Summary:
[RocksDB] Make it easier for users to load options from option file and set shared block cache.
Right now, it requires several dynamic casting for users to set the shared block cache to their option struct cast from the option file.
If people don't do that, every CF of every DB will generate its own 8MB block cache. It's not a usable setting. So we are dragging every user who loads options from the file into such a mess.
Instead, we should allow them to pass their cache object to LoadLatestOptions() and LoadOptionsFromFile(), so that those loaded option structs will have the shared block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5063
Differential Revision: D14518584
Pulled By: rashmishrm
fbshipit-source-id: c91430ff9425a0e67d76fc67931d755f491ca5aa
Summary:
The original implementation of WinEnvIO::NowNanos() has a constant data overflow by:
li.QuadPart *= std::nano::den;
As a result, the api provides a incorrect result.
e.g.:
li.QuadPart=13477844301545
std::nano::den=1e9
The fix uses pre-computed nano_seconds_per_period_ to present the nano seconds per performance counter period, in the case if nano::den is divisible by perf_counter_frequency_. Otherwise it falls back to use high_resolution_clock.
siying ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5062
Differential Revision: D14426842
Pulled By: anand1976
fbshipit-source-id: 127f1daf423dd4b30edd0dcf8ea0466f468bec12
Summary:
The patch reorders DBIter fields to put 1-byte fields together and let the compiler optimize the memory usage by using less 64-bit allocations for bools and enums.
This might have a negative side effect of putting the variables that are accessed together into different cache lines and hence increasing the cache misses. Not sure what benchmark would verify that thought. I ran simple, single-threaded seekrandom benchmarks but the variance in the results is too much to be conclusive.
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5078
Differential Revision: D14562676
Pulled By: maysamyabandeh
fbshipit-source-id: 2284655d46e079b6e9a860e94be5defb6f482167
Summary:
The patch adds a new config option to LRUCacheOptions that enables
users to choose whether to use an adaptive mutex for the LRU block
cache (on platforms where adaptive mutexes are supported). The default
is true if RocksDB is compiled with -DROCKSDB_DEFAULT_TO_ADAPTIVE_MUTEX,
false otherwise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5054
Differential Revision: D14542749
Pulled By: ltamasi
fbshipit-source-id: 0065715ab6cf91f10444b737fed8c8aee6a8a0d2
Summary:
The stack buffer in rocksdb::autovector is currently defined as an array of elements of the template type. This results in unnecessary construction of those objects, which can be a significant overhead in some cases. This PR changes the type of the stack buf to char* and uses placement new to construct new objects when they are inserted into the autovector.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5080
Differential Revision: D14533221
Pulled By: anand1976
fbshipit-source-id: 9378985c7d03f4e1a28951bdd2403c72f10f23d7
Summary:
BackupEngine relies on write-ahead logs to back up the memtable. Disabling write-ahead logs
can result in backups failing to preserve unflushed keys. This PR updates the documentation to specify this behavior, and suggest always flushing the memtable when write-ahead logs are disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5071
Differential Revision: D14524124
Pulled By: miasantreble
fbshipit-source-id: 635f855f8a42ad60273b5efd226139b511e3e5d5
Summary:
Add an option to filter out READ or WRITE operations while tracing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5082
Differential Revision: D14515083
Pulled By: mrmiywj
fbshipit-source-id: 2504c89a9abf1dd629cad44b4104092702d77610
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
Initialize magic_number to zero to avoid such failure.
utilities/blob_db/blob_log_format.cc:91:3: error: 'magic_number' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
if (magic_number != kMagicNumber) {
^~
Signed-off-by: He Zhe <zhe.he@windriver.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5074
Differential Revision: D14505514
Pulled By: miasantreble
fbshipit-source-id: 4334462958c2b9c5a7c68c6ab24dadf94ad70902
Summary:
There is a potential failure case in DBImpl::SwitchMemtable() that is not handled properly. The call to cur_log_writer->WriteBuffer() can fail due to an IO error. In that case, we need to call SetBGError() in order set the background error since the WriteBuffer() failure may result in data loss.
Also, the asserts for !new_mem and !new_log are incorrect, as those would have been allocated by the time this failure is detected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5072
Differential Revision: D14461384
Pulled By: anand1976
fbshipit-source-id: fb59bce9d61378f37d2dfcd28c0b704b0f43c3cf
Summary:
Since this feature affects the WAL behavior, it seems important our crash-recovery tests cover it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5070
Differential Revision: D14470085
Pulled By: miasantreble
fbshipit-source-id: 9b9682a718a926d57d055e0a5ec867efbd2eb9c1
Summary:
In the current trace_analyzer implementation, once the trace file has corrupted content, which can be caused by unexpected tracing operations or other reasons, trace_analyzer will print the error and stop analyzing.
