2016-02-10 00:12:00 +01:00
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
2017-07-16 01:03:42 +02:00
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
2014-09-29 20:09:09 +02:00
|
|
|
|
|
|
|
#pragma once
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
2019-04-11 23:24:09 +02:00
|
|
|
#include <db/dbformat.h>
|
2019-05-31 02:39:43 +02:00
|
|
|
#include <string>
|
2014-09-29 20:09:09 +02:00
|
|
|
#include "db/merge_context.h"
|
2017-09-11 17:58:52 +02:00
|
|
|
#include "db/read_callback.h"
|
2015-03-03 19:59:36 +01:00
|
|
|
#include "rocksdb/env.h"
|
2017-12-13 06:06:26 +01:00
|
|
|
#include "rocksdb/statistics.h"
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
#include "rocksdb/types.h"
|
2019-05-30 23:47:29 +02:00
|
|
|
#include "table/block_based/block.h"
|
2014-09-29 20:09:09 +02:00
|
|
|
|
|
|
|
namespace rocksdb {
|
|
|
|
class MergeContext;
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 18:49:03 +02:00
|
|
|
class PinnedIteratorsManager;
|
2014-09-29 20:09:09 +02:00
|
|
|
|
2019-05-24 22:24:52 +02:00
|
|
|
// Data structure for accumulating statistics during a point lookup. At the
|
|
|
|
// end of the point lookup, the corresponding ticker stats are updated. This
|
|
|
|
// avoids the overhead of frequent ticker stats updates
|
2018-07-21 01:43:13 +02:00
|
|
|
struct GetContextStats {
|
|
|
|
uint64_t num_cache_hit = 0;
|
|
|
|
uint64_t num_cache_index_hit = 0;
|
|
|
|
uint64_t num_cache_data_hit = 0;
|
|
|
|
uint64_t num_cache_filter_hit = 0;
|
2019-01-24 03:11:08 +01:00
|
|
|
uint64_t num_cache_compression_dict_hit = 0;
|
2018-07-21 01:43:13 +02:00
|
|
|
uint64_t num_cache_index_miss = 0;
|
|
|
|
uint64_t num_cache_filter_miss = 0;
|
|
|
|
uint64_t num_cache_data_miss = 0;
|
2019-01-24 03:11:08 +01:00
|
|
|
uint64_t num_cache_compression_dict_miss = 0;
|
2018-07-21 01:43:13 +02:00
|
|
|
uint64_t num_cache_bytes_read = 0;
|
|
|
|
uint64_t num_cache_miss = 0;
|
|
|
|
uint64_t num_cache_add = 0;
|
|
|
|
uint64_t num_cache_bytes_write = 0;
|
|
|
|
uint64_t num_cache_index_add = 0;
|
|
|
|
uint64_t num_cache_index_bytes_insert = 0;
|
|
|
|
uint64_t num_cache_data_add = 0;
|
|
|
|
uint64_t num_cache_data_bytes_insert = 0;
|
|
|
|
uint64_t num_cache_filter_add = 0;
|
|
|
|
uint64_t num_cache_filter_bytes_insert = 0;
|
2019-01-24 03:11:08 +01:00
|
|
|
uint64_t num_cache_compression_dict_add = 0;
|
|
|
|
uint64_t num_cache_compression_dict_bytes_insert = 0;
|
2018-07-21 01:43:13 +02:00
|
|
|
};
|
|
|
|
|
2019-05-24 22:24:52 +02:00
|
|
|
// A class to hold context about a point lookup, such as pointer to value
|
|
|
|
// slice, key, merge context etc, as well as the current state of the
|
|
|
|
// lookup. Any user using GetContext to track the lookup result must call
|
|
|
|
// SaveValue() whenever the internal key is found. This can happen
|
|
|
|
// repeatedly in case of merge operands. In case the key may exist with
|
|
|
|
// high probability, but IO is required to confirm and the user doesn't allow
|
|
|
|
// it, MarkKeyMayExist() must be called instead of SaveValue().
