Summary:
The patch fixes an improbable race condition between AddPrepared from one write queue and AdvanceMaxEvictedSeq from another queue. In this scenario AddPrepared finds prepare_seq lower than max and adding to PrepareHeap as usual while AdvanceMaxEvictedSeq has finished checking PrepareHeap against the future max. Thus when AdvanceMaxEvictedSeq finishes off by updating the max_evicted_seq_, PrepareHeap ends up with a prepared_seq lower than it which breaks the PrepareHeap contract. The fix is that in AddPrepared we check against the future_max_evicted_seq_ instead, which is update before AdvanceMaxEvictedSeq acquire prepare_mutex_ and looks into PrepareHeap.
A unit test added to test for the failure scenario. The code is also refactored a bit to remove the duplicate code between AdvanceMaxEvictedSeq and AddPrepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5025
Differential Revision: D14249028
Pulled By: maysamyabandeh
fbshipit-source-id: 072ea56663f40359662c05fafa6ac524417b0622
Summary:
The patch adds the sequence number of the rollback patch to the PrepareHeap when two_write_queues is enabled. Although the current behavior is still correct, the change simplifies reasoning about the code, by having all uncommitted batches registered with the PreparedHeap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5026
Differential Revision: D14249401
Pulled By: maysamyabandeh
fbshipit-source-id: 1e3424edee5cd14e56ee35931ad3c93ed997cd5a
Summary:
When two_write_queues is enabled we call ::AddPrepared only from the main queue, which writes to both WAL and memtable, and call ::AddCommitted from the 2nd queue, which writes only to WAL. This simplifies the logic by avoiding concurrency between AddPrepared and also between AddCommitted. The patch fixes one case that did not conform with the rule above. This would allow future refactoring. For example AdvaneMaxEvictedSeq, which is invoked by AddCommitted, can be simplified by assuming lack of concurrent calls to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5014
Differential Revision: D14210493
Pulled By: maysamyabandeh
fbshipit-source-id: 6db5ba372a294a568a14caa010576460917a4eab
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
When closing a BlobDB, it only waits for background tasks
to finish as the last thing, but the background task may access
some variables that are destroyed. The fix is to introduce a
shutdown function in the timer queue and call the function as
the first thing when destorying BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5005
Differential Revision: D14170342
Pulled By: siying
fbshipit-source-id: 081e6a2d99b9765d5956cf6cdfc290c07270c233
Summary:
Currently the transaction stress tests use thread id as the seed. Since the thread ids are likely to be the same across multiple runs, the seed is thus going to be the same. The patch includes time in calculating the seed to help covering a very different part of state space in each run of the stress tests. To be able to reproduce the bug in case the stress tests failed, it also prints out the time that was used to calculate the seed value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5004
Differential Revision: D14144356
Pulled By: maysamyabandeh
fbshipit-source-id: 728ed522f550fc8b4f5f9f373259c05fe9a54556
Summary:
The transaction stress tests, stress a high concurrency scenario. In WritePrepared/WriteUnPrepared we need to also stress the scenarios where an inserting/reading transaction is very slow. This would stress the corner cases that the caching is not sufficient and other slower data structures are engaged. To emulate such cases we make use of slow inserter/verifier threads and also reduce the size of cache data structures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4974
Differential Revision: D14143070
Pulled By: maysamyabandeh
fbshipit-source-id: 81eb674678faf9fae0f654cd60ebcc74e26aeee7
Summary:
max_evicted_seq_ could be updated in the middle of the read in ::IsInSnapshot. The code to be correct in presence of this update would be complicated. The patch simplifies it by checking the value of max_evicted_seq_ before and after looking into commit_cache_ and retries in the unlucky case that it was changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4955
Differential Revision: D13999556
Pulled By: maysamyabandeh
fbshipit-source-id: 7a1bdfa95ea8b5d8d73ddff3263ed31d7297b39c
Summary:
as title. For people who continue to need Lua compaction filter, you
can copy the include/rocksdb/utilities/rocks_lua/lua_compaction_filter.h and
utilities/lua/rocks_lua_compaction_filter.cc to your own codebase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4971
Differential Revision: D14047468
Pulled By: riversand963
fbshipit-source-id: 9ad1a6484a7c94e478f1e108127a3184e4069f70
Summary:
Enhance ::Insert and ::Verify test functions to add artificial delay between prepare and commit, and take snapshot and reads respectively. A future PR will make use of these to improve stress tests to test against long-running transactions as well as long-running backup jobs. Also randomly sets set_snapshot to false for inserters to skip setting the snapshot in the initialization phase and let the snapshot be taken later explicitly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4970
Differential Revision: D14031342
Pulled By: maysamyabandeh
fbshipit-source-id: b52b453751f0b25b81b23c48892bc1d152464cab
Summary:
WritePreparedTransactionDB operates with more options which should not be configurable to avoid complicating it for the users. For testing purposes however we need to change the default value of this parameters. This patch makes these parameters private fields in TransactionDBOptions so that the existing ::Open API could use them seamlessly without however exposing them to the users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4966
Differential Revision: D14015986
Pulled By: maysamyabandeh
fbshipit-source-id: 13037efa7dfdd6f73ec7a19414b66571e044c633
Summary:
ValidateSnapshot checks if another txn has committed a value to about-to-be-locked key since a particular snapshot. It applies an optimization of looking into only the memtable if snapshot seq is larger than the earliest seq in the memtables. With a long-running txn in WritePrepared, the prepared value might be flushed out to the disk and yet it commits after the snapshot, which breaks this optimization. The patch fixes that by disabling this optimization when the min_uncomitted seq at the time the snapshot was taken is lower than earliest seq in the memtables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4961
Differential Revision: D14009947
Pulled By: maysamyabandeh
fbshipit-source-id: 1d11679950326f7c4094b433e6b821b729f08850
Summary:
Commit of delayed prepared has two non-atomic steps: add to commit cache, remove from delayed_prepared_. Similarly in ::IsInSnapshot we read from commit cache first and then look into delayed_prepared_. Due to non-atomicity thus the reader might not find the
prep_seq that is just committed neither in commit cache nor in delayed_prepared_. To fix that i)
we check if there was any delayed prepared BEFORE looking into commit
cache, ii) if there was, we complete the search steps to be these: i)
commit cache, ii) delayed prepared, commit cache again. In this way if
the first query to commit cache missed the commit, the 2nd will catch it. The cost of the redundant read from commit cache is paid only if delayed_prepared_ is nonempty which should be a very rare scenario.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4947
Differential Revision: D13952754
Pulled By: maysamyabandeh
fbshipit-source-id: 8f47826b13f8ce154398d842028342423f4ca2b2
Summary:
WritePrepared maintains a list of snapshots that are <= max_evicted_seq_. Based on this list, old_commit_map_ is updated if an evicted commit entry overlaps with such snapshot. Such lists are garbage collected when the release of snapshot is reported to WritePreparedTxnDB, which is the next time max_evicted_seq_ is updated and yet the snapshot is not found is the list returned from DB. This logic was broken since ReleaseSnapshotInternal was using "< max_evicted_seq_" to cleanup old_commit_map_, which would leave a snapshot uncleaned if it "= max_evicted_seq_". The patch fixes that and adds a unit test to check for the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4944
Differential Revision: D13945000
Pulled By: maysamyabandeh
fbshipit-source-id: 0c904294f735911f52348a148bf1f945282fc17c
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889
Differential Revision: D13701276
Pulled By: zinoale
fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
Summary:
Blob DB files are not tracked by the SFM, so they currently don't get
deleted in the background. Force them to be deleted in background so
rate limiting can be applied
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4928
Differential Revision: D13854649
Pulled By: anand1976
fbshipit-source-id: 8031ce66842ff0af440c715d886b377983dad7d8
Summary:
Right now, deleting blob files is not rate limited, even if SstFileManger is specified.
