Summary: AFIK, options builder is not used by anyone. Remove it.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, andrewkr, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59319
Summary:
This provides provides an implementation of PersistentCacheTier that is
specialized for RAM. This tier does not persist data though.
Why do we need this tier ?
This is ideal as tier 0. This tier can host data that is too hot.
Why can't we use Cache variants ?
Yes you can use them instead. This tier can potentially outperform BlockCache
in RAW mode by virtue of compression and compressed cache in block cache doesn't
seem very popular. Potentially this tier can be modified to under stand the
disadvantage of the tier below and retain data that the tier below is bad at
handling (for example index and bloom data that is huge in size)
Test Plan: Run unit tests added
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57069
Summary:
This diff provides the basic interface definitions of persistent read
cache system
PersistentCacheOptions captures the persistent read cache options used to
configure and control the system
PersistentCacheTier provides the basic building block for constructing tiered
cache
PersistentTieredCache provides a logical abstraction of tiers of cache layered
over one another
Test Plan: Compile
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57051
Summary:
Extracted basic Env-related tests from mock_env_test and memenv_test into a
parameterized test for Envs: env_basic_test.
Depends on D58449. (The dependency is here only so I can keep this series of
diffs in a chain -- there is no dependency on that diff's code.)
Test Plan: ran tests
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58635
Summary:
This enables configurable Envs without recompiling. For example, my
next diff will make env_test test an Env created by NewEnvFromUri(). Then,
users can determine which Env is tested simply by providing the URI for
NewEnvFromUri() (e.g., through a CLI argument or environment variable).
The registration process allows us to register any Env that is linked with the
RocksDB library, so we can register our internal Envs as well.
The registration code is inspired by our internal InitRegistry.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, lightmark, ldemailly, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D58449
Summary:
This patch allows db_bench to initialize it's RocksDB Options via a
options file, specified by the --options_file flag. Note that if
--options_file flag is set, then it has higher priority than the
command-line argument.
Test Plan: db_bench_tool_test
Reviewers: sdong, IslamAbdelRahman, kradhakrishnan, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58533
Summary: Deprecate this one option and delete code and tests that are now superfluous.
Test Plan: all tests pass
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: msalib, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55317
Summary:
Introduce MaxOperator a simple merge operator that return the max of all operands.
This merge operand help me in benchmarking
Test Plan: Add new unitttests
Reviewers: sdong, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57873
Summary:
This is a part of effort to reduce the size of db_test.cc. We move the following tests to a separate file `db_io_failure_test.cc`:
* DropWrites
* DropWritesFlush
* NoSpaceCompactRange
* NonWritableFileSystem
* ManifestWriteError
* PutFailsParanoid
Test Plan: Run `make check` to see if the tests are working properly.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58341
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Conditionally retrofit thread_posix for use with std::thread
and reuse the same logic. Posix users continue using Posix interfaces.
Enable XPRESS compression in test runs.
Fix master introduced signed/unsigned mismatch.
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary:
For testing backups, we needed an Env that is fully isolated from other
Envs on the same machine. Our in-memory Envs (MockEnv and InMemoryEnv) were
insufficient because they don't implement most directory operations.
This diff introduces a new Env, "ChrootEnv", that translates paths such that the
chroot directory appears to be the root directory. This way, multiple Envs can
be isolated in the filesystem by using different chroot directories. Since we
use the filesystem, all directory operations are trivially supported.
Test Plan:
I parameterized the existing EnvPosixTest so it runs tests on ChrootEnv
except the ioctl-related cases.
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57543
Summary: Refactored db_bench transaction stress tests so that they can be called from unit tests as well.
Test Plan: run new unit test as well as db_bench
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55203
Summary: similar to D52809 add option to exclude zero counters.
Test Plan:
[yiwu@dev4504.prn1 ~/rocksdb] ./iostats_context_test
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from IOStatsContextTest
[ RUN ] IOStatsContextTest.ToString
[ OK ] IOStatsContextTest.ToString (0 ms)
[----------] 1 test from IOStatsContextTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54591
Summary:
Remove obolete references to files in src.mk
Fix incorrect path for reference in source.mk
Test Plan: Ran build to ensure changes do not break anything.
