Motivation:
Sometimes the SingleThreadEventLoopTest did fail on our CI. This was because of GC pressure produced by Thread.sleep(...) when interrupted as it creates a new InterruptedException all the time (and need to fill it).
Modifications:
Replace Thread.sleep(...) with LockSupport.parkNanos(...) to eliminate exception overhead.
Result:
SingleThreadEventLoopTest produce a lot less garbage.
Motivation:
A recent refactoring of the outbound flow controller interface
introduced a bug when writing data. We're no longer properly handling
the completion of the write (i.e. updating stream state/handling error).
Modifications:
Updated AbstractHttp2ConnectionHandler.writeData to properly handle the
completion of the write future.
Result:
DATA writes now perform post-write cleanup.
The 'bin/' directory is currently not in the .gitignore file.
Eclipse creates this directory to support IDE operations.
These directory is generated and not related to source code and therefore does not belong in git.
Modifications:
-Add 'bin/' to .gitignore
Result:
-No more 'bin/' directory confusion for eclipse users.
Motivation:
We currently have a mix of "Observer" and "Listener" for interface
names. We should make them all "Listener" to be consistent.
Modifications:
Renamed Http2DataObserver->Http2DataListener and
Http2FrameObserver->Http2FrameListener.
Result:
Listener interface names are consistent.
Motivation:
The priority information reported by the HTTP/2 to HTTP tranlsation layer is not correct in all situations.
The HTTP translation layer is not using the Http2Connection.Listener interface to track tree restructures.
This incorrect information is being sent up to clients and is misleading.
Modifications:
-Restructure InboundHttp2ToHttpAdapter to allow a default data/header mode
-Extend this interface to provide an optional priority translation layer
Result:
-Priority information being correctly reported in HTTP/2 to HTTP translation layer
-Cleaner code with seperation of concerns (optional priority conversion).
Motivation:
Currently, window maintenance is automatically performed when a flow
control window drops below half its initial size. We should provide a
way for advanced applications to determine whether or not this should be
done on a per-stream basis.
Modifications:
Modifying DefaultHttp2InboundFlowController to allow enabling/disabling
of window maintenance per stream.
Result:
Inbound flow control window maintenance will be dynamically
configurable.
Motivation:
In EpollSocketchannel.doWriteFileRegion(...) we need to make sure we write until sendFile(...) returns either 0 or all is written. Otherwise we may not get notified once the Channel is writable again.
This is the case as we use EPOLL_ET.
Modifications:
Always write until either sendFile returns 0 or all is written.
Result:
No more hangs when writing DefaultFileRegion can happen.
Motivation:
To make it more easy to shutdown an EventExecutorGroup / EventLoopGroup we should let both of them extend AutoCloseable.
Modifications:
Let EventExecutorGroup extend AutoCloseable and impement it.
Result:
Easier shutdown of EventExecutorGroup and EventLoopGroup
Motivation:
Our last-minute change that made AbstractChannelHandlerContext implement PausableChannelEventExecutor broke the socksproxy example.
Modifications:
AbstractChannelHandlerContext does not inherit from PausableChannelEventExecutor anymore. Instead we'll allocate an extra object on demand.
Result:
AbstractChannelHandlerContext.executor().newPromise() returns the correct type.
Related issue: #2821
Motivation:
There's no way for a user to change the default ZlibEncoder
implementation.
It is already possible to change the default ZlibDecoder implementation.
Modification:
Add a new system property 'io.netty.noJdkZlibEncoder'.
Result:
A user can disable JDK ZlibEncoder, just like he or she can disable JDK
ZlibDecoder.
Motivation:
HTTP/2 draft 14 came out a couple of weeks ago and we need to keep up
with the spec.
Modifications:
-Revert back to dispatching FullHttpMessage objects instead of individual HttpObjects
-Corrections to HttpObject comparitors to support test cases
-New test cases to support sending headers immediatley
-Bug fixes cleaned up to ensure the message flow is terminated properly
Result:
Netty HTTP/2 to HTTP/1.x translation layer will support the HTTP/2 draft message flow.
Motivation:
This is just some general cleanup to get rid of the FrameWriter inner
interface withing Http2InboundFlowController. It's not necessary since
the flow controller can just use the Http2FrameWriter to send
WINDOW_UPDATE frames.
Modifications:
Updated DefaultHttp2InboundFlowController to use Http2FrameWriter.
Result:
The inbound flow control code is somewhat less smelly :).
Motivation:
We have some duplicated code that can be reused.
Modifications:
Create package private class called CodecUtil that now contains the shared code / helper method.
Result:
Less code-duplication
Motivation:
ByteToMessageCodec miss to check for @Sharable annotation in one of its constructors.
Modifications:
Ensure we call checkForSharableAnnotation in all constructors.
Result:
After your change, what will change.
Motivation:
We're currently out-of-spec with HTTP/2 in that we don't include padding
in the flow control logic.
Modifications:
Modified both DefaultHttp2InboundFlowController and
DefaultHttp2OutboundFlowController to properly take padding into
account. Outbound is more complicated since padding has to be properly
accounted for when splitting frames.
