Motivation:
8dc6ad5 introduced IPV6-mapped-IPV4 address support but
copied the addresses incorrectly. It copied the first
4 bytes of the ipv6 address to the address byte array
at offset 12, instead of the other way around.
7a547aa implemented this correctly in netty_unix_socket.c
but it seems the change should've been applied to
netty_epoll_native.c as well.
The current behaviour will always set the address to
`0.0.0.0`.
Modifications:
Copy the correct bytes from the ipv6 mapped ipv4 address.
I.e. copy 4 bytes at offset 12 from the native address
to the byte array `addr` at offset 0.
Result:
When using recvmmsg with IPV6-mapped-IPV4 addresses,
the address will be correctly copied to the byte array
`addr` in the NativeDatagramPacket instance.
Motivation:
In next major version of netty users should use ChannelHandler everywhere. We should ensure we do the same
Modifications:
Replace usage of deprecated classes / interfaces with ChannelHandler
Result:
Use non-deprecated code
Motivation:
https://github.com/netty/netty/pull/9797 changed the code for recvmmsg and sendmmsg to use the syscalls directly to remvove the dependency on newer GLIBC versions. Unfortunally it made the assumption that the syscall numbers are the same for different architectures, which is not the case.
Thanks to @jayv for pointing it out
Modifications:
Add #if, #elif and #else declarations to ensure we pick the correct syscall number (or not support if if the architecture is not supported atm).
Result:
Pick the correct syscall number depending on the architecture.
Motivation:
Netty uses epoll edge-triggered by default forever and there is really not reason why someone should use level-triggered (its considered a implementation detail).
Modifications:
- Remove code that was related to level-triggered mode
- Adjust testclass names
Result:
Fixes https://github.com/netty/netty/issues/9349
Motivation:
At some point we added spliceTo(...) support which was never really used and so we should better take the chance and remove it again now as part of the next major release
Modifications:
Remove spliceTo(...) related code
Result:
Less code to maintain
Motivation:
Due a bug we did not correctly set the writerIndex of the ByteBuf when a
user specified EpollChannelOption.MAX_DATAGRAM_PAYLOAD_SIZE but we ended
up with a non scattering read.
Modifications:
- Set writerIndex to the correct value
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/9788
Motivation:
394a1b3485 introduced a hard dependency on GLIBC 2.12 which was not the case before. This had the effect of not be able to use the native epoll transports on platforms which ship with earlier versions of GLIBC.
To make things a backward compatible as possible we should not introduce such changes in a bugfix release.
Special thanks to @weissi with all the help to fix this.
Modifications:
- Use syscalls directly to remove dependency on GLIBC 2.12
- Make code consistent that needs newer GLIBC versions
- Adjust scattering read test to only run if recvmmsg syscall is supported
- Cleanup pom.xml as some stuff is not needed anymore after using syscalls.
Result:
Fixes https://github.com/netty/netty/issues/9758.
Motivation
Per javadoc in 4.1.x SimpleChannelInboundHandler:
"Please keep in mind that channelRead0(ChannelHandlerContext, I) will be
renamed to messageReceived(ChannelHandlerContext, I) in 5.0."
Modifications
Rename aforementioned method and all references/overrides.
Result
Method is renamed.
Motivation
The current event loop shutdown logic is quite fragile and in the
epoll/NIO cases relies on the default 1 second wait/select timeout that
applies when there are no scheduled tasks. Without this default timeout
the shutdown would hang indefinitely.
The timeout only takes effect in this case because queued scheduled
tasks are first cancelled in
SingleThreadEventExecutor#confirmShutdown(), but I _think_ even this
isn't robust, since the main task queue is subsequently serviced which
could result in some new scheduled task being queued with much later
deadline.
It also means shutdowns are unnecessarily delayed by up to 1 second.
Modifications
- Add/extend unit tests to expose the issue
- Adjust SingleThreadEventExecutor shutdown and confirmShutdown methods
to explicitly add no-op tasks to the taskQueue so that the subsequent
event loop iteration doesn't enter blocking wait (as looks like was
originally intended)
Results
Faster and more robust shutdown of event loops, allows removal of the default wait timeout.
