2016-02-10 00:12:00 +01:00
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
2017-07-16 01:03:42 +02:00
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
2013-10-16 20:50:50 +02:00
|
|
|
|
|
|
|
#include <map>
|
|
|
|
#include <memory>
|
|
|
|
#include <string>
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
#include <utility>
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
#include <vector>
|
2013-10-16 20:50:50 +02:00
|
|
|
|
2019-09-16 19:31:27 +02:00
|
|
|
#include "db/db_impl/db_impl.h"
|
2014-01-28 06:58:46 +01:00
|
|
|
#include "db/dbformat.h"
|
2013-11-20 01:29:42 +01:00
|
|
|
#include "db/table_properties_collector.h"
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
|
|
|
#include "env/composite_env_wrapper.h"
|
2019-09-16 19:31:27 +02:00
|
|
|
#include "file/sequence_file_reader.h"
|
|
|
|
#include "file/writable_file_writer.h"
|
2017-04-06 04:02:00 +02:00
|
|
|
#include "options/cf_options.h"
|
2015-09-02 22:58:22 +02:00
|
|
|
#include "rocksdb/table.h"
|
2019-05-30 23:47:29 +02:00
|
|
|
#include "table/block_based/block_based_table_factory.h"
|
2019-05-31 02:39:43 +02:00
|
|
|
#include "table/meta_blocks.h"
|
2019-05-30 23:47:29 +02:00
|
|
|
#include "table/plain/plain_table_factory.h"
|
2014-01-28 06:58:46 +01:00
|
|
|
#include "table/table_builder.h"
|
2019-05-30 20:21:38 +02:00
|
|
|
#include "test_util/testharness.h"
|
|
|
|
#include "test_util/testutil.h"
|
2019-05-31 02:39:43 +02:00
|
|
|
#include "util/coding.h"
|
2013-10-16 20:50:50 +02:00
|
|
|
|
2020-02-20 21:07:53 +01:00
|
|
|
namespace ROCKSDB_NAMESPACE {
|
2013-10-16 20:50:50 +02:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
class TablePropertiesTest : public testing::Test,
|
|
|
|
public testing::WithParamInterface<bool> {
|
|
|
|
public:
|
2019-02-14 22:52:47 +01:00
|
|
|
void SetUp() override { backward_mode_ = GetParam(); }
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
|
|
|
bool backward_mode_;
|
|
|
|
};
|
2013-10-16 20:50:50 +02:00
|
|
|
|
|
|
|
// Utilities test functions
|
2014-04-10 06:17:14 +02:00
|
|
|
namespace {
|
2015-10-09 01:57:35 +02:00
|
|
|
static const uint32_t kTestColumnFamilyId = 66;
|
2016-04-07 08:10:32 +02:00
|
|
|
static const std::string kTestColumnFamilyName = "test_column_fam";
|
2015-10-09 01:57:35 +02:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
void MakeBuilder(const Options& options, const ImmutableCFOptions& ioptions,
|
2018-05-21 23:33:55 +02:00
|
|
|
const MutableCFOptions& moptions,
|
2014-01-27 22:53:22 +01:00
|
|
|
const InternalKeyComparator& internal_comparator,
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
const std::vector<std::unique_ptr<IntTblPropCollectorFactory>>*
|
|
|
|
int_tbl_prop_collector_factories,
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
std::unique_ptr<WritableFileWriter>* writable,
|
2014-01-27 22:53:22 +01:00
|
|
|
std::unique_ptr<TableBuilder>* builder) {
|
2018-11-09 20:17:34 +01:00
|
|
|
std::unique_ptr<WritableFile> wf(new test::StringSink);
|
2018-08-23 19:04:10 +02:00
|
|
|
writable->reset(
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
|
|
|
new WritableFileWriter(NewLegacyWritableFileWrapper(std::move(wf)),
|
|
|
|
"" /* don't care */, EnvOptions()));
|
2016-09-18 07:30:43 +02:00
|
|
|
int unknown_level = -1;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
builder->reset(NewTableBuilder(
|
2018-05-21 23:33:55 +02:00
|
|
|
ioptions, moptions, internal_comparator, int_tbl_prop_collector_factories,
|
|
|
|
kTestColumnFamilyId, kTestColumnFamilyName, writable->get(),
|
2019-03-18 20:07:35 +01:00
|
|
|
options.compression, options.sample_for_compression,
|
|
|
|
options.compression_opts, unknown_level));
|
2013-10-16 20:50:50 +02:00
|
|
|
}
|
2014-04-10 06:17:14 +02:00
|
|
|
} // namespace
|
2013-10-16 20:50:50 +02:00
|
|
|
|
|
|
|
// Collects keys that starts with "A" in a table.
