Summary:
This PR
- since we are testing with disable_wal = true and best_efforts_recovery, we should set column family count to 1, due to the requirement of `ExpectedState` tracking and replaying logic.
- during backup and checkpoint restore, disable best-efforts-recovery. This does not matter now because db_crashtest.py always disables wal when testing best-efforts-recovery. In the future, if we enable wal, then not setting `restore_opitions.best_efforts_recovery` will cause backup db not to recover the WALs, and differ from db (that enables WAL).
- during verification of backup and checkpoint restore, print the key where inconsistency exists between expected state and db.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9986
Test Plan: TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_best_efforts_recovery
Reviewed By: siying
Differential Revision: D36353105
Pulled By: riversand963
fbshipit-source-id: a484da161273e6216a1f7e245bac15a349693917
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
Previously all fault injection was ignored in release mode. This PR adds it back except for read fault injection (`--read_fault_one_in > 0`) since its dependency (`IGNORE_STATUS_IF_ERROR`) is unavailable in release mode.
Other notable changes include:
- Moved `EnableWriteErrorInjection()` for `--write_fault_one_in > 0` so it's after `DB::Open()` without depending on `SyncPoint`
- Made `--read_fault_one_in > 0` return an error in release mode
- Updated `db_crashtest.py` to always set `--read_fault_one_in=0` in release mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9957
Test Plan:
```
$ DEBUG_LEVEL=0 make -j24 db_stress
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox
```
Reviewed By: anand1976
Differential Revision: D36193830
Pulled By: ajkr
fbshipit-source-id: 0b97946b4e3f06e3e0f6e7833c2763da08ec5321
Summary:
`db_stress` already tracks expected state history to verify prefix-recoverability when `sync_fault_injection` is enabled. This PR enables `sync_fault_injection` in `db_crashtest.py`.
Previously enabling `sync_fault_injection` would cause whole unsynced files to be dropped. This PR adds a more interesting case of losing only the tail of unsynced data by implementing `TestFSWritableFile::RangeSync()` and enabling `{wal_,}bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9947
Test Plan:
- regular blackbox, blackbox --simple
- various commands to stress this new case, such as `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=100000 --write_buffer_size=2097152 --avoid_flush_during_recovery=1 --disable_wal=0 --interval=10 --db_write_buffer_size=0 --sync_fault_injection=1 --wal_compression=none --delpercent=0 --delrangepercent=0 --prefixpercent=0 --iterpercent=0 --writepercent=100 --readpercent=0 --wal_bytes_per_sync=131072 --duration=36000 --sync=0 --open_write_fault_one_in=16`
Reviewed By: riversand963
Differential Revision: D36152775
Pulled By: ajkr
fbshipit-source-id: 44b68a7fad0a4cf74af9fe1f39be01baab8141d8
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.
To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.
In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.
Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929
Test Plan:
make check
make crash_test
make crash_test_with_txn
Reviewed By: anand1976
Differential Revision: D36069678
Pulled By: riversand963
fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
Summary:
Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions.
1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw.
2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true.
3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn
```
Reviewed By: pdillinger
Differential Revision: D35806678
Pulled By: riversand963
fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616
Summary:
Various renaming and fixes to get rid of remaining uses of
"backupable" which is terminology leftover from the original, flawed
design of BackupableDB. Now any DB can be backed up, using BackupEngine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D35334386
Pulled By: pdillinger
fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
The shared SstFileManager in db_stress can create background
work that races with TestCheckpoint such that DestroyDir fails because
of file rename while it is running. Analogous to change already made
for TestBackupRestore
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9673
Test Plan:
make blackbox_crash_test for a while with
checkpoint_one_in=100
Reviewed By: ajkr
Differential Revision: D34702215
Pulled By: pdillinger
fbshipit-source-id: ac3e166efa28cba6c6f4b9b391e799394603ebfd
Summary:
Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working.
`RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`.
There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads).
