rocksdb/db/version_builder.cc

930 lines
30 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/version_builder.h"
#include <algorithm>
#include <atomic>
#include <cinttypes>
#include <functional>
#include <map>
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
#include <memory>
#include <set>
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
#include <sstream>
#include <thread>
#include <unordered_map>
#include <unordered_set>
#include <utility>
#include <vector>
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
#include "db/blob/blob_file_meta.h"
#include "db/dbformat.h"
#include "db/internal_stats.h"
#include "db/table_cache.h"
#include "db/version_set.h"
#include "port/port.h"
#include "table/table_reader.h"
#include "util/string_util.h"
namespace ROCKSDB_NAMESPACE {
bool NewestFirstBySeqNo(FileMetaData* a, FileMetaData* b) {
if (a->fd.largest_seqno != b->fd.largest_seqno) {
return a->fd.largest_seqno > b->fd.largest_seqno;
}
if (a->fd.smallest_seqno != b->fd.smallest_seqno) {
return a->fd.smallest_seqno > b->fd.smallest_seqno;
}
// Break ties by file number
return a->fd.GetNumber() > b->fd.GetNumber();
}
namespace {
bool BySmallestKey(FileMetaData* a, FileMetaData* b,
const InternalKeyComparator* cmp) {
int r = cmp->Compare(a->smallest, b->smallest);
if (r != 0) {
return (r < 0);
}
// Break ties by file number
return (a->fd.GetNumber() < b->fd.GetNumber());
}
} // namespace
class VersionBuilder::Rep {
private:
// Helper to sort files_ in v
// kLevel0 -- NewestFirstBySeqNo
// kLevelNon0 -- BySmallestKey
struct FileComparator {
enum SortMethod { kLevel0 = 0, kLevelNon0 = 1, } sort_method;
const InternalKeyComparator* internal_comparator;
FileComparator() : internal_comparator(nullptr) {}
bool operator()(FileMetaData* f1, FileMetaData* f2) const {
switch (sort_method) {
case kLevel0:
return NewestFirstBySeqNo(f1, f2);
case kLevelNon0:
return BySmallestKey(f1, f2, internal_comparator);
}
assert(false);
return false;
}
};
struct LevelState {
std::unordered_set<uint64_t> deleted_files;
// Map from file number to file meta data.
std::unordered_map<uint64_t, FileMetaData*> added_files;
};
class BlobFileMetaDataDelta {
public:
bool IsEmpty() const {
return !shared_meta_ && !additional_garbage_count_ &&
!additional_garbage_bytes_;
}
std::shared_ptr<SharedBlobFileMetaData> GetSharedMeta() const {
return shared_meta_;
}
uint64_t GetAdditionalGarbageCount() const {
return additional_garbage_count_;
}
uint64_t GetAdditionalGarbageBytes() const {
return additional_garbage_bytes_;
}
void SetSharedMeta(std::shared_ptr<SharedBlobFileMetaData> shared_meta) {
assert(!shared_meta_);
assert(shared_meta);
shared_meta_ = std::move(shared_meta);
}
void AddGarbage(uint64_t count, uint64_t bytes) {
additional_garbage_count_ += count;
additional_garbage_bytes_ += bytes;
}
private:
std::shared_ptr<SharedBlobFileMetaData> shared_meta_;
uint64_t additional_garbage_count_ = 0;
uint64_t additional_garbage_bytes_ = 0;
};
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
const FileOptions& file_options_;
const ImmutableCFOptions* const ioptions_;
TableCache* table_cache_;
VersionStorageInfo* base_vstorage_;
VersionSet* version_set_;
int num_levels_;
LevelState* levels_;
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
// Store sizes of levels larger than num_levels_. We do this instead of
// storing them in levels_ to avoid regression in case there are no files
// on invalid levels. The version is not consistent if in the end the files
// on invalid levels don't cancel out.