|
2013-11-20 01:29:42 +01:00
|
|
|
class RegularKeysStartWithA: public TablePropertiesCollector {
|
2013-10-16 20:50:50 +02:00
|
|
|
public:
|
2015-02-26 20:28:41 +01:00
|
|
|
const char* Name() const override { return "RegularKeysStartWithA"; }
|
2013-10-16 20:50:50 +02:00
|
|
|
|
2015-02-26 20:28:41 +01:00
|
|
|
Status Finish(UserCollectedProperties* properties) override {
|
2013-10-16 20:50:50 +02:00
|
|
|
std::string encoded;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
std::string encoded_num_puts;
|
|
|
|
std::string encoded_num_deletes;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
std::string encoded_num_single_deletes;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
std::string encoded_num_size_changes;
|
2013-10-16 20:50:50 +02:00
|
|
|
PutVarint32(&encoded, count_);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
PutVarint32(&encoded_num_puts, num_puts_);
|
|
|
|
PutVarint32(&encoded_num_deletes, num_deletes_);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
PutVarint32(&encoded_num_single_deletes, num_single_deletes_);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
PutVarint32(&encoded_num_size_changes, num_size_changes_);
|
|
|
|
*properties = UserCollectedProperties{
|
|
|
|
{"TablePropertiesTest", message_},
|
|
|
|
{"Count", encoded},
|
|
|
|
{"NumPuts", encoded_num_puts},
|
|
|
|
{"NumDeletes", encoded_num_deletes},
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
{"NumSingleDeletes", encoded_num_single_deletes},
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
{"NumSizeChanges", encoded_num_size_changes},
|
2013-10-16 20:50:50 +02:00
|
|
|
};
|
|
|
|
return Status::OK();
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
}
|
2013-10-16 20:50:50 +02:00
|
|
|
|
2018-03-05 22:08:17 +01:00
|
|
|
Status AddUserKey(const Slice& user_key, const Slice& /*value*/,
|
|
|
|
EntryType type, SequenceNumber /*seq*/,
|
|
|
|
uint64_t file_size) override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
// simply asssume all user keys are not empty.
|
|
|
|
if (user_key.data()[0] == 'A') {
|
|
|
|
++count_;
|
|
|
|
}
|
|
|
|
if (type == kEntryPut) {
|
|
|
|
num_puts_++;
|
|
|
|
} else if (type == kEntryDelete) {
|
|
|
|
num_deletes_++;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
} else if (type == kEntrySingleDelete) {
|
|
|
|
num_single_deletes_++;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
}
|
|
|
|
if (file_size < file_size_) {
|
|
|
|
message_ = "File size should not decrease.";
|
|
|
|
} else if (file_size != file_size_) {
|
|
|
|
num_size_changes_++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2019-02-14 22:52:47 +01:00
|
|
|
UserCollectedProperties GetReadableProperties() const override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
return UserCollectedProperties{};
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::string message_ = "Rocksdb";
|
|
|
|
uint32_t count_ = 0;
|
|
|
|
uint32_t num_puts_ = 0;
|
|
|
|
uint32_t num_deletes_ = 0;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
uint32_t num_single_deletes_ = 0;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
uint32_t num_size_changes_ = 0;
|
|
|
|
uint64_t file_size_ = 0;
|
|
|
|
};
|
|
|
|
|
|
|
|
// Collects keys that starts with "A" in a table. Backward compatible mode
|
|
|
|
// It is also used to test internal key table property collector
|
|
|
|
class RegularKeysStartWithABackwardCompatible
|
|
|
|
: public TablePropertiesCollector {
|
|
|
|
public:
|
|
|
|
const char* Name() const override { return "RegularKeysStartWithA"; }
|
|
|
|
|
|
|
|
Status Finish(UserCollectedProperties* properties) override {
|
|
|
|
std::string encoded;
|
|
|
|
PutVarint32(&encoded, count_);
|
|
|
|
*properties = UserCollectedProperties{{"TablePropertiesTest", "Rocksdb"},
|
|
|
|
{"Count", encoded}};
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2018-03-05 22:08:17 +01:00
|
|
|
Status Add(const Slice& user_key, const Slice& /*value*/) override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
// simply asssume all user keys are not empty.