The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424
Test Plan:
- new unit tests
- new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart.
- setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true`
- benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true`
- crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10`
Reviewed By: hx235
Differential Revision: D33747386
Pulled By: ajkr
fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
I feel it would be nice if we can fix this spelling error.
In `SizeApproximationOptions`, the `include_memtabtles` should be `include_memtables`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9490
Test Plan: make check
Reviewed By: hx235
Differential Revision: D33949862
Pulled By: riversand963
fbshipit-source-id: b2be67501b65d4aabb6b8df1bf25eb8d54cc1466
Summary:
ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`.
Namely, `WriteOptions` should not include information about "what-to-write", but should just
include information about "how-to-write".
According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore,
this PR removes `WriteOptions::timestamp` for compliance.
After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set
of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and
`SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity
made me reconsider doing it in another PR (maybe).
For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take
extra `timestamp` information when writing to `WriteBatch`es.
These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list.
Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to
`WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps
allocated already and multiple timestamps can be updated.
The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp
size of the default column family. This will be used to allocate space when calling APIs that do not
specify a column family handle.
Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing
some assertions about timestamp to returning Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946
Test Plan:
make check
./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8
./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0
Make sure there is no perf regression by running the following
```
./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom
```
Before this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s
```
After this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s
```
Reviewed By: ltamasi
Differential Revision: D33721359
Pulled By: riversand963
fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, https://github.com/facebook/rocksdb/pull/9345, (optional) https://github.com/facebook/rocksdb/pull/9393
**Context:**
(Quoted from pdillinger) Layers of information during new Bloom/Ribbon Filter construction in building block-based tables includes the following:
a) set of keys to add to filter
b) set of hashes to add to filter (64-bit hash applied to each key)
c) set of Bloom indices to set in filter, with duplicates
d) set of Bloom indices to set in filter, deduplicated
e) final filter and its checksum
This PR aims to detect corruption (e.g, unexpected hardware/software corruption on data structures residing in the memory for a long time) from b) to e) and leave a) as future works for application level.
- b)'s corruption is detected by verifying the xor checksum of the hash entries calculated as the entries accumulate before being added to the filter. (i.e, `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()`)
- c) - e)'s corruption is detected by verifying the hash entries indeed exists in the constructed filter by re-querying these hash entries in the filter (i.e, `FilterBitsBuilder::MaybePostVerify()`) after computing the block checksum (except for PartitionFilter, which is done right after each `FilterBitsBuilder::Finish` for impl simplicity - see code comment for more). For this stage of detection, we assume hash entries are not corrupted after checking on b) since the time interval from b) to c) is relatively short IMO.
Option to enable this feature of detection is `BlockBasedTableOptions::detect_filter_construct_corruption` which is false by default.
**Summary:**
- Implemented new functions `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()` and `FilterBitsBuilder::MaybePostVerify()`
- Ensured hash entries, final filter and banding and their [cache reservation ](https://github.com/facebook/rocksdb/issues/9073) are released properly despite corruption
- See [Filter.construction.artifacts.release.point.pdf ](https://github.com/facebook/rocksdb/files/7923487/Design.Filter.construction.artifacts.release.point.pdf) for high-level design
- Bundled and refactored hash entries's related artifact in XXPH3FilterBitsBuilder into `HashEntriesInfo` for better control on lifetime of these artifact during `SwapEntires`, `ResetEntries`
- Ensured RocksDB block-based table builder calls `FilterBitsBuilder::MaybePostVerify()` after constructing the filter by `FilterBitsBuilder::Finish()`
- When encountering such filter construction corruption, stop writing the filter content to files and mark such a block-based table building non-ok by storing the corruption status in the builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9342
Test Plan:
- Added new unit test `DBFilterConstructionCorruptionTestWithParam.DetectCorruption`
- Included this new feature in `DBFilterConstructionReserveMemoryTestWithParam.ReserveMemory` as this feature heavily touch ReserveMemory's impl
- For fallback case, I run `./filter_bench -impl=3 -detect_filter_construct_corruption=true -reserve_table_builder_memory=true -strict_capacity_limit=true -quick -runs 10 | grep 'Build avg'` to make sure nothing break.
