rocksdb/db/version_edit.cc

883 lines
26 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/version_edit.h"
#include "db/blob/blob_index.h"
#include "db/version_set.h"
#include "logging/event_logger.h"
#include "rocksdb/slice.h"
#include "test_util/sync_point.h"
#include "util/coding.h"
#include "util/string_util.h"
namespace ROCKSDB_NAMESPACE {
// The unknown file checksum.
const std::string kUnknownFileChecksum("");
// The unknown sst file checksum function name.
const std::string kUnknownFileChecksumFuncName("Unknown");
namespace {
// Tag numbers for serialized VersionEdit. These numbers are written to
// disk and should not be changed. The number should be forward compatible so
// users can down-grade RocksDB safely. A future Tag is ignored by doing '&'
// between Tag and kTagSafeIgnoreMask field.
enum Tag : uint32_t {
kComparator = 1,
kLogNumber = 2,
kNextFileNumber = 3,
kLastSequence = 4,
kCompactPointer = 5,
kDeletedFile = 6,
kNewFile = 7,
// 8 was used for large value refs
kPrevLogNumber = 9,
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
kMinLogNumberToKeep = 10,
// these are new formats divergent from open source leveldb
kNewFile2 = 100,
kNewFile3 = 102,
kNewFile4 = 103, // 4th (the latest) format version of adding files
kColumnFamily = 200, // specify column family for version edit
kColumnFamilyAdd = 201,
kColumnFamilyDrop = 202,
kMaxColumnFamily = 203,
kInAtomicGroup = 300,
// Mask for an unidentified tag from the future which can be safely ignored.
kTagSafeIgnoreMask = 1 << 13,
// Forward compatible (aka ignorable) records
kDbId,
kBlobFileAddition,
kBlobFileGarbage,
};
enum NewFileCustomTag : uint32_t {
kTerminate = 1, // The end of customized fields
kNeedCompaction = 2,
// Since Manifest is not entirely forward-compatible, we currently encode
// kMinLogNumberToKeep as part of NewFile as a hack. This should be removed
// when manifest becomes forward-comptabile.
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
kMinLogNumberToKeepHack = 3,
kOldestBlobFileNumber = 4,
kOldestAncesterTime = 5,
kFileCreationTime = 6,
kFileChecksum = 7,
kFileChecksumFuncName = 8,
// If this bit for the custom tag is set, opening DB should fail if
// we don't know this field.
kCustomTagNonSafeIgnoreMask = 1 << 6,
// Forward incompatible (aka unignorable) fields
kPathId,
};
} // anonymous namespace
uint64_t PackFileNumberAndPathId(uint64_t number, uint64_t path_id) {
assert(number <= kFileNumberMask);
return number | (path_id * (kFileNumberMask + 1));
}
void FileMetaData::UpdateBoundaries(const Slice& key, const Slice& value,
SequenceNumber seqno,
ValueType value_type) {
if (smallest.size() == 0) {
smallest.DecodeFrom(key);
}
largest.DecodeFrom(key);
fd.smallest_seqno = std::min(fd.smallest_seqno, seqno);
fd.largest_seqno = std::max(fd.largest_seqno, seqno);
#ifndef ROCKSDB_LITE
if (value_type == kTypeBlobIndex) {
BlobIndex blob_index;
const Status s = blob_index.DecodeFrom(value);
if (!s.ok()) {
return;
}
if (blob_index.IsInlined()) {
return;
}
if (blob_index.HasTTL()) {
return;
}
// Paranoid check: this should not happen because BlobDB numbers the blob
// files starting from 1.
