Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary:
Fixed db_stress by correcting the verification of column family
names in the Listener of db_stress
Test Plan: db_stress
Reviewers: igor, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39255
Summary: Fixed a compile warning in db_stress in NDEBUG mode.
Test Plan: make OPT=-DNDEBUG db_stress
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39213
Summary:
Fixed the following compile warning in db_stress:
error: 'OnCompactionCompleted' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
Test Plan: make db_stress
Reviewers: sdong, igor, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39207
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
Summary:
Fix the following compile warning in db_stress.cc on Mac
tools/db_stress.cc:1688:52: error: format specifies type 'unsigned long' but the argument has type '::google::uint64' (aka 'unsigned long long') [-Werror,-Wformat]
fprintf(stdout, "DB-write-buffer-size: %lu\n", FLAGS_db_write_buffer_size);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
%llu
Test Plan:
make
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary:
Make db_stress built for ROCKSDB_LITE.
The test doesn't pass tough. It seg fault quickly. But I took a look and it doesn't seem to be related to lite version. Likely to be a bug inside RocksDB.
Test Plan: make db_stress
Reviewers: yhchiang, rven, ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28797
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: Previously I made `make check` work with -Wshadow, but there are some tools that are not compiled using `make check`.
Test Plan: make all
Reviewers: yhchiang, rven, ljin, sdong
Reviewed By: ljin, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28497
Summary: as title
Test Plan: ./db_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28269
Summary:
Added two flags which operate as follows:
in_place_update: enable in_place_update for default column family
set_in_place_one_in: toggles the value of the option inplace_update_support with a probability of 1/N
Test Plan:
Run db_stress with the two flags above set.
Specifically tried in_place_update set to true and set_in_place_one_in set to 10,000.
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28029
Summary: Allow SetOptions() during db_stress test
Test Plan: make crash_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D25497
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary:
1. assert db->Put to be true in db_stress
2. begin column family with name "1".
Test Plan: 1. ./db_stress
Reviewers: ljin, yhchiang, dhruba, sdong, igor
Reviewed By: sdong, igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22659
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
All public headers need to be under `include/rocksdb` directory. Otherwise, clients include our header files like this:
#include <rocksdb/db.h>
#include <utilities/backupable_db.h> // still our public header!
Also, internally, we include:
#include "utilities/backupable/backupable_db.h" // internal header
#include "utilities/backupable_db.h" // public header
which is confusing.
This way, when we install rocksdb as a system library, we can just copy `include/rocksdb` directory to system's header files. We can't really copy `utilities` directory to system's header files.
Test Plan: compiles
Reviewers: dhruba, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20409
Summary:
Now that the arena is used to allocate space for hashskiplist's bucket. The bucket size
need to be set small enough to avoid "should_flush_" failure in memtable's assertion.
Test Plan:
make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: igor
Differential Revision: https://reviews.facebook.net/D19371
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary: Provide an convenience option to create column families if they are missing from the DB. Task #4460490
Test Plan: added unit test. also, stress test for some time
Reviewers: sdong, haobo, dhruba, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D18951
Summary: Add an option to indicates the variation of background threads. If the flag is not 0, for every 100 milliseconds, adjust thread pool size to a value within the range.
Test Plan: run db_stress
Reviewers: haobo, dhruba, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D18759
Summary:
Newer gflags switched from `google` namespace to `gflags` namespace. See: https://github.com/facebook/rocksdb/issues/139 and https://github.com/facebook/rocksdb/issues/102
Unfortunately, they don't define any macro with their namespace, so we need to actually try to compile gflags with two different namespace to figure out which one is the correct one.
Test Plan: works in fbcode environemnt. I'll also try in ubutnu with newer gflags
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18537
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
Currently, whenever DB Verification fails we bail out by calling `exit(1)`. This is kind of bad since it causes unclean shutdown and spew of error log messages like:
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
05:03:27 pthread lock: Invalid argument
This diff adds a new parameter that is set to true when verification fails. It can then use the parameter to bail out safely.
Test Plan: Casued artificail failure. Verified that exit was clean.
Reviewers: dhruba, haobo, ljin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18243
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary: We switched to prefix_seek method of seeking. This means that anytime we check Valid(), we also need to check starts_with(prefix)
Test Plan: ran db_stress
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16953
Summary: We're trying to deprecate prefix iterators, so no need to test them in db_stress
Test Plan: ran it
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16917
Summary:
this should fix the hash_skip_list issue, but I still see seqno
assertion failure in the last run. Will continue investigating and
address that in a different diff
Test Plan: make whitebox_crash_test
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16851
Summary:
Hash skip list has issues, causing db_stress to fail badly.
For now, switching back to skip_list by default before we figure out root cause.
