Motivation:
When a channel was registered before and is re-registered we need to respect ChannelConfig.isAutoRead() and so start reading one the registration task completes. This was done "by luck" before 15162202fb.
Modifications:
Explicit start reading once a Channel was re-registered if isAutoRead() is true.
Result:
Correctly receive data after re-registration completes.
Motivation:
Due a regression introduced by e969b6917c we missed to pass the original ChannelPromise to the next ChannelOutboundHandler and so
may never notify the origin ChannelPromise. This is related to #4805.
Modifications:
- Correctly pass the ChannelPromise
- Add unit test.
Result:
Correctly pass the ChannelPromise on deregister(...)
Motivation:
fix the issue netty#2944
Modifications:
(1) use - instead of =>, use ! instead of :> due to the connection is bidirectional. What's more, toString() method don't know the direction or there is no need to know the direction when only log channel information.
(2) add L： before local address and R: before remote address.
Result:
after the fix, toString() won't confuse the user.
Motivation:
If a user adds a ChannelHandler from outside the EventLoop it is possible to get into the situation that handlerAdded(...) is scheduled on the EventLoop and so called after another methods of the ChannelHandler as the EventLoop may already be executing on this point in time.
Modification:
- Ensure we always check if the handlerAdded(...) method was called already and if not add the currently needed call to the EventLoop so it will be picked up after handlerAdded(...) was called. This works as if the handler is added to the ChannelPipeline from outside the EventLoop the actual handlerAdded(...) operation is scheduled on the EventLoop.
- Some cleanup in the DefaultChannelPipeline
Result:
Correctly order of method executions of ChannelHandler.
Motivation:
ChannelOutboundHandlerAdapter's javadoc has some minor issues.
Modifications:
Fix the minor javadoc issues and resolves#4752.
Result:
ChannelOutboundHandlerAdapter's javadoc issues are fixed.
Motivation:
ChannelInboundHandler and ChannelOutboundHandler both can implement exceptionCaught(...) method and so we need to dispatch to both of them.
Modifications:
- Correctly first dispatch exceptionCaught to the ChannelInboundHandler but also make sure the next handler it will be dispatched to will be the ChannelOutboundHandler
- Add removeInboundHandler() and removeOutboundHandler() which allows to remove one of the combined handlers
Result:
Correctly handle events
Motivation:
Our contract in Channels is that the promise should always be notified before the actual callbacks of the ChannelInboundHandler are called. This was not done in the LocalChannel and so the behavior was different to other Channel implementations.
Modifications:
- First complete the ChannelPromise then call fireChannelActive()
- Guard against NPE when doClose() was called before the task was executed.
Result:
Consistent behavior between LocalChannel and other Channel implementations.
Motivation:
In AbstractChannelTest we not correctly mocked some methods which could lead to test errors. That said it only showed up here when running from the IDE and not from the cmdLine.
Modifications:
Mock methods that are needed for the test
Result:
Test pass in the IDE as well.
Motivation:
At the moment EmbeddedChannel always handle close() and disconnect() the same way which also means that ChannelOutboundHandler.disconnect(...) will never called. We should allow to specify if these are handle different or not to make the use of EmbeddedChannel more flexible.
Modifications:
Add 2 other constructors which allow to specify if disconnect / close are handled the same way or differently.
Result:
More flexible usage of EmbeddedChannel possible.
Motivation:
The prefix fix of #2363 did not correctly handle the case when selectAgain is true and so missed to null out entries.
Modifications:
Move the i++ from end of loop to beginning of loop
Result:
Entries in the array will be null out so allow to have these GC'ed once the Channel close
Motivation:
We often used synchronized(this) while the whole method was synchronized, which can be simplified by just mark the whole method as synchronized.
Modifications:
Replace synchronized(this) with synchronized on the method
Result:
Cleaner code
Motivation:
As a user may call deregister() from within any method while doing processing in the ChannelPipeline, we need to ensure we do the actual deregister operation later. This is needed as for example, we may be in the ByteToMessageDecoder.callDecode(...) method and so still try to do processing in the old EventLoop while the user already registered the Channel to a new EventLoop. Without delay, the deregister operation this could lead to have a handler invoked by different EventLoop and so threads.