Result:
HTTP/2 codec properly flow controls padding.
Motivation:
The current interface and implementation for HTTP/2 priority tree events does not notify listeners of all parent change events. As a result operations which depend upon knowing about parent change events may be missing events and result in stale data. This interface also allows new listeners to easily consume priority tree change events.
Modifications:
-Http2Connection.Listener interface will change to support notifications on every node after the priority has changed and tree events have settled
-This will affect the outbound flow controller, DefaultHttp2Connection, and other listeners using the old interface
Result:
A modified (hopefully simplified and correct) Listener interface to get priority tree change event notification
Motivation:
This is addressing a TODO in the outbound flow controller. We currently
have a separate writer interface passed into the outbound flow
controller. This is confusing and limiting as to how the flow controller
can perform its writes (e.g. no control over flushing). Instead it would
be better to just let the flow controller use the Http2FrameWriter
directly.
Modifications:
- Added a new Http2DataWriter interface, which is extended by
Http2FrameWriter and Http2OutboundFlowController.
- Removed automatic flushing from Http2DataWriter in order to facilitate
optimizing the case where there are multiple writes.
- Updated DefaultHttp2OutboundFlowController to properly optimize
flushing of the ChannelHandlerContext when multiple writes occur.
Result:
Code is greatly simplified WRT outbound flow control and flushes are
optimized for flow-controlled DATA frames.
Motivation:
Currently we do more memory copies then needed.
Modification:
- Directly use heap buffers to reduce memory copy
- Correctly release buffers to fix buffer leak
Result:
Less memory copies and no leaks
Motivation:
There were no way to efficient write a CompositeByteBuf as we always did a memory copy to a direct buffer in this case. This is not needed as we can just write a CompositeByteBuf as long as all the components are buffers with a memory address.
Modifications:
- Write CompositeByteBuf which contains only direct buffers without memory copy
- Also handle CompositeByteBuf that have more components then 1024.
Result:
More efficient writing of CompositeByteBuf.
Motivation:
There is not need todo redunant reads of head in peakNode as we can just spin on next() until it becomes visible.
Modifications:
Remove redundant reads of head in peakNode. This is based on @nitsanw's patch for akka.
See https://github.com/akka/akka/pull/15596
Result:
Less volatile access.
Motivation:
The recent changes f8bee2e94c to use a FJP introduced a regression on Android that cause a NPE.
Modifications:
- Use AtomicReferenceFieldUpdater so it works also on Android
- Fix inspection warnings
Result:
Netty works again on Android too.
Motivation:
We used the wrong EventExecutor to notify for bind failures if a late registration was done.
Modifications:
Use the correct EventExecutor to notify and only use the GlobelEventExecutor if the registration fails itself.
Result:
The correct Thread will do the notification.
Motivation:
The unit tests in codec-socks contained redundant casts and empty test classes.
Modifications:
- Remove redundant casts
- Delete empty test classes
Result:
Cleanup
The HTTP/2 codec is missing from the netty-all maven dependency.
This means third party libraries have to pull in additional dependencies
above netty-all to use this codec.
Modifications:
Add HTTP/2 codec to netty-all
Result:
Third party libraries don't need to pull in additional dependencies
to use HTTP/2 codec.
Motivation:
HTTP/2 draft 14 came out a couple of weeks ago and we need to keep up
with the spec.
Modifications:
- Removed use of segment throughout.
- Added new setting for MAX_FRAME_SIZE. Used by the frame reader/writer
rather than a constant.
- Added new setting for MAX_HEADER_LIST_SIZE. This is currently unused.
- Expanded the header size to 9 bytes. The frame length field is now 3
bytes and added logic for checking that it falls within the valid range.
Result:
Netty will support HTTP/2 draft 14 framing. There will still be some
work to do to be compliant with the HTTP adaptation layer.
Motivation:
The example mis handle two elements:
1) Last message is a LastHttpContent and is not taken into account by
the server handler
2) The client makes a sync on last write (chunked) but there is no flush
before, therefore the sync is waiting forever.
Modifications:
1) Take into account the message LastHttpContent in simple Get.
2) Removes sync but add flush for each post and multipost parts
Results:
Example is no more blocked after get test.
Should be done also in 4.0 and Master (similar changes)
Motivation:
Recently we changed the default value of SOMAXCONN that is used when we can not determine it by reading /proc/sys/net/core/somaxconn. While doing this we missed to update the javadocs to reflect the new default value that is used.
Modifications:
List correct default value in the javadocs of SOMAXCONN.
Result:
Correct javadocs.
Motivation:
In GitHub issue #2767 a bug was reported that the IPv4
default route leads to the ipfilter package denying
instead of accepting all addresses.
While the issue was reported for Netty 3.9, this bug
also applies to Netty 4 and higher.
Modifications:
When computing the subnet address from the CIDR prefix,
correctly handle the case where the prefix is set to zero.
Result:
Ipfilter accepts all addresses when passed the
IPv4 default route.
Motivation:
The test procedure is unstable when testing quick time (factor less or equal to 1). Changing to default 10ms in this case will force time to be correct and time to be checked only when factor is >= 2.