|
|
|
|
if (user_key.data()[0] == 'A') {
|
|
|
|
++count_;
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2019-02-14 22:52:47 +01:00
|
|
|
UserCollectedProperties GetReadableProperties() const override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
return UserCollectedProperties{};
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
uint32_t count_ = 0;
|
|
|
|
};
|
|
|
|
|
|
|
|
class RegularKeysStartWithAInternal : public IntTblPropCollector {
|
|
|
|
public:
|
|
|
|
const char* Name() const override { return "RegularKeysStartWithA"; }
|
|
|
|
|
|
|
|
Status Finish(UserCollectedProperties* properties) override {
|
|
|
|
std::string encoded;
|
|
|
|
PutVarint32(&encoded, count_);
|
|
|
|
*properties = UserCollectedProperties{{"TablePropertiesTest", "Rocksdb"},
|
|
|
|
{"Count", encoded}};
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2018-03-05 22:08:17 +01:00
|
|
|
Status InternalAdd(const Slice& user_key, const Slice& /*value*/,
|
|
|
|
uint64_t /*file_size*/) override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
// simply asssume all user keys are not empty.
|
|
|
|
if (user_key.data()[0] == 'A') {
|
|
|
|
++count_;
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
2013-10-16 20:50:50 +02:00
|
|
|
|
2019-03-18 20:07:35 +01:00
|
|
|
void BlockAdd(uint64_t /* blockRawBytes */,
|
|
|
|
uint64_t /* blockCompressedBytesFast */,
|
|
|
|
uint64_t /* blockCompressedBytesSlow */) override {
|
|
|
|
// Nothing to do.
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2019-02-14 22:52:47 +01:00
|
|
|
UserCollectedProperties GetReadableProperties() const override {
|
2014-02-12 02:52:18 +01:00
|
|
|
return UserCollectedProperties{};
|
2013-11-20 01:29:42 +01:00
|
|
|
}
|
|
|
|
|
2013-10-16 20:50:50 +02:00
|
|
|
private:
|
|
|
|
uint32_t count_ = 0;
|
|
|
|
};
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
class RegularKeysStartWithAFactory : public IntTblPropCollectorFactory,
|
|
|
|
public TablePropertiesCollectorFactory {
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
public:
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
explicit RegularKeysStartWithAFactory(bool backward_mode)
|
|
|
|
: backward_mode_(backward_mode) {}
|
2019-02-14 22:52:47 +01:00
|
|
|
TablePropertiesCollector* CreateTablePropertiesCollector(
|
2015-10-09 01:57:35 +02:00
|
|
|
TablePropertiesCollectorFactory::Context context) override {
|
|
|
|
EXPECT_EQ(kTestColumnFamilyId, context.column_family_id);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
if (!backward_mode_) {
|
|
|
|
return new RegularKeysStartWithA();
|
|
|
|
} else {
|
|
|
|
return new RegularKeysStartWithABackwardCompatible();
|
|
|
|
}
|
|
|
|
}
|
2019-02-14 22:52:47 +01:00
|
|
|
IntTblPropCollector* CreateIntTblPropCollector(
|
2018-03-05 22:08:17 +01:00
|
|
|
uint32_t /*column_family_id*/) override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
return new RegularKeysStartWithAInternal();
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
}
|
2015-02-26 20:28:41 +01:00
|
|
|
const char* Name() const override { return "RegularKeysStartWithA"; }
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
|
|
|
bool backward_mode_;
|
|
|
|
};
|
|
|
|
|
|
|
|
class FlushBlockEveryThreePolicy : public FlushBlockPolicy {
|
|
|
|
public:
|
2019-02-14 22:52:47 +01:00
|
|
|
bool Update(const Slice& /*key*/, const Slice& /*value*/) override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
return (++count_ % 3U == 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
uint64_t count_ = 0;
|
|
|
|
};
|
|
|
|
|
|
|
|
class FlushBlockEveryThreePolicyFactory : public FlushBlockPolicyFactory {