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
std::unordered_map<int, size_t> invalid_level_sizes_;
// Whether there are invalid new files or invalid deletion on levels larger
// than num_levels_.
bool has_invalid_levels_;
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
// Current levels of table files affected by additions/deletions.
std::unordered_map<uint64_t, int> table_file_levels_;
FileComparator level_zero_cmp_;
FileComparator level_nonzero_cmp_;
// Metadata delta for all blob files affected by the series of version edits.
std::map<uint64_t, BlobFileMetaDataDelta> blob_file_meta_deltas_;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
public:
Rep(const FileOptions& file_options, const ImmutableCFOptions* ioptions,
TableCache* table_cache, VersionStorageInfo* base_vstorage,
VersionSet* version_set)
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
: file_options_(file_options),
ioptions_(ioptions),
table_cache_(table_cache),
base_vstorage_(base_vstorage),
version_set_(version_set),
num_levels_(base_vstorage->num_levels()),
has_invalid_levels_(false) {
assert(ioptions_);
levels_ = new LevelState[num_levels_];
level_zero_cmp_.sort_method = FileComparator::kLevel0;
level_nonzero_cmp_.sort_method = FileComparator::kLevelNon0;
level_nonzero_cmp_.internal_comparator =
base_vstorage_->InternalComparator();
}
~Rep() {
for (int level = 0; level < num_levels_; level++) {
const auto& added = levels_[level].added_files;
for (auto& pair : added) {
UnrefFile(pair.second);
}
}
delete[] levels_;
}
void UnrefFile(FileMetaData* f) {
f->refs--;
if (f->refs <= 0) {
if (f->table_reader_handle) {
assert(table_cache_ != nullptr);
table_cache_->ReleaseHandle(f->table_reader_handle);
f->table_reader_handle = nullptr;
}
delete f;
}
}
bool IsBlobFileInVersion(uint64_t blob_file_number) const {
auto delta_it = blob_file_meta_deltas_.find(blob_file_number);
if (delta_it != blob_file_meta_deltas_.end()) {
if (delta_it->second.GetSharedMeta()) {
return true;
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
}
assert(base_vstorage_);
const auto& base_blob_files = base_vstorage_->GetBlobFiles();
auto base_it = base_blob_files.find(blob_file_number);
if (base_it != base_blob_files.end()) {
assert(base_it->second);
assert(base_it->second->GetSharedMeta());
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
return true;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
}
return false;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
}
Status CheckConsistencyOfOldestBlobFileReference(
const VersionStorageInfo* vstorage, uint64_t blob_file_number) const {
assert(vstorage);
// TODO: remove this check once we actually start recoding metadata for
// blob files in the MANIFEST.
if (vstorage->GetBlobFiles().empty()) {
return Status::OK();
}
if (blob_file_number == kInvalidBlobFileNumber) {
return Status::OK();
}
if (!IsBlobFileInVersion(blob_file_number)) {
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
std::ostringstream oss;
oss << "Blob file #" << blob_file_number
<< " is not part of this version";
return Status::Corruption("VersionBuilder", oss.str());
}
return Status::OK();
}
Status CheckConsistency(VersionStorageInfo* vstorage) {
#ifdef NDEBUG
if (!vstorage->force_consistency_checks()) {
// Dont run consistency checks in release mode except if
// explicitly asked to
return Status::OK();
}
#endif
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
// Make sure the files are sorted correctly and that the oldest blob file
// reference for each table file points to a valid blob file in this
// version.
