Summary: Splitting the makefile part of D55581.
Test Plan:
make all check -j32
ROCKSDB_FBCODE_BUILD_WITH_481=1 make all check -j32
ROCKSDB_NO_FBCODE=1 make all check -j32
export TBB_BASE=/mnt/gvfs/third-party2/tbb/afa54b33cfcf93f1d90a3160cdb894d6d63d5dca/4.0_update2/gcc-4.9-glibc-2.20/e9936bf;
ROCKSDB_NO_FBCODE=1 CFLAGS="-I $TBB_BASE/include" LDFLAGS="-L $TBB_BASE/lib -Wl,-rpath=$TBB_BASE/lib" make all check -j32
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: kradhakrishnan, yhchiang, IslamAbdelRahman, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56979
Summary:
We have replaced LEVELDB_PLATFORM_POSIX with ROCKSDB_PLATFORM_POSIX in our code
replace it in Makefile
Test Plan: make check
Reviewers: sdong, yiwu, andrewkr, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61365
Summary:
We may not have permission on all /dev/shm to fix the sticky bit.
Making the sticky bit fix advisory.
Test Plan: Run CI job locally
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61371
Summary: We rely on a basic evaluation logic: when using an expression `A || B`, the `B` part will only get evaluated when `A` fails. Therefore the task creation tool is guaranteed to run if previous build/test step failed. To indicate the correct return value to shell, the task creation tool will call `exit(1)` which will cause Sandcastle to mark it as a failure.
Test Plan:
- Land the changes.
- Trigger a RocksDB contrun - observe the results.
- Look at the results from the nightly runs and fix issues as necessary.
Current testing so far has been in isolation for various components.
Reviewers: andrewkr, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60909
Summary:
Removing moreutils from sandcastle and adding gnu parallel.
Then passing in J= nproc command
Test Plan: Testing on sandcastle
Reviewers: sdong, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61017
Summary: Increase test timeout to some tests to unblock CI.
Test Plan: watch how it runs.
Reviewers: kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61263
Summary:
Tsan crash white-box test was disabled because it never ends. Re-enable it with reduced killing odds.
Add a parameter in crash test script to allow we pass it through an environment variable.
Test Plan: Run it manually.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61053
Summary: RocksDB behavior is slightly different between data on tmpfs and normal file systems. Add a test case to run RocksDB on normal file system.
Test Plan: See the tests launched by Phabricator
Reviewers: kradhakrishnan, IslamAbdelRahman, gunnarku
Reviewed By: gunnarku
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60963
Summary: I tried on my host and TSAN black box test runs well. I didn't see any problem with white box crash test too but it chance of hitting crash point is too low that it may run almost forever. First re-enable black box crash test to unblock the job.
Test Plan: Run it locally.
Reviewers: kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60951
Summary: As Title.
Test Plan: See how the diff works.
Reviewers: kradhakrishnan, andrewkr, gunnarku
Reviewed By: gunnarku
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60933
Summary: To make sure that we'll have additional verification for release builds, define a new category and add `make release` to per-diff/post-commit tests. This should in theory prevent the release MyRocks integration builds breaks from happening.
Test Plan:
- `[p]arc diff --preview`
- Observe the execution in Sandcastle and make sure that release build and tests are executed.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60441
Summary: Fix two minor typos and update the file name which is used to trigger the runs in case new changes have been committed.
Test Plan: - Testing with a private Sandcastle instance.
Reviewers: sdong, mung
Reviewed By: mung
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59919
Summary:
The main PHP code churn is caused by extracting the common code from `FacebookArcanistConfiguration.php` and `FacebookOldArcanistConfiguration.php` into `RocksDBCommonDeterminator.php`. This is necessary both for reducing the duplication of code and making sure that we can execute the common core logic separately from continuous runs.
The main logic in `RocksDBCommonDeterminator.php` remains quite the same with the exception of some things:
- Adding separation between the cases when a diff is submitted //vs.// when the code is triggered from a continuous run. There are certain actions which we should do in a case of diff only.
- Adding reporting - now the person who authored the diff will receive e-mail notifications if any of the jobs have failed.
- Enabling assertions and making sure that we'll terminate on failure. This is an internal code used by competent engineers, so instead of `if (!condition) { echo "Something"; exit(1); }` for every invariant I think that `assert(condition)` provides better readability with the same behavior. Especially taking into account that we're talking about things which shouldn't ever happen.
Enabling this entire process will be triggered internally and will be a subject of a separate code review. We should discuss the details of triggering continuous RocksDB build and tests on that diff.
Test Plan:
- Make sure that `[p]arc diff` scenario isn't broken by verifying that tests validating this diff will pass.
- Private testing of triggering the continuous build script.
- Once the changes will land then author an internal job which will use the script and verify its validity.
Reviewers: sdong, yhchiang, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59811
Summary: current libgcc lib path is broken, update it and make sure the new one exists
Test Plan:
verify that the new path exists
make check -j64
Reviewers: yiwu, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59535
Summary: current clang_analyze path is broken, update it
Test Plan:
USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=64 analyze -j64
make sure it works
Reviewers: yiwu, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59505
Summary:
Added new features to help run the entire suite of tests on a diff
locally leveraging parallelism
Test Plan: Basic command line test
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59445
Summary:
Right now we use valgrind built with gcc-5-glibc-2.23 which keep generating this error everywhere
```
==3224756== Conditional jump or move depends on uninitialised value(s)
==3224756== at 0x401AD68: index (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4008933: _dl_map_object (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000ECC: map_doit (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x40101C7: _dl_catch_error (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000B34: do_preload (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x400458C: dl_main (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x40185DB: _dl_sysdep_start (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4004F39: _dl_start (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000CE7: ??? (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== Uninitialised value was created by a stack allocation
==3224756== at 0x4004519: dl_main (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756==
```
Test Plan: DISABLE_JEMALLOC=1 make valgrind_check -j64
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59343
Summary:
Update `build_tools/update_dependencies.sh` to use /mnt/gvfs path in dependencies.sh
This should prevent us from having errors because of changing the path of a compiler or a library
Test Plan:
make all -j64
USE_CLANG make all -j64
ROCKSDB_FBCODE_BUILD_WITH_481=1 make all -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59295
Summary: clang was removed from tp2 so change to llvm-fb.
Test Plan:
USE_CLANG=1 make all -j64
Reviewers: yhchiang, andrewkr, kradhakrishnan, sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59259
Summary: The path to g++ was outdated. Ran ./build_tools/update_dependencies.sh.
Test Plan: make -j64 all
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59229
Summary: Have sandcastle run unit test in lite mode for every diff.
Test Plan: seems sandcastle picked up changes here and running lite_test for this diff.
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57741
Summary: Warning is printed out with USE_CLANG=1 when including jemalloc.h. Disable it in that case.