|
|
|
|
public:
|
|
|
|
explicit FlushBlockEveryThreePolicyFactory() {}
|
|
|
|
|
|
|
|
const char* Name() const override {
|
|
|
|
return "FlushBlockEveryThreePolicyFactory";
|
|
|
|
}
|
|
|
|
|
|
|
|
FlushBlockPolicy* NewFlushBlockPolicy(
|
2018-03-05 22:08:17 +01:00
|
|
|
const BlockBasedTableOptions& /*table_options*/,
|
|
|
|
const BlockBuilder& /*data_block_builder*/) const override {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
return new FlushBlockEveryThreePolicy;
|
|
|
|
}
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
};
|
|
|
|
|
2015-07-02 01:13:49 +02:00
|
|
|
extern const uint64_t kBlockBasedTableMagicNumber;
|
|
|
|
extern const uint64_t kPlainTableMagicNumber;
|
2014-04-10 06:17:14 +02:00
|
|
|
namespace {
|
2013-12-06 01:51:26 +01:00
|
|
|
void TestCustomizedTablePropertiesCollector(
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
bool backward_mode, uint64_t magic_number, bool test_int_tbl_prop_collector,
|
|
|
|
const Options& options, const InternalKeyComparator& internal_comparator) {
|
2013-10-16 20:50:50 +02:00
|
|
|
// make sure the entries will be inserted with order.
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
std::map<std::pair<std::string, ValueType>, std::string> kvs = {
|
|
|
|
{{"About ", kTypeValue}, "val5"}, // starts with 'A'
|
|
|
|
{{"Abstract", kTypeValue}, "val2"}, // starts with 'A'
|
|
|
|
{{"Around ", kTypeValue}, "val7"}, // starts with 'A'
|
|
|
|
{{"Beyond ", kTypeValue}, "val3"},
|
|
|
|
{{"Builder ", kTypeValue}, "val1"},
|
|
|
|
{{"Love ", kTypeDeletion}, ""},
|
|
|
|
{{"Cancel ", kTypeValue}, "val4"},
|
|
|
|
{{"Find ", kTypeValue}, "val6"},
|
|
|
|
{{"Rocks ", kTypeDeletion}, ""},
|
|
|
|
{{"Foo ", kTypeSingleDeletion}, ""},
|
2013-10-16 20:50:50 +02:00
|
|
|
};
|
|
|
|
|
2013-12-06 01:51:26 +01:00
|
|
|
// -- Step 1: build table
|
|
|
|
std::unique_ptr<TableBuilder> builder;
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
std::unique_ptr<WritableFileWriter> writer;
|
2014-09-05 18:53:04 +02:00
|
|
|
const ImmutableCFOptions ioptions(options);
|
2018-05-21 23:33:55 +02:00
|
|
|
const MutableCFOptions moptions(options);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
std::vector<std::unique_ptr<IntTblPropCollectorFactory>>
|
|
|
|
int_tbl_prop_collector_factories;
|
|
|
|
if (test_int_tbl_prop_collector) {
|
|
|
|
int_tbl_prop_collector_factories.emplace_back(
|
|
|
|
new RegularKeysStartWithAFactory(backward_mode));
|
|
|
|
} else {
|
2016-09-24 01:34:04 +02:00
|
|
|
GetIntTblPropCollectorFactory(ioptions, &int_tbl_prop_collector_factories);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
}
|
2018-05-21 23:33:55 +02:00
|
|
|
MakeBuilder(options, ioptions, moptions, internal_comparator,
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
&int_tbl_prop_collector_factories, &writer, &builder);
|
2013-12-06 01:51:26 +01:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
SequenceNumber seqNum = 0U;
|
2013-12-06 01:51:26 +01:00
|
|
|
for (const auto& kv : kvs) {
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
InternalKey ikey(kv.first.first, seqNum++, kv.first.second);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
builder->Add(ikey.Encode(), kv.second);
|
2013-12-06 01:51:26 +01:00
|
|
|
}
|
|
|
|
ASSERT_OK(builder->Finish());
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
writer->Flush();
|
2013-12-06 01:51:26 +01:00
|
|
|
|
|
|
|
// -- Step 2: Read properties
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
|
|
|
LegacyWritableFileWrapper* file =
|
|
|
|
static_cast<LegacyWritableFileWrapper*>(writer->writable_file());
|
|
|
