rocksdb/db/repair.cc

682 lines
24 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
//
// Repairer does best effort recovery to recover as much data as possible after
// a disaster without compromising consistency. It does not guarantee bringing
// the database to a time consistent state.
//
// Repair process is broken into 4 phases:
// (a) Find files
// (b) Convert logs to tables
// (c) Extract metadata
// (d) Write Descriptor
//
// (a) Find files
//
// The repairer goes through all the files in the directory, and classifies them
// based on their file name. Any file that cannot be identified by name will be
// ignored.
//
// (b) Convert logs to table
//
// Every log file that is active is replayed. All sections of the file where the
// checksum does not match is skipped over. We intentionally give preference to
// data consistency.
//
// (c) Extract metadata
//
// We scan every table to compute
// (1) smallest/largest for the table
// (2) largest sequence number in the table
// (3) oldest blob file referred to by the table (if applicable)
//
// If we are unable to scan the file, then we ignore the table.
//
// (d) Write Descriptor
//
// We generate descriptor contents:
// - log number is set to zero
// - next-file-number is set to 1 + largest file number we found
// - last-sequence-number is set to largest sequence# found across
// all tables (see 2c)
// - compaction pointers are cleared
// - every table file is added at level 0
//
// Possible optimization 1:
// (a) Compute total size and use to pick appropriate max-level M
// (b) Sort tables by largest sequence# in the table
// (c) For each table: if it overlaps earlier table, place in level-0,
// else place in level-M.
// (d) We can provide options for time consistent recovery and unsafe recovery
// (ignore checksum failure when applicable)
// Possible optimization 2:
// Store per-table metadata (smallest, largest, largest-seq#, ...)
// in the table's meta section to speed up ScanTable.
#ifndef ROCKSDB_LITE
#include <cinttypes>
#include "db/builder.h"
#include "db/db_impl/db_impl.h"
#include "db/dbformat.h"
#include "db/log_reader.h"
#include "db/log_writer.h"
#include "db/memtable.h"
#include "db/table_cache.h"
#include "db/version_edit.h"
#include "db/write_batch_internal.h"
#include "file/filename.h"
#include "file/writable_file_writer.h"
#include "options/cf_options.h"
#include "rocksdb/comparator.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/options.h"
#include "rocksdb/write_buffer_manager.h"
#include "table/scoped_arena_iterator.h"
#include "util/string_util.h"
namespace rocksdb {
namespace {
class Repairer {
public:
Repairer(const std::string& dbname, const DBOptions& db_options,
const std::vector<ColumnFamilyDescriptor>& column_families,
const ColumnFamilyOptions& default_cf_opts,
const ColumnFamilyOptions& unknown_cf_opts, bool create_unknown_cfs)
: dbname_(dbname),
env_(db_options.env),
env_options_(),
db_options_(SanitizeOptions(dbname_, db_options)),
immutable_db_options_(ImmutableDBOptions(db_options_)),
icmp_(default_cf_opts.comparator),
default_cf_opts_(
SanitizeOptions(immutable_db_options_, default_cf_opts)),
default_cf_iopts_(
ImmutableCFOptions(immutable_db_options_, default_cf_opts_)),
unknown_cf_opts_(
SanitizeOptions(immutable_db_options_, unknown_cf_opts)),
create_unknown_cfs_(create_unknown_cfs),
raw_table_cache_(
// TableCache can be small since we expect each table to be opened
// once.
NewLRUCache(10, db_options_.table_cache_numshardbits)),
table_cache_(new TableCache(default_cf_iopts_, env_options_,
raw_table_cache_.get(),
/*block_cache_tracer=*/nullptr)),
wb_(db_options_.db_write_buffer_size),
wc_(db_options_.delayed_write_rate),
vset_(dbname_, &immutable_db_options_, env_options_,
raw_table_cache_.get(), &wb_, &wc_,
/*block_cache_tracer=*/nullptr),
next_file_number_(1),
db_lock_(nullptr) {
for (const auto& cfd : column_families) {
cf_name_to_opts_[cfd.name] = cfd.options;
}
}
const ColumnFamilyOptions* GetColumnFamilyOptions(
const std::string& cf_name) {
if (cf_name_to_opts_.find(cf_name) == cf_name_to_opts_.end()) {
if (create_unknown_cfs_) {
return &unknown_cf_opts_;
}
return nullptr;
}
return &cf_name_to_opts_[cf_name];
}
// Adds a column family to the VersionSet with cf_options_ and updates
// manifest.