On the other hand, rate limiting blob deletion is not supported. With this change, Blob file
deletion will go through SstFileManager too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4904
Differential Revision: D13772545
Pulled By: siying
fbshipit-source-id: bd1b1d0beb26d5167385e00b7ecb8b94b879de84
Summary:
Remove unused blob WAL filter so that users are not confused.
I was initially under the impression that we have WAL Filter support in BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4896
Differential Revision: D13725709
Pulled By: sagar0
fbshipit-source-id: f997d7546e138a474036e88b957907cc714327f1
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
Fix how CompactionIterator::findEarliestVisibleSnapshots handles released snapshot. It fixing the two scenarios:
Scenario 1:
key1 has two values v1 and v2. There're two snapshots s1 and s2 taken after v1 and v2 are committed. Right after compaction output v2, s1 is released. Now findEarliestVisibleSnapshot may see s1 being released, and return the next snapshot, which is s2. That's larger than v2's earliest visible snapshot, which was s1.
The fix: the only place we check against last snapshot and current key snapshot is when we decide whether to compact out a value if it is hidden by a later value. In the check if we see current snapshot is even larger than last snapshot, we know last snapshot is released, and we are safe to compact out current key.
Scenario 2:
key1 has two values v1 and v2. there are two snapshots s1 and s2 taken after v1 and v2 are committed. During compaction before we process the key, s1 is released. When compaction process v2, snapshot checker may return kSnapshotReleased, and the earliest visible snapshot for v2 become s2. When compaction process v1, snapshot checker may return kIsInSnapshot (for WritePrepared transaction, it could be because v1 is still in commit cache). The result will become inconsistent here.
The fix: remember the set of released snapshots ever reported by snapshot checker, and ignore them when finding result for findEarliestVisibleSnapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4890
Differential Revision: D13705538
Pulled By: maysamyabandeh
fbshipit-source-id: e577f0d9ee1ff5a6035f26859e56902ecc85a5a4
Summary:
Here is the order of ops in a commit: 1) update commit cache 2) publish seq, 3) RemovePrepared. In case of a delayed prepared, there will be a gap between when the commit is visible to snapshots until delayed_prepared_ is cleaned up. To tell apart this case from a delayed uncommitted txn from, the commit entry of a delayed prepared is also stored in delayed_prepared_commits_, which is updated before publishing the commit.
Also logic in GetSnapshotInternal that ensures that each new snapshot is always larger than max_evicted_seq_ is updated to check against the upcoming value of max_evicted_seq_ rather than its current one. This is because AdvanceMaxEvictedSeq gets the list of snapshots lower than the new max, before updating max_evicted_seq_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4894
Differential Revision: D13726988
Pulled By: maysamyabandeh
fbshipit-source-id: 1e70d78061b50c944c9816bf4b6dac405ab4ccd3
Summary:
Remove `garbage_collection_deletion_size_threshold` as it is not used anywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4888
Differential Revision: D13685982
Pulled By: sagar0
fbshipit-source-id: e08d3017b9a0c8fa99bc332b595ee4ed9db70c87
Summary:
Compaction iterator keep a copy of list of live snapshots at the beginning of compaction, and then query snapshot checker to verify if values of a sequence number is visible to these snapshots. However when the snapshot is released in the middle of compaction, the snapshot checker implementation (i.e. WritePreparedSnapshotChecker) may remove info with the snapshot and may report incorrect result, which lead to values being compacted out when it shouldn't. This patch conservatively keep the values if snapshot checker determines that the snapshots is released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4858
Differential Revision: D13617146
Pulled By: maysamyabandeh
fbshipit-source-id: cf18a94f6f61a94bcff73c280f117b224af5fbc3
Summary:
With WritePrepared transaction, flush/compaction can contain uncommitted keys, and those keys can get committed during compaction. If a snapshot is taken before the key is committed, it should not see the key. On the other hand, compaction grab the list of snapshots at its beginning, and only consider those snapshots to dedup keys. Consider the case:
```
seq = 1: put "foo" = "bar"
seq = 2: transaction T: delete "foo", prepare
seq = 3: compaction start
seq = 4: take snapshot S
seq = 5: transaction T: commit.
...
seq = N: compaction iterator reached key "foo".
```
When compaction start, the list of snapshot is empty. Compaction doesn't take snapshot S into account. When it reached "foo", transaction T is committed. Compaction may think the value "foo=bar" is not visible by any snapshot (which is wrong), and compact the value out.
The fix is to explicitly take a snapshot before compaction grabbing the list of snapshots. Compaction will then has to keep keys visible to this snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4883
Differential Revision: D13668775
Pulled By: maysamyabandeh
fbshipit-source-id: 1cab9615f94b7d3e8522cc3d44c3a14c7d4720e4
Summary:
The AdvanceMaxEvictedSeq algorithm assumes that new snapshots always have sequence number larger than the last max_evicted_seq_. To enforce this assumption we make two changes:
i) max is not advanced beyond the last published seq, with the exception that the evicted commit entry itself is not published yet, which is quite rare.
ii) When obtaining the snapshot if the max_evicted_seq_ is not published yet, commit a dummy entry so that it waits for it to be published and also increased the latest published seq by one above the max.
To test these non-realistic corner cases we create a commit cache with size 1 so that every single commit results into eviction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4886
Differential Revision: D13685270
Pulled By: maysamyabandeh
fbshipit-source-id: 5461bc09c2a9b75798bfcb9853a256c81cdac0b0
Summary:
- Corrected a comment asserting that the values "smaller" than a min_blob_size will be inlined in the base db.
- Also fixed the type of ttl_range_secs while dumping blobdb options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4887
Differential Revision: D13680163
Pulled By: sagar0
fbshipit-source-id: 306c8cf2daa52210ffc334a6924ef44ffdedf887
Summary:
When prepared_txns_ heap is empty, SmallestUnCommittedSeq() should check delayed_prepared_ set as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4867
Differential Revision: D13632134
Pulled By: maysamyabandeh
fbshipit-source-id: b0423bb0a58dc95f1e636d5ed3f6e619df801fb7
Summary:
Fixes a typo that made mutex_ to remain unlocked when GetSnapshotListFromDB called from WritePreparedTxnDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4872
Differential Revision: D13640381
Pulled By: maysamyabandeh
fbshipit-source-id: 50f6600568f9092b4b43115f6ebd96e6c7388ad7
Summary:
currently clang analyze fails with the following warning:
> utilities/transactions/write_prepared_transaction_test.cc:1451:5: warning: Forming reference to null pointer
ASSERT_GT(wp_db->max_evicted_seq_, 0); // max after recovery
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4871
Differential Revision: D13638053
Pulled By: miasantreble
fbshipit-source-id: b192b0c13c411c58defc9e280b34cdfcab3fa8e3
Summary:
Remove some components that we never heard people using them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4101
Differential Revision: D8825431
Pulled By: siying
fbshipit-source-id: 97a12ad3cad4ab12c82741a5ba49669aaa854180
Summary:
Previously IsInSnapshot assumed that the snapshot is valid at the time that the function is called. However there are cases where that might not be valid. Example is background compactions where the compaction algorithm operates with a list of snapshots some of which might be released by the time they are being passed to IsInSnapshot. The patch make two changes to enable the caller to tell difference: i) any live snapshot below max is added to max_committed_seq_, which allows IsInSnapshot to confidently tell whether the passed snapshot is invalid if it below max, ii) extends IsInSnapshot API with a "released" variable that is set true when IsInSnapshot find no such snapshot below max and also find no other way to give a certain return value. In such cases the return value is true but the caller should also check the "released" boolean after the call.