|
test::StringSink* fwf = static_cast<test::StringSink*>(file->target());
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
std::unique_ptr<RandomAccessFileReader> fake_file_reader(
|
|
|
|
test::GetRandomAccessFileReader(
|
2015-08-05 16:33:27 +02:00
|
|
|
new test::StringSource(fwf->contents())));
|
2014-02-08 04:26:49 +01:00
|
|
|
TableProperties* props;
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
Status s = ReadTableProperties(fake_file_reader.get(), fwf->contents().size(),
|
2018-06-16 04:24:21 +02:00
|
|
|
magic_number, ioptions, &props,
|
|
|
|
true /* compression_type_missing */);
|
2014-02-08 04:26:49 +01:00
|
|
|
std::unique_ptr<TableProperties> props_guard(props);
|
2013-12-06 01:51:26 +01:00
|
|
|
ASSERT_OK(s);
|
|
|
|
|
2014-02-08 04:26:49 +01:00
|
|
|
auto user_collected = props->user_collected_properties;
|
2013-12-06 01:51:26 +01:00
|
|
|
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("TablePropertiesTest"), user_collected.end());
|
2013-12-06 01:51:26 +01:00
|
|
|
ASSERT_EQ("Rocksdb", user_collected.at("TablePropertiesTest"));
|
|
|
|
|
|
|
|
uint32_t starts_with_A = 0;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("Count"), user_collected.end());
|
2013-12-06 01:51:26 +01:00
|
|
|
Slice key(user_collected.at("Count"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key, &starts_with_A));
|
|
|
|
ASSERT_EQ(3u, starts_with_A);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
|
|
|
if (!backward_mode && !test_int_tbl_prop_collector) {
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
uint32_t num_puts;
|
|
|
|
ASSERT_NE(user_collected.find("NumPuts"), user_collected.end());
|
|
|
|
Slice key_puts(user_collected.at("NumPuts"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_puts, &num_puts));
|
|
|
|
ASSERT_EQ(7u, num_puts);
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
uint32_t num_deletes;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("NumDeletes"), user_collected.end());
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
Slice key_deletes(user_collected.at("NumDeletes"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_deletes, &num_deletes));
|
|
|
|
ASSERT_EQ(2u, num_deletes);
|
|
|
|
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
uint32_t num_single_deletes;
|
|
|
|
ASSERT_NE(user_collected.find("NumSingleDeletes"), user_collected.end());
|
|
|
|
Slice key_single_deletes(user_collected.at("NumSingleDeletes"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_single_deletes, &num_single_deletes));
|
|
|
|
ASSERT_EQ(1u, num_single_deletes);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
|
|
|
uint32_t num_size_changes;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("NumSizeChanges"), user_collected.end());
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
Slice key_size_changes(user_collected.at("NumSizeChanges"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_size_changes, &num_size_changes));
|
|
|
|
ASSERT_GE(num_size_changes, 2u);
|
|
|
|
}
|
2013-12-06 01:51:26 +01:00
|
|
|
}
|
2014-04-10 06:17:14 +02:00
|
|
|
} // namespace
|
2013-12-06 01:51:26 +01:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
TEST_P(TablePropertiesTest, CustomizedTablePropertiesCollector) {
|
2013-11-20 01:29:42 +01:00
|
|
|
// Test properties collectors with internal keys or regular keys
|
2013-12-06 01:51:26 +01:00
|
|
|
// for block based table
|
2013-10-16 20:50:50 +02:00
|
|
|
for (bool encode_as_internal : { true, false }) {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
Options options;
|
|
|
|
BlockBasedTableOptions table_options;
|
|
|
|