for (int level = 0; level < num_levels_; level++) {
auto& level_files = vstorage->LevelFiles(level);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
if (level_files.empty()) {
continue;
}
assert(level_files[0]);
Status s = CheckConsistencyOfOldestBlobFileReference(
vstorage, level_files[0]->oldest_blob_file_number);
if (!s.ok()) {
return s;
}
for (size_t i = 1; i < level_files.size(); i++) {
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
assert(level_files[i]);
s = CheckConsistencyOfOldestBlobFileReference(
vstorage, level_files[i]->oldest_blob_file_number);
if (!s.ok()) {
return s;
}
auto f1 = level_files[i - 1];
auto f2 = level_files[i];
if (level == 0) {
#ifndef NDEBUG
auto pair = std::make_pair(&f1, &f2);
TEST_SYNC_POINT_CALLBACK("VersionBuilder::CheckConsistency0", &pair);
#endif
if (!level_zero_cmp_(f1, f2)) {
fprintf(stderr, "L0 files are not sorted properly");
return Status::Corruption("L0 files are not sorted properly");
}
if (f2->fd.smallest_seqno == f2->fd.largest_seqno) {
// This is an external file that we ingested
SequenceNumber external_file_seqno = f2->fd.smallest_seqno;
if (!(external_file_seqno < f1->fd.largest_seqno ||
external_file_seqno == 0)) {
fprintf(stderr,
"L0 file with seqno %" PRIu64 " %" PRIu64
" vs. file with global_seqno %" PRIu64 "\n",
f1->fd.smallest_seqno, f1->fd.largest_seqno,
external_file_seqno);
return Status::Corruption(
"L0 file with seqno " +
NumberToString(f1->fd.smallest_seqno) + " " +
NumberToString(f1->fd.largest_seqno) +
" vs. file with global_seqno" +
NumberToString(external_file_seqno) + " with fileNumber " +
NumberToString(f1->fd.GetNumber()));
}
} else if (f1->fd.smallest_seqno <= f2->fd.smallest_seqno) {
fprintf(stderr,
"L0 files seqno %" PRIu64 " %" PRIu64 " vs. %" PRIu64
" %" PRIu64 "\n",
f1->fd.smallest_seqno, f1->fd.largest_seqno,
f2->fd.smallest_seqno, f2->fd.largest_seqno);
return Status::Corruption(
"L0 files seqno " + NumberToString(f1->fd.smallest_seqno) +
" " + NumberToString(f1->fd.largest_seqno) + " " +
NumberToString(f1->fd.GetNumber()) + " vs. " +
NumberToString(f2->fd.smallest_seqno) + " " +
NumberToString(f2->fd.largest_seqno) + " " +
NumberToString(f2->fd.GetNumber()));
}
} else {
#ifndef NDEBUG
auto pair = std::make_pair(&f1, &f2);
TEST_SYNC_POINT_CALLBACK("VersionBuilder::CheckConsistency1", &pair);
#endif
if (!level_nonzero_cmp_(f1, f2)) {
fprintf(stderr, "L%d files are not sorted properly", level);
return Status::Corruption("L" + NumberToString(level) +
" files are not sorted properly");
}
// Make sure there is no overlap in levels > 0
if (vstorage->InternalComparator()->Compare(f1->largest,
f2->smallest) >= 0) {
fprintf(stderr, "L%d have overlapping ranges %s vs. %s\n", level,
(f1->largest).DebugString(true).c_str(),
(f2->smallest).DebugString(true).c_str());
return Status::Corruption(
"L" + NumberToString(level) + " have overlapping ranges " +
(f1->largest).DebugString(true) + " vs. " +
(f2->smallest).DebugString(true));
}
}
}
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
// Make sure that all blob files in the version have non-garbage data.
const auto& blob_files = vstorage->GetBlobFiles();
for (const auto& pair : blob_files) {
const auto& blob_file_meta = pair.second;
assert(blob_file_meta);
if (blob_file_meta->GetGarbageBlobCount() >=
blob_file_meta->GetTotalBlobCount()) {
std::ostringstream oss;
oss << "Blob file #" << blob_file_meta->GetBlobFileNumber()
<< " consists entirely of garbage";
return Status::Corruption("VersionBuilder", oss.str());
}
}
Status ret_s;
TEST_SYNC_POINT_CALLBACK("VersionBuilder::CheckConsistencyBeforeReturn",
&ret_s);
return ret_s;
}
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
bool CheckConsistencyForNumLevels() const {
// Make sure there are no files on or beyond num_levels().