In short here is the changes in the API:
i) If the snapshot is valid, no change is required.
ii) If the snapshot might be invalid, a reference to "released" boolean must be passed to IsInSnapshot.
ii-a) If snapshot is above max, IsInSnapshot can figure the return valid using the commit cache.
ii-b) otherwise if snapshot is in old_commit_map_, IsInSnapshot can use that to tell if value was visible to the snapshot.
ii-c) otherwise it sets "released" to true and returns true as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4856
Differential Revision: D13599847
Pulled By: maysamyabandeh
fbshipit-source-id: 1752be28667f886a1efec8cae5714b9b7a8f1e0f
Summary:
IsInSnapshotEmptyMapTest tests that IsInSnapshot returns correct value for existing data after a recovery, where max is not zero and yet commit cache is empty. The existing test was preliminary which is improved in this patch. It also increases the db sequence after recovery so that there the snapshot immediately taken after recovery would have a sequence number different than that of max_evicted_seq. This simplifies the logic in IsInSnapshot by not having to consider the special case that an old snapshot might be equal to max_evicted_seq and yet not present in old_commit_map.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4853
Differential Revision: D13595223
Pulled By: maysamyabandeh
fbshipit-source-id: 77c12ca8a3f61a47479a93bef2038ff502dc3322
Summary:
The rollback algorithm in WritePrepared transactions requires reading the values before the transaction start. Currently it uses the prepare_seq -1 as the snapshot sequence number for the read. This is not correct since the passed sequence number must be for a valid snapshot. The patch fixes it by passing kMaxSequenceNumber instead. This is fine since all the writes done by the aborted transaction will be skipped during the read anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4851
Differential Revision: D13592773
Pulled By: maysamyabandeh
fbshipit-source-id: ff1bf92ea9909d4cccb173bdff49febc0e9eb7a2
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
RangeDelAggregatorV2 now supports ShouldDelete calls on
snapshot stripes and creation of range tombstone compaction iterators.
RangeDelAggregator is no longer used on any non-test code path, and will
be removed in a future commit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4758
Differential Revision: D13439254
Pulled By: abhimadan
fbshipit-source-id: fe105bcf8e3d4a2df37a622d5510843cd71b0401
Summary:
It sometimes times out with it is run with TSAN. The patch reduces the iteration from 50 to 30. This reduces the normal runtime from 5.2 to 3.1 seconds and should similarly address the TSAN timeout problem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4779
Differential Revision: D13456862
Pulled By: maysamyabandeh
fbshipit-source-id: fdc0ad7d781b1c33b771d2415ff5fa2f1b5e2537
Summary:
1. DBImplReadOnly::GetLiveFiles should not return NotSupported. Instead, it
should call DBImpl::GetLiveFiles(flush_memtable=false).
2. In DBImp::Recover, we should also recover the OPTIONS file name and/or
number so that an immediate subsequent GetLiveFiles will get the correct
OPTIONS name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4681
Differential Revision: D13069205
Pulled By: riversand963
fbshipit-source-id: 3e6a0174307d06db5a01feb099b306cea1f7f88a
Summary:
the original test does not give enough time difference between tombstone write time and the expire time point, which make test flaky.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4755
Reviewed By: maysamyabandeh
Differential Revision: D13369681
Pulled By: wpc
fbshipit-source-id: 22576f354c63cd0b39d8b35c3913303707503ea9
Summary:
Transaction::GetForUpdate is extended with a do_validate parameter with default value of true. If false it skips validating the snapshot (if there is any) before doing the read. After the read it also returns the latest value (expects the ReadOptions::snapshot to be nullptr). This allows RocksDB applications to use GetForUpdate similarly to how InnoDB does. Similarly ::Merge, ::Put, ::Delete, and ::SingleDelete are extended with assume_exclusive_tracked with default value of false. It true it indicates that call is assumed to be after a ::GetForUpdate(do_validate=false).
The Java APIs are accordingly updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4680
Differential Revision: D13068508
Pulled By: maysamyabandeh
fbshipit-source-id: f0b59db28f7f6a078b60844d902057140765e67d
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
The fix in #4727 for double snapshot release was incomplete since it does not properly remove the duplicate entires in the snapshot list after finding that a snapshot is still valid. The patch does that and also improves the unit test to show the issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4734
Differential Revision: D13266260
Pulled By: maysamyabandeh
fbshipit-source-id: 351e2c40cca45a87b757774c11af74182314911e
Summary:
Currently the garbage collection of items in old_commit_map_ was done upon ::ReleaseSnapshot. The assumption behind this method was that the sequence number of snapshots are unique, which is incorrect. In the very rare cases that two consecutive snapshot have the same sequence number this could lead the release of the first snapshot affect the old_commit_map_ that is necessary to service the reads of the second snapshot. The bug would be triggered only if i) two snapshot have the same seq, ii) both of them are very old (older than the last ~4m transactions), and iii) there is commit entry overlapping with the snapshot seq number.
It is fixed by doing the cleanup of old_commit_map_ in UpdateSnapshot: the new list of snapshots are compared with the old one and the missing sequence numbers are concluded released. If two snapshots have the same seq number, after the release of one of them, the seq number still appears in the snapshot least and thus not cleaned up prematurely.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4727
Differential Revision: D13246495
Pulled By: maysamyabandeh
fbshipit-source-id: 93b87a5042afd8060889df245526d3f5d29de9fe
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
If user do not end the trace manually, the tracing will continue which can potential use up all the storage space and cause problem. In this PR, the max trace file size is added to the TraceOptions and user can set the value if they need or the default is 64GB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4610
Differential Revision: D12893400
Pulled By: zhichao-cao
fbshipit-source-id: acf4b5a6076bb691778bdfbac4864e1006758953
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
As pointed out in #4059, we miss use string as buffer for file read. Changing to use char array instead.
Closing #4059
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4662
Differential Revision: D13012998
Pulled By: yiwu-arbug
fbshipit-source-id: 41234ba17c0bccea65bd647e362a0e979152bd1e
Summary:
Use the `DBOptions` that the backup engine already holds to figure out the right `EnvOptions` to use when reading the DB files. This means that, if a user opened a DB instance with `use_direct_reads=true`, then using `BackupEngine` to back up that DB instance will use direct I/O to read files when calculating checksums and copying. Currently the WALs and manifests would still be read using buffered I/O to prevent mixing direct I/O reads with concurrent buffered I/O writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4640
Differential Revision: D13015268
Pulled By: ajkr
fbshipit-source-id: 77006ad6f3e00ce58374ca4793b785eea0db6269
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Ensure delete[] and not delete is called on buffer_, as it is reset with new char[buffer_size_].
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4647
Differential Revision: D12961327
Pulled By: ajkr
fbshipit-source-id: c1af373b98359edfdc291caebe4e0acdfb8afdd8
Summary:
valgrind tests with 1 thread run too long. To make it shorter, black list some long tests. These are already blacklisted in parallel valgrind tests, but they are not in non-parallel mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4642
Differential Revision: D12945237
Pulled By: siying
fbshipit-source-id: 04cf977d435996480fe87aa09f14b17975b74f7d
Summary:
When evicting an entry form the commit_cache, it is verified against the list of old snapshots to see if it overlaps with any. The list of old snapshots is split into two lists: an efficient concurrent cache and an slow vector protected by a lock. The patch fixes a bug that would stop the search in the cache if it finds any and yet would not include the larger snapshots in the slower list.
An extra info log entry is also removed. The condition to trigger that although very rare is still feasible and should not spam the LOG when that happens.
Fixes#4621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4639
Differential Revision: D12934989
Pulled By: maysamyabandeh
fbshipit-source-id: 4e0fe8147ba292b554ae78e94c21c2ef31e03e2d
Summary:
Long absolute file names in log make it hard to read the LOG files.
So we shorter them to relative to the root of RocksDB project path.
In most cases, they will only have one level directory and one file name.
There was [a talk](#4316) about making "util/logging.h" a public header file.
But we concern the conflicts that might be introduced in for macros
named `STRINGIFY`, `TOSTRING`, and `PREPEND_FILE_LINE`.