if (blob_index.file_number() == kInvalidBlobFileNumber) {
return;
}
if (oldest_blob_file_number == kInvalidBlobFileNumber ||
oldest_blob_file_number > blob_index.file_number()) {
oldest_blob_file_number = blob_index.file_number();
}
}
#else
(void)value;
(void)value_type;
#endif
}
void VersionEdit::Clear() {
max_level_ = 0;
db_id_.clear();
comparator_.clear();
log_number_ = 0;
prev_log_number_ = 0;
next_file_number_ = 0;
max_column_family_ = 0;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
min_log_number_to_keep_ = 0;
last_sequence_ = 0;
has_db_id_ = false;
has_comparator_ = false;
has_log_number_ = false;
has_prev_log_number_ = false;
has_next_file_number_ = false;
has_max_column_family_ = false;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
has_min_log_number_to_keep_ = false;
has_last_sequence_ = false;
deleted_files_.clear();
new_files_.clear();
blob_file_additions_.clear();
blob_file_garbages_.clear();
column_family_ = 0;
is_column_family_add_ = false;
is_column_family_drop_ = false;
column_family_name_.clear();
is_in_atomic_group_ = false;
remaining_entries_ = 0;
}
bool VersionEdit::EncodeTo(std::string* dst) const {
if (has_db_id_) {
PutVarint32(dst, kDbId);
PutLengthPrefixedSlice(dst, db_id_);
}
if (has_comparator_) {
PutVarint32(dst, kComparator);
PutLengthPrefixedSlice(dst, comparator_);
}
if (has_log_number_) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint64(dst, kLogNumber, log_number_);
}
if (has_prev_log_number_) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint64(dst, kPrevLogNumber, prev_log_number_);
}
if (has_next_file_number_) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint64(dst, kNextFileNumber, next_file_number_);
}
if (has_max_column_family_) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint32(dst, kMaxColumnFamily, max_column_family_);
}
if (has_last_sequence_) {
PutVarint32Varint64(dst, kLastSequence, last_sequence_);
}
for (const auto& deleted : deleted_files_) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint32Varint64(dst, kDeletedFile, deleted.first /* level */,
deleted.second /* file number */);
}
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
bool min_log_num_written = false;
for (size_t i = 0; i < new_files_.size(); i++) {
const FileMetaData& f = new_files_[i].second;
if (!f.smallest.Valid() || !f.largest.Valid()) {
return false;
}
PutVarint32(dst, kNewFile4);
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint64(dst, new_files_[i].first /* level */, f.fd.GetNumber());
PutVarint64(dst, f.fd.GetFileSize());
PutLengthPrefixedSlice(dst, f.smallest.Encode());
PutLengthPrefixedSlice(dst, f.largest.Encode());
PutVarint64Varint64(dst, f.fd.smallest_seqno, f.fd.largest_seqno);
// Customized fields' format:
// +-----------------------------+
// | 1st field's tag (varint32) |
// +-----------------------------+
// | 1st field's size (varint32) |
// +-----------------------------+
// | bytes for 1st field |
// | (based on size decoded) |
// +-----------------------------+
// | |
// | ...... |
// | |
// +-----------------------------+
// | last field's size (varint32)|
// +-----------------------------+
// | bytes for last field |
// | (based on size decoded) |
// +-----------------------------+
// | terminating tag (varint32) |
// +-----------------------------+
//
// Customized encoding for fields:
// tag kPathId: 1 byte as path_id
// tag kNeedCompaction:
// now only can take one char value 1 indicating need-compaction
//
PutVarint32(dst, NewFileCustomTag::kOldestAncesterTime);
std::string varint_oldest_ancester_time;
PutVarint64(&varint_oldest_ancester_time, f.oldest_ancester_time);
TEST_SYNC_POINT_CALLBACK("VersionEdit::EncodeTo:VarintOldestAncesterTime",
&varint_oldest_ancester_time);
PutLengthPrefixedSlice(dst, Slice(varint_oldest_ancester_time));
PutVarint32(dst, NewFileCustomTag::kFileCreationTime);