Modifications:
When factor is <= 1, minimalWaitBetween is 10ms
Result:
Hoping this version is finally stable.
Motivation:
It seems that in certain conditions, the write back from the server is so quick that the handler has no time to compute traffic shaping. So 10ms of wait before acknowledging is added in server side.
Modifications:
Add 10ms waiting before server ackonwledge the client.
Result:
The timing is now suppsed to be stable.
Motivation:
Test seems not yet stable (20ms instead of 40ms), so this small fix provides a "lightest" check.
If this is not passing again in master, one could deactivate this test by commenting the assertTrue in line 431.
Modification:
Divide by 2 the to be compared elapse time.
Result:
Locally this test is now passing.
Motivation:
The test procedure is unstable due to not enough precise timestamping
during the check.
Modifications:
Reducing the test cases and cibling "stable" test ("timestamp-able")
bring more stability to the tests.
Result:
Tests for TrafficShapingHandler seem more stable (whatever using JVM 6,
7 or 8).
When a ChannelOutboundBuffer contains ByteBufs followed by a FileRegion,
removeBytes() will fail with a ClassCastException. It should break the
loop instead.
f31c630c8c was causing
SocketGatheringWriteTest to fail because it does not take the case where
an empty buffer exists in a gathering write.
When there is an empty buffer in a gathering write, the number of
buffers returned by ChannelOutboundBuffer.nioBuffer() and the actual
number of write attemps can differ.
To remove the write requests correctly, a byte transport must use
ChannelOutboundBuffer.removeBytes()
Motivation:
Because of an incorrect logic in teh EmbeddedChannel constructor it is not possible to use EmbeddedChannel with a ChannelInitializer as constructor argument. This is because it adds the internal LastInboundHandler to its ChannelPipeline before it register itself to the EventLoop.
Modifications:
First register self to EventLoop before add LastInboundHandler to the ChannelPipeline.
Result:
It's now possible to use EmbeddedChannel with ChannelInitializer.
Motivation:
Due a regression NioSocketChannel.doWrite(...) will throw a ClassCastException if you do something like:
channel.write(bytebuf);
channel.write(fileregion);
channel.flush();
Modifications:
Correctly handle writing of different message types by using the correct message count while loop over them.
Result:
No more ClassCastException
Related issue: #2741 and #2151
Motivation:
There is no way for ChunkedWriteHandler to know the progress of the
transfer of a ChannelInput. Therefore, ChannelProgressiveFutureListener
cannot get exact information about the progress of the transfer.
If you add a few methods that optionally provides the transfer progress
to ChannelInput, it becomes possible for ChunkedWriteHandler to notify
ChannelProgressiveFutureListeners.
If the input has no definite length, we can still use the progress so
far, and consider the length of the input as 'undefined'.
Modifications:
- Add ChunkedInput.progress() and ChunkedInput.length()
- Modify ChunkedWriteHandler to use progress() and length() to notify
the transfer progress
Result:
ChunkedWriteHandler now notifies ChannelProgressiveFutureListener.
- SocksV[45] -> Socks[45]
- Make encodeAsByteBuf package private with some hassle
- Split SocksMessageEncoder into Socks4MessageEncoder and
Socks5MessageEncoder, and remove the original
- Remove lazy singleton instantiation; we don't need it.
- Remove the deprecated methods
- Fix Javadoc errors
Motivation:
SOCKS 4 and 5 are very different protocols although they share the same
name. It is not possible to incorporate the two protocol versions into
a single package.
Modifications:
- Add a new package called 'socksx' to supercede 'socks' package.
- Add SOCKS 4/4a support to the 'socksx' package
Result:
codec-socks now supports all SOCKS versions
Related issue: #2407
Motivation:
The current fallback SOMAXCONN value is 3072. It is way too large
comparing to the default SOMAXCONN value of popular OSes.
Modifications:
Decrease the fallback SOMAXCONN value to 128 or 200 depending on the
current OS
Result:
Saner fallback value
Motivation:
LZ4 compression codec provides sending and receiving data encoded by very fast LZ4 algorithm.
Modifications:
- Added `lz4` library which implements LZ4 algorithm.
- Implemented Lz4FramedEncoder which extends MessageToByteEncoder and provides compression of outgoing messages.
- Added tests to verify the Lz4FramedEncoder and how it can compress data for the next uncompression using the original library.
- Implemented Lz4FramedDecoder which extends ByteToMessageDecoder and provides uncompression of incoming messages.
- Added tests to verify the Lz4FramedDecoder and how it can uncompress data after compression using the original library.
- Added integration tests for Lz4FramedEncoder/Decoder.
Result:
Full LZ4 compression codec which can compress/uncompress data using LZ4 algorithm.
Motivation:
The _0XFF_0X00 buffer is not duplicated and empty after the first usage preventing the connection close to happen on subsequent close frames.
Modifications:
Correctly duplicate the buffer.
Result:
Multiple CloseWebSocketFrames are handled correctly.
Motivation:
ByteToMessageDecoder and ReplayingDecoder have incorrect javadocs in some places.
Modifications:
Fix incorrect javadocs for both classes.
Result:
Correct javadocs for both classes