|
2014-09-29 20:09:09 +02:00
|
|
|
class GetContext {
|
|
|
|
public:
|
2019-05-24 22:24:52 +02:00
|
|
|
// Current state of the point lookup. All except kNotFound and kMerge are
|
|
|
|
// terminal states
|
2014-09-29 20:09:09 +02:00
|
|
|
enum GetState {
|
|
|
|
kNotFound,
|
|
|
|
kFound,
|
|
|
|
kDeleted,
|
|
|
|
kCorrupt,
|
2017-10-03 18:08:07 +02:00
|
|
|
kMerge, // saver contains the current merge result (the operands)
|
|
|
|
kBlobIndex,
|
2014-09-29 20:09:09 +02:00
|
|
|
};
|
2018-07-21 01:43:13 +02:00
|
|
|
GetContextStats get_context_stats_;
|
2014-09-29 20:09:09 +02:00
|
|
|
|
2019-05-24 22:24:52 +02:00
|
|
|
// Constructor
|
|
|
|
// @param value_found If non-nullptr, set to false if key may be present
|
|
|
|
// but we can't be certain because we cannot do IO
|
|
|
|
// @param max_covering_tombstone_seq Pointer to highest sequence number of
|
|
|
|
// range deletion covering the key. When an internal key
|
|
|
|
// is found with smaller sequence number, the lookup
|
|
|
|
// terminates
|
|
|
|
// @param seq If non-nullptr, the sequence number of the found key will be
|
|
|
|
// saved here
|
|
|
|
// @param callback Pointer to ReadCallback to perform additional checks
|
|
|
|
// for visibility of a key
|
|
|
|
// @param is_blob_index If non-nullptr, will be used to indicate if a found
|
|
|
|
// key is of type blob index
|
2014-09-29 20:09:09 +02:00
|
|
|
GetContext(const Comparator* ucmp, const MergeOperator* merge_operator,
|
2015-03-03 19:59:36 +01:00
|
|
|
Logger* logger, Statistics* statistics, GetState init_state,
|
2017-03-13 19:44:50 +01:00
|
|
|
const Slice& user_key, PinnableSlice* value, bool* value_found,
|
Use only "local" range tombstones during Get (#4449)
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 21:29:29 +02:00
|
|
|
MergeContext* merge_context,
|
|
|
|
SequenceNumber* max_covering_tombstone_seq, Env* env,
|
|
|
|
SequenceNumber* seq = nullptr,
|
2017-09-11 17:58:52 +02:00
|
|
|
PinnedIteratorsManager* _pinned_iters_mgr = nullptr,
|
2019-07-04 03:45:36 +02:00
|
|
|
ReadCallback* callback = nullptr, bool* is_blob_index = nullptr,
|
2019-07-16 23:13:50 +02:00
|
|
|
uint64_t tracing_get_id = 0, bool do_merge = true);
|
2014-09-29 20:09:09 +02:00
|
|
|
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
2019-04-11 23:24:09 +02:00
|
|
|
GetContext() = default;
|
|
|
|
|
2019-05-24 22:24:52 +02:00
|
|
|
// This can be called to indicate that a key may be present, but cannot be
|
|
|
|
// confirmed due to IO not allowed
|
2014-09-29 20:09:09 +02:00
|
|
|
void MarkKeyMayExist();
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
|
|
|
|
// Records this key, value, and any meta-data (such as sequence number and
|
|
|
|
// state) into this GetContext.
|
|
|
|
//
|
2018-04-06 00:54:24 +02:00
|
|
|
// If the parsed_key matches the user key that we are looking for, sets
|
2019-05-24 22:24:52 +02:00
|
|
|
// matched to true.
|
2018-04-06 00:54:24 +02:00
|
|
|
//
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
// Returns True if more keys need to be read (due to merges) or
|
|
|
|
// False if the complete value has been found.
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 18:49:03 +02:00
|
|
|
bool SaveValue(const ParsedInternalKey& parsed_key, const Slice& value,
|
2018-04-06 00:54:24 +02:00
|
|
|
bool* matched, Cleanable* value_pinner = nullptr);
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
|
|
|
|
// Simplified version of the previous function. Should only be used when we
|
|
|
|
// know that the operation is a Put.
|
|
|
|
void SaveValue(const Slice& value, SequenceNumber seq);
|
|
|
|
|
2014-09-29 20:09:09 +02:00
|
|
|
GetState State() const { return state_; }
|
|
|
|
|
Use only "local" range tombstones during Get (#4449)
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 21:29:29 +02:00
|
|
|
SequenceNumber* max_covering_tombstone_seq() {
|
|
|
|
return max_covering_tombstone_seq_;
|
|
|
|
}
|
2016-11-16 02:18:32 +01:00
|
|
|
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 18:49:03 +02:00
|
|
|
PinnedIteratorsManager* pinned_iters_mgr() { return pinned_iters_mgr_; }
|
|
|
|
|
2015-06-23 19:25:45 +02:00
|
|
|
// If a non-null string is passed, all the SaveValue calls will be
|
|
|
|
// logged into the string. The operations can then be replayed on
|
|
|
|
// another GetContext with replayGetContextLog.