std::string varint_file_creation_time;
PutVarint64(&varint_file_creation_time, f.file_creation_time);
TEST_SYNC_POINT_CALLBACK("VersionEdit::EncodeTo:VarintFileCreationTime",
&varint_file_creation_time);
PutLengthPrefixedSlice(dst, Slice(varint_file_creation_time));
PutVarint32(dst, NewFileCustomTag::kFileChecksum);
PutLengthPrefixedSlice(dst, Slice(f.file_checksum));
PutVarint32(dst, NewFileCustomTag::kFileChecksumFuncName);
PutLengthPrefixedSlice(dst, Slice(f.file_checksum_func_name));
if (f.fd.GetPathId() != 0) {
PutVarint32(dst, NewFileCustomTag::kPathId);
char p = static_cast<char>(f.fd.GetPathId());
PutLengthPrefixedSlice(dst, Slice(&p, 1));
}
if (f.marked_for_compaction) {
PutVarint32(dst, NewFileCustomTag::kNeedCompaction);
char p = static_cast<char>(1);
PutLengthPrefixedSlice(dst, Slice(&p, 1));
}
if (has_min_log_number_to_keep_ && !min_log_num_written) {
PutVarint32(dst, NewFileCustomTag::kMinLogNumberToKeepHack);
std::string varint_log_number;
PutFixed64(&varint_log_number, min_log_number_to_keep_);
PutLengthPrefixedSlice(dst, Slice(varint_log_number));
min_log_num_written = true;
}
if (f.oldest_blob_file_number != kInvalidBlobFileNumber) {
PutVarint32(dst, NewFileCustomTag::kOldestBlobFileNumber);
std::string oldest_blob_file_number;
PutVarint64(&oldest_blob_file_number, f.oldest_blob_file_number);
PutLengthPrefixedSlice(dst, Slice(oldest_blob_file_number));
}
TEST_SYNC_POINT_CALLBACK("VersionEdit::EncodeTo:NewFile4:CustomizeFields",
dst);
PutVarint32(dst, NewFileCustomTag::kTerminate);
}
for (const auto& blob_file_addition : blob_file_additions_) {
PutVarint32(dst, kBlobFileAddition);
blob_file_addition.EncodeTo(dst);
}
for (const auto& blob_file_garbage : blob_file_garbages_) {
PutVarint32(dst, kBlobFileGarbage);
blob_file_garbage.EncodeTo(dst);
}
// 0 is default and does not need to be explicitly written
if (column_family_ != 0) {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 18:57:43 +02:00
PutVarint32Varint32(dst, kColumnFamily, column_family_);
}
if (is_column_family_add_) {
PutVarint32(dst, kColumnFamilyAdd);
PutLengthPrefixedSlice(dst, Slice(column_family_name_));
}
if (is_column_family_drop_) {
PutVarint32(dst, kColumnFamilyDrop);
}
if (is_in_atomic_group_) {
PutVarint32(dst, kInAtomicGroup);
PutVarint32(dst, remaining_entries_);
}
return true;
}
static bool GetInternalKey(Slice* input, InternalKey* dst) {
Slice str;
if (GetLengthPrefixedSlice(input, &str)) {
dst->DecodeFrom(str);
[fix] SIGSEGV when VersionEdit in MANIFEST is corrupted Summary: This was reported by our customers in task #4295529. Cause: * MANIFEST file contains a VersionEdit, which contains file entries whose 'smallest' and 'largest' internal keys are empty. String with zero characters. Root cause of corruption was not investigated. We should report corruption when this happens. However, we currently SIGSEGV. Here's what happens: * VersionEdit encodes zero-strings happily and stores them in smallest and largest InternalKeys. InternalKey::Encode() does assert when `rep_.empty()`, but we don't assert in production environemnts. Also, we should never assert as a result of DB corruption. * As part of our ConsistencyCheck, we call GetLiveFilesMetaData() * GetLiveFilesMetadata() calls `file->largest.user_key().ToString()` * user_key() function does: 1. assert(size > 8) (ooops, no assert), 2. returns `Slice(internal_key.data(), internal_key.size() - 8)` * since `internal_key.size()` is unsigned int, this call translates to `Slice(whatever, 1298471928561892576182756)`. Bazinga. Fix: * VersionEdit checks if InternalKey is valid in `VersionEdit::GetInternalKey()`. If it's invalid, returns corruption. Lessons learned: * Always keep in mind that even if you `assert()`, production code will continue execution even if assert fails. * Never `assert` based on DB corruption. Assert only if the code should guarantee that assert can't fail. Test Plan: dumped offending manifest. Before: assert. Now: corruption Reviewers: dhruba, haobo, sdong Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D18507