Modifications:
Ensure the actual deregister will be done later on and not directly when invoked.
Result:
Calling deregister() within ByteToMessageDecoder.decode(..) is safe.
Motivation:
Estimation algorithm currently used for WriteTasks is complicated and
wrong. Additionally, some code relies on outbound buffer size
incremented only on actual writes to the outbound buffer.
Modifications:
- Throw away the old estimator and replace with a simple algorithm that
uses the client-provided estimator along with a statically configured
WriteTask overhead (io.netty.transport.writeTaskSizeOverhead system
property with the default value of 48 bytes)
- Add a io.netty.transport.estimateSizeOnSubmit boolean system property
allowing the clients to disable the message estimation outside the
event loop
Result:
Task estimation is user controllable and produces better results by
default
Motivation:
We need to remove all registered events for a Channel from the EventLoop before doing the actual close to ensure we not produce a cpu spin when the actual close operation is delayed or executed outside of the EventLoop.
Modifications:
Deregister for events for NIO and EPOLL socket implementations when SO_LINGER is used.
Result:
No more cpu spin.
Motivation:
Fix a race-condition when closing NioSocketChannel or EpollSocketChannel while try to detect if a close executor should be used and the underlying socket was already closed. This could lead to an exception that then leave the channel / in an invalid state and so could lead to side-effects like heavy CPU usage.
Modifications:
Catch possible socket exception while try to get the SO_LINGER options from the underlying socket.
Result:
No more race-condition when closing the channel is possible with bad side-effects.
Motivation:
The javadocs for ChannelOption.AUTO_CLOSE say the default is false, but the default is currently true.
Modifications:
- Make javadocs consistent with code
Result:
Less confusing docs.
Motivation:
exceptionCaught(...) will only handle inbound exceptions which means it makes not much sense to have it also on ChannelOutboundHandler. Because of this we should move it to ChannelInboundHandler.
Modifications:
Add @deprecated annotation to ChannelHandler.exceptionCaught(...).
Result:
Preapre to cleanup the API in later release.
Motivation:
We should use OneTimeTask where possible to reduce object creation.
Modifications:
Replace Runnable with OneTimeTask
Result:
Less object creation
Motivation:
If you need to handle a lot of concurrent connections (1M+) the memory footprint can be problem.
Modifications:
- Lazy create the IdentityHashMap that holds the EventExecutor mappings as this is not needed by most users anyway
- Use a sane initial capacity when creating the IdentityHashMap
Result:
Smaller memory footprint of DefaultChannelPipeline
Motivation:
We not need to store another reference to AbstractChannel as we can access it through DefaultChannelHandlerContext.
Modifications:
Remove reference.
Result:
Cleaner code.
Motivation:
If you start to have 1M+ concurrent connections memory footprint can be come a big issue. We should try to reduce it as much as possible in the core of netty.
Modifications:
- Remove HashMap that was used to store name to ctx mapping. This was only used for validation and access a handler by name. As a pipeline is not expected to be very long (like 100+ handlers) we can just walk the linked list structure to find the ctx with a given name.
Result:
Less memory footprint of the DefaultChannelPipeline.
Motivation:
The previous DefaultChannelPipeline#destroy() implementation, introduced in #3156, is suboptimal as it can cause the for loop to continuously spin if the executor used by a given handler is unable to "recognize" the event loop.
It could be objected that it's the custom executor responsibility to properly implement the inEventLoop() method, but some implementetaions might not be able to do that for performance reasons, and even so, it's always better to be safe against API misuse, in particular when it is not possible to fail fast and the alternative is rather some sutle behaviour.
Modifications:
The patch simply avoids the recursive spin by explicitly passing the "in event loop" condition as a boolean parameter, preserving the same guarantees offered by #3156. A unit test has also been added.
Result:
All channel events are correctly called and no high CPU usage is seen anymore.
Motivation:
Changing the chache of generated names to use a cache per thread. This will remove the bottleneck when many eventloops are used and names need to generate.
Modifications:
Use a FastThreadLocal to store the cached names.
Result:
Less locking between threads.