Status AddColumnFamily(const std::string& cf_name, uint32_t cf_id) {
const auto* cf_opts = GetColumnFamilyOptions(cf_name);
if (cf_opts == nullptr) {
return Status::Corruption("Encountered unknown column family with name=" +
cf_name + ", id=" + ToString(cf_id));
}
Options opts(db_options_, *cf_opts);
MutableCFOptions mut_cf_opts(opts);
VersionEdit edit;
edit.SetComparatorName(opts.comparator->Name());
edit.SetLogNumber(0);
edit.SetColumnFamily(cf_id);
ColumnFamilyData* cfd;
cfd = nullptr;
edit.AddColumnFamily(cf_name);
mutex_.Lock();
Status status = vset_.LogAndApply(cfd, mut_cf_opts, &edit, &mutex_,
nullptr /* db_directory */,
false /* new_descriptor_log */, cf_opts);
mutex_.Unlock();
return status;
}
~Repairer() {
if (db_lock_ != nullptr) {
env_->UnlockFile(db_lock_);
}
delete table_cache_;
}
Status Run() {
Status status = env_->LockFile(LockFileName(dbname_), &db_lock_);
if (!status.ok()) {
return status;
}
status = FindFiles();
if (status.ok()) {
// Discard older manifests and start a fresh one
for (size_t i = 0; i < manifests_.size(); i++) {
ArchiveFile(dbname_ + "/" + manifests_[i]);
}
// Just create a DBImpl temporarily so we can reuse NewDB()
DBImpl* db_impl = new DBImpl(db_options_, dbname_);
status = db_impl->NewDB();
delete db_impl;
}
if (status.ok()) {
// Recover using the fresh manifest created by NewDB()
status =
vset_.Recover({{kDefaultColumnFamilyName, default_cf_opts_}}, false);
}
if (status.ok()) {
// Need to scan existing SST files first so the column families are
// created before we process WAL files
ExtractMetaData();
// ExtractMetaData() uses table_fds_ to know which SST files' metadata to
// extract -- we need to clear it here since metadata for existing SST
// files has been extracted already
table_fds_.clear();
ConvertLogFilesToTables();
ExtractMetaData();
status = AddTables();
}
if (status.ok()) {
uint64_t bytes = 0;
for (size_t i = 0; i < tables_.size(); i++) {
bytes += tables_[i].meta.fd.GetFileSize();
}
ROCKS_LOG_WARN(db_options_.info_log,
"**** Repaired rocksdb %s; "
"recovered %" ROCKSDB_PRIszt " files; %" PRIu64
" bytes. "
"Some data may have been lost. "
"****",
dbname_.c_str(), tables_.size(), bytes);
}
return status;
}
private:
struct TableInfo {
FileMetaData meta;
uint32_t column_family_id;
std::string column_family_name;
};
std::string const dbname_;
Env* const env_;
const EnvOptions env_options_;
const DBOptions db_options_;
const ImmutableDBOptions immutable_db_options_;
const InternalKeyComparator icmp_;
const ColumnFamilyOptions default_cf_opts_;
const ImmutableCFOptions default_cf_iopts_; // table_cache_ holds reference
const ColumnFamilyOptions unknown_cf_opts_;
const bool create_unknown_cfs_;
std::shared_ptr<Cache> raw_table_cache_;
TableCache* table_cache_;
WriteBufferManager wb_;
WriteController wc_;
VersionSet vset_;
std::unordered_map<std::string, ColumnFamilyOptions> cf_name_to_opts_;
InstrumentedMutex mutex_;
std::vector<std::string> manifests_;
std::vector<FileDescriptor> table_fds_;
std::vector<uint64_t> logs_;
std::vector<TableInfo> tables_;
uint64_t next_file_number_;
// Lock over the persistent DB state. Non-nullptr iff successfully
// acquired.