Test Plan: Run db_bench with USE_CLANG=1 and not. Make sure they can all build and jemalloc status is printed out in the case where USE_CLANG is not set.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57399
Summary: It looks like we mistakenly enable JEMALLOC even if it's not available on the machine, that's why travis is failing
Test Plan:
check on my devserver
check on my mac
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57345
Summary:
Introduced option to dump malloc statistics using new option flag.
Added new command line option to db_bench tool to enable this
funtionality.
Also extended build to support environments with/without jemalloc.
Test Plan:
1) Build rocksdb using `make` command. Launch the following command
`./db_bench --benchmarks=fillrandom --dump_malloc_stats=true
--num=10000000` end verified that jemalloc dump is present in LOG file.
2) Build rocksdb using `DISABLE_JEMALLOC=1 make db_bench -j32` and ran
the same db_bench tool and found the following message in LOG file:
"Please compile with jemalloc to enable malloc dump".
3) Also built rocksdb using `make` command on MacOS to verify behavior
in non-FB environment.
Also to debug build configuration change temporary changed
AM_DEFAULT_VERBOSITY = 1 in Makefile to see compiler and build
tools output. For case 1) -DROCKSDB_JEMALLOC was present in compiler
command line. For both 2) and 3) this flag was not present.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57321
* Musl libc does not provide adaptive mutex. Added feature test for PTHREAD_MUTEX_ADAPTIVE_NP.
* Musl libc does not provide backtrace(3). Added a feature check for backtrace(3).
* Fixed compiler error.
* Musl libc does not implement backtrace(3). Added platform check for libexecinfo.
* Alpine does not appear to support gcc -pg option. By default (gcc has PIE option enabled) it fails with:
gcc: error: -pie and -pg|p|profile are incompatible when linking
When -fno-PIE and -nopie are used it fails with:
/usr/lib/gcc/x86_64-alpine-linux-musl/5.3.0/../../../../x86_64-alpine-linux-musl/bin/ld: cannot find gcrt1.o: No such file or directory
Added gcc -pg platform test and output PROFILING_FLAGS accordingly. Replaced pg var in Makefile with PROFILING_FLAGS.
* fix segfault when TEST_IOCTL_FRIENDLY_TMPDIR is undefined and default candidates are not suitable
* use ASSERT_DOUBLE_EQ instead of ASSERT_EQ
* When compiled with ROCKSDB_MALLOC_USABLE_SIZE UniversalCompactionFourPaths and UniversalCompactionSecondPathRatio tests fail due to premature memtable flushes on systems with 16-byte alignment. Arena runs out of block space before GenerateNewFile() completes.
Increased options.write_buffer_size.
Summary:
Added a python script to parse combined stdout/stderr of legocastle
steps. Previously we just matched words like 'Failure', which didn't work since
even our test names matched that pattern.
I went through all the legocastle steps to come up with strict failure regexes
for the common failure cases. There is also some more complex logic to present
gtest failures, since the test name and failure message are not on the same
line.
There will definitely be error cases that don't match any of these patterns, so
we can iterate on it over time.
Test Plan:
no end-to-end test. I ran the legocastle steps locally and piped to
my script, then verified output, e.g.,
$ set -o pipefail && TEST_TMPDIR=/dev/shm/rocksdb COMPILE_WITH_ASAN=1 OPT=-g make J=1 asan_check |& /usr/facebook/ops/scripts/asan_symbolize.py -d |& python build_tools/error_filter.py asan
==2058029==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200000a414 at pc 0x4c12f6 bp 0x7ffcfb7a0520 sp 0x7ffcfb7a0518
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56691
Summary:
proxy config tools are not available in sandcastle environment. Hard
coding the proxy information in the job.
Test Plan: Run manually
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56775
Summary:
Java build is downloading junit when not available. Without the proxy
settings exported that would not work.
Test Plan: Run manually
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56751
Summary: System was not able to locate javac
Test Plan: Run command manually and observe output
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56709
Summary:
Undefined Behavior Sanitizer (ubsan) is //a good thing// which will help us to find sneaky bugs with low cost. Please see http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/ for more details and official GCC documentation for more context: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html.
Changes itself are quite simple and pretty much imitating whatever is implemented for ASan.
Hooking the UBsan validation build to Sandcastle is a separate step and will be dealt as separate diff because code is in internal repository.
Test Plan: Make sure that that there no regressions when it comes to builds and test pass rate.
Reviewers: leveldb, sdong, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56049
Summary: Update jemalloc to newer versions, as well as some other dependencies. Only effective for FB internal.
Test Plan: See all tests run
Reviewers: IslamAbdelRahman, MarkCallaghan
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55947
Summary:
see https://github.com/facebook/rocksdb/issues/977; there are issues
with fallocate() on certain filesystems/kernel versions that can lead it to pre-
allocating blocks but never freeing them, even if they're unused.
Test Plan:
verified build commands omit DROCKSDB_FALLOCATE_PRESENT when this env
variable is set.
without disabling it:
$ ROCKSDB_NO_FBCODE=1 make -n env_test | grep -q DROCKSDB_FALLOCATE_PRESENT ; echo $?
0
with disabling it:
$ ROCKSDB_NO_FBCODE=1 DISABLE_FALLOCATE=1 make -n env_test | grep -q DROCKSDB_FALLOCATE_PRESENT ; echo $?
1
Reviewers: kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54069
Summary:
This patch update fbcode_config4.8.1.sh to get it's dependencies the same way we updated fbcode_config.sh in D53037
as a result zstd is upgraded to 0.4.7 instead of 0.4.5
Test Plan:
make clean && ROCKSDB_FBCODE_BUILD_WITH_481=1 make check -j64
make clean && ROCKSDB_FBCODE_BUILD_WITH_481=1 USE_CLANG=1 make check -j64
Reviewers: yhchiang, andrewkr, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53355
Summary:
This diff
- Include the rest of the dependencies (kernel-headers, binutils, valgrind) in dependencies.sh
- updtade zst to 0.4.7
- It also fix a problem in clang scan build
Test Plan:
make check
USE_CLANG=1 make check
USE_CLANG=1 make analyze
coverage_test.sh
Reviewers: sdong, yhchiang, rven, andrewkr, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53301
Summary:
Update fbcode_config.sh so that It try to use the latest version for dependencies that we are using, after updating the code these libraries where updated
```
Snappy: 1.0.3 => 1.1.3
GFLAGS: 1.6 => 2.1.1
JEMALLOC: 3.6.0 => 4.0.3
```
I have also updated clang from 3.7 to 3.7.1
```
Clang 3.7 => 3.7.1
```
Another change is that we use the same tp2 directory as fbcode, so we dont need to keep changing commit hash every time we need to change a version of a compiler or a library
Test Plan:
make check -j64
USE_CLANG=1 make check -j64
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32 (make sure it's running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53037
Summary: This patch provides a mechanism to run pre commit tests on the local
branch before committing. This can help prevent frequent build breaks.
The tests can be run in parallel by specifying the J=<..> environment
variable.