2014-05-08 01:52:12 +02:00
return dst->Valid();
} else {
return false;
}
}
bool VersionEdit::GetLevel(Slice* input, int* level, const char** /*msg*/) {
uint32_t v = 0;
if (GetVarint32(input, &v)) {
*level = v;
if (max_level_ < *level) {
max_level_ = *level;
}
return true;
} else {
return false;
}
}
const char* VersionEdit::DecodeNewFile4From(Slice* input) {
const char* msg = nullptr;
int level = 0;
FileMetaData f;
uint64_t number = 0;
uint32_t path_id = 0;
uint64_t file_size = 0;
SequenceNumber smallest_seqno = 0;
SequenceNumber largest_seqno = kMaxSequenceNumber;
if (GetLevel(input, &level, &msg) && GetVarint64(input, &number) &&
GetVarint64(input, &file_size) && GetInternalKey(input, &f.smallest) &&
GetInternalKey(input, &f.largest) &&
GetVarint64(input, &smallest_seqno) &&
GetVarint64(input, &largest_seqno)) {
// See comments in VersionEdit::EncodeTo() for format of customized fields
while (true) {
uint32_t custom_tag = 0;
Slice field;
if (!GetVarint32(input, &custom_tag)) {
return "new-file4 custom field";
}
if (custom_tag == kTerminate) {
break;
}
if (!GetLengthPrefixedSlice(input, &field)) {
return "new-file4 custom field length prefixed slice error";
}
switch (custom_tag) {
case kPathId:
if (field.size() != 1) {
return "path_id field wrong size";
}
path_id = field[0];
if (path_id > 3) {
return "path_id wrong vaue";
}
break;
case kOldestAncesterTime:
if (!GetVarint64(&field, &f.oldest_ancester_time)) {
return "invalid oldest ancester time";
}
break;
case kFileCreationTime:
if (!GetVarint64(&field, &f.file_creation_time)) {
return "invalid file creation time";
}
break;
case kFileChecksum:
f.file_checksum = field.ToString();
break;
case kFileChecksumFuncName:
f.file_checksum_func_name = field.ToString();
break;
case kNeedCompaction:
if (field.size() != 1) {
return "need_compaction field wrong size";
}
f.marked_for_compaction = (field[0] == 1);
break;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
case kMinLogNumberToKeepHack:
// This is a hack to encode kMinLogNumberToKeep in a
// forward-compatible fashion.
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
if (!GetFixed64(&field, &min_log_number_to_keep_)) {
return "deleted log number malformatted";
}
has_min_log_number_to_keep_ = true;
break;
case kOldestBlobFileNumber:
if (!GetVarint64(&field, &f.oldest_blob_file_number)) {
return "invalid oldest blob file number";
}
break;
default:
if ((custom_tag & kCustomTagNonSafeIgnoreMask) != 0) {
// Should not proceed if cannot understand it
return "new-file4 custom field not supported";
}
break;
}
}
} else {
return "new-file4 entry";
}
f.fd =
FileDescriptor(number, path_id, file_size, smallest_seqno, largest_seqno);
new_files_.push_back(std::make_pair(level, f));
return nullptr;
}
Status VersionEdit::DecodeFrom(const Slice& src) {
Clear();
Slice input = src;
const char* msg = nullptr;
uint32_t tag = 0;
// Temporary storage for parsing
int level = 0;
FileMetaData f;
Slice str;
InternalKey key;
while (msg == nullptr && GetVarint32(&input, &tag)) {
switch (tag) {
case kDbId:
if (GetLengthPrefixedSlice(&input, &str)) {
db_id_ = str.ToString();
has_db_id_ = true;
} else {
msg = "db id";
}
break;
case kComparator:
if (GetLengthPrefixedSlice(&input, &str)) {
comparator_ = str.ToString();
has_comparator_ = true;
} else {
msg = "comparator name";
}
break;
case kLogNumber:
if (GetVarint64(&input, &log_number_)) {
has_log_number_ = true;
} else {
msg = "log number";
}
break;
case kPrevLogNumber:
if (GetVarint64(&input, &prev_log_number_)) {
has_prev_log_number_ = true;
} else {
msg = "previous log number";
}
break;
case kNextFileNumber:
if (GetVarint64(&input, &next_file_number_)) {
has_next_file_number_ = true;
} else {
msg = "next file number";
}
break;
case kMaxColumnFamily:
if (GetVarint32(&input, &max_column_family_)) {
has_max_column_family_ = true;
} else {
msg = "max column family";
}
break;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
case kMinLogNumberToKeep:
if (GetVarint64(&input, &min_log_number_to_keep_)) {
has_min_log_number_to_keep_ = true;
} else {
msg = "min log number to kee";
}
break;
case kLastSequence:
if (GetVarint64(&input, &last_sequence_)) {
has_last_sequence_ = true;
} else {
msg = "last sequence number";
}
break;
case kCompactPointer:
if (GetLevel(&input, &level, &msg) &&
GetInternalKey(&input, &key)) {
// we don't use compact pointers anymore,
// but we should not fail if they are still
// in manifest
} else {
if (!msg) {
msg = "compaction pointer";
}
}
break;
case kDeletedFile: {
uint64_t number = 0;
if (GetLevel(&input, &level, &msg) && GetVarint64(&input, &number)) {
deleted_files_.insert(std::make_pair(level, number));
} else {
if (!msg) {
msg = "deleted file";
}
}
break;
}
case kNewFile: {
uint64_t number = 0;
uint64_t file_size = 0;
if (GetLevel(&input, &level, &msg) && GetVarint64(&input, &number) &&
GetVarint64(&input, &file_size) &&
GetInternalKey(&input, &f.smallest) &&
GetInternalKey(&input, &f.largest)) {
f.fd = FileDescriptor(number, 0, file_size);
new_files_.push_back(std::make_pair(level, f));
} else {
if (!msg) {
msg = "new-file entry";
}
}
break;
}
case kNewFile2: {
uint64_t number = 0;
uint64_t file_size = 0;
SequenceNumber smallest_seqno = 0;
SequenceNumber largest_seqno = kMaxSequenceNumber;
if (GetLevel(&input, &level, &msg) && GetVarint64(&input, &number) &&
GetVarint64(&input, &file_size) &&
GetInternalKey(&input, &f.smallest) &&
GetInternalKey(&input, &f.largest) &&
GetVarint64(&input, &smallest_seqno) &&
GetVarint64(&input, &largest_seqno)) {
f.fd = FileDescriptor(number, 0, file_size, smallest_seqno,
largest_seqno);
new_files_.push_back(std::make_pair(level, f));
} else {
if (!msg) {
msg = "new-file2 entry";
}
}
break;
}
case kNewFile3: {
uint64_t number = 0;
uint32_t path_id = 0;
uint64_t file_size = 0;
SequenceNumber smallest_seqno = 0;
SequenceNumber largest_seqno = kMaxSequenceNumber;
if (GetLevel(&input, &level, &msg) && GetVarint64(&input, &number) &&
GetVarint32(&input, &path_id) && GetVarint64(&input, &file_size) &&
GetInternalKey(&input, &f.smallest) &&
GetInternalKey(&input, &f.largest) &&
GetVarint64(&input, &smallest_seqno) &&
GetVarint64(&input, &largest_seqno)) {
f.fd = FileDescriptor(number, path_id, file_size, smallest_seqno,
largest_seqno);
new_files_.push_back(std::make_pair(level, f));
} else {
if (!msg) {
msg = "new-file3 entry";
}
}
break;
}
case kNewFile4: {
msg = DecodeNewFile4From(&input);
break;
}
case kBlobFileAddition: {
BlobFileAddition blob_file_addition;
const Status s = blob_file_addition.DecodeFrom(&input);
if (!s.ok()) {
return s;
}
blob_file_additions_.emplace_back(blob_file_addition);
break;
}
case kBlobFileGarbage: {
BlobFileGarbage blob_file_garbage;
const Status s = blob_file_garbage.DecodeFrom(&input);
if (!s.ok()) {
return s;
}
blob_file_garbages_.emplace_back(blob_file_garbage);
break;
}
case kColumnFamily:
if (!GetVarint32(&input, &column_family_)) {
if (!msg) {
msg = "set column family id";
}
}
break;
case kColumnFamilyAdd:
if (GetLengthPrefixedSlice(&input, &str)) {
is_column_family_add_ = true;
column_family_name_ = str.ToString();
} else {
if (!msg) {
msg = "column family add";
}
}
break;
case kColumnFamilyDrop:
is_column_family_drop_ = true;
break;
case kInAtomicGroup:
is_in_atomic_group_ = true;
if (!GetVarint32(&input, &remaining_entries_)) {
if (!msg) {
msg = "remaining entries";
}
}
break;
default:
if (tag & kTagSafeIgnoreMask) {
// Tag from future which can be safely ignored.