Motiviation:
If a user writes from outside the EventLoop we increase the pending bytes of the outbound buffer before submitting the write request. This is done so the user can stop writing asap once the channel turns unwritable. Unfortunally this doesn't take the overhead of adding the task into the account and so it is very easy for an user to full up the task queue. Beside this we use a value of 0 for an unown message by default which is not ideal.
Modifications:
- port the message calculation we used in netty 3.x into AbstractChannelHandlerContext and so better calculate the overhead of a message that is submitted from outside the EventLoop
- change the default estimated size for an unknown message to 8.
Result:
Better behaviour when submiting writes from outside the EventLoop.
Motivation:
Once a FixedChannelPool was closed we must not allow to acquire or release Channels to prevent assert errors.
Modifications:
Fail release and acquire calls when FixedChannelPool is closed.
Result:
No more assert errors.1
Motivation:
PendingWriteQueueTest needs some cleanup.
Modifications:
- Cleanup code to remove deprecation warnings
- use static imports
Result:
No more warnings
Motivation:
We missed to run all pending tasks when EmbeddedChannel.close(...) or disconnect(...) was called. Because of this channelInactive(...) / channelUnregistered(...) of the handlers were never called.
Modifications:
Correctly run all pending tasks and cancel all not ready scheduled tasks when close or disconnect was called.
Result:
Correctly run tasks on close / disconnect and have channelInactive(...) / channelUnregistered(...) called.
Motiviation:
We need to ensure the actual close to the transport takes place before the promsie of the write is notified that triggered it. This is needed as otherwise Channel.isActive(), isOpen() and isWritable() may return true even if the Channel should be closed already.
Modifications:
- Ensure the close takes place first
Result:
ChannelFutureListener will see the correct state of the Channel.
Motivation:
writeBytes(...) missed to set EPOLLOUT flag when not all bytes were written. This could lead to have the EpollEventLoop not try to flush the remaining bytes once the socket becomes writable again.
Modifications:
- Move setting EPOLLOUT flag logic to one point so we are sure we always do it.
- Move OP_WRITE flag logic to one point as well.
Result:
Correctly try to write pending data if socket becomes writable again.
Motivation:
If LocalChannel doWrite executes while the peer's state changes from CONNECTED to CLOSED it is possible that some promise's won't be completed and buffers will be leaked.
Modifications:
- Check the peer's state in doWrite to avoid a race condition
Result:
All write operations should release, and the associated promise should be completed.
Motivation:
https://github.com/netty/netty/pull/4143 addressed a few ordering issues but an ordering issue still remained if the Promise for a write completes, and a listener of that promise does a write on a peer channel. The ordering was subject to how potentially 2 different executors would run a task, but it should be coordinated such that the first write is read first.
Modifications:
- Keep track of the finishPeerRead task run on the executor if necessary and ensure it completes before current channel read occurs
Result:
Ordering of events for echo type situations is preserved.
Motivation:
When a LocalChannel write operation occurs, the promise associated with the write operation is marked successful when it is added to the peer's queue, but before the peer has actually received the data. If the promise callback closes the channel then a race condition exists where the close event may occur before the data is delivered. We should preserve ordering of events.
Modifications:
- LocalChannel should track when a write is in progress, and if a close operation happens make sure the peer gets all pending read operations.
Result:
LocalChannel preserves order of operations.
Fixes https://github.com/netty/netty/issues/4118
Motivation:
Doc of ChannelGroup says, that it can be used to manage server and child channels at once.
However, in DefaultChannelGroup, there is a race condition. When a server channel accepts a child, it schedules its
registration on an event loop, which takes some time. If the ChannelGroup, which is supposed
to close server and child channels at once, is closed after the child channel has been scheduled
for registration and before this registration actually happens, this child channel is not closed
and remains connected. This could lead to connection leaks.
Modifications:
To fix this, the DefaultChannelGroup is changed to has a closed flag.
This flag is set to true, just before the close() method is actually closing channels.
The add() method checks after adding a new channel, if this flag has been set to true.
If yes, the new channel is closed. If not, we have the guarantee, that this channel will be
closed by the ChannelGroup, because setting the closed flag to true happens-before closing any channels.
This behaviour can be activated by two new constructors. The old constructors are still there and behave like before.
Therefore, no existing code should be affected directly.
Result:
If activating this feature, the DefaultChannelGroup can be used, for managing server and child channels at once.