Test Plan: Run manually
Reviewers: sdong rven tec
CC: leveldb@
Task ID: #9689218
Blame Rev:
These simple changes are required to allow builds on ppc64[le] systems
consistent with X86. The Makefile now recognizes both ppc64 and ppc64le, and
in the absence of PORTABLE=1, the code will be built analogously to the X86
-march=native.
Note that although GCC supports -mcpu=native -mtune=native on POWER, it
doesn't work correctly on all systems. This is why we need to get the actual
machine model from the AUX vector.
Summary: update internal build scripts to use zstd 0.4.5.
Test Plan: built and ran tests with and without ROCKSDB_FBCODE_BUILD_WITH_481
Reviewers: yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52833
Summary:
1) changes tools/{benchmark,run_flash_bench}.sh to optionally use the write rate limit
2) removes code for --writes_per_second and switches the 'background' write rate limit
to use --benchmark_write_rate_limit
Replaces https://reviews.facebook.net/D49113
Task ID: #9555881
Blame Rev:
Test Plan:
tools/run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52485
Summary: After removing two move operations, we can make CLANG 3.7 build pass under GCC 4.8.1.
Test Plan: USE_CLANG=1 ROCKSDB_FBCODE_BUILD_WITH_481=1 make all -j32
Reviewers: yhchiang, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52365
Summary:
It was already built in third-party2 but the include/library paths in
rocksdb hadn't been updated accordingly.
Test Plan:
verified build works
$ make clean && make -j32 all
$ make clean && USE_CLANG=1 make -j32 all
Reviewers: cyan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52299
Summary: Improving the parser string to make better error report. Currently the
error report fails to capture the assert details. This fix addresses the issue.
Test Plan: None
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: fb build for gcc 4.8.1 is broken for the ZSTD dependency is not fixed after ea11923550. Fixing it.
Test Plan: ROCKSDB_FBCODE_BUILD_WITH_481=1 make -j40 OPT=-g
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51741
Summary: Change to call the new compression function.
Test Plan: build and run db_bench with the compression to make sure it compresses.
Reviewers: anthony, rven, kradhakrishnan, IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51603
Summary: Upgrade version of some dependencies in build_tools/fbcode_config4.8.1.sh. I didn't upgrade version for CLANG because some warnings are shown.
Test Plan:
build:
ROCKSDB_FBCODE_BUILD_WITH_481=1 USE_CLANG=1 make all -j32
as well as
ROCKSDB_FBCODE_BUILD_WITH_481=1 make all -j32
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: igor, kradhakrishnan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51003
Add sequential rerun for any failed tests. Add env_test case.
Limit concurrency
Allow to specify individual tests
Take $Limit into account when displaying number of tests
Summary:
Reverting c745f1d2c4 because it
was based on an incorrect understanding of the correct way to enable
TSAN tests (it assumes "make COMPILE_WITH_TSAN=1 check" but in fact only
"COMPILE_WITH_TSAN=1 make check" is supported).
Test Plan: COMPILE_WITH_TSAN=1 make check
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50445
Summary:
TSAN builds for gcc 4.9 need a PIC version of the libraries
taken from the fbcode platform. This is accomplished by assuming every
.a has a _pic.a sibling, and by fixing the third-party2 zlib build.
Test Plan: make COMPILE_WITH_TSAN=1 check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50331
PowerShell seems to have a hard time when a flood of async tasks is
scheduled at the same time.
I speculated that WaitForMultipleObjects() in Windows can only take up
to 64 process handles and if you want to handle more than you should write
some additional code which can be sub-optimal. I.e to implement Wait-Job -Any.
I decided to test that suggestion and introduced a $Concurrency parameter with a default value of 62.
So in the new version the script fires up up to $Concurrency value
and wait for anything to complete before starting any more processes.
This improved matters greatly. Individual tests against ramdrive now
run in 8 minutes and all of the 200+ db_tests run in 9 minutes with concurrency
values of 8-16. About 48 is required to load a CPU on my box running against HD
but that does not improve running times much.
Other changes include respect -EnableJE for the individual test exes.
Enforce exclusions for the individual tests.
Summary: As title. Let's run it for 1 hour.
Test Plan: How can I test legocastle changes?
Reviewers: IslamAbdelRahman, yhchiang, rven, sdong, anthony, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49653
Summary: Update rocksdb-lego-determinator to include running make check under ROCKSDB_LITE
Test Plan: will be tested after landing in fbcode
Reviewers: sdong, yhchiang, igor, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D49065
Summary: This patch splits the posix storage backend into Env and
the actual *File implementations. The motivation is to allow other Envs
to use posix as a library. This enables a storage backend different from
posix to split its secondary storage between a normal file system
partition managed by posix, and it own media.
Test Plan: No new functionality is added to posix Env or the library,
thus the current tests should suffice.
Summary: Adding the ability to upload logs and db content to storage after the
completion of the job
Test Plan: Manual run
Reviewers:
CC: leveldb@
Task ID: #8754201
Blame Rev:
Summary: The parser will help parse the output in order to send meaningful
notifications.
Test Plan: Manual testing
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
in the Java jar. Also build the linux libraries using the portable flag to fix a problem with
the linux32 build and improve the general portability of the RocksDB dynamic libraries.
==> linux32: util/crc32c.cc:318:39: error: ‘_mm_crc32_u64’ was not declared in this scope
Summary: unity_test will compile db_test with unity.a instead of librocksdb.a. This will test both the compilation and some small amount of runtime.
Test Plan: This is a test :)
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48297
Summary: Sandcastle does not raise a task if assignee is specified. Removing the
assignee will force the system to use the oncall.
Test Plan: Manual
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Added following capability
(1) Ability to do configurable reports using args
(2) Support to generating a task on failure
(3) Ability to configure email trigger condition
Test Plan: Manual testing
Reviewers:
CC:leveldb@
Task ID: #6968635
Blame Rev:
Introduce proper command line arguments so we can control the script
Add appveyor support
Add an ability to run all other (non db_tests) test executables in parallel
Use .NET HashSet instead of empty valued hashtable to improve the looks
TODO: Some of the tests do not use GTests and need to improve log parsing
This commit adds two new targets to the Makefile: rocksdb.cc and rocksdb.h
These files, when combined with the c.h header, are a self-contained RocksDB
source distribution called an amalgamation. (The name comes from SQLite's, which
is similar in concept.)
The main benefit of an amalgamation is that it's very easy to drop into a
new project. It also compiles faster compared to compiling individual source
files and potentially gives the compiler more opportunity to make optimizations
since it can see all functions at once.
rocksdb.cc and rocksdb.h are generated by a new script, amalgamate.py.
A detailed description of how amalgamate.py works is in a comment at the top of
the file.
There are also some small changes to existing files to enable the amalgamation:
* Use quotes for includes in unity build
* Fix an old header inclusion in util/xfunc.cc
* Move some includes outside ifdef in util/env_hdfs.cc
* Separate out tool sources in Makefile so they won't be included in unity.cc
* Unity build now produces a static library
Closes#733
Add an optimized build config switch for faster test runs
Change compiler options to introduce more opitmizations and be more inline with MS internal switches.