Reviewers: leveldb, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53733
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary:
I split the db-specific test points out into a separate file under db/
directory. There were also a few bugs to fix in xfunc.{h,cc} that prevented it
from compiling previously; see https://reviews.facebook.net/D36825.
Test Plan:
compilation works now, below command works, will also run "make xfunc".
$ make check ROCKSDB_XFUNC_TEST='managed_new' tests-regexp='DBTest' -j32
Reviewers: sdong, yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53343
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
This is an Env implementation that mirrors all storage-related methods on
two different backend Env's and verifies that they return the same
results (return status and read results). This is useful for implementing
a new Env and verifying its correctness.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: This patch moves all posix thread logic to a separate library.
The motivation is to allow another environments to easily reuse posix
threads. HDFS wraps already posix threads; this split would simplify
this code.
Test Plan: No new functionality is added to posix Env or the threading
library, thus the current tests should suffice.
Summary:
This diff is 1/3 in a sequence that introduces a skip list optimized for
a key that is a freshly-allocated const char*. The diff is broken into
pieces to make it easier to review. This piece only introduces the new
type by copying the existing SkipList, with mechanical naming changes
and reformatting.
Test Plan: new unit test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51279
Summary: forward_iterator_bench is not stable enough for build. Remove it for now.
Test Plan: Build it with both of CLANG and non-CLANG and make sure it builds.
Reviewers: rven, kradhakrishnan, anthony, yhchiang, igor, IslamAbdelRahman
Reviewed By: igor, IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50991
Summary:
Under a tailing workload, there were increased block cache
misses when a memtable was flushed because we were rebuilding iterators
in that case since the version set changed. This was exacerbated in the
case of iterate_upper_bound, since file iterators which were over the
iterate_upper_bound would have been deleted and are now brought back as
part of the Rebuild, only to be deleted again. We now renew the iterators
and only build iterators for files which are added and delete file
iterators for files which are deleted.
Refer to https://reviews.facebook.net/D50463 for previous version
Test Plan: DBTestTailingIterator.TailingIteratorTrimSeekToNext
Reviewers: anthony, IslamAbdelRahman, igor, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: yhchiang, march, dhruba, leveldb, lovro
Differential Revision: https://reviews.facebook.net/D50679
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Using a TLS random instance for skiplist makes it smaller
(useful for hash_skiplist_rep) and prepares skiplist for concurrent
adds. This diff also modifies the branching factor math to avoid an
unnecessary division.
This diff has the effect of changing the sequence of skip list node
height choices made by tests, so it has the potential to cause unit
test failures for tests that implicitly rely on the exact structure
of the skip list. Tests that try to exactly trigger a compaction are
likely suspects for this problem (these tests have always been brittle to
changes in the skiplist details). I've minimizes this risk by reseeding
the main thread's Random at the beginning of each test, increasing the
universal compaction size_ratio limit from 101% to 105% for some tests,
and verifying that the tests pass many times.
Test Plan: for i in `seq 0 9`; do make check; done
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50439
Summary:
This patch introduces OptionsSanityCheckLevel internally to enable
sanity check rocksdb options.
Utilities API will be added in the follow-up diffs.
Test Plan: Added more tests in options_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49515
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary: This patch splits the posix storage backend into Env and
the actual *File implementations. The motivation is to allow other Envs
to use posix as a library. This enables a storage backend different from
posix to split its secondary storage between a normal file system
partition managed by posix, and it own media.
Test Plan: No new functionality is added to posix Env or the library,
thus the current tests should suffice.
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
We are cleaning up dependencies.
This diff takes a first step at moving memtable files to their own
directory called memtable. In future diffs, we will move other memtable
files from db to memtable.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48915
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
Summary: manual_compaction_test.cc incorrectly in util. Moved to db.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48687
Summary:
As part of tech debt week, we are cleaning up dependencies.