By adding the -try_process_corrupted_trace option, user can try to process the corrupted trace file and get the analyzing results of the trace records from the beginning to the the first corrupted point in the trace file. Analyzing might fail even this option is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5067
Differential Revision: D14433037
Pulled By: zhichao-cao
fbshipit-source-id: d095233ba371726869af0def0cdee23b69896831
Summary:
Without `total_order_seek=true`, using this command with `prefix_extractor` set skips over lots of keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5066
Differential Revision: D14425967
Pulled By: sagar0
fbshipit-source-id: f6f142733258d92604f920615be9266e1fe797f8
Summary:
JEMALLOC_CXX_THROW is not defined for earlier versions of jemalloc (e.g. 3.6), causing builds to fail on some platforms. Fixing it. Closes#4869
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5053
Differential Revision: D14390034
Pulled By: sagar0
fbshipit-source-id: b2b7a03cd377201ef385eb521f65bae85c558055
Summary:
In the MixGraph benchmark of db_bench, The max buffer size used for value of KV-pair might be extremely large (64MB), which might cause function stack overflow in some platforms, reduced to 1MB.
Added the finished ops printing in MixGraph benchmark.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5051
Differential Revision: D14379571
Pulled By: zhichao-cao
fbshipit-source-id: 24084fbe38f60f2902d9a40f6bc9a25e4e2c9bb9
Summary:
Print data block index type related options to info log
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5039
Differential Revision: D14387718
Pulled By: miasantreble
fbshipit-source-id: 9df8f82eea83a8344c7d12a712486f656691bc4a
Summary:
Add a mutex to the test to synchronize before accessing the shared txn object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5052
Differential Revision: D14386861
Pulled By: maysamyabandeh
fbshipit-source-id: 5b32e209840b210c35af53848dc77f489a76c95a
Summary:
The patch fixes an improbable race condition between AddPrepared from one write queue and AdvanceMaxEvictedSeq from another queue. In this scenario AddPrepared finds prepare_seq lower than max and adding to PrepareHeap as usual while AdvanceMaxEvictedSeq has finished checking PrepareHeap against the future max. Thus when AdvanceMaxEvictedSeq finishes off by updating the max_evicted_seq_, PrepareHeap ends up with a prepared_seq lower than it which breaks the PrepareHeap contract. The fix is that in AddPrepared we check against the future_max_evicted_seq_ instead, which is update before AdvanceMaxEvictedSeq acquire prepare_mutex_ and looks into PrepareHeap.
A unit test added to test for the failure scenario. The code is also refactored a bit to remove the duplicate code between AdvanceMaxEvictedSeq and AddPrepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5025
Differential Revision: D14249028
Pulled By: maysamyabandeh
fbshipit-source-id: 072ea56663f40359662c05fafa6ac524417b0622
Summary:
The patch adds the sequence number of the rollback patch to the PrepareHeap when two_write_queues is enabled. Although the current behavior is still correct, the change simplifies reasoning about the code, by having all uncommitted batches registered with the PreparedHeap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5026
Differential Revision: D14249401
Pulled By: maysamyabandeh
fbshipit-source-id: 1e3424edee5cd14e56ee35931ad3c93ed997cd5a
Summary:
The compiler flag `-DROCKSDB_FALLOCATE_PRESENT` was only set when
`fallocate`, `FALLOC_FL_KEEP_SIZE`, and `FALLOC_FL_PUNCH_HOLE` were all
present. However, the last of the three is not really necessary for the
primary `fallocate` use case; furthermore, it was introduced only in later
Linux kernel versions (2.6.38+).
This PR changes the flag `-DROCKSDB_FALLOCATE_PRESENT` to only require
`fallocate` and `FALLOC_FL_KEEP_SIZE` to be present. There is a separate
check for `FALLOC_FL_PUNCH_HOLE` only in the place where it is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5023
Differential Revision: D14248487
Pulled By: siying
fbshipit-source-id: a10ed0b902fa755988e957bd2dcec9081ec0502e
Summary:
Disabling `org.rocksdb.RocksDBTest.getApproximateSizes` test as it is frequently crashing on travis (#5020). It will be re-enabled once the root-cause is found and fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5035
Differential Revision: D14294736
Pulled By: sagar0
fbshipit-source-id: e28bff0d143a58ad6c82991fec3d4cf8c0209995
Summary:
This reverts commit ee1818081f.
We are not ready to deprecate this feature. revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5034
Differential Revision: D14287246
Pulled By: siying
fbshipit-source-id: e4beafdeaee1c94364fdaa6ba198218d158339f7
Summary:
Added an option, `-use_existing_keys`, which can be set to run
benchmarks against an arbitrary existing database. Now users can
benchmark against their actual database rather than synthetic data.
Before the run begins, it loads all the keys into memory, then uses that
set of keys rather than synthesizing new ones in `GenerateKeyFromInt`.