Make appveyor build to utilize all the avaiable cores on the VM (parallel)
Introduce new appveyor configuration for daily test runs as it would take too long
to run db_test after each checkin even in paralell.
With some exclusions we make it in 38 minutes. We currently fail to install ramdisk during the build.
Add a powershell script to faicilitate paralell run for db_test cases.
Summary: Added email notification for a few jobs and fixed a bug in
no_compression script
Test Plan: Manual test
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Our valgrind testing is buggy and cumbersome in terms of locating the
error. It originates from the fact we accumulate all output for the tests. It is
extremely hard to locate the point of error.
The communication between valgrind and the script is not sturdy. We are
experiencing bugs.
Simplifying to stop on first error.
Test Plan: Run manually
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: The job errors with log print step. Removing the step and re-enabling
the test case.
Test Plan: Manual test run
Reviewers:
CC: levledb@
Task ID: #6968635
Blame Rev:
Summary: Parallel test CI is failing. Reducing noise by temporarily disabling
the job
Test Plan: Manual
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Long running jobs are blocking the queue due to lack of adequate
machines in the CI
Test Plan: Manual testing
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: The approach to serialize long scripts as string is flawed. Instead
adding args to invoke the long scripts.
Test Plan: Manual test
Reviewers:
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Migrating the long script jobs and the left overs from Jenkin.
Test Plan: Run command manually
Reviewers: sdon igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Command level timeouts are not working. Moving it to step level.
Test Plan: Manual testing sending commands
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Fixed
- Added timeouts for crash tests. They take around 9hrs.
- Added oncall so we can get notifications for timeout etc.
- Fixed a bug in the valgrind script
- Cosmetic fix
Test Plan: Manual run
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Fix the issue where compilation error will not result in log file not
found error
Test Plan: None
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Added more jobs and refactored code express the jobs more cleanly
Test Plan: Manual test
Reviewers: igor sdong
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Dropping parallel compilation since that seen to introduce compilation
errors spuriously
Test Plan: Run the command manually
Reviewers: sdon igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: The email notifications needs to be at command level and the job level.
Adding command level notification.
Test Plan: Run command manually
Reviewers: igor sdong
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Fixed the glitch in Sandcastle and added gcc-4.9 support. Moving the
jobs to 4.9
Test Plan: Manually run the script
Reviewers: sdon igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: Added commands to spawn crash, stress, asan, asan_crash, clang CI jobs
Test Plan: Manual test
Reviewers: sdong
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary: This fuels commands to be executed for different sandcastle jobs. This is a nice way to separate RocksDB specific commands from Sandcastle specific job definition.
Test Plan: None. Will be tested when we add Sandcastle job.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45741
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
MyRocks is using jemalloc latest version, not 3.6.0.
Combining multiple versions (3.6.0 in RocksDB and latest in MyRocks)
broke some features -- for example, getting SIGSEGV when heap profiling
was enabled.
This diff switches to use jemalloc latest, if
env variable ROCKSDB_FBCODE_BUILD_WITH_481=1 was set.
My understanding is this env was used by MyRocks only so it would be
safe to change.
Test Plan: building MyRocks then verified jemalloc heap profiling worked
Reviewers: igor, rven, yhchiang, jtolmer, maykov, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43479
Summary: Copy change from D37533 to gcc 4.8.1 config
Test Plan: make db_bench, `ldd db_bench`, try running it
Reviewers: MarkCallaghan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40845
Summary: Based on @anthony's feedback, we want to fail early if our static linking fails.
Test Plan: none
Reviewers: anthony
Reviewed By: anthony
Subscribers: dhruba, anthony, leveldb
Differential Revision: https://reviews.facebook.net/D40839
Summary:
Currently, when we insert something into block cache, we say that the block cache capacity decreased by the size of the block. However, size of the block might be less than the actual memory used by this object. For example, 4.5KB block will actually use 8KB of memory. So even if we configure block cache to 10GB, our actually memory usage of block cache will be 20GB!
This problem showed up a lot in testing and just recently also showed up in MongoRocks production where we were using 30GB more memory than expected.
This diff will fix the problem. Instead of counting the block size, we will count memory used by the block. That way, a block cache configured to be 10GB will actually use only 10GB of memory.
I'm using non-portable function and I couldn't find info on portability on Google. However, it seems to work on Linux, which will cover majority of our use-cases.
Test Plan:
1. fill up mongo instance with 80GB of data
2. restart mongo with block cache size configured to 10GB
3. do a table scan in mongo
4. memory usage before the diff: 12GB. memory usage after the diff: 10.5GB
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40635
Summary: If we create a new temp directory for each build, scons will recompile everything because we have different parameters. Instead, let's set up a constant path to our static lib. That way we won't have to recompile.
Test Plan: Run fb_compile_mongo.sh twice -- second time it didn't recompile everything
Reviewers: MarkCallaghan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40707
Summary:
Added a script that will compile MongoRocks with the same flags as RocksDB binary. On FB infra, we can now do:
cd ~/rocksdb; make static_lib
cd ~/mongo; ~/rocksdb/build_tools/fb_compile_mongo.sh
No need to upgrade the g++ on the devbox (like Aaron and I did) or maintain a separate script to compile (like Mark did)
fb_compile_mongo.sh gets the settings from fbcode_config.sh, so it also makes it easier to upgrade the environment one day.
Test Plan: Compiled mongod with new script. Also, ldd output looks good: https://phabricator.fb.com/P19891602
Reviewers: AaronFeldman, MarkCallaghan, anthony
Reviewed By: anthony
Subscribers: anthony, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40659
Summary:
Remove -Wl,--no-as-needed flag when making shared_lib in OSX and IOS as
those environment doe not have compile option --no-as-needed
ld: unknown option: --no-as-needed
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Test Plan: make shared_lib
Reviewers: meyering, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40353
Summary:
Cygwin doesn't support -fPIC. Remove it.
Not sure whether we can build shared library in Cygwin but at least it can build without warning.
Test Plan: Build under Cygwin
Reviewers: yhchiang, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40077
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary: Currently open source rocksdb only builds with tcmalloc. This diff first checks if jemalloc is available. If it is, it compiles with jemalloc. If it isn't, it checks for tcmalloc.
Test Plan: Tried this out on my Ubuntu virtual machine and confirms that jemalloc is correctly detected and compiled.
Reviewers: MarkCallaghan, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36789
Summary:
This lets the production toolchain libraries get used on devservers and
in production.
Task ID: #6849362
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37533
Summary: `echo` correctly interpretes \n on mac, but not on linux. On linux you have to give it `-e` to interpret \n. Unfortunately, `-e` options is not available on Mac. Go back to old way of checking gflags
Test Plan: build_tools/build_detect_platform on mac and linux
Reviewers: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37515
Summary: We should send error output to /dev/null
Test Plan: none
Reviewers: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37449
Summary:
If the system has gflags with both `google` and `gflags` namespaces installed, we try to define GFLAGS as two things. This breaks the compile.
