Motivation:
Remove RC4 from default ciphers as it is not known as secure anymore.
Modifications:
Remove RC4
Result:
Not use an insecure cipher as default.
Motivation:
DatagramUnitcastTest sometimes fails with BindException for an unknown reason.
Modifications:
Retry up to 3 times with a new free port when bind() fails with BindException
Result:
More build stability
Motivation:
SocketSslEchoTest.testSslEcho() has a race condition where a renegotiation future can be done before:
assertThat(renegoFuture.isDone(), is(false));
Modifications:
Remove the offending assertion.
Result:
More build stability
Motivation:
Due a bug we not correctly handled connection refused errors and so failed the connect promise with the wrong exception.
Beside this we some times even triggered fireChannelActive() which is not correct.
Modifications:
- Add testcase
- correctly detect connect errors
Result:
Correct and consistent handling.
Motivation:
To prevent from DOS attacks it can be useful to disable remote initiated renegotiation.
Modifications:
Add new flag to OpenSslContext that can be used to disable it
Adding a testcase
Result:
Remote initiated renegotion requests can be disabled now.
Motivation:
Because we tried to grab the SSL renegotation future to early we could see test-failures.
Modifications:
Access the future at the correct time.
Result:
No more test-failures.
Motivation:
The SSL peer who did not initiate renegotiation sometimes does not get
the notification for renegotition due to an unknown reason.
Modification:
Until the exact cause is understood, relax the assertions of the flaky
tests.
Result:
Build stability
Motivation:
The current heap dump compression preset (9) requires way too much
memory (768 MiB at maximum for dictionary), resulting in OOME in many
cases.
Modifications:
- Use the default preset (6) which uses 8 MiB dictionary.
- Do not fail abruptly even when OOME has been raised.
Result:
More stable heap dump acquisition
Motivation:
Some SCTP applications require the SCTP unordered flag.
This flag was not exposed by Netty so applications were unable
to use it.
Modifications:
- Add unordered flag to SctpMessage.
- {Nio,Oio}SctpChannel pass unordered flag to MessageInfo on write.
- SctpOutboundByteStreamHandler may optionally request unordered
delivery for all outbound messages.
- Added test case to SctpEchoTest using unordered flag.
Result:
Fixes#3698. New constructors and methods added to SctpMessage and
SctpOutboundByteStreamHandler, but changes are backward compatible.
Motiviation:
Our tests for non-auto-read did actually not test this correctly as auto-read was never disabled on the Bootstrap and ServerBootstrap.
Modifications:
- Correctly disable auto-read on Bootstrap and ServerBootstrap
- Fix tests to call ChannelHandlerContext.read() once a Channel becomes active.
Result:
Correctly test that non-auto-read works.
Motivation:
To use WebSocketClientHandshaker / WebSocketServerHandshaker it's currently a requirement of having a HttpObjectAggregator in the ChannelPipeline. This is not a big deal when a user only wants to server WebSockets but is a limitation if the server serves WebSockets and normal HTTP traffic.
Modifications:
Allow to use WebSocketClientHandshaker and WebSocketServerHandshaker without HttpObjectAggregator in the ChannelPipeline.
Result:
More flexibility
Motivation:
Using Unix Domain Sockets can be very useful when communication should take place on the same host and has less overhead then using loopback. We should support this with the native epoll transport.
Modifications:
- Add support for Unix Domain Sockets.
- Adjust testsuite to be able to reuse tests.
Result:
Unix Domain Sockets are now support when using native epoll transport.
Motivation:
Several issues were shown by various ticket (#2900#2956).
Also use the improvement on writability user management from #3036.
And finally add a mixte handler, both for Global and Channels, with
the advantages of being uniquely created and using less memory and
less shaping.
Issue #2900
When a huge amount of data are written, the current behavior of the
TrafficShaping handler is to limit the delay to 15s, whatever the delay
the previous write has. This is wrong, and when a huge amount of writes
are done in a short time, the traffic is not correctly shapened.