Test Plan: db_stress is happy(ier)
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16845
Summary:
*) fixed the comment
*) constant 1 was not casted to 64-bit, which (I think) might cause overflow if we shift it too much
*) default prefix size to be 7, like it was before
Test Plan: compiled
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16827
Summary: as title
Test Plan: running python tools/db_crashtest.py
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16803
Summary: Fix the db_stress test, let is run with HashSkipList for real
Test Plan:
python tools/db_crashtest.py
python tools/db_crashtest2.py
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16773
Summary:
I had this diff for a while to test column families implementation. Last night, I ran it sucessfully for 10 hours with the command:
time ./db_stress --threads=30 --ops_per_thread=200000000 --max_key=5000 --column_families=20 --clear_column_family_one_in=3000000 --verify_before_write=1 --reopen=50 --max_background_compactions=10 --max_background_flushes=10 --db=/tmp/db_stress
It is ready to be committed :)
Test Plan: Ran it for 10 hours
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16797
Summary:
(1) Fix SanitizeOptions() to also check HashLinkList. The current
dynamic case just happens to work because the 2 classes have the same
layout.
(2) Do not delete SliceTransform object in HashSkipListFactory and
HashLinkListFactory destructor. Reason: SanitizeOptions() enforces
prefix_extractor and SliceTransform to be the same object when
Hash**Factory is used. This makes the behavior strange: when
Hash**Factory is used, prefix_extractor will be released by RocksDB. If
other memtable factory is used, prefix_extractor should be released by
user.
Test Plan: db_bench && make asan_check
Reviewers: haobo, igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16587
Summary: By removing some includes form options.h and reply on forward declaration, we can more easily reason the dependencies.
Test Plan: make all check
Reviewers: kailiu, haobo, igor, dhruba
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15411
Summary:
It looks like we might have some trouble when building the new release with 4.8, since fbcode is using glibc2.17-fb by default and we are using glibc2.17. It was reported by Benjamin Renard in our internal group.
This diff moves our fbcode build to use glibc2.17-fb by default. I got some linker errors when compiling, complaining that `google::SetUsageMessage()` was undefined. After deleting all offending lines, the compile was successful and everything works.
Test Plan:
Compiled
Ran ./db_bench ./db_stress ./db_repl_stress
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15405
Summary: I'm separating code-cleanup part of https://reviews.facebook.net/D14517. This will make D14517 easier to understand and this diff easier to review.
Test Plan: make check
Reviewers: haobo, kailiu, sdong, dhruba, tnovak
Reviewed By: tnovak
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15099
Summary:
Let's get rid of TransformRep and it's children. We have confirmed that HashSkipListRep works better with multifeed, so there is no benefit to keeping this around.
This diff is mostly just deleting references to obsoleted functions. I also have a diff for fbcode that we'll need to push when we switch to new release.
I had to expose HashSkipListRepFactory in the client header files because db_impl.cc needs access to GetTransform() function for SanitizeOptions.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14397
Summary:
These bugs were caught by ASAN crash test.
1. The first one, in table/filter_block.cc is very nasty. We first reference entries_ and store the reference to Slice prev. Then, we call entries_.append(), which can change the reference. The Slice prev now points to junk.
2. The second one is a bug in a test, so it's not very serious. Once we set read_opts.prefix, we never clear it, so some other function might still reference it.
Test Plan: asan crash test now runs more than 5 mins. Before, it failed immediately. I will run the full one, but the full one takes quite some time (5 hours)
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14223
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary: This diff leverage the existing block cache and extend it to cache index/filter block.
Test Plan:
Added new tests in db_test and table_test
The correctness is checked by:
1. make check
2. make valgrind_check
Performance is test by:
1. 10 times of build_tools/regression_build_test.sh on two versions of rocksdb before/after the code change. Test results suggests no significant difference between them. For the two key operatons `overwrite` and `readrandom`, the average iops are both 20k and ~260k, with very small variance).
2. db_stress.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo, xjin
Differential Revision: https://reviews.facebook.net/D13167
Summary:
Rocksdb can now support a uncompressed block cache, or a compressed
block cache or both. Lookups first look for a block in the
uncompressed cache, if it is not found only then it is looked up
in the compressed cache. If it is found in the compressed cache,
then it is uncompressed and inserted into the uncompressed cache.
It is possible that the same block resides in the compressed cache
as well as the uncompressed cache at the same time. Both caches
have their own individual LRU policy.
Test Plan: Unit test case attached.
Reviewers: kailiu, sdong, haobo, leveldb
Reviewed By: haobo
CC: xjin, haobo
Differential Revision: https://reviews.facebook.net/D12675
Summary: Converted db_stress, db_repl_stress and db_bench to use gflags
Test Plan: I tested by printing out all the flags from old and new versions. Tried defaults, + various combinations with "interesting flags". Also, tested by running db_crashtest.py and db_crashtest2.py.
Reviewers: emayanke, dhruba, haobo, kailiu, sdong
Reviewed By: emayanke
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D13581
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Will use iterators to verify keys in the db for half of its keys and Gets for the other half.
