2016-02-10 00:12:00 +01:00
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
2017-07-16 01:03:42 +02:00
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
2014-01-28 06:58:46 +01:00
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
|
|
|
|
#pragma once
|
|
|
|
|
2015-07-02 01:13:49 +02:00
|
|
|
#include <stdint.h>
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
2015-05-13 00:53:55 +02:00
|
|
|
#include <string>
|
|
|
|
#include <utility>
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
#include <vector>
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
|
2018-07-28 01:00:26 +02:00
|
|
|
#include "db/dbformat.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
#include "db/table_properties_collector.h"
|
2019-09-16 19:31:27 +02:00
|
|
|
#include "file/writable_file_writer.h"
|
2017-04-06 04:02:00 +02:00
|
|
|
#include "options/cf_options.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
#include "rocksdb/options.h"
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
2015-05-13 00:53:55 +02:00
|
|
|
#include "rocksdb/table_properties.h"
|
2019-06-14 00:39:52 +02:00
|
|
|
#include "trace_replay/block_cache_tracer.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
2020-02-20 21:07:53 +01:00
|
|
|
namespace ROCKSDB_NAMESPACE {
|
2014-01-28 06:58:46 +01:00
|
|
|
|
|
|
|
class Slice;
|
|
|
|
class Status;
|
|
|
|
|
2015-09-11 20:36:33 +02:00
|
|
|
struct TableReaderOptions {
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
2015-12-23 19:15:07 +01:00
|
|
|
// @param skip_filters Disables loading/accessing the filter block
|
2022-01-21 20:36:36 +01:00
|
|
|
TableReaderOptions(
|
|
|
|
const ImmutableOptions& _ioptions,
|
|
|
|
const std::shared_ptr<const SliceTransform>& _prefix_extractor,
|
|
|
|
const EnvOptions& _env_options,
|
|
|
|
const InternalKeyComparator& _internal_comparator,
|
|
|
|
bool _skip_filters = false, bool _immortal = false,
|
|
|
|
bool _force_direct_prefetch = false, int _level = -1,
|
|
|
|
BlockCacheTracer* const _block_cache_tracer = nullptr,
|
|
|
|
size_t _max_file_size_for_l0_meta_pin = 0,
|
|
|
|
const std::string& _cur_db_session_id = "", uint64_t _cur_file_num = 0)
|
2021-06-10 20:01:44 +02:00
|
|
|
: TableReaderOptions(
|
|
|
|
_ioptions, _prefix_extractor, _env_options, _internal_comparator,
|
|
|
|
_skip_filters, _immortal, _force_direct_prefetch, _level,
|
|
|
|
0 /* _largest_seqno */, _block_cache_tracer,
|
|
|
|
_max_file_size_for_l0_meta_pin, _cur_db_session_id, _cur_file_num) {
|
|
|
|
}
|
2018-07-28 01:00:26 +02:00
|
|
|
|
|
|
|
// @param skip_filters Disables loading/accessing the filter block
|
2022-01-21 20:36:36 +01:00
|
|
|
TableReaderOptions(
|
|
|
|
const ImmutableOptions& _ioptions,
|
|
|
|
const std::shared_ptr<const SliceTransform>& _prefix_extractor,
