Commit Graph

727 Commits

Author SHA1 Message Date
Yi Wu
a92049e3e7 Added EventListener::OnTableFileCreationStarted() callback
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.

Test Plan: unit test.

Reviewers: dhruba, yhchiang, ott, sdong

Reviewed By: sdong

Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba

Differential Revision: https://reviews.facebook.net/D56337
2016-04-29 11:35:00 -07:00
Li Peng
6d4832a998 Merge pull request #1101 from flyd1005/wip-fix-typo
fix typos and remove duplicated words
2016-04-28 02:30:44 -07:00
Andrew Kryczka
843d2e3137 Shared dictionary compression using reference block
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.

During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.

On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.

Test Plan: new unit test

Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong

Reviewed By: sdong

Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D52287
2016-04-27 17:36:03 -07:00
sdong
ac0e54b4c6 CompactedDB should not be used if there is outstanding WAL files
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.

Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.

Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D57057
2016-04-26 14:22:07 -07:00
Dmitri Smirnov
ee221d2de0 Introduce XPRESS compresssion on Windows. (#1081)
Comparable with Snappy on comp ratio.
  Implemented using Windows API, does not require external package.
  Avaiable since Windows 8 and server 2012.
  Use -DXPRESS=1 with CMake to enable.
2016-04-19 22:54:24 -07:00
Yi Wu
792762c42c Split db_test.cc
Summary: Split db_test.cc into several files. Moving several helper functions into DBTestBase.

Test Plan: make check

Reviewers: sdong, yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: dhruba, andrewkr, kradhakrishnan, yhchiang, leveldb, sdong

Differential Revision: https://reviews.facebook.net/D56715
2016-04-18 09:42:50 -07:00
sdong
6d436a3f85 DBTest.HardLimit made more deterministic
Summary: In DBTest.HardLimit, multiple flushes may merge into one, based on thread scheduling. Avoid it by waiting each flush to finish before generating the next one.

Test Plan: Run test in parallel several times and see it doesn't fail any more.

Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: yiwu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56853
2016-04-15 17:36:57 -07:00
Dmitri Smirnov
c9d668c584 Fix unit tests issues on Windows (#1078) 2016-04-14 17:33:53 -07:00
Jay Edgar
2448f80375 Make sure that if use_mmap_reads is on use_os_buffer is also on
Summary: The code assumes that if use_mmap_reads is on then use_os_buffer is also on.  This make sense as by using memory mapped files for reading you are expecting the OS to cache what it needs.  Add code to make sure the user does not turn off use_os_buffer when they turn on use_mmap_reads

Test Plan: New test: DBTest.MMapAndBufferOptions

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56397
2016-04-08 14:30:15 -07:00
sdong
2feafa3db9 Change some RocksDB default options
Summary: Change some RocksDB default options to make it more friendly to server workloads.

Test Plan: Run all existing tests

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D55941
2016-03-31 17:12:18 -07:00
Praveen Rao
136b8e0cad Merge from master 2016-03-22 12:38:44 -07:00
Praveen Rao
2dcbb3b4f3 Addressed review comments 2016-03-22 12:07:15 -07:00
sdong
b1fafcaca6 Revert "Adding pin_l0_filter_and_index_blocks_in_cache feature."
This reverts commit 522de4f59e.

It has bug of index block cleaning up.
2016-03-21 11:50:42 -07:00
Praveen Rao
7d371863e5 travis build fixes 2016-03-18 14:43:22 -07:00
Praveen Rao
4f1c74a46e merge from master 2016-03-18 12:48:01 -07:00
Praveen Rao
f8c2189307 Publish log numbers for column family to wal_filter, and provide log number in the record callback 2016-03-18 12:32:15 -07:00
Marton Trencseni
44756260ae Reset block cache in failing unit test.
Test Plan: make -j40 check OPT=-g, on both /tmp and /dev/shm

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D55701
2016-03-18 06:13:54 +00:00
Marton Trencseni
522de4f59e Adding pin_l0_filter_and_index_blocks_in_cache feature.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.

Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).

DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
  Mac: OK.
  Linux: with D55287 patched in it's OK.

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54801
2016-03-17 22:40:01 +00:00
Islam AbdelRahman
580fede347 Aggregate hot Iterator counters in LocalStatistics (DBIter::Next perf regression)
Summary:
This patch bump the counters in the frequent code path DBIter::Next() / DBIter::Prev() in a local data members and send them to Statistics when the iterator is destroyed
A better solution will be to have thread_local implementation for Statistics

New performance
```
readseq      :       0.035 micros/op 28597881 ops/sec; 3163.7 MB/s
     1,851,568,819      stalled-cycles-frontend   #   31.29% frontend cycles idle    [49.86%]
       884,929,823      stalled-cycles-backend    #   14.95% backend  cycles idle    [50.21%]
readreverse  :       0.071 micros/op 14077393 ops/sec; 1557.3 MB/s
     3,239,575,993      stalled-cycles-frontend   #   27.36% frontend cycles idle    [49.96%]
     1,558,253,983      stalled-cycles-backend    #   13.16% backend  cycles idle    [50.14%]

