Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Expose DB methods to lock and unlock the WAL.
These methods are intended to use by MyRocks in order to obtain WAL
coordinates in consistent way.
Usage scenario is following:
MySQL has performance_schema.log_status which provides information that
enables a backup tool to copy the required log files without locking for
the duration of copy. To populate this table MySQL does following:
1. Lock the binary log. Transactions are not allowed to commit now
2. Save the binary log coordinates
3. Walk through the storage engines and lock writes on each engine. For
InnoDB, redo log is locked. For MyRocks, WAL should be locked.
4. Ask storage engines for their coordinates. InnoDB reports its current
LSN and checkpoint LSN. MyRocks should report active WAL files names
and sizes.
5. Release storage engine's locks
6. Unlock binary log
Backup tool will then use this information to copy InnoDB, RocksDB and
MySQL binary logs up to specified positions to end up with consistent DB
state after restore.
Currently, RocksDB allows to obtain the list of WAL files. Only missing
bit is the method to lock the writes to WAL files.
LockWAL method must flush the WAL in order for the reported size to be
accurate (GetSortedWALFiles is using file system stat call to return the
file size), also, since backup tool is going to copy the WAL, it is
better to be flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5146
Differential Revision: D14815447
Pulled By: maysamyabandeh
fbshipit-source-id: eec9535a6025229ed471119f19fe7b3d8ae888a3
Summary:
There is a potential failure case in DBImpl::SwitchMemtable() that is not handled properly. The call to cur_log_writer->WriteBuffer() can fail due to an IO error. In that case, we need to call SetBGError() in order set the background error since the WriteBuffer() failure may result in data loss.
Also, the asserts for !new_mem and !new_log are incorrect, as those would have been allocated by the time this failure is detected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5072
Differential Revision: D14461384
Pulled By: anand1976
fbshipit-source-id: fb59bce9d61378f37d2dfcd28c0b704b0f43c3cf
Summary:
TSAN reports a false alarm for lock-order-inversion in DBWriteTest.IOErrorOnWALWritePropagateToWriteThreadFollower but Open and FlushWAL are not run concurrently. Suppressing the error by skipping FlushWAL in the test until TSAN is fixed.
The alternative would be to use
```
TSAN_OPTIONS="suppressions=tsan-suppressions.txt" ./db_write_test
```
but it does not seem straightforward to integrate it to our test infra.
Closes https://github.com/facebook/rocksdb/pull/3854
Differential Revision: D8000202
Pulled By: maysamyabandeh
fbshipit-source-id: fde33483d963a7ad84d3145123821f64960a4802
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
It was misnamed. It actually updates `bg_error_` if `PreprocessWrite()` or `WriteToWAL()` fail, not related to the user callback.
Closes https://github.com/facebook/rocksdb/pull/3485
Differential Revision: D6955787
Pulled By: ajkr
fbshipit-source-id: bd7afc3fdb7a52830c021cbfc25fcbc3ab7d5e10
Summary:
Previously we store sequence number range of each blob files, and use the sequence number range to check if the file can be possibly visible by a snapshot. But it adds complexity to the code, since the sequence number is only available after a write. (The current implementation get sequence number by calling GetLatestSequenceNumber(), which is wrong.) With the patch, we are not storing sequence number range, and check if snapshot_sequence < obsolete_sequence to decide if the file is visible by a snapshot (previously we check if first_sequence <= snapshot_sequence < obsolete_sequence).
Closes https://github.com/facebook/rocksdb/pull/3274
Differential Revision: D6571497
Pulled By: yiwu-arbug
fbshipit-source-id: ca06479dc1fcd8782f6525b62b7762cd47d61909
Summary:
This is a simpler version of #3097 by removing all unrelated changes.
Fixing the bug where concurrent writes may get Status::OK while it actually gets IOError on WAL write. This happens when multiple writes form a write batch group, and the leader get an IOError while writing to WAL. The leader failed to pass the error to followers in the group, and the followers end up returning Status::OK() while actually writing nothing. The bug only affect writes in a batch group. Future writes after the batch group will correctly return immediately with the IOError.
Closes https://github.com/facebook/rocksdb/pull/3201
Differential Revision: D6421644
Pulled By: yiwu-arbug
fbshipit-source-id: 1c2a455c5b73f6842423785eb8a9dbfbb191dc0e
Summary:
write_options.sync = true and write_options.disableWAL is incompatible. When WAL is disabled, we are not able to persist the write immediately. Return an error in this case to avoid misuse of the options.
Closes https://github.com/facebook/rocksdb/pull/3086
Differential Revision: D6176822
Pulled By: yiwu-arbug
fbshipit-source-id: 1eb10028c14fe7d7c13c8bc12c0ef659f75aa071
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Make default impl return NoSupported so the db_blob
tests exist in a meaningful manner.
Replace std::thread to port::Thread
Closes https://github.com/facebook/rocksdb/pull/2465
Differential Revision: D5275563
Pulled By: yiwu-arbug
fbshipit-source-id: cedf1a18a2c05e20d768c1308b3f3224dbd70ab6
Summary:
rocksdb::Random is not thread-safe. Have one Random for each thread instead.
Closes https://github.com/facebook/rocksdb/pull/2400
Differential Revision: D5173919
Pulled By: yiwu-arbug
fbshipit-source-id: 1a99c7b877f3893eb22355af49e321bcad4e53e6
Summary:
Blob db rely on base db returning sequence number through write batch after DB::Write(). However after recent changes to the write path, DB::Writ()e no longer return sequence number in some cases. Fixing it by have WriteBatchInternal::InsertInto() always encode sequence number into write batch.
Stacking on #2375.
Closes https://github.com/facebook/rocksdb/pull/2385
Differential Revision: D5148358
Pulled By: yiwu-arbug
fbshipit-source-id: 8bda0aa07b9334ed03ed381548b39d167dc20c33