So I prepend a prefix `ROCKS_LOG_` to them.
I also remove the line that includes "port.h" which seems unneccessary here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4616
Differential Revision: D12892857
Pulled By: siying
fbshipit-source-id: af79aaf82153b8fd66b5966aced39a51fbca9c6c
Summary:
SetId and GetId are the experimental API that so far being used in WritePrepared and WriteUnPrepared transactions, where the id is assigned at the prepare time. The patch extends the API to WriteCommitted transactions, by setting the id at commit time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4565
Differential Revision: D10557862
Pulled By: maysamyabandeh
fbshipit-source-id: 2b27a140682b6185a4988fa88f8152628e0d67af
Summary:
This fixes three tests that fail with relatively recent tools and libraries:
The tests are:
* `spatial_db_test`
* `table_test`
* `db_universal_compaction_test`
I'm using:
* `gcc` 7.3.0
* `glibc` 2.27
* `snappy` 1.1.7
* `gflags` 2.2.1
* `zlib` 1.2.11
* `bzip2` 1.0.6.0.1
* `lz4` 1.8.2
* `jemalloc` 5.0.1
The versions used in the Travis environment (which is two Ubuntu LTS versions behind the current one and doesn't use `lz4` or `jemalloc`) don't seem to have a problem. However, to be safe, I verified that these tests pass with and without my changes in a trusty Docker container without `lz4` and `jemalloc`.
However, I do get an unrelated set of other failures when using a trusty Docker container that uses `lz4` and `jemalloc`:
```
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/0, where GetParam() = (1, false) (1189 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1, where GetParam() = (1, true) (1246 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2, where GetParam() = (3, false) (1237 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3, where GetParam() = (3, true) (1195 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4, where GetParam() = (5, false) (1161 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5, where GetParam() = (5, true) (1229 ms)
```
I haven't attempted to fix these since I'm not using trusty and Travis doesn't use `lz4` and `jemalloc`. However, the final commit in this PR does at least fix the compilation errors that occur when using trusty's version of `lz4`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4562
Differential Revision: D10510917
Pulled By: maysamyabandeh
fbshipit-source-id: 59534042015ec339270e5fc2f6ac4d859370d189
Summary:
A fix similar to #4410 but on the write path. On IO error on `SelectBlobFile()` we didn't return error code properly, but simply a nullptr of `BlobFile`. The `AppendBlob()` method didn't have null check for the pointer and caused crash. The fix make sure we properly return error code in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4580
Differential Revision: D10513849
Pulled By: yiwu-arbug
fbshipit-source-id: 80bca920d1d7a3541149de981015ad83e0aa14b5
Summary:
Couple of very minor improvements (typos in comments, full qualification of class name, reordering members of a struct to make it smaller)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4564
Differential Revision: D10510183
Pulled By: maysamyabandeh
fbshipit-source-id: c7ddf9bfbf2db08cd31896c3fd93789d3fa68c8b
Summary:
WriteBatchWithIndex's SeekForPrev() has a bug that we internally place the position just before the seek key rather than after. This makes the iterator to miss the result that is the same as the seek key. Fix it by position the iterator equal or smaller.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4559
Differential Revision: D10468534
Pulled By: siying
fbshipit-source-id: 2fb371ae809c561b60a1c11cef71e1c66fea1f19
Summary:
this avoids a few copies of std::string and other structs
in the context of range-based for loops. instead of copying
the values for each iteration, use a const reference to avoid
copying.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4459
Differential Revision: D10282045
Pulled By: sagar0
fbshipit-source-id: 5012e910dca279abd2be847e1fb432d96274edfb
Summary:
- Fix DBImpl API race condition
The timeline of execution flow is as follow:
```
timeline user_thread1 user_thread2
t1 | cfh = GetColumnFamilyHandleUnlocked(0)
t2 | id1 = cfh->GetID()
t3 | GetColumnFamilyHandleUnlocked(1)
t4 | id2 = cfh->GetID()
V
```
The original implementation return a pointer to a stateful variable, so that the return `ColumnFamilyHandle` will be changed when another thread calls `GetColumnFamilyHandleUnlocked` with different `column family id`
- Expose ColumnFamily ID to compaction event listener
- Fix the return status of `DBImpl::GetLatestSequenceForKey`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4391
Differential Revision: D10221243
Pulled By: yiwu-arbug
fbshipit-source-id: dec60ee9ff0c8261a2f2413a8506ec1063991993
Summary:
Fix IO error on read not being handle and crashing the DB. With the fix we properly return the error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4410
Differential Revision: D9979246
Pulled By: yiwu-arbug
fbshipit-source-id: 111a85675067a29c03cb60e9a34103f4ff636694
Summary:
Make the CompactOnDeletionCollectorFactory class public, and provide
methods to update the window size and deletion trigger params. These
will take effect on subsequent created SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4403
Differential Revision: D9976857
Pulled By: anand1976
fbshipit-source-id: 31dbf0511c12fa2bb9b2a7ba620079e0ee09cf48
Summary:
TransactionOptions::skip_concurrency_control allows pessimistic transactions to skip the overhead of concurrency control. This could be as an optimization if the application knows that the transaction would not have any conflict with concurrent transactions. It is currently used during recovery assuming (i) application guarantees no conflict between prepared transactions in the WAL (ii) application guarantees that recovered transactions will be rolled back/commit before new transactions start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4346
Differential Revision: D9759149
Pulled By: maysamyabandeh
fbshipit-source-id: f896e84fa58b0b584be904c7fd3883a41ea3215b
Summary:
Reverting is needed to unblock a user building against master, who is blocked for multiple days due to a thread-safety issue in `GetEmptyDict`. We haven't been able to fix it quickly, so reverting.
Simply ran `git revert 6c40806e51a89386d2b066fddf73d3fd03a36f65`. There were no merge conflicts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4347
Differential Revision: D9668365
Pulled By: ajkr
fbshipit-source-id: 0c56334f0a23cf5ee0233d4e4679eae6709739cd
Summary:
As you know, almost all compilers support "pragma once" keyword instead of using include guards. To be keep consistency between header files, all header files are edited.
Besides this, try to fix some warnings about loss of data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4339
Differential Revision: D9654990
Pulled By: ajkr
fbshipit-source-id: c2cf3d2d03a599847684bed81378c401920ca848
Summary:
`GetLiveFiles` and `GetLiveFilesMetadata` should return path relative to db path.
It is a separate issue when `path_relative` is false how can we return relative path. But `DBImpl::GetLiveFiles` don't handle it as well when there are multiple `db_paths`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4326
Differential Revision: D9545904
Pulled By: yiwu-arbug
fbshipit-source-id: 6762d879fcb561df2b612e6fdfb4a6b51db03f5d
Summary:
Basically at the moment it seems it's possible to cause write stall by calling flush (either manually vis DB::Flush(), or from Backup Engine directly calling FlushMemTable() while background flush may be already happening.
One of the ways to fix it is that in DBImpl::CompactRange() we already check for possible stall and delay flush if needed before we actually proceed to call FlushMemTable(). We can simply move this delay logic to separate method and call it from FlushMemTable.
This is draft patch, for first look; need to check tests/update SyncPoints and most certainly would need to add allow_write_stall method to FlushOptions().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4297
Differential Revision: D9420705
Pulled By: mikhail-antonov
fbshipit-source-id: f81d206b55e1d7b39e4dc64242fdfbceeea03fcc
Summary: For the CURRENT file forged during checkpoint, we were forgetting to `fsync` or `fdatasync` it after its creation. This PR fixes it.