Fix: Use `else if` -- try compiling with `google` namespace only if compile with `gflags` failed
Test Plan: build_tools/build_detect_platform correctly identifies gflags
Reviewers: lgalanis
Reviewed By: lgalanis
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37389
On Centos 6, you need to explicitely include linux/falloc.h which is
whele the FALLOC_FL_* flags are defined. Otherwise, the fallocate()
support test defined in build_detect_platform will fail.
Signed-off-by: Pooya Shareghi <shareghi@gmail.com>
Summary: I don't think we need to use whole-archive to include jemalloc. This change only affects our development builds -- it does not affect our open source builds (which don't support jemalloc) or our fbcode third-party2 builds (which use open-source build codepaths).
Test Plan:
make
verify that jemalloc is running by running `MALLOC_CONF="prof:true" ./cache_test` and observing that file was created
Reviewers: MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36783
Summary:
As described in https://github.com/facebook/rocksdb/issues/563, we should add minor version to SONAME, since we break ABI with minor releases.
I also turned PLATFORM_SHARED_VERSIONED to true by default. This is true in LevelDB and it was switched to false by D15117 for no apparent reason. It should only be false for iOS.
Test Plan: `make shared_lib` produced librocksdb.dylib.3.10.0
Reviewers: sdong, yhchiang, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36573
Summary:
After this diff, when a user submits a diff from Facebook's VPN
network, we'll automatically trigger a jenkins test. Once jenkins test
is done, we'll update the diff with test results.
Test Plan:
Made sure that jenkins build is triggered on `arc diff` and
that result is reflected back on the diff
Reviewers: sdong, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36555
Summary: After you run `arc diff`, just run `build_tools/trigger_jenkins_test.sh` and Jenkins will test your diff!
Test Plan: Triggered a build to jenkins
Reviewers: sdong, rven, IslamAbdelRahman, anthony, yhchiang, meyering
Reviewed By: meyering
Subscribers: meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36021
Summary:
changed make unity target to use $LIB_SOURCES as a source of library source code. In the old way (using find) table/mock_table.h was added to a list of library objects and this was a course of `make unity` break.
`build_tools/unity` contains some redundant code, I deleted it and moved the functionality in the Makefile.
Test Plan:
Make sure unity completes with no errors.
```lang=bash
% make unity
```
Reviewers: sdong, rven, igor, meyering
Reviewed By: igor, meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35385
Summary: Updated reference to the latest clang dev in fbcode. Since RocksDB already uses recent version of clang dev no code changes need.
Test Plan:
Make sure can be build with clang.
```lang=bash
% USE_CLANG=1 make all
```
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35121
Summary:
One of the commands in the script make_new_version.sh was
incorrect. Fixed it.
Test Plan: Try the script out to verify that it works.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34791
Summary:
Any time one would modify a dependent of any *test*.cc file,
"make" would fail to rebuild the affected test binaries,
e.g., db_test. That was due to the fact that we deliberately
excluded those test-related files from the definition of SOURCES
and only $(SOURCES) was used to create the automatically-generated
.d dependency files. The fix is to generate a .d file for every
source file.
* src.mk: New file. Defines LIB_SOURCES, MOCK_SOURCES
and TEST_BENCH_SOURCES.
* Makefile: Include src.mk.
Reflect s/SOURCES/LIB_SOURCES/ renaming.
* build_tools/build_detect_platform: Remove the code
that was used to generate SOURCES= and MOCK_SOURCES=
definitions in make_config.mk. Those lists of files
are now hard-coded in src.mk. Hard-coding this list of
sources is desirable, because without that, one risks
including stray .cc files in a build. Not reproducible.
Test Plan:
Touch a file used by db_test's dependent .o files and ensure that
they are all recompiled. Before, none would be:
$ touch db/db_impl.h && make db_test
CC db/db_test.o
CC db/column_family.o
CC db/db_filesnapshot.o
CC db/db_impl.o
CC db/db_impl_debug.o
CC db/db_impl_readonly.o
CC db/forward_iterator.o
CC db/internal_stats.o
CC db/managed_iterator.o
CC db/repair.o
CC db/write_batch.o
CC utilities/compacted_db/compacted_db_impl.o
CC utilities/ttl/db_ttl_impl.o
CC util/ldb_cmd.o
CC util/ldb_tool.o
CC util/sst_dump_tool.o
CC util/xfunc.o
CCLD db_test
Reviewers: ljin, igor.sugak, igor, rven, sdong
Reviewed By: sdong
Subscribers: yhchiang, adamretter, fyrz, dhruba
Differential Revision: https://reviews.facebook.net/D33849
Summary:
This patch will update the Makefile and source code so that we can build RocksDB successfully on FreeBSD 10 and 11 (64-bit and 32-bit)
I have also encountered some problems when running tests on FreeBSD, I will try to fix them individually in different diffs
Notes:
- FreeBSD uses clang as it's default compiler (http://lists.freebsd.org/pipermail/freebsd-current/2012-September/036480.html)
- GNU C++ compiler have C++ 11 problems on FreeBSD (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=193528)
- make is not gmake on FreeBSD (http://www.khmere.com/freebsd_book/html/ch01.html)
Test Plan:
Using VMWare Fusion Create 4 VM machines (FreeBSD 11 64-bit, FreeBSD 11 32-bit, FreeBSD 10 64-bit, FreeBSD 10 32-bit)
- pkg install git gmake gflags archivers/snappy
- git clone https://github.com/facebook/rocksdb.git
- apply this patch
- setenv CXX c++
- setenv CPATH /usr/local/include/
- setenv LIBRARY_PATH /usr/local/lib/
- gmake db_bench
- make sure compilation is successful and db_bench is running
- gmake all
- make sure compilation is successful
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33891
Summary: Current clang path in fbcode points to clang 3.5. This diff updates clang path to clang 3.7.
Test Plan:
Make sure clang 3.7 is in use and all tests are passing.
```lang=bash
% USE_CLANG make check
```
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34119
Summary:
This changes the RocksDB build to share headers provided by MongoDB. It is invoked as:
ROCKSDB_FOR_MONGO=/path/to/mongodb/root make static_lib
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34071
Summary:
Prior to this change, "make check" would always waste a lot of
time relinking 60+ binaries. With this change, it does that
only when the generated file, util/build_version.cc, changes,
and that happens only when the date changes or when the
current git SHA changes.
This change makes some other improvements: before, there was no
rule to build a deleted util/build_version.cc. If it was somehow
removed, any attempt to link a program would fail.
There is no longer any need for the separate file,
build_tools/build_detect_version. Its functionality is
now in the Makefile.
* Makefile (DEPFILES): Don't filter-out util/build_version.cc.
No need, and besides, removing that dependency was wrong.
(date, git_sha, gen_build_version): New helper variables.
(util/build_version.cc): New rule, to create this file
and update it only if it would contain new information.