Test Plan: ./db_stress --max_key=1000 --ops_per_thread=100
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13227
Summary: Using an iterator instead of the Get method, each thread goes through a portion of the database and verifies values by comparing to the shared state.
Test Plan:
./db_stress --db=/tmp/tmppp --max_key=10000 --ops_per_thread=10000
To test some basic cases, the following lines can be added (each set in turn) to the verifyDb method with the following expected results:
// Should abort with "Unexpected value found"
shared.Delete(start);
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start));
// Should succeed
WriteOptions write_opts;
shared.Delete(start);
db_->Delete(write_opts, Key(start));
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start + (end-start)/2));
// Should abort with "Value not found"
db_->Delete(write_opts, Key(end-1));
// Should abort with "Unexpected value"
shared.Delete(end-1);
// Should abort with "Unexpected value"
shared.Delete(start + (end-start)/2);
// Should abort with "Value not found"
db_->Delete(write_opts, Key(start));
shared.Delete(start);
db_->Delete(write_opts, Key(end-1));
db_->Delete(write_opts, Key(end-2));
To test the out of range abort, change the key in the for loop to Key(i+1), so that the key defined by the index i is now outside of the supposed range of the database.
Reviewers: emayanke
Reviewed By: emayanke
CC: dhruba, xjin
Differential Revision: https://reviews.facebook.net/D13071
Summary:
Added MultiIterate() which does a seek and some Next/Prev
calls. Iterator status is checked only, no data integrity check
Test Plan:
make db_stress
./db_stress --iterpercent=<nonzero value> --readpercent=, etc.
Reviewers: emayanke, dhruba, xjin
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12915
Summary:
Added a new field called max_size_amplification_ratio in the
CompactionOptionsUniversal structure. This determines the maximum
percentage overhead of space amplification.
The size amplification is defined to be the ratio between the size of
the oldest file to the sum of the sizes of all other files. If the
size amplification exceeds the specified value, then min_merge_width
and max_merge_width are ignored and a full compaction of all files is done.
A value of 10 means that the size a database that stores 100 bytes
of user data could occupy 110 bytes of physical storage.
Test Plan: Unit test DBTest.UniversalCompactionSpaceAmplification added.
Reviewers: haobo, emayanke, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12825
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This patch adds three new MemTableRep's: UnsortedRep, PrefixHashRep, and VectorRep.
UnsortedRep stores keys in an std::unordered_map of std::sets. When an iterator is requested, it dumps the keys into an std::set and iterates over that.
VectorRep stores keys in an std::vector. When an iterator is requested, it creates a copy of the vector and sorts it using std::sort. The iterator accesses that new vector.
PrefixHashRep stores keys in an unordered_map mapping prefixes to ordered sets.
I also added one API change. I added a function MemTableRep::MarkImmutable. This function is called when the rep is added to the immutable list. It doesn't do anything yet, but it seems like that could be useful. In particular, for the vectorrep, it means we could elide the extra copy and just sort in place. The only reason I haven't done that yet is because the use of the ArenaAllocator complicates things (I can elaborate on this if needed).
Test Plan:
make -j32 check
./db_stress --memtablerep=vector
./db_stress --memtablerep=unsorted
./db_stress --memtablerep=prefixhash --prefix_size=10
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12117
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test
Reviewers: haobo, emayanke
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D12381
Summary:
Updated db_bench and utilities/merge_operators.h to allow for dynamic benchmarking
of merge operators in db_bench. Added a new test (--benchmarks=mergerandom), which performs
a bunch of random Merge() operations over random keys. Also added a "--merge_operator=" flag
so that the tester can easily benchmark different merge operators. Currently supports
the PutOperator and UInt64Add operator. Support for stringappend or list append may come later.
Test Plan:
1. make db_bench
2. Test the PutOperator (simulating Put) as follows:
./db_bench --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom --merge_operator=put
--threads=2
3. Test the UInt64AddOperator (simulating numeric addition) similarly:
./db_bench --value_size=8 --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom
--merge_operator=uint64add --threads=2
Reviewers: haobo, dhruba, zshao, MarkCallaghan
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11535
Summary:
Minor fix to current codes, including: coding style, output format,
comments. No major logic change. There are only 2 real changes, please see my inline comments.
Test Plan: make all check
Reviewers: haobo, dhruba, emayanke
Differential Revision: https://reviews.facebook.net/D12297
Summary: rocksdb replicaiton will need this when writing value+TS from master to slave 'as is'
Test Plan: make
Reviewers: dhruba, vamsi, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11919
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary: db_stress should alos print complete statistics like db_bench. Needed this when I wanted to measure number of delete-IOs dropped due to CheckKeyMayExist to be introduced to rocksdb codebase later- to make deltes in rocksdb faster
Test Plan: make db_stress;./db_stress --max_key=100 --ops_per_thread=1000 --statistics=1
Reviewers: sheki, dhruba, vamsi, haobo
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D11655
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