table_options.flush_block_policy_factory =
|
|
|
|
std::make_shared<FlushBlockEveryThreePolicyFactory>();
|
|
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
|
|
|
2014-01-27 22:53:22 +01:00
|
|
|
test::PlainInternalKeyComparator ikc(options.comparator);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
std::shared_ptr<TablePropertiesCollectorFactory> collector_factory(
|
|
|
|
new RegularKeysStartWithAFactory(backward_mode_));
|
|
|
|
options.table_properties_collector_factories.resize(1);
|
|
|
|
options.table_properties_collector_factories[0] = collector_factory;
|
|
|
|
|
|
|
|
TestCustomizedTablePropertiesCollector(backward_mode_,
|
|
|
|
kBlockBasedTableMagicNumber,
|
2014-01-27 22:53:22 +01:00
|
|
|
encode_as_internal, options, ikc);
|
2013-12-06 01:51:26 +01:00
|
|
|
|
2015-07-02 01:13:49 +02:00
|
|
|
#ifndef ROCKSDB_LITE // PlainTable is not supported in Lite
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
// test plain table
|
|
|
|
PlainTableOptions plain_table_options;
|
|
|
|
plain_table_options.user_key_len = 8;
|
|
|
|
plain_table_options.bloom_bits_per_key = 8;
|
|
|
|
plain_table_options.hash_table_ratio = 0;
|
2014-07-18 09:08:38 +02:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
options.table_factory =
|
|
|
|
std::make_shared<PlainTableFactory>(plain_table_options);
|
|
|
|
TestCustomizedTablePropertiesCollector(backward_mode_,
|
|
|
|
kPlainTableMagicNumber,
|
|
|
|
encode_as_internal, options, ikc);
|
2015-07-02 01:13:49 +02:00
|
|
|
#endif // !ROCKSDB_LITE
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
}
|
2013-10-16 20:50:50 +02:00
|
|
|
}
|
|
|
|
|
2014-04-10 06:17:14 +02:00
|
|
|
namespace {
|
2013-12-06 01:51:26 +01:00
|
|
|
void TestInternalKeyPropertiesCollector(
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
bool backward_mode, uint64_t magic_number, bool sanitized,
|
2013-12-06 01:51:26 +01:00
|
|
|
std::shared_ptr<TableFactory> table_factory) {
|
2013-10-16 20:50:50 +02:00
|
|
|
InternalKey keys[] = {
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
InternalKey("A ", 0, ValueType::kTypeValue),
|
|
|
|
InternalKey("B ", 1, ValueType::kTypeValue),
|
|
|
|
InternalKey("C ", 2, ValueType::kTypeValue),
|
|
|
|
InternalKey("W ", 3, ValueType::kTypeDeletion),
|
|
|
|
InternalKey("X ", 4, ValueType::kTypeDeletion),
|
|
|
|
InternalKey("Y ", 5, ValueType::kTypeDeletion),
|
|
|
|
InternalKey("Z ", 6, ValueType::kTypeDeletion),
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
InternalKey("a ", 7, ValueType::kTypeSingleDeletion),
|
2016-05-19 23:24:48 +02:00
|
|
|
InternalKey("b ", 8, ValueType::kTypeMerge),
|
|
|
|
InternalKey("c ", 9, ValueType::kTypeMerge),
|
2013-10-16 20:50:50 +02:00
|
|
|
};
|
|
|
|
|
2013-12-06 01:51:26 +01:00
|
|
|
std::unique_ptr<TableBuilder> builder;
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
std::unique_ptr<WritableFileWriter> writable;
|
2013-12-06 01:51:26 +01:00
|
|
|
Options options;
|
2014-01-27 22:53:22 +01:00
|
|
|
test::PlainInternalKeyComparator pikc(options.comparator);
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
std::vector<std::unique_ptr<IntTblPropCollectorFactory>>
|
|
|
|
int_tbl_prop_collector_factories;
|
2013-12-06 01:51:26 +01:00
|
|
|
options.table_factory = table_factory;
|
|
|
|
if (sanitized) {
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
options.table_properties_collector_factories.emplace_back(
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
new RegularKeysStartWithAFactory(backward_mode));
|
2013-12-06 01:51:26 +01:00
|
|
|
// with sanitization, even regular properties collector will be able to
|
|
|
|
// handle internal keys.