if (has_invalid_levels_) {
return false;
}
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
for (const auto& pair : invalid_level_sizes_) {
const size_t level_size = pair.second;
if (level_size != 0) {
return false;
}
}
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
return true;
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
Status ApplyBlobFileAddition(const BlobFileAddition& blob_file_addition) {
const uint64_t blob_file_number = blob_file_addition.GetBlobFileNumber();
if (IsBlobFileInVersion(blob_file_number)) {
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
std::ostringstream oss;
oss << "Blob file #" << blob_file_number << " already added";
return Status::Corruption("VersionBuilder", oss.str());
}
// Note: we use C++11 for now but in C++14, this could be done in a more
// elegant way using generalized lambda capture.
VersionSet* const vs = version_set_;
const ImmutableCFOptions* const ioptions = ioptions_;
auto deleter = [vs, ioptions](SharedBlobFileMetaData* shared_meta) {
if (vs) {
assert(ioptions);
assert(!ioptions->cf_paths.empty());
assert(shared_meta);
vs->AddObsoleteBlobFile(shared_meta->GetBlobFileNumber(),
ioptions->cf_paths.front().path);
}
delete shared_meta;
};
auto shared_meta = SharedBlobFileMetaData::Create(
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
blob_file_number, blob_file_addition.GetTotalBlobCount(),
blob_file_addition.GetTotalBlobBytes(),
blob_file_addition.GetChecksumMethod(),
blob_file_addition.GetChecksumValue(), deleter);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
blob_file_meta_deltas_[blob_file_number].SetSharedMeta(
std::move(shared_meta));
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
return Status::OK();
}
Status ApplyBlobFileGarbage(const BlobFileGarbage& blob_file_garbage) {
const uint64_t blob_file_number = blob_file_garbage.GetBlobFileNumber();
if (!IsBlobFileInVersion(blob_file_number)) {
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
std::ostringstream oss;
oss << "Blob file #" << blob_file_number << " not found";
return Status::Corruption("VersionBuilder", oss.str());
}
blob_file_meta_deltas_[blob_file_number].AddGarbage(
blob_file_garbage.GetGarbageBlobCount(),
blob_file_garbage.GetGarbageBlobBytes());
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
return Status::OK();
}
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
int GetCurrentLevelForTableFile(uint64_t file_number) const {
auto it = table_file_levels_.find(file_number);
if (it != table_file_levels_.end()) {
return it->second;
}
assert(base_vstorage_);
return base_vstorage_->GetFileLocation(file_number).GetLevel();
}
Status ApplyFileDeletion(int level, uint64_t file_number) {
assert(level != VersionStorageInfo::FileLocation::Invalid().GetLevel());
const int current_level = GetCurrentLevelForTableFile(file_number);
if (level != current_level) {
if (level >= num_levels_) {
has_invalid_levels_ = true;
}
std::ostringstream oss;
oss << "Cannot delete table file #" << file_number << " from level "
<< level << " since it is ";
if (current_level ==
VersionStorageInfo::FileLocation::Invalid().GetLevel()) {
oss << "not in the LSM tree";
} else {
oss << "on level " << current_level;
}
return Status::Corruption("VersionBuilder", oss.str());
}
if (level >= num_levels_) {
assert(invalid_level_sizes_[level] > 0);
--invalid_level_sizes_[level];
table_file_levels_[file_number] =
VersionStorageInfo::FileLocation::Invalid().GetLevel();
return Status::OK();
}
auto& level_state = levels_[level];
auto& add_files = level_state.added_files;
auto add_it = add_files.find(file_number);
if (add_it != add_files.end()) {
UnrefFile(add_it->second);
add_files.erase(add_it);
} else {
auto& del_files = level_state.deleted_files;
assert(del_files.find(file_number) == del_files.end());
del_files.emplace(file_number);
}
table_file_levels_[file_number] =
VersionStorageInfo::FileLocation::Invalid().GetLevel();
return Status::OK();
}
Status ApplyFileAddition(int level, const FileMetaData& meta) {
assert(level != VersionStorageInfo::FileLocation::Invalid().GetLevel());
const uint64_t file_number = meta.fd.GetNumber();
const int current_level = GetCurrentLevelForTableFile(file_number);