|
|
|
|
void SetReplayLog(std::string* replay_log) { replay_log_ = replay_log; }
|
|
|
|
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
// Do we need to fetch the SequenceNumber for this key?
|
|
|
|
bool NeedToReadSequence() const { return (seq_ != nullptr); }
|
|
|
|
|
2017-06-12 15:58:25 +02:00
|
|
|
bool sample() const { return sample_; }
|
|
|
|
|
2017-09-11 17:58:52 +02:00
|
|
|
bool CheckCallback(SequenceNumber seq) {
|
|
|
|
if (callback_) {
|
2018-06-27 21:05:29 +02:00
|
|
|
return callback_->IsVisible(seq);
|
2017-09-11 17:58:52 +02:00
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2018-07-21 01:43:13 +02:00
|
|
|
void ReportCounters();
|
2017-12-13 06:06:26 +01:00
|
|
|
|
2019-07-08 09:09:44 +02:00
|
|
|
uint64_t get_tracing_get_id() const { return tracing_get_id_; }
|
2019-07-04 03:45:36 +02:00
|
|
|
|
2014-09-29 20:09:09 +02:00
|
|
|
private:
|
|
|
|
const Comparator* ucmp_;
|
|
|
|
const MergeOperator* merge_operator_;
|
|
|
|
// the merge operations encountered;
|
|
|
|
Logger* logger_;
|
|
|
|
Statistics* statistics_;
|
|
|
|
|
|
|
|
GetState state_;
|
|
|
|
Slice user_key_;
|
2017-03-13 19:44:50 +01:00
|
|
|
PinnableSlice* pinnable_val_;
|
2014-09-29 20:09:09 +02:00
|
|
|
bool* value_found_; // Is value set correctly? Used by KeyMayExist
|
|
|
|
MergeContext* merge_context_;
|
Use only "local" range tombstones during Get (#4449)
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 21:29:29 +02:00
|
|
|
SequenceNumber* max_covering_tombstone_seq_;
|
2015-03-03 19:59:36 +01:00
|
|
|
Env* env_;
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
2015-10-16 01:37:15 +02:00
|
|
|
// If a key is found, seq_ will be set to the SequenceNumber of most recent
|
|
|
|
// write to the key or kMaxSequenceNumber if unknown
|
|
|
|
SequenceNumber* seq_;
|
2015-06-23 19:25:45 +02:00
|
|
|
std::string* replay_log_;
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 18:49:03 +02:00
|
|
|
// Used to temporarily pin blocks when state_ == GetContext::kMerge
|
|
|
|
PinnedIteratorsManager* pinned_iters_mgr_;
|
2017-09-11 17:58:52 +02:00
|
|
|
ReadCallback* callback_;
|
2017-06-12 15:58:25 +02:00
|
|
|
bool sample_;
|
2017-10-03 18:08:07 +02:00
|
|
|
bool* is_blob_index_;
|
2019-07-04 03:45:36 +02:00
|
|
|
// Used for block cache tracing only. A tracing get id uniquely identifies a
|
|
|
|
// Get or a MultiGet.
|
|
|
|
const uint64_t tracing_get_id_;
|
2019-07-16 23:13:50 +02:00
|
|
|
bool do_merge_;
|
2014-09-29 20:09:09 +02:00
|
|
|
};
|
|
|
|
|
2019-05-24 22:24:52 +02:00
|
|
|
// Call this to replay a log and bring the get_context up to date. The replay
|
|
|
|
// log must have been created by another GetContext object, whose replay log
|
|
|
|
// must have been set by calling GetContext::SetReplayLog().
|
2015-06-23 19:25:45 +02:00
|
|
|
void replayGetContextLog(const Slice& replay_log, const Slice& user_key,
|
2017-07-17 23:53:15 +02:00
|
|
|
GetContext* get_context,
|
|
|
|
Cleanable* value_pinner = nullptr);
|
2015-06-23 19:25:45 +02:00
|
|
|
|
2014-09-29 20:09:09 +02:00
|
|
|
} // namespace rocksdb
|