This diff moves db_test_util.[h,cc] from util to db directory.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48543
Summary:
Refactor dump_tool and undump_tool so that it's possible to use them with customized options
for example setting a specific comparator similar to what Dragon is doing with the LdbTool
https://phabricator.fb.com/diffusion/FBCODE/browse/master/dragon/tools/Ldb.cpp
Test Plan:
compiles
used it to dump / undump a dragon shard
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, adsharma
Differential Revision: https://reviews.facebook.net/D47853
This commit adds two new targets to the Makefile: rocksdb.cc and rocksdb.h
These files, when combined with the c.h header, are a self-contained RocksDB
source distribution called an amalgamation. (The name comes from SQLite's, which
is similar in concept.)
The main benefit of an amalgamation is that it's very easy to drop into a
new project. It also compiles faster compared to compiling individual source
files and potentially gives the compiler more opportunity to make optimizations
since it can see all functions at once.
rocksdb.cc and rocksdb.h are generated by a new script, amalgamate.py.
A detailed description of how amalgamate.py works is in a comment at the top of
the file.
There are also some small changes to existing files to enable the amalgamation:
* Use quotes for includes in unity build
* Fix an old header inclusion in util/xfunc.cc
* Move some includes outside ifdef in util/env_hdfs.cc
* Separate out tool sources in Makefile so they won't be included in unity.cc
* Unity build now produces a static library
Closes#733
Summary:
This patch defines the format of RocksDB options file, which
follows the INI file format, and implements functions for its
serialization and deserialization. An example RocksDB options
file can be found in examples/rocksdb_option_file_example.ini.
A typical RocksDB options file has three sections, which are
Version, DBOptions, and more than one CFOptions. The RocksDB
options file in general follows the basic INI file format
with the following extensions / modifications:
* Escaped characters
We escaped the following characters:
- \n -- line feed - new line
- \r -- carriage return
- \\ -- backslash \
- \: -- colon symbol :
- \# -- hash tag #
* Comments
We support # style comments. Comments can appear at the ending
part of a line.
* Statements
A statement is of the form option_name = value.
Each statement contains a '=', where extra white-spaces
are supported. However, we don't support multi-lined statement.
Furthermore, each line can only contain at most one statement.
* Section
Sections are of the form [SecitonTitle "SectionArgument"],
where section argument is optional.
* List
We use colon-separated string to represent a list.
For instance, n1:n2:n3:n4 is a list containing four values.
Below is an example of a RocksDB options file:
[Version]
rocksdb_version=4.0.0
options_file_version=1.0
[DBOptions]
max_open_files=12345
max_background_flushes=301
[CFOptions "default"]
[CFOptions "the second column family"]
[CFOptions "the third column family"]
Test Plan: Added many tests in options_test.cc
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46059
Summary:
Fix hex2String performance issues by removing sscanf dependency.
Also fixed some edge case handling (odd length, bad input).
Test Plan: Created a test file which called old and new implementation, and validated results are the same. I'll paste results in the phabricator diff.
Reviewers: igor, rven, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: thatsafunnyname, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46785
Summary:
This is an initial version of bulk load feature
This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping
Test Plan: unit testing
Reviewers: igor, ott, sdong
Reviewed By: sdong
Subscribers: leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D39081
Summary:
Builder and CompactionJob share a lot of fairly complex code. This patch
refactors this code into a separate class, the CompactionIterator. Because the
shared code is fairly complex, this patch hopefully improves maintainability.
While there are is a lot of potential for further improvements, the patch is
intentionally pretty close to the original structure because the change is
already complex enough.
Test Plan: make clean all check && ./db_stress
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46197
Summary:
Prototype of API to allow MyRocks to override default Mutex/CondVar used by transactions with their own implementations. They would simply need to pass their own implementations of Mutex/CondVar to the templated TransactionDB::Open().
Default implementation of TransactionDBMutex/TransactionDBCondVar provided (but the code is not currently changed to use this).
Let me know if this API makes sense or if it should be changed
Test Plan: n/a
Reviewers: yhchiang, rven, igor, sdong, spetrunia
Reviewed By: spetrunia
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43761
Summary: Provide a way to specify a detailed static error message for a Status without incurring a memcpy. Let me know what people think of this approach.
Test Plan: added simple test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44259