* build_tools/build_detect_platform: Remove file.
* db/db_impl.cc: Now, print only date (not the time).
* util/build_version.h (rocksdb_build_compile_time): Remove
declaration. No longer used.
Test Plan:
- Run "make check" twice, and note that the second time no linking is performed.
- Remove util/build_version.cc and ensure that any "make"
command regenerates it before doing anything else.
- Run this: strings librocksdb.a|grep _build_.
That prints output including the following:
rocksdb_build_git_date:2015-02-19
rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33591
Summary:
Added new target ##make analyze## into Makefile. This command runs clang static analyzer and builds the sources as ##make all##. The result report is put into ##$(RocksDbSourceRoot)/can_build_report/##
If the development environment is a Facebook devserver and ##ROCKSDB_NO_FBCODE## is not set, then scan-build is used from fbcode. If it is run not on a Facebook devserver, scan-build should be available in ##$PATH##. I'll add details to wiki how to install scan-build on a non Facebook devserver environment.
Test Plan:
Run the fallowing commands on a Facebook devserver and Mac OS, and ensure no build or test errors.
```
% make all check -j32
% make clean
% USE_CLANG=1 make all -j32
% make analyze
% USE_CLANG=1 make analyze
```
Reviewers: sdong, lgalanis, leveldb, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32799
Summary: This was a feature request by osquery. See task t5617758
Test Plan: compiles and memenv_test runs
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32115
Summary: Update the comment for the removal of mac-install-gflags.sh
Test Plan: n/a
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32295
Summary: We need this because we build MySQL with 4.8.1.
Test Plan: ROCKSDB_FBCODE_BUILD_WITH_481=1 make check
Reviewers: sdong, yhchiang, rven, yoshinorim
Reviewed By: yoshinorim
Subscribers: jonahcohen, yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32073
Summary: When you compile with COMPILE_WITH_TSAN=1, we will compile the code with -fsanitize=thread. This will resolve bunch of data race issues we might have.
Test Plan: COMPILE_WITH_TSAN=1 m db_test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32019
Summary:
Upgrade gcc to 4.9.1 and clang to dev.
With new compilers I succeeded to run thread sanitizer, too. I'll post output (doesn't look good) and fix some things in separate diffs.
Test Plan: compiles with both g++ and clang
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32007
Summary:
This diff changes compile to optimize for native platform by default. This will automatically turn on crc32 optimizations for modern processors, which greatly improves rocksdb's performance.
I also did some more changes to compilation documentation.
Test Plan:
compile with `make`, observe -march=native
compile with `PORTABLE=1 make`, observe no -march=native
Reviewers: sdong, rven, yhchiang, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30225
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
Only one more try, I promise.
I talked to Jim and he mentioned that if we include our system includes with -isystem rather than with -I, that signals to the compile that those are system includes and thus no warnings are issued. So I turned our glibc includes into system includes and now we no longer get the warning from there, making us shadow-warning-free!
Test Plan: compiles with both clang and gcc
Reviewers: sdong, yhchiang, rven, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28479
Summary:
This diff is revamping our build tools:
1) Use third-party2 instead of third-party
2) consolidate clang and gcc scripts together, lots of duplication there
3) remove hdfs libs, we never compile rocksdb with them
clang compilation doesn't work yet. It doesn't work in master either. I plan to fix it soon, but I just spent 2 hours trying to make it work and failed. I'll ask experts.
Test Plan: compiles with gcc
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28047
Summary: as title
Test Plan: build with mock_env_test.cc
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28107
Summary:
This diff replaces BlockBasedTable in flush_job_test with TableMock, making it depend on less things and making it closer to an unit test than integration test.
It also introduces a framework to compile mock classes -- Any file named *mock.cc will not be compiled into the build. It will only get compiled into the tests. What way we can mock out most other classes, Version, VersionSet, DBImpl, etc.
Test Plan: flush_job_test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27681
Summary: RocksDB already depends on C++11, so we might as well all the goodness that C++11 provides. This means that we don't need AtomicPointer anymore. The less things in port/, the easier it will be to port to other platforms.
Test Plan: make check + careful visual review verifying that NoBarried got memory_order_relaxed, while Acquire/Release methods got memory_order_acquire and memory_order_release
Reviewers: rven, yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D27543
Summary:
Before this diff, there are two places with rocksdb versions. After the diff:
1. we only have one source of truth for rocksdb version
2. we have a script that we can use to get the version that we can use in other compilations (java, go, etc).
Test Plan: make
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24333
Summary:
I put together a script to assist in the generation of deb's and
rpm's. I've tested that this works on ubuntu via vagrant. I've included the
Vagrantfile here, but I can remove it if it's not useful. The package.sh
script should work on any ubuntu or centos machine, I just added a bit of
logic in there to allow a base Ubuntu or Centos machine to be able to build
RocksDB from scratch.
Example output on Ubuntu 14.04:
```
root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh
[+] g++-4.7 is already installed. skipping.
[+] libgflags-dev is already installed. skipping.
[+] ruby-all-dev is already installed. skipping.
[+] fpm is already installed. skipping.
Created package {:path=>"rocksdb_3.5_amd64.deb"}
root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb
new debian package, version 2.0.
size 17392022 bytes: control archive=1518 bytes.
275 bytes, 11 lines control
2911 bytes, 38 lines md5sums
Package: rocksdb
Version: 3.5
License: BSD
Vendor: Facebook
Architecture: amd64
Maintainer: rocksdb@fb.com
Installed-Size: 83358
Section: default
Priority: extra
Homepage: http://rocksdb.org/
Description: RocksDB is an embeddable persistent key-value store for fast storage.
```
Example output on CentOS 6.5:
```
[root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm
Name : rocksdb Relocations: /usr
Version : 3.5 Vendor: Facebook
Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC
Install Date: (not installed) Build Host: localhost
Group : default Source RPM: rocksdb-3.5-1.src.rpm
Size : 96231106 License: BSD
Signature : (none)
Packager : rocksdb@fb.com
URL : http://rocksdb.org/
Summary : RocksDB is an embeddable persistent key-value store for fast storage.
Description :
RocksDB is an embeddable persistent key-value store for fast storage.
```
Test Plan:
How this gets used is really up to the RocksDB core team. If you
want to actually get this into mainline, you might have to change `make
install` such that it install the RocksDB shared object file as well, which
would require you to link against gflags (maybe?) and that would require some
potential modifications to the script here (basically add a depends on that
package).
Currently, this will install the headers and a pre-compiled statically linked
object file. If that's what you want out of life, than this requires no
modifications.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Differential Revision: https://reviews.facebook.net/D24141
Summary: I want to use open source build rather than fbcode one. This enables me to run `ROCKSDB_NO_FBCODE=1 make` and run it with my system g++.
Test Plan:
ROCKSDB_NO_FBCODE=1 make
make
Reviewers: sdong, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23613
Summary:
That way we can see when this graph goes up and be happy.