FileLock* db_lock_;
Status FindFiles() {
std::vector<std::string> filenames;
bool found_file = false;
std::vector<std::string> to_search_paths;
for (size_t path_id = 0; path_id < db_options_.db_paths.size(); path_id++) {
to_search_paths.push_back(db_options_.db_paths[path_id].path);
}
// search wal_dir if user uses a customize wal_dir
bool same = false;
Status status = env_->AreFilesSame(db_options_.wal_dir, dbname_, &same);
if (status.IsNotSupported()) {
same = db_options_.wal_dir == dbname_;
status = Status::OK();
} else if (!status.ok()) {
return status;
}
if (!same) {
to_search_paths.push_back(db_options_.wal_dir);
}
for (size_t path_id = 0; path_id < to_search_paths.size(); path_id++) {
status = env_->GetChildren(to_search_paths[path_id], &filenames);
if (!status.ok()) {
return status;
}
if (!filenames.empty()) {
found_file = true;
}
uint64_t number;
FileType type;
for (size_t i = 0; i < filenames.size(); i++) {
if (ParseFileName(filenames[i], &number, &type)) {
if (type == kDescriptorFile) {
manifests_.push_back(filenames[i]);
} else {
if (number + 1 > next_file_number_) {
next_file_number_ = number + 1;
}
if (type == kLogFile) {
logs_.push_back(number);
} else if (type == kTableFile) {
table_fds_.emplace_back(number, static_cast<uint32_t>(path_id),
0);
} else {
// Ignore other files
}
}
}
}
}
if (!found_file) {
return Status::Corruption(dbname_, "repair found no files");
}
return Status::OK();
}
void ConvertLogFilesToTables() {
for (size_t i = 0; i < logs_.size(); i++) {
// we should use LogFileName(wal_dir, logs_[i]) here. user might uses wal_dir option.
std::string logname = LogFileName(db_options_.wal_dir, logs_[i]);
Status status = ConvertLogToTable(logs_[i]);
if (!status.ok()) {
ROCKS_LOG_WARN(db_options_.info_log,
"Log #%" PRIu64 ": ignoring conversion error: %s",
logs_[i], status.ToString().c_str());
}
ArchiveFile(logname);
}
}
Status ConvertLogToTable(uint64_t log) {
struct LogReporter : public log::Reader::Reporter {
Env* env;
std::shared_ptr<Logger> info_log;
uint64_t lognum;
void Corruption(size_t bytes, const Status& s) override {
// We print error messages for corruption, but continue repairing.
ROCKS_LOG_ERROR(info_log, "Log #%" PRIu64 ": dropping %d bytes; %s",
lognum, static_cast<int>(bytes), s.ToString().c_str());
}
};
// Open the log file
std::string logname = LogFileName(db_options_.wal_dir, log);
std::unique_ptr<SequentialFile> lfile;
Status status = env_->NewSequentialFile(
logname, &lfile, env_->OptimizeForLogRead(env_options_));
if (!status.ok()) {
return status;
}
std::unique_ptr<SequentialFileReader> lfile_reader(
new SequentialFileReader(std::move(lfile), logname));
// Create the log reader.
LogReporter reporter;
reporter.env = env_;
reporter.info_log = db_options_.info_log;
reporter.lognum = log;
// We intentionally make log::Reader do checksumming so that
// corruptions cause entire commits to be skipped instead of
// propagating bad information (like overly large sequence
// numbers).
log::Reader reader(db_options_.info_log, std::move(lfile_reader), &reporter,
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
2019-03-27 00:41:31 +01:00
true /*enable checksum*/, log);
// Initialize per-column family memtables
for (auto* cfd : *vset_.GetColumnFamilySet()) {
cfd->CreateNewMemtable(*cfd->GetLatestMutableCFOptions(),
kMaxSequenceNumber);
}
auto cf_mems = new ColumnFamilyMemTablesImpl(vset_.GetColumnFamilySet());
// Read all the records and add to a memtable
std::string scratch;
Slice record;
WriteBatch batch;
int counter = 0;
while (reader.ReadRecord(&record, &scratch)) {
if (record.size() < WriteBatchInternal::kHeader) {
reporter.Corruption(
record.size(), Status::Corruption("log record too small"));
continue;
}
WriteBatchInternal::SetContents(&batch, record);
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 22:54:09 +02:00
status =
WriteBatchInternal::InsertInto(&batch, cf_mems, nullptr, nullptr);
if (status.ok()) {
counter += WriteBatchInternal::Count(&batch);
} else {
ROCKS_LOG_WARN(db_options_.info_log, "Log #%" PRIu64 ": ignoring %s",
log, status.ToString().c_str());
status = Status::OK(); // Keep going with rest of file
}
}
// Dump a table for each column family with entries in this log file.
for (auto* cfd : *vset_.GetColumnFamilySet()) {
// Do not record a version edit for this conversion to a Table
// since ExtractMetaData() will also generate edits.