Differential Revision: D9525939
Pulled By: ajkr
fbshipit-source-id: a505483644026ee3f501cfc0dcbe74832165b2e3
Summary:
When reading an expired key using `Get(..., std::string* value)` API, BlobDB first read the index entry and decode expiration from it. In this case, although BlobDB reset the PinnableSlice, the index entry is stored in user provided string `value`. The value will be returned as a garbage value, despite status being NotFound. Fixing it by use a different PinnableSlice to read the index entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4321
Differential Revision: D9519042
Pulled By: yiwu-arbug
fbshipit-source-id: f054c951a1fa98265228be94f931904ed7056677
Summary:
`DB::DiableFileDeletions` and `DB::EnableFileDeletions` are used for applications to stop RocksDB background jobs to delete files while they are doing replication. Implement these methods for BlobDB. `DeleteObsolteFiles` now needs to check `disable_file_deletions_` before starting, and will hold `delete_file_mutex_` the whole time while it is running. `DisableFileDeletions` needs to wait on `delete_file_mutex_` for running `DeleteObsolteFiles` job and set `disable_file_deletions_` flag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4314
Differential Revision: D9501373
Pulled By: yiwu-arbug
fbshipit-source-id: 81064c1228f1724eff46da22b50ff765b16292cd
Summary:
In RocksDB, for a given SST file, all data blocks are compressed with the same dictionary. When we compress a block using the dictionary's raw bytes, the compression library first has to digest the dictionary to get it into a usable form. This digestion work is redundant and ideally should be done once per file.
ZSTD offers APIs for the caller to create and reuse a digested dictionary object (`ZSTD_CDict`). In this PR, we call `ZSTD_createCDict` once per file to digest the raw bytes. Then we use `ZSTD_compress_usingCDict` to compress each data block using the pre-digested dictionary. Once the file's created `ZSTD_freeCDict` releases the resources held by the digested dictionary.
There are a couple other changes included in this PR:
- Changed the parameter object for (un)compression functions from `CompressionContext`/`UncompressionContext` to `CompressionInfo`/`UncompressionInfo`. This avoids the previous pattern, where `CompressionContext`/`UncompressionContext` had to be mutated before calling a (un)compression function depending on whether dictionary should be used. I felt that mutation was error-prone so eliminated it.
- Added support for digested uncompression dictionaries (`ZSTD_DDict`) as well. However, this PR does not support reusing them across uncompression calls for the same file. That work is deferred to a later PR when we will store the `ZSTD_DDict` objects in block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4251
Differential Revision: D9257078
Pulled By: ajkr
fbshipit-source-id: 21b8cb6bbdd48e459f1c62343780ab66c0a64438
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
Fix expired file not being evicted from the DB. We have a background task (previously called `CheckSeqFiles` and I rename it to `EvictExpiredFiles`) to scan and remove expired files, but it only close the files, not marking them as expired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4294
Differential Revision: D9415984
Pulled By: yiwu-arbug
fbshipit-source-id: eff7bf0331c52a7ccdb02318602bff7f64f3ef3d
Summary:
Transaction has had methods to deal with SavePoints already, but
was missing the PopSavePoint method provided by WriteBatch and
WriteBatchWithIndex.
This PR adds PopSavePoint to Transaction as well. Having the method
on Transaction-level too is useful for applications that repeatedly
execute a sequence of operations that normally succeed, but infrequently
need to get rolled back. Using SavePoints here is sensible, but as
operations normally succeed the application may pile up a lot of
useless SavePoints inside a Transaction, leading to slightly increased
memory usage for managing the unneeded SavePoints.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4256
Differential Revision: D9326932
Pulled By: yiwu-arbug
fbshipit-source-id: 53a0af18a6c7e87feff8a56f1f3eab9df7f371d6
Summary:
Right now, `ldb idump` may have memory out of control if there is a big range of tombstones. Add an option to cut maxinum number of keys in GetAllKeyVersions(), and push down --max_num_ikeys from ldb.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4271
Differential Revision: D9369149
Pulled By: siying
fbshipit-source-id: 7cbb797b7d2fa16573495a7e84937456d3ff25bf
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
Add API to allow fetching expiration of a key with `Get()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4227
Differential Revision: D9169897
Pulled By: yiwu-arbug
fbshipit-source-id: 2a6f216c493dc75731ddcef1daa689b517fab31b
Summary:
There are two issues with `VisibleToActiveSnapshot`:
1. If there are no snapshots, `oldest_snapshot` will be 0 and `VisibleToActiveSnapshot` will always return true. Since the method is used to decide whether it is safe to delete obsolete files, obsolete file won't be able to delete in this case.
2. The `auto` keyword of `auto snapshots = db_impl_->snapshots()` translate to a copy of `const SnapshotList` instead of a reference. Since copy constructor of `SnapshotList` is not defined, using the copy may yield unexpected result.
Issue 2 actually hide issue 1 from being catch by tests. During test `snapshots.empty()` can return false while it should actually be empty, and `snapshots.oldest()` return an invalid address, making `oldest_snapshot` being some random large number.
The issue was originally reported by BlobDB early adopter at Kuaishou.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4236
Differential Revision: D9188706
Pulled By: yiwu-arbug
fbshipit-source-id: a0f2624b927cf9bf28c1bb534784fee5d106f5ea
Summary:
Cleanup TTLExtractor interface. The original purpose of it is to allow our users keep using existing `Write()` interface but allow it to accept TTL via `TTLExtractor`. However the interface is confusing. Will replace it with something like `WriteWithTTL(batch, ttl)` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4229
Differential Revision: D9174390
Pulled By: yiwu-arbug
fbshipit-source-id: 68201703d784408b851336ab4dd9b84188245b2d
Summary:
HashMayMatch is related to AddKey() instead of CreateFilter().
Also applies some minor Fixes#4191#4200#3910
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4202
Differential Revision: D9180945
Pulled By: maysamyabandeh
fbshipit-source-id: 6f07b81c5bb9bda5c0273475b486ba8a030471e6
Summary:
A framework for tracing and replaying RocksDB operations.
A binary trace file is created by capturing the DB operations, and it can be replayed back at the same rate using db_bench.
- Column-families are supported
- Multi-threaded tracing is supported.
- TraceReader and TraceWriter are exposed to the user, so that tracing to various destinations can be enabled (say, to other messaging/logging services). By default, a FileTraceReader and FileTraceWriter are implemented to capture to a file and replay from it.
- This is not yet ideal to be enabled in production due to large performance overhead, but it can be safely tried out in a shadow setup, say, for analyzing RocksDB operations.
Currently supported DB operations:
- Writes:
-- Put
-- Merge
-- Delete
-- SingleDelete
-- DeleteRange
-- Write
- Reads:
-- Get (point lookups)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3837
Differential Revision: D7974837
Pulled By: sagar0
fbshipit-source-id: 8ec65aaf336504bc1f6ed0feae67f6ed5ef97a72
Summary:
This adds support for writing unprepared batches based on size defined in `TransactionOptions::max_write_batch_size`. This is done by overriding methods that modify data (Put/Delete/SingleDelete/Merge) and checking first if write batch size has exceeded threshold. If so, the write batch is written to DB as an unprepared batch.
Support for Commit/Rollback for unprepared batch is added as well. This has been done by simply extending the WritePrepared Commit/Rollback logic to take care of all unprep_seq numbers either when updating prepare heap, or adding to commit map. For updating the commit map, this logic exists inside `WriteUnpreparedCommitEntryPreReleaseCallback`.
A test change was also made to have transactions unregister themselves when committing without prepare. This is because with write unprepared, there may be unprepared entries (which act similarly to prepared entries) already when a commit is done without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4104
Differential Revision: D8785717
Pulled By: lth
fbshipit-source-id: c02006e281ec1ce00f628e2a7beec0ee73096a91
Summary:
Fixes#3391.