Moreover, there is a high risk of OOM if one is not using in his/her own
handler for instance ChannelFuture.addListener() to handle the write
bufferisation in the TrafficShapingHandler.
This fix use the "user-defined writability flags" from #3036 to
allow the TrafficShapingHandlers to "user-defined" managed writability
directly, as for reading, thus using the default isWritable() and
channelWritabilityChanged().
This allows for instance HttpChunkedInput to be fully compatible.
The "bandwidth" compute on write is only on "acquired" write orders, not
on "real" write orders, which is wrong from statistic point of view.
Issue #2956
When using GlobalTrafficShaping, every write (and read) are
synchronized, thus leading to a drop of performance.
ChannelTrafficShaping is not touched by this issue since synchronized is
then correct (handler is per channel, so the synchronized).
Modifications:
The current write delay computation takes into account the previous
write delay and time to check is the 15s delay (maxTime) is really
exceeded or not (using last scheduled write time). The algorithm is
simplified and in the same time more accurate.
This proposal uses the #3036 improvement on user-defined writability
flags.
When the real write occurs, the statistics are update accordingly on a
new attribute (getRealWriteThroughput()).
To limit the synchronisations, all synchronized on
GlobalTrafficShapingHandler on submitWrite were removed. They are
replaced with a lock per channel (since synchronization is still needed
to prevent unordered write per channel), as in the sendAllValid method
for the very same reason.
Also all synchronized on TrafficCounter on read/writeTimeToWait() are
removed as they are unnecessary since already locked before by the
caller.
Still the creation and remove operations on lock per channel (PerChannel
object) are synchronized to prevent concurrency issue on this critical
part, but then limited.
Additionnal changes:
1) Use System.nanoTime() instead of System.currentTimeMillis() and
minimize calls
2) Remove / 10 ° 10 since no more sleep usage
3) Use nanoTime instead of currentTime such that time spend is computed,
not real time clock. Therefore the "now" relative time (nanoTime based)
is passed on all sub methods.
4) Take care of removal of the handler to force write all pending writes
and release read too
8) Review Javadoc to explicit:
- recommandations to take into account isWritable
- recommandations to provide reasonable message size according to
traffic shaping limit
- explicit "best effort" traffic shaping behavior when changing
configuration dynamically
Add a MixteGlobalChannelTrafficShapingHandler which allows to use only one
handler for mixing Global and Channel TSH. I enables to save more memory and
tries to optimize the traffic among various channels.
Result:
The traffic shaping is more stable, even with a huge number of writes in
short time by taking into consideration last scheduled write time.
The current implementation of TrafficShapingHandler using user-defined
writability flags and default isWritable() and
fireChannelWritabilityChanged works as expected.
The statistics are more valuable (asked write vs real write).
The Global TrafficShapingHandler should now have less "global"
synchronization, hoping to the minimum, but still per Channel as needed.
The GlobalChannel TrafficShapingHandler allows to have only one handler for all channels while still offering per channel in addition to global traffic shaping.
And finally maintain backward compatibility.
Motivation:
We only support openssl for server side at the moment but it would be also useful for client side.
Modification:
* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC
Result:
openssl can be used for client and servers now.
Motivation:
TrafficShapingHandlerTest uses Logback API directly, which is
discouraged. Also, it overrides the global default log level, which
silences the DEBUG messages from other tests.
Modifications:
Remove the direct use of Logback API
Result:
The tests executed after TrafficShapingHandlerTest logs their DEBUG
messages correctly.
Motivation:
We need more information to understand why SocketSslEchoTest fails
sporadically in the CI machine.
Modifications:
- Refactor SocketSslEchoTest so that it is easier to retrieve the
information about renegotiation and the current progress
Result:
We will get more information when the test fails.
Motivation:
Tests sometimes time out because it took too long to compress the
generated heap dump.