if (current_level !=
VersionStorageInfo::FileLocation::Invalid().GetLevel()) {
if (level >= num_levels_) {
has_invalid_levels_ = true;
}
std::ostringstream oss;
oss << "Cannot add table file #" << file_number << " to level " << level
<< " since it is already in the LSM tree on level " << current_level;
return Status::Corruption("VersionBuilder", oss.str());
}
if (level >= num_levels_) {
++invalid_level_sizes_[level];
table_file_levels_[file_number] = level;
return Status::OK();
}
auto& level_state = levels_[level];
auto& del_files = level_state.deleted_files;
auto del_it = del_files.find(file_number);
if (del_it != del_files.end()) {
del_files.erase(del_it);
} else {
FileMetaData* const f = new FileMetaData(meta);
f->refs = 1;
auto& add_files = level_state.added_files;
assert(add_files.find(file_number) == add_files.end());
add_files.emplace(file_number, f);
}
table_file_levels_[file_number] = level;
return Status::OK();
}
// Apply all of the edits in *edit to the current state.
Status Apply(VersionEdit* edit) {
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
{
const Status s = CheckConsistency(base_vstorage_);
if (!s.ok()) {
return s;
}
}
// Delete files
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
for (const auto& deleted_file : edit->GetDeletedFiles()) {
const int level = deleted_file.first;
const uint64_t file_number = deleted_file.second;
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
const Status s = ApplyFileDeletion(level, file_number);
if (!s.ok()) {
return s;
}
}
// Add new files
for (const auto& new_file : edit->GetNewFiles()) {
const int level = new_file.first;
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
const FileMetaData& meta = new_file.second;
const Status s = ApplyFileAddition(level, meta);
if (!s.ok()) {
return s;
}
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
// Add new blob files
for (const auto& blob_file_addition : edit->GetBlobFileAdditions()) {
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
const Status s = ApplyBlobFileAddition(blob_file_addition);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
if (!s.ok()) {
return s;
}
}
// Increase the amount of garbage for blob files affected by GC
for (const auto& blob_file_garbage : edit->GetBlobFileGarbages()) {
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
const Status s = ApplyBlobFileGarbage(blob_file_garbage);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
if (!s.ok()) {
return s;
}
}
Improve consistency checks in VersionBuilder (#6901) Summary: The patch cleans up the code and improves the consistency checks around adding/deleting table files in `VersionBuilder`. Namely, it makes the checks stricter and improves them in the following ways: 1) A table file can now only be deleted from the LSM tree using the level it resides on. Earlier, there was some unnecessary wiggle room for trivially moved files (they could be deleted using a lower level number than the actual one). 2) A table file cannot be added to the tree if it is already present in the tree on any level (not just the target level). The earlier code only had an assertion (which is a no-op in release builds) that the newly added file is not already present on the target level. 3) The above consistency checks around state transitions are now mandatory, as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op in release mode unless `force_consistency_checks` was set to `true`. The rationale here is that assuming that the initial state is consistent, a valid transition leads to a next state that is also consistent; however, an *invalid* transition offers no such guarantee. Hence it makes sense to validate the transitions unconditionally, and save `force_consistency_checks` for the paranoid checks that re-validate the entire state. 4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862, which enables us to efficiently look up the location (level and position within level) of files in a `Version` by file number. This makes the consistency checks much more efficient than the earlier `CheckConsistencyForDeletes`, which essentially performed a linear search. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901 Test Plan: Extended the unit tests and ran: `make check` `make whitebox_crash_test` Reviewed By: ajkr Differential Revision: D21822714 Pulled By: ltamasi fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
