Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
Currently, whenever DB Verification fails we bail out by calling `exit(1)`. This is kind of bad since it causes unclean shutdown and spew of error log messages like:
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
This diff adds a new parameter that is set to true when verification fails. It can then use the parameter to bail out safely.
Test Plan: Casued artificail failure. Verified that exit was clean.
Reviewers: dhruba, haobo, ljin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18243
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary: We don't use or build this code
Test Plan: builds
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17979
Summary:
This is first step of my effort to reduce size of librocksdb.a for use in mobile.
ldb object files are huge and are ment to be used as a command line tool. I moved them to `tools/` directory and include them only when compiling `ldb`
This diff reduced librocksdb.a from 42MB to 39MB on my mac (not stripped).
Test Plan: ran ldb
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17823
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary:
Add script auto_sanity_test.sh to perform auto sanity test
usage: auto_sanity_test.sh [new_commit] [old_commit]
Running without commit parameter will do the sanity test with the latest
and the latest 10 commit.
Test Plan: ./auto_sanity_test.sh
Reviewers: haobo, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17397
Summary: Added a function/command to check the consistency of live files' meta data
Test Plan:
Manual test (size mismatch, file not exist).
Command test script.
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16935
Summary:
We should clean up after ourselves. Last crashtest failed because the disk on the cibuild machine was full.
Also, db_crashtest is supposed to run the test on the same database in every iteration. This isn't the case currently, because every run creates a new tmp directory. It's fixed with this diff.
Test Plan: ran it
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17073
Summary: We switched to prefix_seek method of seeking. This means that anytime we check Valid(), we also need to check starts_with(prefix)
Test Plan: ran db_stress
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16953
Summary: We're trying to deprecate prefix iterators, so no need to test them in db_stress
Test Plan: ran it
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16917
Summary:
this should fix the hash_skip_list issue, but I still see seqno
assertion failure in the last run. Will continue investigating and
address that in a different diff
Test Plan: make whitebox_crash_test
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16851
Summary:
Hash skip list has issues, causing db_stress to fail badly.
For now, switching back to skip_list by default before we figure out root cause.
Test Plan: db_stress is happy(ier)
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16845
Summary: Syncing in stress test makes it run much much much slower. It also doesn't add much value IMO.
Test Plan: no
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16839
Summary:
*) fixed the comment
*) constant 1 was not casted to 64-bit, which (I think) might cause overflow if we shift it too much
*) default prefix size to be 7, like it was before
Test Plan: compiled
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16827
Summary: A bad Auto-Merge caused log buffer is flushed twice. Remove the unintended one.
Test Plan: Should already be tested (the code looks the same as when I ran unit tests).
Reviewers: haobo, igor
Reviewed By: haobo
CC: ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16821
Summary: as title
Test Plan: running python tools/db_crashtest.py
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16803
Summary: Fix the db_stress test, let is run with HashSkipList for real
Test Plan:
python tools/db_crashtest.py
python tools/db_crashtest2.py
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16773
Summary:
I had this diff for a while to test column families implementation. Last night, I ran it sucessfully for 10 hours with the command:
time ./db_stress --threads=30 --ops_per_thread=200000000 --max_key=5000 --column_families=20 --clear_column_family_one_in=3000000 --verify_before_write=1 --reopen=50 --max_background_compactions=10 --max_background_flushes=10 --db=/tmp/db_stress
It is ready to be committed :)
Test Plan: Ran it for 10 hours
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16797
Summary:
(1) Fix SanitizeOptions() to also check HashLinkList. The current
dynamic case just happens to work because the 2 classes have the same
layout.
(2) Do not delete SliceTransform object in HashSkipListFactory and
HashLinkListFactory destructor. Reason: SanitizeOptions() enforces
prefix_extractor and SliceTransform to be the same object when
Hash**Factory is used. This makes the behavior strange: when
Hash**Factory is used, prefix_extractor will be released by RocksDB. If
other memtable factory is used, prefix_extractor should be released by
user.
Test Plan: db_bench && make asan_check
Reviewers: haobo, igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16587
Summary:
If the last byte of the timestamp is 0, the output value of the ttl db
can cut off earlier. Change to compare hex format instead.
Test Plan:
this does not happen consistently, but it did not fail after the last
100 runs
for i in {1..100}; do python ./tools/ldb_test.py; done
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16725
Summary:
@kailiu mentioned on meeting yesterday that we sometimes have trouble opening DB created by old version with the new version. This will be very important to test for column families, since I'm changing disk format for the MANIFEST.
I added a tool that can help us test that. Usage:
./db_sanity_test <path> create
will create a bunch of DBs under <path>
<change RocksDB version>
./db_sanity_test <path> verify
will verify consistency of DBs created under <path>
Test Plan: ran the db_sanity_test
Reviewers: kailiu, dhruba, haobo
Reviewed By: kailiu
CC: leveldb, kailiu, xjin
Differential Revision: https://reviews.facebook.net/D16605
Summary:
Why don't we automatically reopen DB when running crash test (running in our nightly build)? If I understand correctly, crashtest is manually reopenning the DB, but then the DB does not check its consistency when you kill db_stress process and then re-run it again.
Does this make sense?
Test Plan: not reall
Reviewers: dhruba, haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16167
Summary:
We are going to expose properties of all tables to end users through "some" db interface.
However, current design doesn't naturally fit for this need, which is because:
1. If a table presents in table cache, we cannot simply return the reference to its table properties, because the table may be destroy after compaction (and we don't want to hold the ref of the version).
2. Copy table properties is OK, but it's slow.
Thus in this diff, I change the table reader's interface to return a shared pointer (for const table properties), instead a const refernce.
Test Plan: `make check` passed
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15999