// The next field must be the length of the entry.
uint32_t field_len;
if (!GetVarint32(&input, &field_len) ||
static_cast<size_t>(field_len) > input.size()) {
if (!msg) {
msg = "safely ignoreable tag length error";
}
} else {
input.remove_prefix(static_cast<size_t>(field_len));
}
} else {
msg = "unknown tag";
}
break;
}
}
if (msg == nullptr && !input.empty()) {
msg = "invalid tag";
}
Status result;
if (msg != nullptr) {
result = Status::Corruption("VersionEdit", msg);
}
return result;
}
std::string VersionEdit::DebugString(bool hex_key) const {
std::string r;
r.append("VersionEdit {");
if (has_db_id_) {
r.append("\n DB ID: ");
r.append(db_id_);
}
if (has_comparator_) {
r.append("\n Comparator: ");
r.append(comparator_);
}
if (has_log_number_) {
r.append("\n LogNumber: ");
AppendNumberTo(&r, log_number_);
}
if (has_prev_log_number_) {
r.append("\n PrevLogNumber: ");
AppendNumberTo(&r, prev_log_number_);
}
if (has_next_file_number_) {
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
r.append("\n NextFileNumber: ");
AppendNumberTo(&r, next_file_number_);
}
if (has_max_column_family_) {
r.append("\n MaxColumnFamily: ");
AppendNumberTo(&r, max_column_family_);
}
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-04 00:35:11 +02:00
if (has_min_log_number_to_keep_) {
r.append("\n MinLogNumberToKeep: ");
AppendNumberTo(&r, min_log_number_to_keep_);
}
if (has_last_sequence_) {
r.append("\n LastSeq: ");
AppendNumberTo(&r, last_sequence_);
}
for (const auto& deleted_file : deleted_files_) {
r.append("\n DeleteFile: ");
AppendNumberTo(&r, deleted_file.first);
r.append(" ");
AppendNumberTo(&r, deleted_file.second);
}
for (size_t i = 0; i < new_files_.size(); i++) {
const FileMetaData& f = new_files_[i].second;
r.append("\n AddFile: ");
AppendNumberTo(&r, new_files_[i].first);
r.append(" ");
AppendNumberTo(&r, f.fd.GetNumber());
r.append(" ");
AppendNumberTo(&r, f.fd.GetFileSize());
r.append(" ");
r.append(f.smallest.DebugString(hex_key));
r.append(" .. ");
r.append(f.largest.DebugString(hex_key));
if (f.oldest_blob_file_number != kInvalidBlobFileNumber) {
r.append(" blob_file:");
AppendNumberTo(&r, f.oldest_blob_file_number);
}
r.append(" oldest_ancester_time:");
AppendNumberTo(&r, f.oldest_ancester_time);
r.append(" file_creation_time:");
AppendNumberTo(&r, f.file_creation_time);
r.append(" file_checksum:");
r.append(f.file_checksum);
r.append(" file_checksum_func_name: ");
r.append(f.file_checksum_func_name);
}
for (const auto& blob_file_addition : blob_file_additions_) {
r.append("\n BlobFileAddition: ");
r.append(blob_file_addition.DebugString());
}
for (const auto& blob_file_garbage : blob_file_garbages_) {
r.append("\n BlobFileGarbage: ");
r.append(blob_file_garbage.DebugString());
}
r.append("\n ColumnFamily: ");
AppendNumberTo(&r, column_family_);
if (is_column_family_add_) {
r.append("\n ColumnFamilyAdd: ");
r.append(column_family_name_);
}
if (is_column_family_drop_) {