|
|
|
|
const EnvOptions& _env_options,
|
|
|
|
const InternalKeyComparator& _internal_comparator, bool _skip_filters,
|
|
|
|
bool _immortal, bool _force_direct_prefetch, int _level,
|
|
|
|
SequenceNumber _largest_seqno,
|
|
|
|
BlockCacheTracer* const _block_cache_tracer,
|
|
|
|
size_t _max_file_size_for_l0_meta_pin,
|
|
|
|
const std::string& _cur_db_session_id, uint64_t _cur_file_num)
|
2015-09-11 20:36:33 +02:00
|
|
|
: ioptions(_ioptions),
|
2018-05-21 23:33:55 +02:00
|
|
|
prefix_extractor(_prefix_extractor),
|
2015-09-11 20:36:33 +02:00
|
|
|
env_options(_env_options),
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
2015-12-23 19:15:07 +01:00
|
|
|
internal_comparator(_internal_comparator),
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
2016-04-01 19:42:39 +02:00
|
|
|
skip_filters(_skip_filters),
|
2018-06-28 02:09:29 +02:00
|
|
|
immortal(_immortal),
|
2020-05-13 03:21:32 +02:00
|
|
|
force_direct_prefetch(_force_direct_prefetch),
|
2018-07-28 01:00:26 +02:00
|
|
|
level(_level),
|
2019-06-14 00:39:52 +02:00
|
|
|
largest_seqno(_largest_seqno),
|
2020-06-10 01:49:07 +02:00
|
|
|
block_cache_tracer(_block_cache_tracer),
|
2021-06-10 20:01:44 +02:00
|
|
|
max_file_size_for_l0_meta_pin(_max_file_size_for_l0_meta_pin),
|
|
|
|
cur_db_session_id(_cur_db_session_id),
|
|
|
|
cur_file_num(_cur_file_num) {}
|
2015-09-11 20:36:33 +02:00
|
|
|
|
2021-05-05 22:59:21 +02:00
|
|
|
const ImmutableOptions& ioptions;
|
2022-01-21 20:36:36 +01:00
|
|
|
const std::shared_ptr<const SliceTransform>& prefix_extractor;
|
2015-09-11 20:36:33 +02:00
|
|
|
const EnvOptions& env_options;
|
|
|
|
const InternalKeyComparator& internal_comparator;
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
2015-12-23 19:15:07 +01:00
|
|
|
// This is only used for BlockBasedTable (reader)
|
|
|
|
bool skip_filters;
|
2018-06-28 02:09:29 +02:00
|
|
|
// Whether the table will be valid as long as the DB is open
|
|
|
|
bool immortal;
|
2020-05-13 03:21:32 +02:00
|
|
|
// When data prefetching is needed, even if direct I/O is off, read data to
|
|
|
|
// fetch into RocksDB's buffer, rather than relying
|
|
|
|
// RandomAccessFile::Prefetch().
|
|
|
|
bool force_direct_prefetch;
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
// What level this table/file is on, -1 for "not set, don't know." Used
|
|
|
|
// for level-specific statistics.
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
2016-04-01 19:42:39 +02:00
|
|
|
int level;
|
2018-07-28 01:00:26 +02:00
|
|
|
// largest seqno in the table
|
|
|
|
SequenceNumber largest_seqno;
|
2019-06-14 00:39:52 +02:00
|
|
|
BlockCacheTracer* const block_cache_tracer;
|
2020-06-10 01:49:07 +02:00
|
|
|
// Largest L0 file size whose meta-blocks may be pinned (can be zero when
|
|
|
|
// unknown).