This is a port of https://github.com/netty/netty/pull/9616
Motivation:
There is a goto statement above the current position of initialize dynamicMethods, and dynamicMethods is used after the goto which might cause undefined behavior.
Modifications:
Initialize dynamicMehtods at the top.
Result:
No more undefined behavior.
Motivation
This is another iteration of #9476.
Modifications
Instead of maintaining a count of all writes performed and then using
reads during shutdown to ensure all are accounted for, just set a flag
after each write and don't reset it until the corresponding event has
been returned from epoll_wait.
This requires that while a write is still pending we don't reset
wakenUp, i.e. continue to block writes from the wakeup() method.
Result
Race condition eliminated. Fixes#9362
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
The build script for the module Netty Transport Native Epoll can cause
intermittent build break due to broken pipe by /usr/bin/ldd. This issue
likely to occur on a build environment with multiple processors.
Modifications:
The root cause is that the consumer head command finishes earlier the
producer ldd command. Buffering the outputs of the ldd command by an
intermediate tail command avoids the broken pipe.
Result:
A build on multiple processors can finish successfully.
Signed-off-by: Tatsushi Inagaki <e29253@jp.ibm.com>
Motivation:
aebe206 added support for using a ChannelOption to set / get Buffer sizes but did not add the methods to the DomainSocketChannelConfig interface itself (due not be able to break the API)
Modifications:
Add methods to interface (as this is a next major release)
Result:
Easier access to configure these buffer sizes
Motivation:
At the moment we not consistently (and also not correctly) free allocated native memory in all cases during loading the JNI library. This can lead to native memory leaks in the unlikely case of failure while trying to load the library.
Beside this we also not always correctly handle the case when a new java object can not be created in native code because of out of memory.
Modification:
- Copy some macros from netty-tcnative to be able to handle errors in a more easy fashion
- Correctly account for New* functions to return NULL
- Share code
Result:
More robust and clean JNI code
Motivation:
Running tests with a `KQueueDomainSocketChannel` showed worse performance than an `NioSocketChannel`. It turns out that the default send buffer size for Nio sockets is 64k while for KQueue sockets it's 8k. I verified that manually setting the socket's send buffer size improved perf to expected levels.
Modification:
Plumb the `SO_SNDBUF` and `SO_RCVBUF` options into the `*DomainSocketChannelConfig`.
Result:
Can now configure send and receive buffer sizes for domain sockets.
Motivation:
We should correctly reset the cached local and remote address when a Channel.disconnect() is called and the channel has a notion of disconnect vs close (for example DatagramChannel implementations).
Modifications:
- Correctly reset cached kicak abd remote address
- Update testcase to cover it and so ensure all transports work in a consistent way
Result:
Correctly handle disconnect()
Motivation:
291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.
Modifications:
- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails
Result:
No more IndexOutOfBoundsException
Motivation:
394a1b3485 added support for recvmmsg(...) for unconnected datagram channels, this change also allows to use recvmmsg(...) with connected datagram channels.
Modifications:
- Always try to use recvmmsg(...) if configured to do so
- Adjust unit test to cover it
Result:
Less syscalls when reading datagram packets
Motivation:
We should also use sendmmsg on connected channels whenever possible to reduce the overhead of syscalls.
Modifications:
No matter if the channel is connected or not try to use sendmmsg when supported to reduce the overhead of syscalls
Result:
Better performance on connected UDP channels due less syscalls
Motivation:
394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.
Modifications:
- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug
Result:
Correctly handle ipv6 mapped ipv4 addresses
Motivation:
When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.
Modifications:
- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests
Result:
Fixes https://github.com/netty/netty/issues/8446.
Motivation:
There are some extra log level checks (logger.isWarnEnabled()).