Couple of changes:
1. title
2. fix db_bench to delete column families before deleting the DB. this was asserting when compiled in debug mode
3. don't sync manifest when disableDataSync. We discussed this offline. I can move it to separate diff if you'd like
Test Plan: ran it
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22815
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary:
Fixed some make and linking issues of RocksDBJava. Specifically:
* Add JAVA_LDFLAGS, which does not include gflags
* rocksdbjava library now uses JAVA_LDFLAGS instead of LDFLAGS
* java/Makefile now includes build_config.mk
* rearrange make rocksdbjava workflow to ensure the library file is correctly
included in the jar file.
Test Plan:
make rocksdbjava
make jdb_bench
java/jdb_bench.sh
Reviewers: dhruba, swapnilghike, zzbennett, rsumbaly, ankgup87
Reviewed By: ankgup87
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20289
Summary:
Changes:
- Adding numa_aware flag to db_bench.cc
- Using numa.h library to bind memory and cpu of threads to a fixed NUMA node
Result: There seems to be no significant change in the micros/op time with numa_aware enabled. I also tried this with other implementations, including a combination of pthread_setaffinity_np, sched_setaffinity and set_mempolicy methods. It'd be great if someone could point out where I'm going wrong and if we can achieve a better micors/op.
Test Plan:
Ran db_bench tests using following command:
./db_bench --db=/mnt/tmp --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=/mnt/tmp --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --duration=300 --benchmarks=readwhilewriting --use_existing_db=1 --num=157286400 --threads=24 --writes_per_second=10240 --numa_aware=[False/True]
The tests were run in private devserver with 24 cores and the db was prepopulated using filluniquerandom test. The tests resulted in 0.145 us/op with numa_aware=False and 0.161 us/op with numa_aware=True.
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin, igor
Subscribers: igor, leveldb
Differential Revision: https://reviews.facebook.net/D19353
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
collect in-memory workload get/seek metrics so that we can alert on
regression
Test Plan: ran locally
Reviewers: igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18969
Summary:
388d2054c7
added extra line to db_bench output, breaking regression tests. This diff makes it more robust and fixes the issue
Test Plan: ran it
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18897
Summary:
Newer gflags switched from `google` namespace to `gflags` namespace. See: https://github.com/facebook/rocksdb/issues/139 and https://github.com/facebook/rocksdb/issues/102
Unfortunately, they don't define any macro with their namespace, so we need to actually try to compile gflags with two different namespace to figure out which one is the correct one.
Test Plan: works in fbcode environemnt. I'll also try in ubutnu with newer gflags
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18537
Summary: We have a lot of problems with gflags. However, when compiling rocksdb static library, we don't need gflags dependency. Reorganize INSTALL.md such that first-time customers don't need any dependency installed to actually build rocksdb static library.
Test Plan: none
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18501
Summary:
There are some projects in fbcode that define lz4 dependency on r108. We, however, defined dependency on r117. That produced some interesting issues and our build system was not happy.
This diff makes rocksdb work with both r108 and r117. Hopefully this will fix our problems.
Test Plan: compiled rocksdb with both r108 and r117 lz4
Reviewers: dhruba, sdong, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18465
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
I had to make number of changes to the code and Makefile:
* Add `make lib`, that will create static library without debug info. We need this to avoid growing binary too much. Currently it's 14MB.
* Remove cpuinfo() function and use __SSE4_2__ macro. We actually used the macro as part of Fast_CRC32() function.
As a result, I also accidentally fixed this issue: https://www.facebook.com/groups/rocksdb.dev/permalink/549700778461774/?stream_ref=2
* Remove __thread locals in OS_MACOSX
Test Plan: `make lib PLATFORM=IOS`
Reviewers: ljin, haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17475
Summary:
Added an option for readrandom benchmark to run with tailing iterator instead of Get. Benefit of tailing iterator is that it doesn't require locking DB mutex on access.
I also have some results when running on my machine. The results highly depend on number of cache shards. With our current benchmark setting of 4 table cache shards and 6 block cache shards, I don't see much improvements of using tailing iterator. In that case, we're probably seeing cache mutex contention.
Here are the results for different number of shards
cache shards tailing iterator get
6 1.38M 1.16M
10 1.58M 1.15M
As soon as we get rid of cache mutex contention, we're seeing big improvements in using tailing iterator vs. ordinary get.
Test Plan: ran regression test
Reviewers: dhruba, haobo, ljin, kailiu, sding
Reviewed By: haobo
CC: tnovak
Differential Revision: https://reviews.facebook.net/D15867
Summary: Change all occurrences of "rocksdb" to its canonical form "RocksDB".
Test Plan: N/A
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15549
Summary:
* Add a change log for rocksdb releases.
* Remove the hacky parts of make_new_version.sh, which are either
no longer useful or will be done in our dedicated 3rd-party release
tool.
Test Plan: N/A
Reviewers: igor, haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15543
Summary:
It looks like we might have some trouble when building the new release with 4.8, since fbcode is using glibc2.17-fb by default and we are using glibc2.17. It was reported by Benjamin Renard in our internal group.
This diff moves our fbcode build to use glibc2.17-fb by default. I got some linker errors when compiling, complaining that `google::SetUsageMessage()` was undefined. After deleting all offending lines, the compile was successful and everything works.
Test Plan:
Compiled
Ran ./db_bench ./db_stress ./db_repl_stress
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15405
Summary:
* make sure when some pre-check fails, the script won't halt immediately.
* change fburl to google's short url.
* Fix a bug in this script: now it checks the uncommitted code only.
Test Plan: Ran the script under differnet environments.
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15231
Summary:
Added a script that reformat only the affected lines in a given diff.
I planned to make that file as pre-commit hook but looks it's a little bit more difficult than I thought. Since I don't want to spend too much time on this task right now, I eventually added a "make command" to achieve this with a few additional key strokes.
Also make the clang-format solely inherited from Google's style -- there are still debates on some of the style issues, but we can address them later once we reach a consensus.
Test Plan: Did some ugly format change and ran "make format", all affected lines are formatted as expected.
Reviewers: igor, sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15147
Summary:
Per request, some users need to use dynamic rocksdb library instead of static one.
However currently the dynamic libraries have to be manually compiled by default, which is inconvenient. I made dymamic libraries to be compiled by default.
Test Plan: make clean; make; make clean;
Reviewers: haobo, sdong, dhruba, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15117
Summary:
Added readwhilewriting benchmark to our regression tests.
Changed block cache shards from 16 to 64, as Mark found that cache mutex contention is a big bottleneck.
Test Plan: Ran it.
Reviewers: dhruba, haobo, MarkCallaghan, xjin
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15075
Summary: Added a script that prepares the repo for facebook's new rocksdb release, which will automatically do some necessary work to make sure this repo is ready for 3rdparty release.
Test Plan:
Run this script and observed:
* new version was created (both in local and remote repo) as a git tag.
* build_version.cc was updated
* build_detect_platform was changed so that it won't create any new change.