|
|
|
|
const size_t max_file_size_for_l0_meta_pin;
|
2021-06-10 20:01:44 +02:00
|
|
|
|
|
|
|
std::string cur_db_session_id;
|
|
|
|
|
|
|
|
uint64_t cur_file_num;
|
2015-09-11 20:36:33 +02:00
|
|
|
};
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
struct TableBuilderOptions {
|
|
|
|
TableBuilderOptions(
|
2021-05-05 22:59:21 +02:00
|
|
|
const ImmutableOptions& _ioptions, const MutableCFOptions& _moptions,
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
const InternalKeyComparator& _internal_comparator,
|
2021-07-06 19:13:40 +02:00
|
|
|
const IntTblPropCollectorFactories* _int_tbl_prop_collector_factories,
|
2021-03-25 22:58:23 +01:00
|
|
|
CompressionType _compression_type,
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
const CompressionOptions& _compression_opts, uint32_t _column_family_id,
|
|
|
|
const std::string& _column_family_name, int _level,
|
|
|
|
bool _is_bottommost = false,
|
|
|
|
TableFileCreationReason _reason = TableFileCreationReason::kMisc,
|
|
|
|
const uint64_t _creation_time = 0, const int64_t _oldest_key_time = 0,
|
2020-06-17 19:55:42 +02:00
|
|
|
const uint64_t _file_creation_time = 0, const std::string& _db_id = "",
|
2021-04-29 15:59:53 +02:00
|
|
|
const std::string& _db_session_id = "",
|
2021-06-10 20:01:44 +02:00
|
|
|
const uint64_t _target_file_size = 0, const uint64_t _cur_file_num = 0)
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
: ioptions(_ioptions),
|
2018-05-21 23:33:55 +02:00
|
|
|
moptions(_moptions),
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
internal_comparator(_internal_comparator),
|
|
|
|
int_tbl_prop_collector_factories(_int_tbl_prop_collector_factories),
|
|
|
|
compression_type(_compression_type),
|
|
|
|
compression_opts(_compression_opts),
|
2021-04-29 15:59:53 +02:00
|
|
|
column_family_id(_column_family_id),
|
2016-09-18 07:30:43 +02:00
|
|
|
column_family_name(_column_family_name),
|
2017-10-24 00:22:05 +02:00
|
|
|
creation_time(_creation_time),
|
Reduce scope of compression dictionary to single SST (#4952)
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
2019-02-12 04:42:25 +01:00
|
|
|
oldest_key_time(_oldest_key_time),
|
Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
2019-04-11 04:24:25 +02:00
|
|
|
target_file_size(_target_file_size),
|
2020-06-17 19:55:42 +02:00
|
|
|
file_creation_time(_file_creation_time),
|
|
|
|
db_id(_db_id),
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
db_session_id(_db_session_id),
|
|
|
|
level_at_creation(_level),
|
|
|
|
is_bottommost(_is_bottommost),
|
2021-06-10 20:01:44 +02:00
|
|
|
reason(_reason),
|
|
|
|
cur_file_num(_cur_file_num) {}
|
2020-06-17 19:55:42 +02:00
|
|
|
|
2021-05-05 22:59:21 +02:00
|
|
|
const ImmutableOptions& ioptions;
|
2018-05-21 23:33:55 +02:00
|
|
|
const MutableCFOptions& moptions;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
const InternalKeyComparator& internal_comparator;
|
2021-07-06 19:13:40 +02:00
|
|
|
const IntTblPropCollectorFactories* int_tbl_prop_collector_factories;
|
2021-04-29 15:59:53 +02:00
|
|
|
const CompressionType compression_type;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
const CompressionOptions& compression_opts;
|
2021-04-29 15:59:53 +02:00
|
|
|
const uint32_t column_family_id;
|
2016-04-07 08:10:32 +02:00
|
|
|
const std::string& column_family_name;
|
2017-06-28 02:02:20 +02:00
|
|
|
const uint64_t creation_time;
|
2017-10-24 00:22:05 +02:00
|
|
|
const int64_t oldest_key_time;
|
Reduce scope of compression dictionary to single SST (#4952)
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
2019-02-12 04:42:25 +01:00
|
|
|
const uint64_t target_file_size;
|
Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
2019-04-11 04:24:25 +02:00
|
|
|
const uint64_t file_creation_time;
|
2020-06-17 19:55:42 +02:00
|
|
|
const std::string db_id;
|
|
|
|
const std::string db_session_id;
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 22:49:24 +02:00
|
|
|
// BEGIN for FilterBuildingContext
|
|
|
|
const int level_at_creation;
|
|
|
|
const bool is_bottommost;
|
|
|
|
const TableFileCreationReason reason;
|
|
|
|
// END for FilterBuildingContext
|
|
|
|
|
|
|
|
// XXX: only used by BlockBasedTableBuilder for SstFileWriter. If you
|
|
|
|
// want to skip filters, that should be (for example) null filter_policy
|
|
|
|
// in the table options of the ioptions.table_factory
|
|
|
|
bool skip_filters = false;
|
2021-06-10 20:01:44 +02:00
|
|
|
const uint64_t cur_file_num;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
};
|
|
|
|
|
2014-01-28 06:58:46 +01:00
|
|
|
// TableBuilder provides the interface used to build a Table
|
|
|
|
// (an immutable and sorted map from keys to values).