```

Existing performance

```
readreverse  :       0.174 micros/op 5732342 ops/sec;  634.1 MB/s
    20,570,209,389      stalled-cycles-frontend   #   70.71% frontend cycles idle    [50.01%]
    18,422,816,837      stalled-cycles-backend    #   63.33% backend  cycles idle    [50.04%]

readseq      :       0.119 micros/op 8400537 ops/sec;  929.3 MB/s
    15,634,225,844      stalled-cycles-frontend   #   79.07% frontend cycles idle    [49.96%]
    14,227,427,453      stalled-cycles-backend    #   71.95% backend  cycles idle    [50.09%]
```

Test Plan: unit tests

Reviewers: yhchiang, sdong, igor

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D55107
2016-03-11 19:01:12 -08:00
sdong
74b660702e Rename iterator property "rocksdb.iterator.is.key.pinned" => "rocksdb.iterator.is-key-pinned"
Summary: Rename iterator property to folow property naming convention.

Test Plan: Run all existing tests.

Reviewers: andrewkr, anthony, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54957
2016-03-01 13:47:12 -08:00
Islam AbdelRahman
6743135ea1 Fix DB::AddFile() issue when PurgeObsoleteFiles() is called
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue

Test Plan:
unit test to reproduce the bug
existing unit tests

Reviewers: sdong, yhchiang, andrewkr

Reviewed By: andrewkr

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D54627
2016-03-01 12:05:29 -08:00
sdong
1f5954147b Introduce Iterator::GetProperty() and replace Iterator::IsKeyPinned()
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator

Test Plan: Rerun existing tests and add a negative test case.

Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54783
2016-02-29 14:01:31 -08:00
Islam AbdelRahman
df9ba6df62 Introduce SstFileManager::SetMaxAllowedSpaceUsage() to cap disk space usage
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()

Test Plan: unit testing

Reviewers: yhchiang, anthony, andrewkr, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D53763
2016-02-17 15:20:23 -08:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Yueh-Hsuan Chiang
4a8cbf4e31 Allows Get and MultiGet to read directly from SST files.
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.

    kSstFileTier = 0x2      // data in SST files.
                          // Note that this ReadTier currently only supports
                          // Get and MultiGet and does not support iterators.

Test Plan: add new test in db_test.

Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: igor, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D53511
2016-02-09 11:20:22 -08:00
sdong
a76e9093f0 Fix LITE db_test build broken by previous commit
Summary: Previous commit introduces a test that is not supported in LITE. Fix it.

Test Plan: Build the test with ROCKSDB_LITE.

Reviewers: kradhakrishnan, IslamAbdelRahman, anthony, yhchiang, andrewkr

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D53901
2016-02-05 14:29:09 -08:00
sdong
b1887c5dd9 Explictly fail when memtable doesn't support concurrent insert
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.

Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.

Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson

Reviewed By: ngbronson

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D53895
2016-02-05 14:15:50 -08:00
reid horuff
6f71d3b68b Improve perf of Pessimistic Transaction expirations (and optimistic transactions)
Summary:
copy from task 8196669:

1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.

In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write.  But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.

To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together.  Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.

Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.

Reviewers: hermanlee4, anthony, ngbronson

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52863
2016-02-05 10:44:13 -08:00
Islam AbdelRahman
8e6172bc57 Add BlockBasedTableOptions::index_block_restart_interval
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block

Test Plan: unit tests

Reviewers: yhchiang, anthony, andrewkr, sdong

Reviewed By: sdong

Subscribers: march, dhruba

Differential Revision: https://reviews.facebook.net/D53721
2016-02-05 10:22:37 -08:00
sdong
ad7ecca72d Add unit tests to verify large key/value
Summary:
Add unit tests:
(1) insert entries of 8MB key and 3GB value to DB
(2) insert entry of 3GB key and 3GB value into write batch and make sure we can read it.
(3) insert 3 billions of key-value pairs into write batch and make sure we can read it.
Disable them because not all platform can run it.

Test Plan: Run the tests

Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony

Reviewed By: anthony

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D53619
2016-02-01 15:09:50 -08:00
Islam AbdelRahman
d6c838f1e1 Add SstFileManager (component tracking all SST file in DBs and control the deletion rate)
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size

Test Plan: unit tests

Reviewers: rven, anthony, yhchiang, sdong

Reviewed By: sdong

Subscribers: igor, lovro, march, dhruba

Differential Revision: https://reviews.facebook.net/D50469
2016-01-28 18:35:01 -08:00
sdong
d20915d52a Disable stats about mutex duration by default
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.

Test Plan: Add a unit test to make sure it is off by default.

Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang

Reviewed By: yhchiang

Subscribers: MarkCallaghan, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D53367
2016-01-26 14:56:55 -08:00
Islam AbdelRahman
0c433cd1eb Fix issue in Iterator::Seek when using Block based filter block with prefix_extractor
Summary: Similar to D53385 we need to check InDomain before checking the filter block.

Test Plan: unit tests

Reviewers: yhchiang, rven, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D53421
2016-01-26 14:47:42 -08:00
Andrew Kryczka
035857a312 Fix RocksDB lite build
Summary:
NewMemEnv() is defined in rocksdb lite but just returns nullptr --
would it be better to just not define it so we can catch issues like this at
compile-time?

Test Plan:
  $ make clean && OPT="-DTRAVIS -DROCKSDB_LITE" V=1 make -j32 db_test
  $ ./db_test --gtest_filter='DBTest.MemEnvTest'
  ...
  [  PASSED  ] 0 tests.

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D53427
2016-01-26 13:15:36 -08:00
Islam AbdelRahman
b0afcdeeac Fix bug in block based tables with full filter block and prefix_extractor
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor

the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()

Test Plan: unit tests

Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D53385
2016-01-26 11:07:08 -08:00
Andrew Kryczka
167bd8856d [directory includes cleanup] Finish removing util->db dependencies 2016-01-26 10:49:24 -08:00
sdong
da33dfe188 Parameterize DBTest.Randomized
Summary: Break down DBTest.Randomized to multiple gtest tests based on config type

Test Plan: Run the test and all tests. Make sure configurations are correctly set

Reviewers: yhchiang, IslamAbdelRahman, rven, kradhakrishnan, andrewkr, anthony

Reviewed By: anthony

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D53247
2016-01-25 14:49:08 -08:00
Islam AbdelRahman
2fbc59a348 Disallow SstFileWriter from creating empty sst files
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted

Test Plan: make check

Reviewers: yhchiang, rven, anthony, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D52815
2016-01-25 13:47:07 -08:00
agiardullo
8019aa9b55 improve test for manifest write failure
Summary: Improve testing per discussion in D52989

Test Plan: ran test

Reviewers: sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D53211
2016-01-22 11:47:59 -08:00
Andrew Kryczka
eceb5cb1b7 Split db_test.cc (part 1: properties)
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.

Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.

Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D52995
2016-01-20 15:17:52 -08:00
David Bernard
3f12e16f27 Make alloca.h optional 2016-01-19 06:17:31 +00:00
David Bernard
d78c6b28c4 Changes for build on solaris
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
2016-01-19 04:45:21 +00:00
agiardullo
a2422f0533 fix potential test SleepingTask race condition
Summary: Make sure SleepingTask has bene run before it goes out of scope.

Test Plan: run test

Reviewers: kradhakrishnan

Reviewed By: kradhakrishnan

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D52581
2016-01-06 11:51:09 -08:00
Nathan Bronson
ac16663bd6 use -Werror=missing-field-initializers, to closer match MyRocks build
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors).  This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result.  I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.

Test Plan: make check

Reviewers: sdong, rven

Reviewed By: rven

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D52443
2015-12-30 14:56:18 -08:00
Siying Dong
22c0ed8a5f Disable Visual Studio Warning C4351
Currently Windows build is broken because of Warning C4351. Disable the warning before figuring out the right way to fix it.
2015-12-28 15:06:34 -08:00
sdong
5b2587b5cb DBTest.HardLimit use special memtable
Summary: DBTest.HardLimit fails in appveyor build. Use special mem table to make the test behavior depends less on platform

Test Plan: Run the test with JEMALLOC both on and off.

Reviewers: yhchiang, kradhakrishnan, rven, anthony, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52317
2015-12-25 10:25:34 -08:00
Siying Dong
298ba27ae2 Merge pull request #846 from yuslepukhin/enble_c4244_lossofdata
Enable MS compiler warning c4244.
2015-12-23 22:59:42 -08:00
sdong
d43da8ae0d DBTest.DelayedWriteRate: fix assert of sign and unsign comparison
Summary: DBTest.DelayedWriteRate has sign and unsign comparisons that break Windows build. Fix it.

Test Plan: Build and run the test modified.

Reviewers: IslamAbdelRahman, rven, anthony, yhchiang, kradhakrishnan

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52311
2015-12-23 22:38:12 -08:00
sdong
b9f77ba12b When slowdown is triggered, reduce the write rate
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.

Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000

and make sure without the commit, write stop will happen, but with the commit, it will not happen.

Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52131
2015-12-23 11:33:15 -08:00
Andrew Kryczka
445d5b8c5c Fix clang build
Summary:
Missed this in https://reviews.facebook.net/D51633 because I didn't
wait for 'make commit-prereq' to finish

Test Plan: make clean && USE_CLANG=1 make -j32 all

Reviewers: IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D52275
2015-12-23 10:49:42 -08:00