|
|
|
|
auto comparator = options.comparator;
|
|
|
|
// HACK: Set options.info_log to avoid writing log in
|
|
|
|
// SanitizeOptions().
|
2015-08-05 16:33:27 +02:00
|
|
|
options.info_log = std::make_shared<test::NullLogger>();
|
2014-01-27 22:53:22 +01:00
|
|
|
options = SanitizeOptions("db", // just a place holder
|
|
|
|
options);
|
2016-09-24 01:34:04 +02:00
|
|
|
ImmutableCFOptions ioptions(options);
|
|
|
|
GetIntTblPropCollectorFactory(ioptions, &int_tbl_prop_collector_factories);
|
2013-12-06 01:51:26 +01:00
|
|
|
options.comparator = comparator;
|
|
|
|
}
|
2014-09-05 18:53:04 +02:00
|
|
|
const ImmutableCFOptions ioptions(options);
|
2018-05-21 23:33:55 +02:00
|
|
|
MutableCFOptions moptions(options);
|
2013-10-16 20:50:50 +02:00
|
|
|
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
for (int iter = 0; iter < 2; ++iter) {
|
2018-05-21 23:33:55 +02:00
|
|
|
MakeBuilder(options, ioptions, moptions, pikc,
|
|
|
|
&int_tbl_prop_collector_factories, &writable, &builder);
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
for (const auto& k : keys) {
|
|
|
|
builder->Add(k.Encode(), "val");
|
|
|
|
}
|
2013-10-16 20:50:50 +02:00
|
|
|
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
ASSERT_OK(builder->Finish());
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
writable->Flush();
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 23:47:08 +01:00
|
|
|
LegacyWritableFileWrapper* file =
|
|
|
|
static_cast<LegacyWritableFileWrapper*>(writable->writable_file());
|
|
|
|
test::StringSink* fwf = static_cast<test::StringSink*>(file->target());
|
2018-11-09 20:17:34 +01:00
|
|
|
std::unique_ptr<RandomAccessFileReader> reader(
|
|
|
|
test::GetRandomAccessFileReader(
|
|
|
|
new test::StringSource(fwf->contents())));
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
TableProperties* props;
|
|
|
|
Status s =
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
2015-07-18 01:16:11 +02:00
|
|
|
ReadTableProperties(reader.get(), fwf->contents().size(), magic_number,
|
2018-06-16 04:24:21 +02:00
|
|
|
ioptions, &props, true /* compression_type_missing */);
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
ASSERT_OK(s);
|
|
|
|
|
|
|
|
std::unique_ptr<TableProperties> props_guard(props);
|
|
|
|
auto user_collected = props->user_collected_properties;
|
|
|
|
uint64_t deleted = GetDeletedKeys(user_collected);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_EQ(5u, deleted); // deletes + single-deletes
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
|
2016-05-19 23:24:48 +02:00
|
|
|
bool property_present;
|
|
|
|
uint64_t merges = GetMergeOperands(user_collected, &property_present);
|
|
|
|
ASSERT_TRUE(property_present);
|
|
|
|
ASSERT_EQ(2u, merges);
|
|
|
|
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
if (sanitized) {
|
|
|
|
uint32_t starts_with_A = 0;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("Count"), user_collected.end());
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
Slice key(user_collected.at("Count"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key, &starts_with_A));
|
|
|
|
ASSERT_EQ(1u, starts_with_A);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
|
|
|
if (!backward_mode) {
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
uint32_t num_puts;
|
|
|
|