2020-06-03 20:21:16 +02:00
return Status::OK();
}
static std::shared_ptr<BlobFileMetaData> CreateMetaDataForNewBlobFile(
const BlobFileMetaDataDelta& delta) {
auto shared_meta = delta.GetSharedMeta();
assert(shared_meta);
auto meta = BlobFileMetaData::Create(std::move(shared_meta),
delta.GetAdditionalGarbageCount(),
delta.GetAdditionalGarbageBytes());
return meta;
}
static std::shared_ptr<BlobFileMetaData>
GetOrCreateMetaDataForExistingBlobFile(
const std::shared_ptr<BlobFileMetaData>& base_meta,
const BlobFileMetaDataDelta& delta) {
assert(base_meta);
assert(!delta.GetSharedMeta());
if (delta.IsEmpty()) {
return base_meta;
}
auto shared_meta = base_meta->GetSharedMeta();
assert(shared_meta);
auto meta = BlobFileMetaData::Create(
std::move(shared_meta),
base_meta->GetGarbageBlobCount() + delta.GetAdditionalGarbageCount(),
base_meta->GetGarbageBlobBytes() + delta.GetAdditionalGarbageBytes());
return meta;
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
void AddBlobFileIfNeeded(
VersionStorageInfo* vstorage,
const std::shared_ptr<BlobFileMetaData>& meta) const {
assert(vstorage);
assert(meta);
if (meta->GetGarbageBlobCount() < meta->GetTotalBlobCount()) {
vstorage->AddBlobFile(meta);
}
}
// Merge the blob file metadata from the base version with the changes (edits)
// applied, and save the result into *vstorage.
void SaveBlobFilesTo(VersionStorageInfo* vstorage) const {
assert(base_vstorage_);
assert(vstorage);
const auto& base_blob_files = base_vstorage_->GetBlobFiles();
auto base_it = base_blob_files.begin();
const auto base_it_end = base_blob_files.end();
auto delta_it = blob_file_meta_deltas_.begin();
const auto delta_it_end = blob_file_meta_deltas_.end();
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
while (base_it != base_it_end && delta_it != delta_it_end) {
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
const uint64_t base_blob_file_number = base_it->first;
const uint64_t delta_blob_file_number = delta_it->first;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
if (base_blob_file_number < delta_blob_file_number) {
const auto& base_meta = base_it->second;
assert(base_meta);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
assert(base_meta->GetGarbageBlobCount() <
base_meta->GetTotalBlobCount());
vstorage->AddBlobFile(base_meta);
++base_it;
} else if (delta_blob_file_number < base_blob_file_number) {
// Note: blob file numbers are strictly increasing over time and
// once blob files get marked obsolete, they never reappear. Thus,
// this case is not possible.
assert(false);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
++delta_it;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
} else {
assert(base_blob_file_number == delta_blob_file_number);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
const auto& base_meta = base_it->second;
const auto& delta = delta_it->second;
auto meta = GetOrCreateMetaDataForExistingBlobFile(base_meta, delta);
AddBlobFileIfNeeded(vstorage, meta);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
++base_it;
++delta_it;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
}
}
while (base_it != base_it_end) {
const auto& base_meta = base_it->second;
assert(base_meta);
assert(base_meta->GetGarbageBlobCount() < base_meta->GetTotalBlobCount());
vstorage->AddBlobFile(base_meta);
++base_it;
}
while (delta_it != delta_it_end) {
const auto& delta = delta_it->second;
auto meta = CreateMetaDataForNewBlobFile(delta);
AddBlobFileIfNeeded(vstorage, meta);
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
++delta_it;
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
}
}
// Save the current state in *v.
Status SaveTo(VersionStorageInfo* vstorage) {
Status s = CheckConsistency(base_vstorage_);
if (!s.ok()) {
return s;
}
s = CheckConsistency(vstorage);
if (!s.ok()) {
return s;
}
for (int level = 0; level < num_levels_; level++) {
const auto& cmp = (level == 0) ? level_zero_cmp_ : level_nonzero_cmp_;
// Merge the set of added files with the set of pre-existing files.
