. Push Promise is one of the key features of HTTP/2 and we should support it in our `Http2FrameCodec`.
Modification:
Added `Http2PushPromiseFrame` and `Http2PushPromiseFrame` to handle Push Promise and Promise Frame.
Result:
Fixes#10748
Motivation:
HPACK static table is organized in a way that fields with the same
name are sequential. Which means when doing sequential scan we can
short-circuit scan on name mismatch.
Modifications:
* `HpackStaticTable.getIndexIndensitive` returns -1 on name mismatch
rather than keep scanning.
* `HpackStaticTable` statically defined max position in the array
where name duplication is possible (after the given index there's
no need to check for other fields with the same name)
* Benchmark for different lookup patterns
Result:
Better HPACK static table lookup performance.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
Http2ConnectionHandler tries to addListener to the future without checking if it's void. If it is void, this will fail and generate an exception.
Modifications:
Unvoid the promise in writeData()
Result:
Fixes#10816, Writing with a voidPromise no longer generates exceptions.
Motivation:
`DelegatingDecompressorFrameListener#initDecompressor` has multiple dots `.` in comments. However, it should not have that.
Modification:
Removed multiple dots.
Result:
Clean comment
Motivation:
https in xmlns URIs does not work and will let the maven release plugin fail:
```
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.779 s
[INFO] Finished at: 2020-11-10T07:45:21Z
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare (default-cli) on project netty-parent: Execution default-cli of goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare failed: The namespace xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" could not be added as a namespace to "project": The namespace prefix "xsi" collides with an additional namespace declared by the element -> [Help 1]
[ERROR]
```
See also https://issues.apache.org/jira/browse/HBASE-24014.
Modifications:
Use http for xmlns
Result:
Be able to use maven release plugin
Motivation:
`HttpConversionUtil#toFullHttpResponse` and `HttpConversionUtil#toFullHttpRequest` has `ByteBufAllocator` which is used for building `FullHttpMessage` and then data can be appended with `FullHttpMessage#content`. However, there can be cases when we already have `ByteBuf` ready with data. So we need a parameter to add `ByteBuf` directly into `FullHttpMessage` while creating it.
Modification:
Added `ByteBuf` parameter,
Result:
More functionality for handling `FullHttpMessage` content.
Motivation:
We should have a method to add `HttpScheme` if `HttpRequest` does not contain `x-http2-scheme` then we should use add it if `HttpToHttp2ConnectionHandler` is build using specified `HttpScheme`.
Modification:
Added `HttpScheme` in `HttpToHttp2ConnectionHandlerBuilder`.
Result:
Automatically add `HttpScheme` if missing in `HttpRequest`.
Motivation:
When parsing HEADERS, connection errors can occur (e.g., too large of
headers, such that we don't want to HPACK decode them). These trigger a
GOAWAY with a last-stream-id telling the client which streams haven't
been processed.
Unfortunately that last-stream-id didn't include the stream for the
HEADERS that triggered the error. Since clients are free to silently
retry streams not included in last-stream-id, the client is free to
retransmit the request on a new connection, which will fail the
connection with the wrong last-stream-id, and the client is still free
to retransmit the request.
Modifications:
Have fatal connection errors (those that hard-cut the connection)
include all streams in last-stream-id, which guarantees the HEADERS'
stream is included and thus should not be silently retried by the HTTP/2
client.
This modification is heavy-handed, as it will cause racing streams to
also fail, but alternatives that provide precise last-stream-id tracking
are much more invasive. Hard-cutting the connection is already
heavy-handed and so is rare.
Result:
Fixes#10670
Motivation:
We received a [bug report](https://bugs.chromium.org/p/chromium/issues/detail?id=1143320) from the Chrome team at Google, their canary builds are failing [HTTP/2 GREASE](https://tools.ietf.org/html/draft-bishop-httpbis-grease-00) testing to netflix.com.
The reason it's failing is that Netty can't handle unknown frames without an active stream created. Let me know if you'd like more info, such as stack traces or repro steps.
Modification:
The change is minor and simply ignores unknown frames on the connection stream, similarly to `onWindowUpdateRead`.
Result:
I figured I would just submit a PR rather than filing an issue, but let me know if you want me to do that for tracking purposes.