Reviewers: haobo, dhruba, sdong, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15003
Summary: @MarkCallaghan's tests indicate that performance with 8k rows in memtable is much worse than empty memtable. I wanted to add a regression tests that measures this effect, so we could optimize it. However, current config shows 634461 QPS on my devbox. Mark, any idea why this is so much faster than your measurements?
Test Plan: Ran the regression test.
Reviewers: MarkCallaghan, dhruba, haobo
Reviewed By: MarkCallaghan
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D14511
Branch detection did not work in Jenkins. I realized that it set
GIT_BRANCH env variable to point to the current branch, so let's try
using this for branch detection.
Summary: When running regression tests on other branches, this will push values to entity rocksdb_build.$git_branch
Test Plan: Ran regression test on regression branch, observed values send to ODS in entity rocksdb_build.regression
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14493
Summary: Added readrandom benchmark with 300MB block cache, while database has 1GB of data
Test Plan: Ran it
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14373
Summary: The old regression tests didn't cover memtable part at all. This is an atempt to also measure memtable performance in regression tests.
Test Plan: Ran regression_build_test.sh
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14325
Summary: Add asan_check rule to Makefile. After we add this, we will create Jenkins run that will check for asan errors!
Test Plan: make asan_check
Reviewers: dhruba, kailiu, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14205
Summary: We don't need that dependency
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14199
Summary:
For some reason, snappy on CentOS 5.2 when compiled with gcc 4.8.1 segfaults on strcmp. (!?)
Add an if to compile with gcc4.7.1 if you're compiling on CentOS 5.2. Please update your devservers to CentOS 6.
Test Plan:
make clean; make check
on both my devserver (CentOS 6) and dhruba's (CentOS 5.2)
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14169
Summary: We also need to use custom glibc and libgcc includes instead of system ones.
Test Plan:
'make clean; make check'.
Will also try on @dhruba's dev server.
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14157
Summary:
1. Moved the compiler back to 4.8.1 and uses Centos 5.2 binaries if OS is Centos 5.2.
2. Fixes this issue: https://github.com/facebook/rocksdb/issues/7
3. We use lot of c++11 features, so we can't pretend we can compile without them. Makes it a first class dependency.
4. Fix blob_store_test, which failes on Ubuntu with "too many files opened" error
5. Removed dependency on port/port_chromium.h, which does not even exist on our system
Test Plan: make clean; make check
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14145
Summary: Dhruba can't compile on gcc4.8.1 so I'm moving temporarily back to 4.7.1 until we figure out what's wrong with 4.8. on his server.
Test Plan: It can compile on my devserver, but please 'arc patch' this diff and try compiling on your machine
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14139
Summary:
Argumentation here: https://github.com/facebook/rocksdb/issues/9
Even though we include snappy in the distribution, we do not link with it if we don't have snappy installed on the system.
Installing snappy is easy nowadays, just type:
sudo apt-get install libsnappy-dev
Test Plan: compile on ubuntu
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14133
Summary:
Finally did it - the trick was in using --dynamic-linker option. This is first step to running ASAN.
All of our code seems to compile just fine on 4.8.1. However, I still left fbcode.471.sh in the 'build_tools/' just in case.
Test Plan: make clean; make
Reviewers: dhruba, haobo, kailiu, emayanke, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14109
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary: The work to make sure mac os compiles rocksdb is not completed yet. But at least we can start cleaning some warnings captured only by g++ from mac os..
Test Plan: ran make in mac os
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14049
Summary: Converted db_stress, db_repl_stress and db_bench to use gflags
Test Plan: I tested by printing out all the flags from old and new versions. Tried defaults, + various combinations with "interesting flags". Also, tested by running db_crashtest.py and db_crashtest2.py.
Reviewers: emayanke, dhruba, haobo, kailiu, sdong
Reviewed By: emayanke
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D13581
Summary:
Create a new type of file on startup if it doesn't already exist called DBID.
This will store a unique number generated from boost library's uuid header file.
The use-case is to identify the case of a db losing all its data and coming back up either empty or from an image(backup/live replica's recovery)
the key point to note is that DBID is not stored in a backup or db snapshot
It's preferable to use Boost for uuid because:
1) A non-standard way of generating uuid is not good
2) /proc/sys/kernel/random/uuid generates a uuid but only on linux environments and the solution would not be clean
3) c++ doesn't have any direct way to get a uuid
4) Boost is a very good library that was already having linkage in rocksdb from third-party
Note: I had to update the TOOLCHAIN_REV in build files to get latest verison of boost from third-party as the older version had a bug.
I had to put Wno-uninitialized in Makefile because boost-1.51 has an unitialized variable and rocksdb would not comiple otherwise. Latet open-source for boost is 1.54 but is not there in third-party. I have notified the concerned people in fbcode about it.
@kailiu : While releasing to third-party, an additional dependency will need to be created for boost in TARGETS file. I can help identify.
Test Plan:
Expand db_test to test 2 cases
1) Restarting db with Id file present - verify that no change to Id
2)Restarting db with Id file deleted - verify that a different Id is there after reopen
Also run make all check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13587
Summary: The pupose of this diff is to expose per user-call level precise timing of block read, so that we can answer questions like: a Get() costs me 100ms, is that somehow related to loading blocks from file system, or sth else? We will answer that with EXACTLY how many blocks have been read, how much time was spent on transfering the bytes from os, how much time was spent on checksum verification and how much time was spent on block decompression, just for that one Get. A nano second stopwatch was introduced to track time with higher precision. The cost/precision of the stopwatch is also measured in unit-test. On my dev box, retrieving one time instance costs about 30ns, on average. The deviation of timing results is good enough to track 100ns-1us level events. And the overhead could be safely ignored for 100us level events (10000 instances/s), for example, a viewstate thrift call.
Test Plan: perf_context_test, also testing with viewstate shadow traffic.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D12351
Summary: Previously, RocksDB's build scripts used relative pathnames like ./build_detect_platform. This can cause problems if the user uses CDPATH. Also, it just doesn't seem right to me.
Test Plan:
make clean
make -j32 check
Reviewers: MarkCallaghan, dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12459
Summary:
* Added LIBNAME to enable configurable library name.
* remove/check fPIC in linux platform from build_detect_platform
Test Plan: make
Reviewers: emayanke
Differential Revision: https://reviews.facebook.net/D12321
Summary:
Previously I changed the line `source ./fbcode.gcc471.sh` to `source fbcode.gcc471.sh`. It works in my devbox but failed in some jenkin servers. I revert the previous code to make sure it works well under all circumstances.
Test Plan:
Test in the jenkin server as well as dev box.
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: As Aaron suggested, there are quite some problems with our Makefile and scripts. So in this diff I did some cleanup for them and revise some part of the scripts/makefile to help people better understand some mysterious parts.
Test Plan:
Ran make in several modes;
Ran the updated scripts.
Reviewers: dhruba, emayanke, akushner
Differential Revision: https://reviews.facebook.net/D12285