// Drop any deleted files. Store the result in *v.
const auto& base_files = base_vstorage_->LevelFiles(level);
const auto& unordered_added_files = levels_[level].added_files;
vstorage->Reserve(level,
base_files.size() + unordered_added_files.size());
// Sort added files for the level.
std::vector<FileMetaData*> added_files;
added_files.reserve(unordered_added_files.size());
for (const auto& pair : unordered_added_files) {
added_files.push_back(pair.second);
}
std::sort(added_files.begin(), added_files.end(), cmp);
#ifndef NDEBUG
FileMetaData* prev_added_file = nullptr;
for (const auto& added : added_files) {
if (level > 0 && prev_added_file != nullptr) {
assert(base_vstorage_->InternalComparator()->Compare(
prev_added_file->smallest, added->smallest) <= 0);
}
prev_added_file = added;
}
#endif
auto base_iter = base_files.begin();
auto base_end = base_files.end();
auto added_iter = added_files.begin();
auto added_end = added_files.end();
while (added_iter != added_end || base_iter != base_end) {
if (base_iter == base_end ||
(added_iter != added_end && cmp(*added_iter, *base_iter))) {
MaybeAddFile(vstorage, level, *added_iter++);
} else {
MaybeAddFile(vstorage, level, *base_iter++);
}
}
}
Add blob files to VersionStorageInfo/VersionBuilder (#6597) Summary: The patch adds a couple of classes to represent metadata about blob files: `SharedBlobFileMetaData` contains the information elements that are immutable (once the blob file is closed), e.g. blob file number, total number and size of blob files, checksum method/value, while `BlobFileMetaData` contains attributes that can vary across versions like the amount of garbage in the file. There is a single `SharedBlobFileMetaData` for each blob file, which is jointly owned by the `BlobFileMetaData` objects that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s and can also be shared if the (immutable _and_ mutable) state of the blob file is the same in two versions. In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends `VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata to a new `VersionStorageInfo`. Consistency checks are also extended to ensure that table files point to blob files that are part of the `Version`, and that all blob files that are part of any given `Version` have at least some _non_-garbage data in them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D20656803 Pulled By: ltamasi fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
2020-03-27 02:48:55 +01:00
SaveBlobFilesTo(vstorage);
s = CheckConsistency(vstorage);
return s;
}
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
Status LoadTableHandlers(InternalStats* internal_stats, int max_threads,
bool prefetch_index_and_filter_in_cache,
bool is_initial_load,
const SliceTransform* prefix_extractor) {
assert(table_cache_ != nullptr);
size_t table_cache_capacity = table_cache_->get_cache()->GetCapacity();
bool always_load = (table_cache_capacity == TableCache::kInfiniteCapacity);
size_t max_load = port::kMaxSizet;
if (!always_load) {
// If it is initial loading and not set to always loading all the
// files, we only load up to kInitialLoadLimit files, to limit the
// time reopening the DB.
const size_t kInitialLoadLimit = 16;
size_t load_limit;
// If the table cache is not 1/4 full, we pin the table handle to
// file metadata to avoid the cache read costs when reading the file.
// The downside of pinning those files is that LRU won't be followed
// for those files. This doesn't matter much because if number of files
// of the DB excceeds table cache capacity, eventually no table reader
// will be pinned and LRU will be followed.
if (is_initial_load) {
load_limit = std::min(kInitialLoadLimit, table_cache_capacity / 4);
} else {
load_limit = table_cache_capacity / 4;
}
size_t table_cache_usage = table_cache_->get_cache()->GetUsage();
if (table_cache_usage >= load_limit) {
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
// TODO (yanqin) find a suitable status code.
return Status::OK();
} else {
max_load = load_limit - table_cache_usage;
}
}
// <file metadata, level>
std::vector<std::pair<FileMetaData*, int>> files_meta;
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
std::vector<Status> statuses;
for (int level = 0; level < num_levels_; level++) {
for (auto& file_meta_pair : levels_[level].added_files) {
auto* file_meta = file_meta_pair.second;
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
// If the file has been opened before, just skip it.