|
|
|
|
//
|
|
|
|
// Multiple threads can invoke const methods on a TableBuilder without
|
|
|
|
// external synchronization, but if any of the threads may call a
|
|
|
|
// non-const method, all threads accessing the same TableBuilder must use
|
|
|
|
// external synchronization.
|
|
|
|
class TableBuilder {
|
|
|
|
public:
|
|
|
|
// REQUIRES: Either Finish() or Abandon() has been called.
|
|
|
|
virtual ~TableBuilder() {}
|
|
|
|
|
|
|
|
// Add key,value to the table being constructed.
|
|
|
|
// REQUIRES: key is after any previously added key according to comparator.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual void Add(const Slice& key, const Slice& value) = 0;
|
|
|
|
|
|
|
|
// Return non-ok iff some error has been detected.
|
|
|
|
virtual Status status() const = 0;
|
|
|
|
|
Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-28 00:03:05 +01:00
|
|
|
// Return non-ok iff some error happens during IO.
|
|
|
|
virtual IOStatus io_status() const = 0;
|
|
|
|
|
2014-01-28 06:58:46 +01:00
|
|
|
// Finish building the table.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual Status Finish() = 0;
|
|
|
|
|
|
|
|
// Indicate that the contents of this builder should be abandoned.
|
|
|
|
// If the caller is not going to call Finish(), it must call Abandon()
|
|
|
|
// before destroying this builder.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual void Abandon() = 0;
|
|
|
|
|
|
|
|
// Number of calls to Add() so far.
|
|
|
|
virtual uint64_t NumEntries() const = 0;
|
|
|
|
|
2020-04-03 01:13:44 +02:00
|
|
|
// Whether the output file is completely empty. It has neither entries
|
|
|
|
// or tombstones.
|
|
|
|
virtual bool IsEmpty() const {
|
|
|
|
return NumEntries() == 0 && GetTableProperties().num_range_deletions == 0;
|
|
|
|
}
|
|
|
|
|
2014-01-28 06:58:46 +01:00
|
|
|
// Size of the file generated so far. If invoked after a successful
|
|
|
|
// Finish() call, returns the size of the final generated file.
|
|
|
|
virtual uint64_t FileSize() const = 0;
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
2015-05-13 00:53:55 +02:00
|
|
|
|
2020-04-02 01:37:54 +02:00
|
|
|
// Estimated size of the file generated so far. This is used when
|
|
|
|
// FileSize() cannot estimate final SST size, e.g. parallel compression
|
|
|
|
// is enabled.
|
|
|
|
virtual uint64_t EstimatedFileSize() const { return FileSize(); }
|
|
|
|
|
2015-06-04 21:03:40 +02:00
|
|
|
// If the user defined table properties collector suggest the file to
|
|
|
|
// be further compacted.
|
|
|
|
virtual bool NeedCompact() const { return false; }
|
|
|
|
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
2015-05-13 00:53:55 +02:00
|
|
|
// Returns table properties
|
|
|
|
virtual TableProperties GetTableProperties() const = 0;
|
2020-02-11 00:42:46 +01:00
|
|
|
|
|
|
|
// Return file checksum
|
2020-03-30 00:57:02 +02:00
|
|
|
virtual std::string GetFileChecksum() const = 0;
|
2020-02-11 00:42:46 +01:00
|
|
|
|
|
|
|
// Return file checksum function name
|
|
|
|
virtual const char* GetFileChecksumFuncName() const = 0;
|
2014-01-28 06:58:46 +01:00
|
|
|
};
|
|
|
|
|
2020-02-20 21:07:53 +01:00
|
|
|
} // namespace ROCKSDB_NAMESPACE
|