This change adds a `DeleteRange` method to `SstFileWriter` and adds
support for ingesting SSTs with range deletion tombstones. This is
important for applications that need to atomically ingest SSTs while
clearing out any existing keys in a given key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3778
Differential Revision: D8821836
Pulled By: anand1976
fbshipit-source-id: ca7786c1947ff129afa703dab011d524c7883844
Summary:
The patch makes sure that two parallel test threads will operate on different db paths. This enables using open source tools such as gtest-parallel to run the tests of a file in parallel.
Example: ``` ~/gtest-parallel/gtest-parallel ./table_test```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4135
Differential Revision: D8846653
Pulled By: maysamyabandeh
fbshipit-source-id: 799bad1abb260e3d346bcb680d2ae207a852ba84
Summary:
Picked up a task to convert this to use the gtest framework. It can't be this simple, can it?
It works, but should all the std::cout be removed?
```
[$] ~/git/rocksdb [gft !]: ./merge_test
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from MergeTest
[ RUN ] MergeTest.MergeDbTest
Test read-modify-write counters...
a: 3
1
2
a: 3
b: 1225
3
Compaction started ...
Compaction ended
a: 3
b: 1225
Test merge-based counters...
a: 3
1
2
a: 3
b: 1225
3
Test merge in memtable...
a: 3
1
2
a: 3
b: 1225
3
Test Partial-Merge
Test merge-operator not set after reopen
[ OK ] MergeTest.MergeDbTest (93 ms)
[ RUN ] MergeTest.MergeDbTtlTest
Opening database with TTL
Test read-modify-write counters...
a: 3
1
2
a: 3
b: 1225
3
Compaction started ...
Compaction ended
a: 3
b: 1225
Test merge-based counters...
a: 3
1
2
a: 3
b: 1225
3
Test merge in memtable...
Opening database with TTL
a: 3
1
2
a: 3
b: 1225
3
Test Partial-Merge
Opening database with TTL
Opening database with TTL
Opening database with TTL
Opening database with TTL
Test merge-operator not set after reopen
[ OK ] MergeTest.MergeDbTtlTest (97 ms)
[----------] 2 tests from MergeTest (190 ms total)
[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (190 ms total)
[ PASSED ] 2 tests.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4114
Differential Revision: D8822886
Pulled By: gfosco
fbshipit-source-id: c299d008e883c3bb911d2b357a2e9e4423f8e91a
Summary:
The transactions are currently tested with and without using StackableDB. This is mostly to check that the code path is consistent with stackable db as well. Slow, stress tests however do not benefit from being run again with StackableDB. The patch excludes StackableDB from such tests.
On a single core it reduced the runtime of transaction_test from 199s to 135s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4132
Differential Revision: D8841655
Pulled By: maysamyabandeh
fbshipit-source-id: 7b9aaba2673b542b195439dfb306cef26bd63b19
Summary:
This test routinely exceeds the FB contbuild test timeout of 10 minutes,
due to the large number of iterations. The large number (mainly due to
100 randomly selected window sizes) does not seem to add any value.
Reduce it to allow the test to finish in < 10 mins.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4117
Differential Revision: D8815646
Pulled By: anand1976
fbshipit-source-id: 260690d24f444767ad93b039dec3ae8b9cdd1843
Summary:
Prior to this PR, there was a race condition between `DBImpl::SetOptions` and `BackupEngine::CreateNewBackup`, as illustrated below.
```
Time thread 1 thread 2
| CreateNewBackup -> GetLiveFiles
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile // unlink oldest OPTIONS file
| copy the oldest OPTIONS // IO error!
V
```
Proposed fix is to check the value of `DBImpl::disable_obsolete_files_deletion_` before calling `DeleteObsoleteOptionsFiles`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4108
Differential Revision: D8796360
Pulled By: riversand963
fbshipit-source-id: 02045317f793ea4c7d4400a5bf333b8502fa3e82
Summary:
This adds support for recovering WriteUnprepared transactions through the following changes:
- The information in `RecoveredTransaction` is extended so that it can reference multiple batches.
- `MarkBeginPrepare` is extended with a bool indicating whether it is an unprepared begin, and this is passed down to `InsertRecoveredTransaction` to indicate whether the current transaction is prepared or not.
- `WriteUnpreparedTxnDB::Initialize` is overridden so that it will rollback unprepared transactions from the recovered transactions. This can be done without updating the prepare heap/commit map, because this is before the DB has finished initializing, and after writing the rollback batch, those data structures should not contain information about the rolled back transaction anyway.
Commit/Rollback of live transactions is still unimplemented and will come later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4078
Differential Revision: D8703382
Pulled By: lth
fbshipit-source-id: 7e0aada6c23bd39299f1f20d6c060492e0e6b60a
Summary:
This adds a new WAL marker of type kTypeBeginUnprepareXID.
Also, DBImpl now contains a field called batch_per_txn (meaning one WriteBatch per transaction, or possibly multiple WriteBatches). This would also indicate that this DB is using WriteUnprepared policy.
Recovery code would be able to make use of this extra field on DBImpl in a separate diff. For now, it is just used to determine whether the WAL is compatible or not.
Closes https://github.com/facebook/rocksdb/pull/4069
Differential Revision: D8675099
Pulled By: lth
fbshipit-source-id: ca27cae1738e46d65f2bb92860fc759deb874749
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
- Summary
Add timestamp into the DeadlockInfo to store the timestamp when deadlock detected on the rocksdb side.
- Testplan:
`make check -j64`
Closes https://github.com/facebook/rocksdb/pull/4060
Differential Revision: D8655380
Pulled By: chouxi
fbshipit-source-id: f58e1aa5e09eb1d1eed0a181d4e2304aaf01efe8
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Summary:
Previously with is_fifo=true we only evict TTL file. Changing it to also evict non-TTL files from oldest to newest, after exhausted TTL files.
Closes https://github.com/facebook/rocksdb/pull/4049
Differential Revision: D8604597
Pulled By: yiwu-arbug
fbshipit-source-id: bc4209ee27c1528ce4b72833e6f1e1bff80082c1
Summary:
Enable readahead for blob DB garbage collection, which should improve GC performance a little bit.
Closes https://github.com/facebook/rocksdb/pull/3648
Differential Revision: D7383791
Pulled By: yiwu-arbug
fbshipit-source-id: 642b3327f7105eca85986d3fb2d8f960a3d83cf1
Summary:
- Attempt to clean the checkpoint staging directory before starting a checkpoint. It was already cleaned up at the end of checkpoint. But it wasn't cleaned up in the edge case where the process crashed while staging checkpoint files.
- Attempt to clean the checkpoint directory before calling `Checkpoint::Create` in `db_stress`. This handles the case where checkpoint directory was created by a previous `db_stress` run but the process crashed before cleaning it up.
- Use `DestroyDB` for cleaning checkpoint directory since a checkpoint is a DB.
Closes https://github.com/facebook/rocksdb/pull/4035
Reviewed By: yiwu-arbug
Differential Revision: D8580223
Pulled By: ajkr
fbshipit-source-id: 28c667400e249fad0fdedc664b349031b7b61599
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
As titled.
I have not extended the Compatibility tests because the new WAL markers are still unimplemented.
Closes https://github.com/facebook/rocksdb/pull/3941
Differential Revision: D8238394
Pulled By: lth
fbshipit-source-id: 980e3d44837bbf2cfa64047f9738f559dfac4b1d
Summary:
In order to make valgrind check test to pass in a day, remove some tests that run prohibitively slow under valgrind.
Closes https://github.com/facebook/rocksdb/pull/3924
Differential Revision: D8210184
Pulled By: siying
fbshipit-source-id: 5b06fb08f3cf57571d422d05a0dbddc9f9376f7a
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
The patch clarifies the ownership of the root db after TransactionDB::Open. If it is a success the ownership if with the TransactionDB, and the root db will be deleted when the destructor of the base class, StackableDB, is called. If it is failure, the temporarily created root db will also be deleted properly.
The patch also includes lots of useful formatting changes.
Closes https://github.com/facebook/rocksdb/pull/3714 upon which this patch is built.