ASSERT_NE(user_collected.find("NumPuts"), user_collected.end());
|
|
|
|
Slice key_puts(user_collected.at("NumPuts"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_puts, &num_puts));
|
|
|
|
ASSERT_EQ(3u, num_puts);
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
uint32_t num_deletes;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
ASSERT_NE(user_collected.find("NumDeletes"), user_collected.end());
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
Slice key_deletes(user_collected.at("NumDeletes"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_deletes, &num_deletes));
|
|
|
|
ASSERT_EQ(4u, num_deletes);
|
|
|
|
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
uint32_t num_single_deletes;
|
|
|
|
ASSERT_NE(user_collected.find("NumSingleDeletes"),
|
|
|
|
user_collected.end());
|
|
|
|
Slice key_single_deletes(user_collected.at("NumSingleDeletes"));
|
|
|
|
ASSERT_TRUE(GetVarint32(&key_single_deletes, &num_single_deletes));
|
|
|
|
ASSERT_EQ(1u, num_single_deletes);
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
}
|
TablePropertiesCollectorFactory
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
2014-05-13 21:30:55 +02:00
|
|
|
}
|
2013-10-16 20:50:50 +02:00
|
|
|
}
|
|
|
|
}
|
2014-04-10 06:17:14 +02:00
|
|
|
} // namespace
|
2013-10-16 20:50:50 +02:00
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
TEST_P(TablePropertiesTest, InternalKeyPropertiesCollector) {
|
2013-12-06 01:51:26 +01:00
|
|
|
TestInternalKeyPropertiesCollector(
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
backward_mode_, kBlockBasedTableMagicNumber, true /* sanitize */,
|
|
|
|
std::make_shared<BlockBasedTableFactory>());
|
|
|
|
if (backward_mode_) {
|
|
|
|
TestInternalKeyPropertiesCollector(
|
|
|
|
backward_mode_, kBlockBasedTableMagicNumber, false /* not sanitize */,
|
|
|
|
std::make_shared<BlockBasedTableFactory>());
|
|
|
|
}
|
2014-07-18 09:08:38 +02:00
|
|
|
|
2015-07-02 01:13:49 +02:00
|
|
|
#ifndef ROCKSDB_LITE // PlainTable is not supported in Lite
|
2014-07-18 09:08:38 +02:00
|
|
|
PlainTableOptions plain_table_options;
|
|
|
|
plain_table_options.user_key_len = 8;
|
|
|
|
plain_table_options.bloom_bits_per_key = 8;
|
|
|
|
plain_table_options.hash_table_ratio = 0;
|
|
|
|
|
2013-12-06 01:51:26 +01:00
|
|
|
TestInternalKeyPropertiesCollector(
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
backward_mode_, kPlainTableMagicNumber, false /* not sanitize */,
|
2014-07-18 09:08:38 +02:00
|
|
|
std::make_shared<PlainTableFactory>(plain_table_options));
|
2015-07-02 01:13:49 +02:00
|
|
|
#endif // !ROCKSDB_LITE
|
2013-12-06 01:51:26 +01:00
|
|
|
}
|
|
|
|
|
2020-06-04 00:53:09 +02:00
|
|
|
INSTANTIATE_TEST_CASE_P(InternalKeyPropertiesCollector, TablePropertiesTest,
|
|
|
|
::testing::Bool());
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
2020-06-04 00:53:09 +02:00
|
|
|
INSTANTIATE_TEST_CASE_P(CustomizedTablePropertiesCollector, TablePropertiesTest,
|
|
|
|
::testing::Bool());
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
2015-04-06 19:04:30 +02:00
|
|
|
|
2020-02-20 21:07:53 +01:00
|
|
|
} // namespace ROCKSDB_NAMESPACE
|
2013-10-16 20:50:50 +02:00
|
|
|
|
|
|
|
int main(int argc, char** argv) {
|
2015-03-17 22:08:00 +01:00
|
|
|
::testing::InitGoogleTest(&argc, argv);
|
|
|
|
return RUN_ALL_TESTS();
|
2013-10-16 20:50:50 +02:00
|
|
|
}
|