This is mainly intended for small-scale DBs where the memory consumption
is not a concern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5017
Differential Revision: D14270303
Pulled By: riversand963
fbshipit-source-id: 6328df9dffb5e19170270dd00a69f4bbe424e5ed
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
This the hackish script we used to find the root cause of failures in transaction stress tests. It is not well-written and does not require rigorous reviewing but it is better than starting from scratch each time we observe an issue. The stress tests would just say that at which snapshots the sum of all the keys in a set is inconsistent with another set. To help debugging one need to know which key exactly returned inconsistent results. The script looks at the transactions between two conflicting snapshots, and performs thee changes manually to see for which key the read value was inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5033
Differential Revision: D14280362
Pulled By: maysamyabandeh
fbshipit-source-id: d5826055c46711460ba81480d96cb5ea082814a5
Summary:
PreReleaseCallback meant to be called before the writes are visible to the readers. Since the sequence number is known after the WAL write, there is no reason to delay calling PreReleaseCallback to after the memtable write, which would complicates the reader's logic in presence of our memtable writes that are made visible by the other write thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5015
Differential Revision: D14221670
Pulled By: maysamyabandeh
fbshipit-source-id: a504dd665cf923226d7af09cc8e9c7739a25edc6
Summary:
When two_write_queues is enabled we call ::AddPrepared only from the main queue, which writes to both WAL and memtable, and call ::AddCommitted from the 2nd queue, which writes only to WAL. This simplifies the logic by avoiding concurrency between AddPrepared and also between AddCommitted. The patch fixes one case that did not conform with the rule above. This would allow future refactoring. For example AdvaneMaxEvictedSeq, which is invoked by AddCommitted, can be simplified by assuming lack of concurrent calls to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5014
Differential Revision: D14210493
Pulled By: maysamyabandeh
fbshipit-source-id: 6db5ba372a294a568a14caa010576460917a4eab
Summary:
`DefaultEnvTest.incBackgroundThreadsIfNeeded` jtest should assert that the number of threads is greater than or equal to the minimum number of threads.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5021
Differential Revision: D14268311
Pulled By: sagar0
fbshipit-source-id: 01fb32b5b3ce636451d162fa1a2bbc5bd1974682
Summary:
Replace the integers used for setting and querying the various
flags in LRUHandle with enum values to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5024
Differential Revision: D14263429
Pulled By: ltamasi
fbshipit-source-id: b1b9ba95635265f122c2b40da73850eaac18227a
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
This is my latest round of changes to add missing items to RocksJava. More to come in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4833
Differential Revision: D14152266
Pulled By: sagar0
fbshipit-source-id: d6cff67e26da06c131491b5cf6911a8cd0db0775
Summary:
When closing a BlobDB, it only waits for background tasks
to finish as the last thing, but the background task may access
some variables that are destroyed. The fix is to introduce a
shutdown function in the timer queue and call the function as
the first thing when destorying BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5005
Differential Revision: D14170342
Pulled By: siying
fbshipit-source-id: 081e6a2d99b9765d5956cf6cdfc290c07270c233
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
Currently the transaction stress tests use thread id as the seed. Since the thread ids are likely to be the same across multiple runs, the seed is thus going to be the same. The patch includes time in calculating the seed to help covering a very different part of state space in each run of the stress tests. To be able to reproduce the bug in case the stress tests failed, it also prints out the time that was used to calculate the seed value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5004
Differential Revision: D14144356
Pulled By: maysamyabandeh
fbshipit-source-id: 728ed522f550fc8b4f5f9f373259c05fe9a54556
Summary:
The transaction stress tests, stress a high concurrency scenario. In WritePrepared/WriteUnPrepared we need to also stress the scenarios where an inserting/reading transaction is very slow. This would stress the corner cases that the caching is not sufficient and other slower data structures are engaged. To emulate such cases we make use of slow inserter/verifier threads and also reduce the size of cache data structures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4974
Differential Revision: D14143070
Pulled By: maysamyabandeh
fbshipit-source-id: 81eb674678faf9fae0f654cd60ebcc74e26aeee7
Summary:
max_evicted_seq_ could be updated in the middle of the read in ::IsInSnapshot. The code to be correct in presence of this update would be complicated. The patch simplifies it by checking the value of max_evicted_seq_ before and after looking into commit_cache_ and retries in the unlucky case that it was changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4955
Differential Revision: D13999556
Pulled By: maysamyabandeh
fbshipit-source-id: 7a1bdfa95ea8b5d8d73ddff3263ed31d7297b39c
Summary:
Currently crash test covers cases with and without atomic flush, but takes too
long to finish. Therefore it may be a better idea to put crash test with atomic
flush in a separate set of tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4945
Differential Revision: D13947548
Pulled By: riversand963
fbshipit-source-id: 177c6de865290fd650b0103408339eaa3f801d8c