Modification:
Remove log level checks (logger.isWarnEnabled()) from io.netty.channel.epoll.AbstractEpollStreamChannel, io.netty.channel.DefaultFileRegion, io.netty.channel.nio.AbstractNioChannel, io.netty.util.HashedWheelTimer, io.netty.handler.stream.ChunkedWriteHandler and io.netty.channel.udt.nio.NioUdtMessageConnectorChannel
Result:
Fixes#9456
Motivation:
We should not only include the java source files but also the c source file in our source jars.
Modifications:
Add files from src/main/c as well
Result:
Fixes https://github.com/netty/netty/issues/9494
Motivation
Currently an epoll_ctl syscall is made every time there is a change to
the event interest flags (EPOLLIN, EPOLLOUT, etc) of a channel. These
are only done in the event loop so can be aggregated into 0 or 1 such
calls per channel prior to the next call to epoll_wait.
Modifications
I think further streamlining/simplification is possible but for now I've
tried to minimize structural changes and added the aggregation beneath
the existing flag manipulation logic.
A new AbstractChannel#activeFlags field records the flags last set on
the epoll fd for that channel. Calls to setFlag/clearFlag update the
flags field as before but instead of calling epoll_ctl immediately, just
set or clear a bit for the channel in a new bitset in the associated
EpollEventLoop to reflect whether there's any change to the last set
value.
Prior to calling epoll_wait the event loop makes the appropriate
epoll_ctl(EPOLL_CTL_MOD) call once for each channel who's bit is set.
Result
Fewer syscalls, particularly in some auto-read=false cases. Simplified
error handling from centralization of these calls.
Motivation:
EpollDatagramChannel#localAddress returns wrong information when
EpollDatagramChannel is created with InternetProtocolFamily,
and EpollDatagramChannel#localAddress is invoked BEFORE the actual binding.
This is a regression caused by change
e17ce934da
Modifications:
EpollDatagramChannel() and EpollDatagramChannel(InternetProtocolFamily family)
do not cache local/remote address
Result:
Rebinding on the same address without "reuse port" works
EpollDatagramChannel#localAddress returns correct address
Motivation:
On openSUSE (probably more), 64 bit builds use lib64, e.g. /usr/lib64, and
configure picks this up and builds the native library in
native-build/target/lib64 where maven is not looking.
Modifications:
Explicitly specify --libdir=${project.build.directory}/native-build/target/lib
during configuration.
Result:
Maven uses the correct lib directory.
Motivation:
We recently made a change to use ET for the eventfd and not trigger a read each time. This testcase proves everything works as expected.
Modifications:
Add testcase that verifies thqat the wakeups happen correctly
Result:
More tests
Motivation
The AbstractEpollStreamChannel::spliceTo(FileDescriptor, ...) methods
take an offset parameter but this was effectively ignored due to what
looks like a typo in the corresponding JNI function impl. Instead it
would always use the file's own native offset.
Modification
- Fix typo in netty_epoll_native_splice0() and offset accounting in
AbstractEpollStreamChannel::SpliceFdTask.
- Modify unit test to include an invocation of the public spliceTo
method using non-zero offset.
Result
spliceTo FD methods work as expected when an offset is provided.
Motivation
I noticed this while looking at something else.
AbstractEpollStreamChannel::spliceQueue is an MPSC queue but only
accessed from the event loop. So it could be just changed to e.g. an
ArrayDeque. This PR instead reverts to using is as an MPSC queue to
avoid dispatching a task to the EL, as appears was the original
intention.
Modification
Change AbstractEpollStreamChannel::spliceQueue to be volatile and lazily
initialized via double-checked locking. Add tasks directly to the queue
from the public methods rather than possibly waking the EL just to
enqueue.
An alternative is just to change PlatformDependent.newMpscQueue() to new
ArrayDeque() and be done with it :)
Result
Less disruptive channel/fd-splicing.
Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
Compiling with -Werror,-Wuninitialized complains about the sockaddrs being uninitialized.