if (!file_meta->table_reader_handle) {
files_meta.emplace_back(file_meta, level);
statuses.emplace_back(Status::OK());
}
if (files_meta.size() >= max_load) {
break;
}
}
if (files_meta.size() >= max_load) {
break;
}
}
std::atomic<size_t> next_file_meta_idx(0);
std::function<void()> load_handlers_func([&]() {
while (true) {
size_t file_idx = next_file_meta_idx.fetch_add(1);
if (file_idx >= files_meta.size()) {
break;
}
auto* file_meta = files_meta[file_idx].first;
int level = files_meta[file_idx].second;
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
statuses[file_idx] = table_cache_->FindTable(
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
file_options_, *(base_vstorage_->InternalComparator()),
file_meta->fd, &file_meta->table_reader_handle, prefix_extractor,
false /*no_io */, true /* record_read_stats */,
internal_stats->GetFileReadHist(level), false, level,
prefetch_index_and_filter_in_cache);
if (file_meta->table_reader_handle != nullptr) {
// Load table_reader
file_meta->fd.table_reader = table_cache_->GetTableReaderFromHandle(
file_meta->table_reader_handle);
}
}
});
std::vector<port::Thread> threads;
for (int i = 1; i < max_threads; i++) {
threads.emplace_back(load_handlers_func);
}
load_handlers_func();
for (auto& t : threads) {
t.join();
}
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
for (const auto& s : statuses) {
if (!s.ok()) {
return s;
}
}
return Status::OK();
}
void MaybeAddFile(VersionStorageInfo* vstorage, int level, FileMetaData* f) {
if (levels_[level].deleted_files.count(f->fd.GetNumber()) > 0) {
// f is to-be-deleted table file
2015-12-07 19:51:08 +01:00
vstorage->RemoveCurrentStats(f);
} else {
assert(ioptions_);
vstorage->AddFile(level, f, ioptions_->info_log);
}
}
};
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
VersionBuilder::VersionBuilder(const FileOptions& file_options,
const ImmutableCFOptions* ioptions,
TableCache* table_cache,
VersionStorageInfo* base_vstorage,
VersionSet* version_set)
: rep_(new Rep(file_options, ioptions, table_cache, base_vstorage,
version_set)) {}
VersionBuilder::~VersionBuilder() = default;
bool VersionBuilder::CheckConsistencyForNumLevels() {
return rep_->CheckConsistencyForNumLevels();
}
Status VersionBuilder::Apply(VersionEdit* edit) { return rep_->Apply(edit); }
Status VersionBuilder::SaveTo(VersionStorageInfo* vstorage) {
return rep_->SaveTo(vstorage);
}
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
Status VersionBuilder::LoadTableHandlers(
InternalStats* internal_stats, int max_threads,
bool prefetch_index_and_filter_in_cache, bool is_initial_load,
const SliceTransform* prefix_extractor) {
return rep_->LoadTableHandlers(internal_stats, max_threads,
prefetch_index_and_filter_in_cache,
is_initial_load, prefix_extractor);
}
BaseReferencedVersionBuilder::BaseReferencedVersionBuilder(
ColumnFamilyData* cfd)
: version_builder_(new VersionBuilder(
cfd->current()->version_set()->file_options(), cfd->ioptions(),
cfd->table_cache(), cfd->current()->storage_info(),
cfd->current()->version_set())),
version_(cfd->current()) {
version_->Ref();
}
BaseReferencedVersionBuilder::BaseReferencedVersionBuilder(
ColumnFamilyData* cfd, Version* v)
: version_builder_(new VersionBuilder(
cfd->current()->version_set()->file_options(), cfd->ioptions(),
cfd->table_cache(), v->storage_info(), v->version_set())),
version_(v) {
assert(version_ != cfd->current());
}
BaseReferencedVersionBuilder::~BaseReferencedVersionBuilder() {
version_->Unref();
}
} // namespace ROCKSDB_NAMESPACE