Modifications:
- Move the compression logic to a new method 'compressHeapDumps()'
- Call TestUtils.compressHeapDumps() at the end of the tests, so that
the tests do not fail because of timeout
Result:
JUnit reports the real cause of the test failure instead of timeout
exception.
Motivation:
So far, we generated and deployed test JARs to Maven repositories. The
deployed JAR had the classifier 'test-jar'. The test JAR is consumed by
transport-native-epoll as a test dependency.
The problem is, when netty-transport-native-epoll pulls the test JAR as
a dependency, that Maven resolves its transitive dependencies at
'compile' and 'runtime' scope only, which is incorrect.
I was bitten by this problem recently while trying to add a new
dependency to netty-testsuite. Because I added a new dependency at the
'test' scope, the new dependency was not pulled transitively by
transport-native-epoll and caused an unexpected build failure.
- d6160208c3
- bf77bb4c3a
Modifications:
- Move all classes in netty-testsuite from src/test to src/main
- Update the 'compile' scope dependencies of netty-testsuite
- Override the test directory configuration properties of the surefire
plugin
- Do not generate the test JAR anymore
- Update the dependency of netty-transport-native-epoll
Result:
It is less error-prone to add a new dependency to netty-testsuite.
Motivation:
It takes too long to download the heap dump from the CI server.
Modifications:
Compress the heap dump as much as possible.
Result:
When heap dump is generated by certain test failure, the generated heap
dump file is about 3 times smaller than before, although the compression
time will increase the build time when the test fails.
Motivation:
So far, our TLS renegotiation test did not test changing cipher suite
during renegotiation explicitly.
Modifications:
- Switch the cipher suite during renegotiation
Result:
We are now sure the cipher suite change works.
Related:
e9685ea45a
Motivation:
SslHandler.unwrap() does not evaluate the handshake status of
SSLEngine.unwrap() when the status of SSLEngine.unwrap() is CLOSED.
It is not correct because the status does not reflect the state of the
handshake currently in progress, accoding to the API documentation of
SSLEngineResult.Status.
Also, sslCloseFuture can be notified earlier than handshake notification
because we call sslCloseFuture.trySuccess() before evaluating handshake
status.
Modifications:
- Notify sslCloseFuture after the unwrap loop is finished
- Add more assertions to SocketSslEchoTest
Result:
Potentially fix the regression caused by:
- e9685ea45a
Motivation:
We have a few sporadic test failures which are only easily reproduceable
in our CI machine. To get more information about the failure, we need
heap and full thread dump at the moment of failure.
Modifications:
- Add TestUtils.dump() method to dump heap and threads
- Modify SocketGatheringWriteTest and SocketSslEchoTest to call
TestUtils.dump() on failure
Result:
We get more information about the test failure.
Related: #3125
Motivation:
We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.
Modifications:
- Add SslHandler.renegotiate() so that a user can initiate TLS
renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
recent handshake so that a user can get the future of the last
renegotiation
- Add the test for renegotiation to SocketSslEchoTest
Result:
Both client-initiated and server-initiated renegotiations are now
supported properly.
Related: #2964
Motivation:
Writing a zero-length FileRegion to an NIO channel will lead to an
infinite loop.
Modification:
- Do not write a zero-length FileRegion by protecting with proper 'if'.
- Update the testsuite
Result:
Another bug fixed
Motivation:
We see occational failures in the datagram tests saying 'address already
in use' when we attempt to bind on a port returned by
TestUtils.getFreePort().
It turns out that TestUtils.getFreePort() only checks if TCP port is
available.
Modifications:
Also check if UDP port is available, so that the datagram tests do not
fail because of the 'address already in use' error during a bind
attempt.
Result:
Less chance of datagram test failures
Motivation:
Due incorrect usage of CompositeByteBuf a buffer leak was introduced.
Modifications:
Correctly handle tests with CompositeByteBuf.
Result:
No more buffer leaks