I believe this is because the init function netty_unix_socket_initSockaddr is in a
separate compilation unit. Since this code isn't on the criticial path, it's easy
to just memset the variables rather than suppress the warning.
Modification:
Always clear the sockaddrs, even if they will be initialized later.
Result:
Able to compile with warnings turned on
Motivation:
Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation
Modifications:
Add missing `@Override`s
Result:
Code cleanup
Motivation:
We did not have support for enable / disable loopback mode in our native epoll transport and also missed the implemention to access the configured interface.
Modifications:
Add implementation and adjust test to cover it
Result:
More complete multicast support with native epoll transport
Motivation:
The wakeup logic in EpollEventLoop is overly complex
Modification:
* Simplify the race to wakeup the loop
* Dont let the event loop wake up itself (it's already awake!)
* Make event loop check if there are any more tasks after preparing to
sleep. There is small window where the non-eventloop writers can issue
eventfd writes here, but that is okay.
Result:
Cleaner wakeup logic.
Benchmarks:
```
BEFORE
Benchmark Mode Cnt Score Error Units
EpollSocketChannelBenchmark.executeMulti thrpt 20 408381.411 ± 2857.498 ops/s
EpollSocketChannelBenchmark.executeSingle thrpt 20 157022.360 ± 1240.573 ops/s
EpollSocketChannelBenchmark.pingPong thrpt 20 60571.704 ± 331.125 ops/s
Benchmark Mode Cnt Score Error Units
EpollSocketChannelBenchmark.executeMulti thrpt 20 440546.953 ± 1652.823 ops/s
EpollSocketChannelBenchmark.executeSingle thrpt 20 168114.751 ± 1176.609 ops/s
EpollSocketChannelBenchmark.pingPong thrpt 20 61231.878 ± 520.108 ops/s
```
Motivation:
We do not need to issue a read on timerfd and eventfd when the EventLoop wakes up if we register these as Edge-Triggered. This removes the overhead of 2 syscalls and so helps to reduce latency.
Modifications:
- Ensure we register the timerfd and eventfd with EPOLLET flag
- If eventfd_write fails with EAGAIN, call eventfd_read and try eventfd_write again as we only use it as wake-up mechanism.
Result:
Less syscalls and so reducing overhead.
Co-authored-by: Carl Mastrangelo <carl@carlmastrangelo.com>
Motivation:
When EpollDatagramChannel is created with an existing FileDescriptor we should detect the correct InternetProtocolFamily.
Modifications:
Obtain the InternetProtocolFamily from the given FD
Result:
Use correct InternetProtocolFamily when EpollDatagramChannel is created via existing FileDescriptor
Motivation:
Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).
Modification:
Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.
Result:
Provides epoll transport multicast for common use cases.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.
Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.
As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.
The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed
Modifications:
- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop
Result:
KQueue and Epoll native transports correctly handle FD reuse
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation
These aren't needed, only one field from each class is used. It also showed as an ambiguous identifier compilation error in my IDE even though javac is obviously fine with it.
Modifications
Static-import explicit ChannelOption fields in EpollDomainSocketChannelConfig instead of using .* wildcard.
Result
Cleaner / more consistent code.
Motivation
These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.
Modifications
Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.
Result
Less code.
Motivation:
At the moment we throw a ChannelException if netty_epoll_linuxsocket_setTcpMd5Sig fails. This is inconsistent with other methods which throw a IOException.
Modifications:
Throw IOException
Result:
More correct and consistent exception usage in epoll transport
Motivation:
We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.
Modifications:
- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.
Result:
Better test coverage
Motivation:
When netty_epoll_linuxsocket_setTcpMd5Sig fails to init the sockaddr we should throw an exception and not silently return.
Modifications:
Throw exception if init of sockaddr fails.
Result:
Correctly report back error to user.
Motivation:
We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.
Modifications:
- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests
Result:
Fixes https://github.com/netty/netty/issues/8521.
…nterface, block or loopback-mode-disabled operations).
Motivation:
Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).
Modification:
Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.
Result:
Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