- Added to `filter_bench`: increased filter construction time by **30%**, mostly by `MaybePostVerify()`
- FastLocalBloom
- Before change: `./filter_bench -impl=2 -quick -runs 10 | grep 'Build avg'`: **28.86643s**
- After change:
- `./filter_bench -impl=2 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless): **27.6644s (-4% perf improvement might be due to now we don't drop bloom hash entry in `AddAllEntries` along iteration but in bulk later, same with the bypassing-MaybePostVerify case below)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (expect acceptable increase): **34.41159s (+20%)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (by-passing MaybePostVerify, expect minor increase): **27.13431s (-6%)**
- Standard128Ribbon
- Before change: `./filter_bench -impl=3 -quick -runs 10 | grep 'Build avg'`: **122.5384s**
- After change:
- `./filter_bench -impl=3 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless - verified by removing MaybePostVerify under this case and found only +-1ns difference): **124.3588s (+2%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(expect acceptable increase): **159.4946s (+30%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(by-passing MaybePostVerify, expect minor increase) : **125.258s (+2%)**
- Added to `db_stress`: `make crash_test`, `./db_stress --detect_filter_construct_corruption=true`
- Manually smoke-tested: manually corrupted the filter construction in some db level tests with basic PUT and background flush. As expected, the error did get returned to users in subsequent PUT and Flush status.
Reviewed By: pdillinger
Differential Revision: D33746928
Pulled By: hx235
fbshipit-source-id: cb056426be5a7debc1cd16f23bc250f36a08ca57
Summary:
Previously we enabled tracking expected state changes during
`FinishInitDb()`, as soon as the DB was opened. This meant tracing was
enabled during `VerifyDb()`. This cost extra CPU by requiring
`DBImpl::trace_mutex_` to be acquired on each read operation. It was
unnecessary since we know there are no expected state changes during the
`VerifyDb()` phase. So, this PR delays tracking expected state changes
until after the `VerifyDb()` phase has completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9470
Test Plan:
Measured this PR reduced `VerifyDb()` 76% (387 -> 92 seconds) with
`-disable_wal=1` (i.e., expected state tracking enabled).
- benchmark command: `./db_stress -max_key=100000000 -ops_per_thread=1 -destroy_db_initially=1 -expected_values_dir=/dev/shm/dbstress_expected/ -db=/dev/shm/dbstress/ --clear_column_family_one_in=0 --disable_wal=1 --reopen=0`
- without this PR, `VerifyDb()` takes 387 seconds:
```
2022/01/30-21:43:04 Initializing worker threads
Crash-recovery verification passed :)
2022/01/30-21:49:31 Starting database operations
```
- with this PR, `VerifyDb()` takes 92 seconds
```
2022/01/30-21:59:06 Initializing worker threads
Crash-recovery verification passed :)
2022/01/30-22:00:38 Starting database operations
```
Reviewed By: riversand963
Differential Revision: D33884596
Pulled By: ajkr
fbshipit-source-id: 5f259de8087de5b0531f088e11297f37ed2f7685
Summary:
This also removes the obsolete names BackupableDBOptions
and UtilityDB. API users must now use BackupEngineOptions and
DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced
`rocksdb_backup_engine_*`. Similar renaming in Java API.
In reference to https://github.com/facebook/rocksdb/issues/9389
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33780269
Pulled By: pdillinger
fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
db_stress listener service always uses default filesystem to operate,
causing it to not recognize custom filesystem (like ZenFS plugin FS).
Pass the env to db_stress listener with the correct filesystem
information, so it can open the user intended filesystem.