MemTable* mem = cfd->mem();
if (mem->IsEmpty()) {
continue;
}
FileMetaData meta;
meta.fd = FileDescriptor(next_file_number_++, 0, 0);
ReadOptions ro;
ro.total_order_seek = true;
Arena arena;
ScopedArenaIterator iter(mem->NewIterator(ro, &arena));
int64_t _current_time = 0;
status = env_->GetCurrentTime(&_current_time); // ignore error
FIFO Compaction with TTL Summary: Introducing FIFO compactions with TTL. FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size. To address that request: - Added a new TTL option to FIFO compaction options. - Updated FIFO compaction score to take TTL into consideration. - Added a new table property, creation_time, to keep track of when the SST file is created. - Creation_time is set as below: - On Flush: Set to the time of flush. - On Compaction: Set to the max creation_time of all the files involved in the compaction. - On Repair and Recovery: Set to the time of repair/recovery. - Old files created prior to this code change will have a creation_time of 0. - FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day. - FIFO compaction will fall back to the prior way of deleting files based on size if: - the creation_time of all files involved in compaction is 0. - the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted. This feature is not supported if max_open_files != -1 or with table formats other than Block-based. **Test Plan:** Added tests. **Benchmark results:** Base: FIFO with max size: 100MB :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found) ``` With TTL (a low one for testing) :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20 readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found) ``` Example Log lines: ``` 2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion 2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files ... 2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK 2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40} ``` SST Files remaining in the dbbench dir, after db_bench execution completed: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst -rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst -rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst -rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst ``` Closes https://github.com/facebook/rocksdb/pull/2480 Differential Revision: D5305116 Pulled By: sagar0 fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
2017-06-28 02:02:20 +02:00
const uint64_t current_time = static_cast<uint64_t>(_current_time);
SnapshotChecker* snapshot_checker = DisableGCSnapshotChecker::Instance();
auto write_hint = cfd->CalculateSSTWriteHint(0);
std::vector<std::unique_ptr<FragmentedRangeTombstoneIterator>>
range_del_iters;
auto range_del_iter =
mem->NewRangeTombstoneIterator(ro, kMaxSequenceNumber);
if (range_del_iter != nullptr) {
range_del_iters.emplace_back(range_del_iter);
}
status = BuildTable(
dbname_, env_, *cfd->ioptions(), *cfd->GetLatestMutableCFOptions(),
env_options_, table_cache_, iter.get(), std::move(range_del_iters),
&meta, cfd->internal_comparator(),
cfd->int_tbl_prop_collector_factories(), cfd->GetID(), cfd->GetName(),
{}, kMaxSequenceNumber, snapshot_checker, kNoCompression,
0 /* sample_for_compression */, CompressionOptions(), false,
nullptr /* internal_stats */, TableFileCreationReason::kRecovery,
nullptr /* event_logger */, 0 /* job_id */, Env::IO_HIGH,
nullptr /* table_properties */, -1 /* level */, current_time,
write_hint);
ROCKS_LOG_INFO(db_options_.info_log,
"Log #%" PRIu64 ": %d ops saved to Table #%" PRIu64 " %s",
log, counter, meta.fd.GetNumber(),
status.ToString().c_str());
if (status.ok()) {
if (meta.fd.GetFileSize() > 0) {