Motivation:
There is no need for ByteProcessor to throw a checked exception.
The declared checked exception causes unnecessary code complications just to propagate it.
This can be cleaned up.
Modification:
ByteProcessor.process no longer declares to throw a checked exception, and all the places that were trying to cope with the checked exception have been simplified.
Result:
Simpler code.
Motivation:
There is no need for ByteProcessor to throw a checked exception.
The declared checked exception causes unnecessary code complications just to propagate it.
This can be cleaned up.
Modification:
ByteProcessor.process no longer declares to throw a checked exception, and all the places that were trying to cope with the checked exception have been simplified.
Result:
Simpler code.
Motivation:
`HttpConversionUtil#toHttpResponse` translates `Http2Headers` to `HttpResponse`. It uses `#addHttp2ToHttpHeaders(..., boolean isRequest)` to do so. However, `isRequest` field is set to `true` instead of `false`. It should be set to `false` because we're doing conversion of Response not Request.
Modification:
Changed `true` to `false`.
Result:
Correctly translates `Http2Headers` to `HttpResponse`.
Motivation:
We should have the `toString` method in `DefaultHttp2WindowUpdateFrame` because it makes debugging a little easy.
Modification:
Added `toString` method.
Result:
`toString` method to help in debugging.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
`Http2Frame` has extra empty line after `String name();`. However, it should not be there.
Modification:
Removed extra empty line.
Result:
Empty-line code style now matching with other classes.
Motivation:
`Http2FrameCodec#write(...)` has typo in comment.
`// In the event of manual SETTINGS ACK is is assumed the encoder will apply the earliest received but not`.
The typo is `is is`. However, it should be `it is`.
Modification:
Changed `is is` to `it is`.
Result:
Correct comment without typos.
Motivation:
`Http2DataFrame#isEndStream()` JavaDoc says `Returns {@code true} if the END_STREAM flag ist set.`. The typo is `ist` word. However, it should be `is`.
Modification:
Changed `ist` to `is`.
Result:
Better JavaDoc by fixing the typo.
Motivation:
`Http2HeadersFrame#isEndStream()` JavaDoc says `Returns {@code true} if the END_STREAM flag ist set.`. The typo is `ist` word. However, it should be `is`.
Modification:
Changed `ist` to `is`.
Result:
Better JavaDoc by fixing the typo.
Motivation:
`addHttp2ToHttpHeaders(int streamId, Http2Headers sourceHeaders, FullHttpMessage destinationMessage, boolean addToTrailer)`
should match
`addHttp2ToHttpHeaders(int streamId, Http2Headers inputHeaders, HttpHeaders outputHeaders, HttpVersion httpVersion, boolean isTrailer, boolean isRequest)`.
However, the `Http2Headers` variable name is different.
Modification:
Changed `sourceHeaders` to `inputHeaders`.
Result:
Variable and JavaDoc naming now correct.
Motivation:
Http2ToHttpHeaderTranslator is a private class but translateHeaders(Iterable<Entry<CharSequence, CharSequence>>) is public but it should be package-private.
Modification:
Removed public.
Result:
Correct access modifer.
Motivation:
Http2Headers has JavaDoc error which says Sets the {@link PseudoHeaderName#AUTHORITY} header or {@code null} if there is no such header however it should be Sets the {@link PseudoHeaderName#AUTHORITY} header in Http2Headers#authority(CharSequence) methods because it only sets CharSequence.
This is true for all setters in Http2Headers.
Modification:
Fixed all JavaDoc errors.
Result:
Better JavaDoc.
Motivation:
HTTP is a plaintext protocol which means that someone may be able
to eavesdrop the data. To prevent this, HTTPS should be used whenever
possible. However, maintaining using https:// in all URLs may be
difficult. The nohttp tool can help here. The tool scans all the files
in a repository and reports where http:// is used.
Modifications:
- Added nohttp (via checkstyle) into the build process.
- Suppressed findings for the websites
that don't support HTTPS or that are not reachable
Result:
- Prevent using HTTP in the future.
- Encourage users to use HTTPS when they follow the links they found in
the code.
Motivation:
junit deprecated Assert.assertThat(...)
Modifications:
Use MatcherAssert.assertThat(...) as replacement for deprecated method
Result:
Less deprecation warnings