Signed-off-by: Aravind Ramesh <Aravind.Ramesh@wdc.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9352
Reviewed By: riversand963
Differential Revision: D33776762
Pulled By: pdillinger
fbshipit-source-id: e79bb9a544384f80ae9dd0108241ab9c83223954
Summary:
Recently we added the ability to verify some prefix of operations are recovered (AKA no "hole" in the recovered data) (https://github.com/facebook/rocksdb/issues/8966). Besides testing unsynced data loss scenarios, it is also useful to test WAL disabled use cases, where unflushed writes are expected to be lost. Note RocksDB only offers the prefix-recovery guarantee to WAL-disabled use cases that use atomic flush, so crash test always enables atomic flush when WAL is disabled.
To verify WAL-disabled crash-recovery correctness globally, i.e., also in whitebox and blackbox transaction tests, it is possible but requires further changes. I added TODOs in db_crashtest.py.
Depends on https://github.com/facebook/rocksdb/issues/9305.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9338
Test Plan: Running all crash tests and many instances of blackbox. Sandcastle links are in Phabricator diff test plan.
Reviewed By: riversand963
Differential Revision: D33345333
Pulled By: ajkr
fbshipit-source-id: f56dd7d2e5a78d59301bf4fc3fedb980eb31e0ce
Summary:
This fixes two bugs in the recently committed DB verification following
crash-recovery with unsynced data loss (https://github.com/facebook/rocksdb/issues/8966):
The first bug was in crash test runs involving mixed values for
`-test_batches_snapshots`. The problem was we were neither restoring
expected values nor enabling tracing when `-test_batches_snapshots=1`.
This caused a future `-test_batches_snapshots=0` run to not find enough
trace data to restore expected values. The fix is to restore expected
values at the start of `-test_batches_snapshots=1` runs, but still leave
tracing disabled as we do not need to track those KVs.
The second bug was in `db_stress` runs that restore the expected values
file and use compaction filter. The compaction filter was initialized to use
the pre-restore expected values, which would be `munmap()`'d during
`FileExpectedStateManager::Restore()`. Then compaction filter would run
into a segfault. The fix is just to reorder compaction filter init after expected
values restore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9302
Test Plan:
- To verify the first problem, the below sequence used to fail; now it passes.
```
$ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0
$ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=1
$ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0
```
- The second problem occurred rarely in the form of a SIGSEGV on a file that was `munmap()`d. I have not seen it after this PR though this doesn't prove much.
Reviewed By: jay-zhuang
Differential Revision: D33155283
Pulled By: ajkr
fbshipit-source-id: 66fd0f0edf34015a010c30015f14f104734e964e
Summary:
When a previous run left behind historical state/trace files (implying it was run with --sync_fault_injection set), this PR uses them to restore the expected state according to the DB's recovered sequence number. That way, a tail of latest unsynced operations are permitted to be dropped, as is the case when data in page cache or certain `Env`s is lost. The point of the verification in this scenario is just to ensure there is no hole in the recovered data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8966
Test Plan:
- ran it a while, made sure it is restoring expected values using the historical state/trace files:
```
$ rm -rf ./tmp-db/ ./exp/ && mkdir -p ./tmp-db/ ./exp/ && while ./db_stress -compression_type=none -clear_column_family_one_in=0 -expected_values_dir=./exp -sync_fault_injection=1 -destroy_db_initially=0 -db=./tmp-db -max_key=1000000 -ops_per_thread=10000 -reopen=0 -threads=32 ; do : ; done
```
Reviewed By: pdillinger
Differential Revision: D31219445
Pulled By: ajkr
fbshipit-source-id: f0e1d51fe5b35465b00565c33331190ea38ba0ad
Summary:
Current db_stress does not cover complex read-write transactions. Therefore, this PR adds
coverage for emulated MyRocks-style transactions in `MultiOpsTxnsStressTest`. To achieve this, we need:
- Add a new operation type 'customops' so that we can add new complex groups of operations, e.g. transactions involving multiple read-write operations.