r.append("\n ColumnFamilyDrop");
}
if (is_in_atomic_group_) {
r.append("\n AtomicGroup: ");
AppendNumberTo(&r, remaining_entries_);
r.append(" entries remains");
}
r.append("\n}\n");
return r;
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
std::string VersionEdit::DebugJSON(int edit_num, bool hex_key) const {
JSONWriter jw;
jw << "EditNumber" << edit_num;
if (has_db_id_) {
jw << "DB ID" << db_id_;
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
if (has_comparator_) {
jw << "Comparator" << comparator_;
}
if (has_log_number_) {
jw << "LogNumber" << log_number_;
}
if (has_prev_log_number_) {
jw << "PrevLogNumber" << prev_log_number_;
}
if (has_next_file_number_) {
jw << "NextFileNumber" << next_file_number_;
}
if (has_max_column_family_) {
jw << "MaxColumnFamily" << max_column_family_;
}
if (has_min_log_number_to_keep_) {
jw << "MinLogNumberToKeep" << min_log_number_to_keep_;
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
if (has_last_sequence_) {
jw << "LastSeq" << last_sequence_;
}
if (!deleted_files_.empty()) {
jw << "DeletedFiles";
jw.StartArray();
for (const auto& deleted_file : deleted_files_) {
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
jw.StartArrayedObject();
jw << "Level" << deleted_file.first;
jw << "FileNumber" << deleted_file.second;
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
jw.EndArrayedObject();
}
jw.EndArray();
}
if (!new_files_.empty()) {
jw << "AddedFiles";
jw.StartArray();
for (size_t i = 0; i < new_files_.size(); i++) {
jw.StartArrayedObject();
jw << "Level" << new_files_[i].first;
const FileMetaData& f = new_files_[i].second;
jw << "FileNumber" << f.fd.GetNumber();
jw << "FileSize" << f.fd.GetFileSize();
jw << "SmallestIKey" << f.smallest.DebugString(hex_key);
jw << "LargestIKey" << f.largest.DebugString(hex_key);
if (f.oldest_blob_file_number != kInvalidBlobFileNumber) {
jw << "OldestBlobFile" << f.oldest_blob_file_number;
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
jw.EndArrayedObject();
}
jw.EndArray();
}
if (!blob_file_additions_.empty()) {
jw << "BlobFileAdditions";
jw.StartArray();
for (const auto& blob_file_addition : blob_file_additions_) {
jw.StartArrayedObject();
jw << blob_file_addition;
jw.EndArrayedObject();
}
jw.EndArray();
}
if (!blob_file_garbages_.empty()) {
jw << "BlobFileGarbages";
jw.StartArray();
for (const auto& blob_file_garbage : blob_file_garbages_) {
jw.StartArrayedObject();
jw << blob_file_garbage;
jw.EndArrayedObject();
}
jw.EndArray();
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
jw << "ColumnFamily" << column_family_;
if (is_column_family_add_) {
jw << "ColumnFamilyAdd" << column_family_name_;
}
if (is_column_family_drop_) {
jw << "ColumnFamilyDrop" << column_family_name_;
}
if (is_in_atomic_group_) {
jw << "AtomicGroup" << remaining_entries_;
}
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 19:07:40 +02:00
jw.EndObject();
return jw.Get();
}
} // namespace ROCKSDB_NAMESPACE