Closes https://github.com/facebook/rocksdb/pull/3806
Differential Revision: D7878010
Pulled By: maysamyabandeh
fbshipit-source-id: f54f3942e29434143ae5a2423ceec9c7072cd4c2
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Rollback was disabled in stress test since there was a concurrency issue in WritePrepared rollback algorithm. The issue is fixed by caching the column family handles in WritePrepared to skip getting them from the db when needed for rollback.
Tested by running transaction stress test under tsan.
Closes https://github.com/facebook/rocksdb/pull/3785
Differential Revision: D7793727
Pulled By: maysamyabandeh
fbshipit-source-id: d81ab6fda0e53186ca69944cfe0712ce4869451e
Summary:
The tsan flavor of SeqAdvanceConcurrentTest times out in our test infra. The patch splits it into 10 tests.
On my vm before:
[ OK ] WritePreparedTransactionTest/WritePreparedTransactionTest.SeqAdvanceConcurrentTest/0 (5194 ms)
after:
[ OK ] OneWriteQueue/SeqAdvanceConcurrentTest.SeqAdvanceConcurrentTest/0 (1906 ms)
Closes https://github.com/facebook/rocksdb/pull/3799
Differential Revision: D7854515
Pulled By: maysamyabandeh
fbshipit-source-id: 4fbac42a1f974326cbc237f8cb9d6232d379c431
Summary:
We used to name private directories like "1.tmp" while BackupEngine populated them, and then rename without the ".tmp" suffix (i.e., rename "1.tmp" to "1") after all files were copied. On glusterfs, directory renames like this require operations across many hosts, and partial failures have caused operational problems.
Fortunately we don't need to rename private directories. We already have a meta-file that uses the tempfile-rename pattern to commit a backup atomically after all its files have been successfully copied. So we can copy private files directly to their final location, so now there's no directory rename.
Closes https://github.com/facebook/rocksdb/pull/3749
Differential Revision: D7705610
Pulled By: ajkr
fbshipit-source-id: fd724a28dd2bf993ce323a5f2cb7e7d6980cc346
Summary:
Currently WritePrepared rolls back a transaction with prepare sequence number prepare_seq by i) write a single rollback batch with rollback_seq, ii) add <rollback_seq, rollback_seq> to commit cache, iii) remove prepare_seq from PrepareHeap.
This is correct assuming that there is no snapshot taken when a transaction is rolled back. This is the case the way MySQL does rollback which is after recovery. Otherwise if max_evicted_seq advances the prepare_seq, the live snapshot might assume data as committed since it does not find them in CommitCache.
The change is to simply add <prepare_seq. rollback_seq> to commit cache before removing prepare_seq from PrepareHeap. In this way if max_evicted_seq advances prpeare_seq, the existing mechanism that we have to check evicted entries against live snapshots will make sure that the live snapshot will not see the data of rolled back transaction.
Closes https://github.com/facebook/rocksdb/pull/3745
Differential Revision: D7696193
Pulled By: maysamyabandeh
fbshipit-source-id: c9a2d46341ddc03554dded1303520a1cab74ef9c
Summary:
The WriteBatch::Iterate will try with a larger sequence number if the memtable reports a duplicate. This status is specified with TryAgain status. So far the assumption was that the last entry in the batch will never return TryAgain, which is correct when WAL is created via WritePrepared since it always appends a batch separator if a natural one does not exist. However when reading a WAL generated by WriteCommitted this batch separator might not exist. Although WritePrepared is not supposed to be able to read the WAL generated by WriteCommitted we should avoid confusing scenarios in which the behavior becomes unpredictable. The path fixes that by allowing TryAgain even for the last entry of the write batch.
Closes https://github.com/facebook/rocksdb/pull/3747
Differential Revision: D7708391
Pulled By: maysamyabandeh
fbshipit-source-id: bfaddaa9b14a4cdaff6977f6f63c789a6ab1ee0d
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
This is a hack as temporary fix of MyRocks with rollbacking the merge operands. The way MyRocks uses merge operands is without protection of locks, which violates the assumption behind the rollback algorithm. They are ok with not being rolled back as it would just create a gap in the autoincrement column. The hack add an option to disable the rollback of merge operands by default and only enables it to let the unit test pass.
Closes https://github.com/facebook/rocksdb/pull/3711
Differential Revision: D7597177
Pulled By: maysamyabandeh
fbshipit-source-id: 544be0f666c7e7abb7f651ec8b23124e05056728
Summary:
We introduced smallest_prep optimization in this commit b225de7e10, which enables storing the smallest uncommitted sequence number along with the snapshot. This enables the readers that read from the snapshot to skip further checks and safely assumed the data is committed if its sequence number is less than smallest uncommitted when the snapshot was taken. The problem was that smallest uncommitted and the snapshot must be taken atomically, and the lack of atomicity had led to readers using a smallest uncommitted after the snapshot was taken and hence mistakenly skipping some data.
This patch fixes the problem by i) separating the process of removing of prepare entries from the AddCommitted function, ii) removing the prepare entires AFTER the committed sequence number is published, iii) getting smallest uncommitted (from the prepare list) BEFORE taking a snapshot. This guarantees that the smallest uncommitted that is accompanied with a snapshot is less than or equal of such number if it was obtained atomically.
Tested by running MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest that was failing sporadically.
Closes https://github.com/facebook/rocksdb/pull/3703
Differential Revision: D7581934
Pulled By: maysamyabandeh
fbshipit-source-id: dc9d6f4fb477eba75d4d5927326905b548a96a32
Summary:
Adding some stats that would be helpful to monitor if the DB has gone to unlikely stats that would hurt the performance. These are mostly when we end up needing to acquire a mutex.
Closes https://github.com/facebook/rocksdb/pull/3683
Differential Revision: D7529393
Pulled By: maysamyabandeh
fbshipit-source-id: f7d36279a8f39bd84d8ddbf64b5c97f670c5d6d9
Summary:
When `max_valid_backups_to_open` is set, the `BackupEngine` doesn't know about the files referenced by existing backups. This PR prevents us from deleting valid files when that option is set, in cases where we are unable to accurately determine refcount. There are warnings logged when we may miss deleting unreferenced files, and a recommendation in the header for users to periodically unset this option and run a full `GarbageCollect`.
Closes https://github.com/facebook/rocksdb/pull/3518
Differential Revision: D7008331
Pulled By: ajkr
fbshipit-source-id: 87907f964dc9716e229d08636a895d2fc7b72305
Summary:
Make blob_dump tool able to show uncompressed values if the blob file is compressed. Also show total compressed vs. raw size at the end if --show_summary is provided.
Closes https://github.com/facebook/rocksdb/pull/3633
Differential Revision: D7348926
Pulled By: yiwu-arbug
fbshipit-source-id: ca709cb4ed5cf6a550ff2987df8033df81516f8e
Summary:
This change models Optimistic Tx db after Pessimistic TX db. The motivation for this change is to make the ptr polymorphic so it can be held by the same raw or smart ptr.
Currently, due to the inheritance of the Opt Tx db not being rooted in the manner of Pess Tx from a single DB root it is more difficult to write clean code and have clear ownership of the database in cases when options dictate instantiate of plan DB, Pess Tx DB or Opt tx db.
Closes https://github.com/facebook/rocksdb/pull/3566
Differential Revision: D7184502
Pulled By: yiwu-arbug
fbshipit-source-id: 31d06efafd79497bb0c230e971857dba3bd962c3
Summary:
The is an optimization to reduce lookup in the CommitCache when querying IsInSnapshot. The optimization takes the smallest uncommitted data at the time that the snapshot was taken and if the sequence number of the read data is lower than that number it assumes the data as committed.
To implement this optimization two changes are required: i) The AddPrepared function must be called sequentially to avoid out of order insertion in the PrepareHeap (otherwise the top of the heap does not indicate the smallest prepare in future too), ii) non-2PC transactions also call AddPrepared if they do not commit in one step.