- Implement three read-write transactions and two read-only ones to emulate MyRocks-style transactions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8936
Test Plan:
```
make check
./db_stress -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=100000
```
Next step is to add more configurability and refine input generation and result reporting, which will done in separate follow-up PRs.
Reviewed By: zhichao-cao
Differential Revision: D31071795
Pulled By: riversand963
fbshipit-source-id: 50d7c828346ec643311336b904848a1588a37006
Summary:
When table_options.prepopulate_block_cache is set to
BlockBasedTableOptions::PrepopulateBlockCache::kFlushOnly and
table_options.partition_filters is also set true, then there is
segmentation failure when top level filter is fetched because its
entered with wrong type in cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9263
Test Plan:
Updated unit tests;
Ran db_stress: make crash_test -j32
Reviewed By: pdillinger
Differential Revision: D32936566
Pulled By: akankshamahajan15
fbshipit-source-id: 8bd79e53830d3e3c1bb79787e1ffbc3cb46d4426
Summary:
When `--sync_fault_injection` is set, this PR takes a snapshot of the expected values and starts an operation trace when the DB is opened. These files are stored in `--expected_values_dir`. They will be used for recovering the expected state of the DB following a crash where a suffix of unsynced operations are allowed to be lost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8960
Test Plan: injected crashed at various points in `FileExpectedStateManager` and verified the next run recovers the state/trace file with highest seqno and removes all older/temporary files. Note we don't use sync_fault_injection in CI crash tests yet.
Reviewed By: pdillinger
Differential Revision: D31194941
Pulled By: ajkr
fbshipit-source-id: b0f935a529a0186c5a9c7709fcaa8829de8a84cf
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
If a column family has 0 levels, then existing `TestCompactFiles(...)` may hit
divide-by-zero. To fix, return early if the cf is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9086
Test Plan: TBD
Reviewed By: ajkr
Differential Revision: D31986799
Pulled By: riversand963
fbshipit-source-id: 48f7dfb2b2b47cfc1315cb71ca80eb230d947f17
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
Enable SingleDelete with user defined timestamp in db_bench,
db_stress and crash test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8971
Test Plan:
1. For db_stress, ran the command for full duration: i) python3 -u tools/db_crashtest.py
--enable_ts whitebox --nooverwritepercent=100
ii) make crash_test_with_ts
2. For db_bench, ran: ./db_bench -benchmarks=randomreplacekeys
-user_timestamp_size=8 -use_single_deletes=true
Reviewed By: riversand963
Differential Revision: D31246558
Pulled By: akankshamahajan15
fbshipit-source-id: 29cd8740c9921341e52f09242fca3c44d75a12b7
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
* FullKey and ParseFullKey appear to serve no purpose in the public API
(or anything else) so removed. Only use in one test updated.
* NumberToString serves no purpose vs. ToString so removed, numerous
calls updated
* Remove unnecessary forward declarations in metadata.h by re-arranging
class definitions.
* Remove some unneeded semicolons
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736
Test Plan: existing tests
Reviewed By: mrambacher
Differential Revision: D30700039
Pulled By: pdillinger
fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2
Summary:
This is essentially resurrection and fixing of the part of
https://github.com/facebook/rocksdb/issues/8198 that was reverted in https://github.com/facebook/rocksdb/issues/8212, using data added in https://github.com/facebook/rocksdb/issues/8246. Basically,
when configuring Ribbon filter, you can specify an LSM level before which
Bloom will be used instead of Ribbon. But Bloom is only considered for
Leveled and Universal compaction styles and file going into a known LSM
level. This way, SST file writer, FIFO compaction, etc. use Ribbon filter as
you would expect with NewRibbonFilterPolicy.
So that this can be controlled with a single int value and so that flushes
can be distinguished from intra-L0, we consider flush to go to level -1 for
the purposes of this option. (Explained in API comment.)