But this activating this feature means also, that a ChannelGroup cannot be reused after calling close().
Motivation:
When releasing unhealthy channel back to a pool we don't have to offer it since on acquire it will be discarded anyways.
Also checking healthiness at release is a good idea so we don't end up having tons of unhealthy channels in the pool(unless they became unhealthy after being offered)
Modifications:
private SimpleChannelPool.offerIfHealthy() method added that is called from SimpleChannelPool.doReleaseChannel(). SimpleChannelPool.offerIfHealthy() offers channel back to pool only if channel is healthy.
Otherwise it throws setFailure exception to the promise.
Result:
The pool is now much cleaner and not spammed with unhealthy channels.
Added ability to choose if channel health has to be validated on release by passing boolean flag.
Motivation:
Depending on performance preferences and individual use cases sometimes we would like to be able force health check of a channel at release time and do not offer it back to the pool. Other times we would want to just release channel and offer it back to the pool and check health only when we try to acquire that channel from the pool. See more details here: https://github.com/netty/netty/issues/4077#issuecomment-130461684
Modifications:
Future<Void> release(Channel channel, Promise<Void> promise, boolean offerHealthyOnly);
The offerHealthyOnly boolean flag allows developers to choose whether to do channel validation before offering it back to pool or not.
Appropriate modifications made to hierarchy of implementations of ChannelPool. offerHealthyOnly=true will force channel health to be checked before offering back to pool. offerHealthyOnly=false will ignore channel health check and will just try just offer it back to the pool
offerHealthyOnly=true by default.
Result:
Channel health check before offer back to pool is controlled by a flag now.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:279 line split to be less then 120 characters.
SimpleChannelPool.java:280:31 space added after '{'
SimpleChannelPool.java:282:17 space added after '{'
SimpleChannelPoolTest.java:198 - extra white space line removed.
Result:
Code satisfies checkstyle requirements.
offerHealthyOnly is passed as a constructor parameter now.
Motivation:
Instead of passing offerHealthyOnly as a method parameter it is better to pass it in as SimpleChannelPool or FixedChannelPool constructor.
Modifications:
Redundant release method that takes offerHealthyOnly removed from ChannelPool.
offerHealthyOnly parameter added to constructor for FixedChannelPool and SimpleChannelPool.
Result:
SimpleChannelPool and FixedChannelPool are now take offerHealthyOnly as a constructor parameter. Default behavior is: offerHealthyOnly=true.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:84: line made to be no longer then 120 characters.
SimpleChannelPool.java:237: extra white space line removed.
Result:
Code satisfies checkstyle requirements.
Tests do not need to be too copled to the code. Exception message should not be validated
Motivation:
We don't need our tests to be too coupled to the code. Exception type validation in tests is just good enough.
Modifications:
Exception validation message removed from SimpleChannelPoolTest.testUnhealthyChannelIsNotOffered() test.
Result:
The SimpleChannelPoolTest test is less coupled to the code now.
Stack trace set to empty for UNHEALTHY_NON_OFFERED_TO_POOL.
Motivation:
We don't need stack trace for UNHEALTHY_NON_OFFERED_TO_POOL.
Modifications:
Added UNHEALTHY_NON_OFFERED_TO_POOL.setStackTrace(EmptyArrays.EMPTY_STACK_TRACE) to static init block.
Result:
UNHEALTHY_NON_OFFERED_TO_POOL's stack trace set to empty.
Minor code re-factorings.
Motivation:
For better code readability we need to apply several minor code re-factorings.
Modifications:
javadocs true -> {@code true}
offerHealthyOnly variable name changed to releaseHeathCheck
<p/> -> <p> in javadocs
offerHealthyOnly removed from doReleaseChannel as it not needed there.
Result:
Code quality is improved.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:87: line made to be no longer then 120 characters.
Result:
Code satisfies checkstyle requirements.
Pull request needs to contain only necessary changes
Motivation:
The pull request should not contain unnecessary changes that are not needed as part of required functionality of pull request.
Modifications:
private void doReleaseChannel(final Channel channel, final Promise<Void> promise) - > private void doReleaseChannel(Channel channel, Promise<Void> promise)
Result:
Pull request contains less unnecessary modifications.
