Summary:
`FaultInjectionTest{Env,FS}::ReopenWritableFile()` functions were accidentally deleting WALs from previous `db_stress` runs causing verification to fail. They were operating under the assumption that `ReopenWritableFile()` would delete any existing file. It was a reasonable assumption considering the `{Env,FileSystem}::ReopenWritableFile()` documentation stated that would happen. The only problem was neither the implementations we offer nor the "real" clients in RocksDB code followed that contract. So, this PR updates the contract as well as fixing the fault injection client usage.
The fault injection change exposed that `ExternalSSTFileBasicTest.SyncFailure` was relying on a fault injection `Env` dropping unsynced data written by a regular `Env`. I changed that test to make its `SstFileWriter` use fault injection `Env`, and also implemented `LinkFile()` in fault injection so the unsynced data is tracked under the new name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8995
Test Plan:
- Verified it fixes the following failure:
```
$ ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --ops_per_thread=1000 --prefixpercent=0 --readpercent=60 --reopen=0 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
$ ./db_stress --avoid_flush_during_recovery=1 --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --destroy_db_initially=0 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=10 --key_len_percent_dist=1,30,69 --max_bytes_for_level_base=4194304 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_write_fault_one_in=16 --ops_per_thread=1000 --prefix_size=-1 --prefixpercent=0 --readpercent=50 --sync=1 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
Verification failed for column family 0 key 000000000000001300000000000000857878787878 (1143): Value not found: NotFound:
Crash-recovery verification failed :(
...
```
- `make check -j48`
Reviewed By: ltamasi
Differential Revision: D31495388
Pulled By: ajkr
fbshipit-source-id: 7886ccb6a07cb8b78ad7b6c1c341ccf40bb68385
Summary:
Right now, the failure injection test for MultiGet() is not sufficient. Improve it with TestFSRandomAccessFile::MultiRead() injecting failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8925
Test Plan: Run crash test locally for a while.
Reviewed By: anand1976
Differential Revision: D31000529
fbshipit-source-id: 439c7e02cf7440ac5af82deb609e202abdca3e1f
Summary:
This allows the wrapper classes to own the wrapped object and eliminates confusion as to ownership. Previously, many classes implemented their own ownership solutions. Fixes https://github.com/facebook/rocksdb/issues/8606
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8618
Reviewed By: pdillinger
Differential Revision: D30136064
Pulled By: mrambacher
fbshipit-source-id: d0bf471df8818dbb1770a86335fe98f761cca193
Summary:
```FaultInjectionTestFS``` injects various types of read errors in ```FileSystem``` APIs. One type of error is corruption errors, where data is intentionally corrupted or truncated. There is corresponding validation in db_stress to verify that an injected error results in a user visible Get/MultiGet error. However, for corruption errors, its hard to know when a corruption is supposed to be detected by the user request, due to prefetching and, in case of direct IO, padding. This results in false positives. So remove that functionality.
Block checksum validation for Get/MultiGet is confined to ```BlockFetcher```, so we don't lose a lot by disabling this since its a small surface area to test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8616
Reviewed By: zhichao-cao
Differential Revision: D30074422
Pulled By: anand1976
fbshipit-source-id: 6a61fac18f95514c15364b75013799ddf83294df
Summary:
When DB Stress enables write failure in reopen, WAL files are also created with a wrapper writalbe file which buffers write until fsync. However, crash test currently expects all writes to WAL is persistent. This is at odd with the unsynced bytes dropped. To work it around temporarily, we disable WAL write failure for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8548
Test Plan: Run db_stress. Manual printf to make sure only WAL files are skipped.
Reviewed By: jay-zhuang
Differential Revision: D29745095
fbshipit-source-id: 1879dd2c01abad7879ca243ee94570ec47c347f3
Summary:
… small overwritten files.
If a file is overwritten with renamed and the parent path is not synced, FaultInjectionTestFS::DeleteFilesCreatedAfterLastDirSync() will delete the file. However, RocksDB relies on file renaming to be atomic no matter whether the parent directory is synced or not, and the current behavior breaks the assumption and caused some false positive: https://github.com/facebook/rocksdb/pull/8489
Since the atomic renaming is used in CURRENT files, to fix the problem, in FaultInjectionTestFS::DeleteFilesCreatedAfterLastDirSync(), we recover the state of overwritten file if the file is small.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8501
Test Plan: Run stress test for a while and see it doesn't break.
Reviewed By: anand1976
Differential Revision: D29594384
fbshipit-source-id: 589b5c2f0a9d2aca53752d7bdb0231efa5b3ae92
Summary:
```TestFSWritableFile``` buffers data in ```Append``` in order to simulate unsynced data loss on crash. This is only required for buffered IO and should be disabled for direct IO. Otherwise, it causes crash tests to assert on the buffer address alignment - ```db_stress: env/io_posix.cc:1194: virtual rocksdb::IOStatus rocksdb::PosixWritableFile::Append(const rocksdb::Slice&, const rocksdb::IOOptions&, rocksdb::IODebugContext*): Assertion `IsSectorAligned(data.data(), GetRequiredBufferAlignment())' failed.```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8490
Reviewed By: zhichao-cao
Differential Revision: D29565080
Pulled By: anand1976
fbshipit-source-id: 682831fd66ed3b9597caa74fc453e22dfaf9b973
Summary:
Inject read failures in DB reopen, just as what we do for metadata writes and writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8476
Test Plan: Some manual tests and make sure failures are triggered.
Reviewed By: anand1976
Differential Revision: D29507283
fbshipit-source-id: d04da0163973447041038bd87701686a417c4e0c
Summary:
Previously Stress can inject metadata write failures when reopening a DB. We extend it to file append too, in the same way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8474
Test Plan: manually run crash test with various setting and make sure the failures are triggered as expected.
Reviewed By: zhichao-cao
Differential Revision: D29503116
fbshipit-source-id: e73a446e80ccbd09301a579280e56ff949381fab
Summary:
In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead.
In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412
Test Plan: make check, add new testing cases.
Reviewed By: anand1976
Differential Revision: D29151545
Pulled By: zhichao-cao
fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Summary:
DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place.
If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully.
This option is enabled in crash test in half of the time.
Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235
Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory.
Reviewed By: anand1976
Differential Revision: D28010944
fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Inject the random write error to stress test, it requires set reopen=0 and disable_wal=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7653
Test Plan: pass db_stress and python3 db_crashtest.py blackbox
Reviewed By: ajkr
Differential Revision: D25354132
Pulled By: zhichao-cao
fbshipit-source-id: 44721104eecb416e27f65f854912c40e301dd669
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
FaultInjectionTestFS::NewDirectory currently asserts that the directory
creation on the target filesystem succeeds. This is actually not
guaranteed since there might be a legitimate I/O error when creating the
directory. The patch removes this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7220
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D22957990
Pulled By: ltamasi
fbshipit-source-id: b2e221320d8ce7235cb4897ef5936072412a25b6
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