table_fds_.push_back(meta.fd);
}
} else {
break;
}
}
delete cf_mems;
return status;
}
void ExtractMetaData() {
for (size_t i = 0; i < table_fds_.size(); i++) {
TableInfo t;
t.meta.fd = table_fds_[i];
Status status = ScanTable(&t);
if (!status.ok()) {
std::string fname = TableFileName(
db_options_.db_paths, t.meta.fd.GetNumber(), t.meta.fd.GetPathId());
char file_num_buf[kFormatFileNumberBufSize];
FormatFileNumber(t.meta.fd.GetNumber(), t.meta.fd.GetPathId(),
file_num_buf, sizeof(file_num_buf));
ROCKS_LOG_WARN(db_options_.info_log, "Table #%s: ignoring %s",
file_num_buf, status.ToString().c_str());
ArchiveFile(fname);
} else {
tables_.push_back(t);
}
}
}
Status ScanTable(TableInfo* t) {
std::string fname = TableFileName(
db_options_.db_paths, t->meta.fd.GetNumber(), t->meta.fd.GetPathId());
int counter = 0;
uint64_t file_size;
Status status = env_->GetFileSize(fname, &file_size);
t->meta.fd = FileDescriptor(t->meta.fd.GetNumber(), t->meta.fd.GetPathId(),
file_size);
std::shared_ptr<const TableProperties> props;
if (status.ok()) {
status = table_cache_->GetTableProperties(env_options_, icmp_, t->meta.fd,
&props);
}
if (status.ok()) {
t->column_family_id = static_cast<uint32_t>(props->column_family_id);
if (t->column_family_id ==
TablePropertiesCollectorFactory::Context::kUnknownColumnFamily) {
ROCKS_LOG_WARN(
db_options_.info_log,
"Table #%" PRIu64
": column family unknown (probably due to legacy format); "
"adding to default column family id 0.",
t->meta.fd.GetNumber());
t->column_family_id = 0;
}
if (vset_.GetColumnFamilySet()->GetColumnFamily(t->column_family_id) ==
nullptr) {
status =
AddColumnFamily(props->column_family_name, t->column_family_id);
}
t->meta.oldest_ancester_time = props->creation_time;
}
ColumnFamilyData* cfd = nullptr;
if (status.ok()) {
cfd = vset_.GetColumnFamilySet()->GetColumnFamily(t->column_family_id);
if (cfd->GetName() != props->column_family_name) {
ROCKS_LOG_ERROR(
db_options_.info_log,
"Table #%" PRIu64
": inconsistent column family name '%s'; expected '%s' for column "
"family id %" PRIu32 ".",
t->meta.fd.GetNumber(), props->column_family_name.c_str(),
cfd->GetName().c_str(), t->column_family_id);
status = Status::Corruption(dbname_, "inconsistent column family name");
}
}
if (status.ok()) {
ReadOptions ropts;
ropts.total_order_seek = true;
InternalIterator* iter = table_cache_->NewIterator(
ropts, env_options_, cfd->internal_comparator(), t->meta,
nullptr /* range_del_agg */,
cfd->GetLatestMutableCFOptions()->prefix_extractor.get(),
/*table_reader_ptr=*/nullptr, /*file_read_hist=*/nullptr,
TableReaderCaller::kRepair, /*arena=*/nullptr, /*skip_filters=*/false,
/*level=*/-1, /*smallest_compaction_key=*/nullptr,
/*largest_compaction_key=*/nullptr);
ParsedInternalKey parsed;
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
Slice key = iter->key();
if (!ParseInternalKey(key, &parsed)) {
ROCKS_LOG_ERROR(db_options_.info_log,
"Table #%" PRIu64 ": unparsable key %s",
t->meta.fd.GetNumber(), EscapeString(key).c_str());
continue;
}
counter++;
t->meta.UpdateBoundaries(key, iter->value(), parsed.sequence,
parsed.type);
}
if (!iter->status().ok()) {
status = iter->status();
}
delete iter;
ROCKS_LOG_INFO(db_options_.info_log, "Table #%" PRIu64 ": %d entries %s",
t->meta.fd.GetNumber(), counter,
status.ToString().c_str());
}
return status;
}
Status AddTables() {
std::unordered_map<uint32_t, std::vector<const TableInfo*>> cf_id_to_tables;
SequenceNumber max_sequence = 0;
for (size_t i = 0; i < tables_.size(); i++) {
cf_id_to_tables[tables_[i].column_family_id].push_back(&tables_[i]);
if (max_sequence < tables_[i].meta.fd.largest_seqno) {