I also expect the most common and recommended Ribbon configuration to
use Bloom during flush, to minimize slowing down writes and because according
to my estimates, Ribbon only pays off if the structure lives in memory for
more than an hour. Thus, I have changed the default for NewRibbonFilterPolicy
to be this mild hybrid configuration. I don't really want to add something like
NewHybridFilterPolicy because at least the mild hybrid configuration (Bloom for
flush, Ribbon otherwise) should be considered a natural choice.
C APIs also updated, but because they don't support overloading,
rocksdb_filterpolicy_create_ribbon is kept pure ribbon for clarity and
rocksdb_filterpolicy_create_ribbon_hybrid must be called for a hybrid
configuration. While touching C API, I changed bits per key options from
int to double.
BuiltinFilterPolicy is needed so that LevelThresholdFilterPolicy doesn't inherit
unused fields from BloomFilterPolicy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8679
Test Plan: new + updated tests, including crash test
Reviewed By: jay-zhuang
Differential Revision: D30445797
Pulled By: pdillinger
fbshipit-source-id: 6f5aeddfd6d79f7e55493b563c2d1d2d568892e1
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
FaultInjectionTestFS injects error in Rename operation. Because
of injected error, info.log fails to be created if rename returns error and info_log is set to nullptr which leads to this assertion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8632
Test Plan: run the db_stress job locally
Reviewed By: ajkr
Differential Revision: D30167387
Pulled By: akankshamahajan15
fbshipit-source-id: 8d08c4c33e8f0cabd368bbb498d21b9de0660067
Summary:
Add `experimental_mempurge_policy` flag to `db_stress` and `db_crashtest.py`.
This flag is only read if the `experimental_allow_mempurge` flag is set to `true`. This flag can take the following values: `kAlways`, and `kAlternate` (default).
- `kAlways`: a flush is always redirected to a mempurge. If the mempurge aborts, the a regular flush proceeds.
- `kAlternate`: if one or more of the flush input memtables is an mempurge output memtable, then a flush is performed, else a mempurge is carried out. Similar to kAlways, if a mempurge aborts, the FlushJob proceeds to a regular flush to storage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8588
Reviewed By: pdillinger
Differential Revision: D29934251
Pulled By: bjlemaire
fbshipit-source-id: 90c1debed2029b9915d066914556547507c33dae
Summary:
https://github.com/facebook/rocksdb/pull/8548 is not complete. We should instead cover all cases writable files are buffered, not just when failures are ingested. Extend it to any case where failures are ingested in DB open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8570
Test Plan: Run db_stress and see it doesn't break
Reviewed By: jay-zhuang
Differential Revision: D29830415
fbshipit-source-id: 94449a0468fb2f7eec17423724008c9c63b2445d
Summary:
Delete column family handlers before deleting db to avoid `last_ref`
assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8564
Test Plan: Inject compaction test in db_stress test
Reviewed By: pdillinger
Differential Revision: D29797375
Pulled By: jay-zhuang
fbshipit-source-id: e8baf4d279f4db5d963db95c9445454156205501
Summary:
Already has good coverage for GetProperty and GetIntProperty
but this one was missing.
This should add more confidence to https://github.com/facebook/rocksdb/issues/8538
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8551
Test Plan:
brief local run with boosted probability showed no immediate
issues
Reviewed By: siying
Differential Revision: D29746383
Pulled By: pdillinger
fbshipit-source-id: 9f9f525bc1a7607f85e563e33bda1979ef197127
Summary:
When DB Stress enables write failure in reopen, WAL files are also created with a wrapper writalbe file which buffers write until fsync. However, crash test currently expects all writes to WAL is persistent. This is at odd with the unsynced bytes dropped. To work it around temporarily, we disable WAL write failure for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8548
Test Plan: Run db_stress. Manual printf to make sure only WAL files are skipped.
Reviewed By: jay-zhuang
Differential Revision: D29745095
fbshipit-source-id: 1879dd2c01abad7879ca243ee94570ec47c347f3