max_sequence = tables_[i].meta.fd.largest_seqno;
}
}
vset_.SetLastAllocatedSequence(max_sequence);
vset_.SetLastPublishedSequence(max_sequence);
vset_.SetLastSequence(max_sequence);
for (const auto& cf_id_and_tables : cf_id_to_tables) {
auto* cfd =
vset_.GetColumnFamilySet()->GetColumnFamily(cf_id_and_tables.first);
VersionEdit edit;
edit.SetComparatorName(cfd->user_comparator()->Name());
edit.SetLogNumber(0);
edit.SetNextFile(next_file_number_);
edit.SetColumnFamily(cfd->GetID());
// TODO(opt): separate out into multiple levels
for (const auto* table : cf_id_and_tables.second) {
edit.AddFile(
0, table->meta.fd.GetNumber(), table->meta.fd.GetPathId(),
table->meta.fd.GetFileSize(), table->meta.smallest,
table->meta.largest, table->meta.fd.smallest_seqno,
table->meta.fd.largest_seqno, table->meta.marked_for_compaction,
table->meta.oldest_blob_file_number,
table->meta.oldest_ancester_time, table->meta.file_creation_time);
}
assert(next_file_number_ > 0);
vset_.MarkFileNumberUsed(next_file_number_ - 1);
mutex_.Lock();
Status status = vset_.LogAndApply(
cfd, *cfd->GetLatestMutableCFOptions(), &edit, &mutex_,
nullptr /* db_directory */, false /* new_descriptor_log */);
mutex_.Unlock();
if (!status.ok()) {
return status;
}
}
return Status::OK();
}
void ArchiveFile(const std::string& fname) {
// Move into another directory. E.g., for
// dir/foo
// rename to
// dir/lost/foo
const char* slash = strrchr(fname.c_str(), '/');
std::string new_dir;
if (slash != nullptr) {
new_dir.assign(fname.data(), slash - fname.data());
}
new_dir.append("/lost");
env_->CreateDir(new_dir); // Ignore error
std::string new_file = new_dir;
new_file.append("/");
new_file.append((slash == nullptr) ? fname.c_str() : slash + 1);
Status s = env_->RenameFile(fname, new_file);
ROCKS_LOG_INFO(db_options_.info_log, "Archiving %s: %s\n", fname.c_str(),
s.ToString().c_str());
}
};
Status GetDefaultCFOptions(
const std::vector<ColumnFamilyDescriptor>& column_families,
ColumnFamilyOptions* res) {
assert(res != nullptr);
auto iter = std::find_if(column_families.begin(), column_families.end(),
[](const ColumnFamilyDescriptor& cfd) {
return cfd.name == kDefaultColumnFamilyName;
});
if (iter == column_families.end()) {
return Status::InvalidArgument(
"column_families", "Must contain entry for default column family");
}
*res = iter->options;
return Status::OK();
}
} // anonymous namespace
Status RepairDB(const std::string& dbname, const DBOptions& db_options,
const std::vector<ColumnFamilyDescriptor>& column_families
) {
ColumnFamilyOptions default_cf_opts;
Status status = GetDefaultCFOptions(column_families, &default_cf_opts);
if (status.ok()) {
Repairer repairer(dbname, db_options, column_families,
default_cf_opts,
ColumnFamilyOptions() /* unknown_cf_opts */,
false /* create_unknown_cfs */);
status = repairer.Run();
}
return status;
}
Status RepairDB(const std::string& dbname, const DBOptions& db_options,
const std::vector<ColumnFamilyDescriptor>& column_families,
const ColumnFamilyOptions& unknown_cf_opts) {
ColumnFamilyOptions default_cf_opts;
Status status = GetDefaultCFOptions(column_families, &default_cf_opts);
if (status.ok()) {
Repairer repairer(dbname, db_options,
column_families, default_cf_opts,
unknown_cf_opts, true /* create_unknown_cfs */);
status = repairer.Run();
}
return status;
}
Status RepairDB(const std::string& dbname, const Options& options) {
DBOptions db_options(options);
ColumnFamilyOptions cf_options(options);
Repairer repairer(dbname, db_options,
{}, cf_options /* default_cf_opts */,
cf_options /* unknown_cf_opts */,
true /* create_unknown_cfs */);
return repairer.Run();
}
} // namespace rocksdb
#endif // ROCKSDB_LITE