Closes https://github.com/facebook/rocksdb/pull/3649
Differential Revision: D7388630
Pulled By: maysamyabandeh
fbshipit-source-id: b79506238c17467d590763582960d4d90181c600
Summary:
Currently if the CommitTimeWriteBatch is set to be used only as a state that is required only for recovery , the user cannot see that in DB until it is restarted. This while the state is already inserted into the DB after the memtable flush. It would be useful for debugging if make this state visible to the user after the flush by committing it. The patch does it by a invoking a callback that does the commit on the recoverable state.
Closes https://github.com/facebook/rocksdb/pull/3661
Differential Revision: D7424577
Pulled By: maysamyabandeh
fbshipit-source-id: 137f9408662f0853938b33fa440f27f04c1bbf5c
Summary:
Current commit cache size is 2^21. This was due to a type. With 2^23 commit entries we can have transactions as long as 64s without incurring the cost of having them evicted from the commit cache before their commit. Here is the math:
2^23 / 2 (one out of two seq numbers are for commit) / 2^16 TPS = 2^6 = 64s
Closes https://github.com/facebook/rocksdb/pull/3657
Differential Revision: D7411211
Pulled By: maysamyabandeh
fbshipit-source-id: e7cacf40579f3acf940643d8a1cfe5dd201caa35
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
This commit fixes a race condition on calling SetLastPublishedSequence. The function must be called only from the 2nd write queue when two_write_queues is enabled. However there was a bug that would also call it from the main write queue if CommitTimeWriteBatch is provided to the commit request and yet use_only_the_last_commit_time_batch_for_recovery optimization is not enabled. To fix that we penalize the commit request in such cases by doing an additional write solely to publish the seq number from the 2nd queue.
Closes https://github.com/facebook/rocksdb/pull/3641
Differential Revision: D7361508
Pulled By: maysamyabandeh
fbshipit-source-id: bf8f7a27e5cccf5425dccbce25eb0032e8e5a4d7
Summary:
The 10MB buffer in BackupEngineImpl::BackupMeta::StoreToFile can be corrupted with a large number of files. Added a check to determine current buffer length and append data to file if buffer becomes full.
Resolves https://github.com/facebook/rocksdb/issues/3228
Closes https://github.com/facebook/rocksdb/pull/3636
Differential Revision: D7354160
Pulled By: ajkr
fbshipit-source-id: eec12d38095a0d17551a4aaee52b99d30a555722
Summary:
* Fix BlobDBImpl::GCFileAndUpdateLSM doesn't close the new file, and the new file will not be able to be garbage collected later.
* Fix BlobDBImpl::GCFileAndUpdateLSM doesn't copy over metadata from old file to new file.
Closes https://github.com/facebook/rocksdb/pull/3639
Differential Revision: D7355092
Pulled By: yiwu-arbug
fbshipit-source-id: 4fa3594ac5ce376bed1af04a545c532cfc0088c4
Summary:
`Writer::WriteBuffer` was always called at the beginning of checkpoint/backup. But that log writer has no internal synchronization, which meant the same buffer could be flushed twice in a race condition case, causing a WAL entry to be duplicated. Then subsequent WAL entries would be at unexpected offsets, causing the 32KB block boundaries to be overlapped and manifesting as a corruption.
This PR fixes the behavior to only use `WriteBuffer` (via `FlushWAL`) in checkpoint/backup when manual WAL flush is enabled. In that case, users are responsible for providing synchronization between WAL flushes. We can also consider removing the call entirely.
Closes https://github.com/facebook/rocksdb/pull/3603
Differential Revision: D7277447
Pulled By: ajkr
fbshipit-source-id: 1b15bd7fd930511222b075418c10de0aaa70a35a
Summary:
This diff handles cases where compaction causes an ENOSPC error.
This does not handle corner cases where another background job is started while compaction is running, and the other background job triggers ENOSPC, although we do allow the user to provision for these background jobs with SstFileManager::SetCompactionBufferSize.
It also does not handle the case where compaction has finished and some other background job independently triggers ENOSPC.
Usage: Functionality is inside SstFileManager. In particular, users should set SstFileManager::SetMaxAllowedSpaceUsage, which is the reference highwatermark for determining whether to cancel compactions.
Closes https://github.com/facebook/rocksdb/pull/3449
Differential Revision: D7016941
Pulled By: amytai
fbshipit-source-id: 8965ab8dd8b00972e771637a41b4e6c645450445
Summary:
This patch addressed several issues.
Portability including db_test std::thread -> port::Thread Cc: @
and %z to ROCKSDB portable macro. Cc: maysamyabandeh
Implement Env::AreFilesSame
Make the implementation of file unique number more robust
Get rid of C-runtime and go directly to Windows API when dealing
with file primitives.
Implement GetSectorSize() and aling unbuffered read on the value if
available.
Adjust Windows Logger for the new interface, implement CloseImpl() Cc: anand1976
Fix test running script issue where $status var was of incorrect scope
so the failures were swallowed and not reported.
DestroyDB() creates a logger and opens a LOG file in the directory
being cleaned up. This holds a lock on the folder and the cleanup is
prevented. This fails one of the checkpoin tests. We observe the same in production.
We close the log file in this change.
Fix DBTest2.ReadAmpBitmapLiveInCacheAfterDBClose failure where the test
attempts to open a directory with NewRandomAccessFile which does not
work on Windows.
Fix DBTest.SoftLimit as it is dependent on thread timing. CC: yiwu-arbug
Closes https://github.com/facebook/rocksdb/pull/3552
Differential Revision: D7156304
Pulled By: siying
fbshipit-source-id: 43db0a757f1dfceffeb2b7988043156639173f5b
Summary:
Improving blob db FIFO eviction with the following changes,
* Change blob_dir_size to max_db_size. Take into account SST file size when computing DB size.
* FIFO now only take into account live sst files and live blob files. It is normal for disk usage to go over max_db_size because there are obsolete sst files and blob files pending deletion.
* FIFO eviction now also evict TTL blob files that's still open. It doesn't evict non-TTL blob files.
* If FIFO is triggered, it will pass an expiration and the current sequence number to compaction filter. Compaction filter will then filter inlined keys to evict those with an earlier expiration and smaller sequence number. So call LSM FIFO.
* Compaction filter also filter those blob indexes where corresponding blob file is gone.
* Add an event listener to listen compaction/flush event and update sst file size.
* Implement DB::Close() to make sure base db, as well as event listener and compaction filter, destruct before blob db.
* More blob db statistics around FIFO.
* Fix some locking issue when accessing a blob file.
Closes https://github.com/facebook/rocksdb/pull/3556
Differential Revision: D7139328
Pulled By: yiwu-arbug
fbshipit-source-id: ea5edb07b33dfceacb2682f4789bea61de28bbfa
Summary:
Move DuplicateDetector and SetComparator to its own header file in util. It would also address a complaint in the unity test.
Closes https://github.com/facebook/rocksdb/pull/3567
Differential Revision: D7163268
Pulled By: maysamyabandeh
fbshipit-source-id: 6ddf82773473646dbbc1284ae601a78c4907c778
Summary:
Fix the following bugs:
- During recovery a duplicate key was inserted twice into the write batch of the recovery transaction,
once when the memtable returns false (because it was duplicates) and once for the 2nd attempt. This would result into different SubBatch count measured when the recovered transactions is committing.
- If a cf is flushed during recovery the memtable is not available to assist in detecting the duplicate key. This could result into not advancing the sequence number when iterating over duplicate keys of a flushed cf and hence inserting the next key with the wrong sequence number.
- SubBacthCounter would reset the comparator to default comparator after the first duplicate key. The 2nd duplicate key hence would have gone through a wrong comparator and not being detected.
Closes https://github.com/facebook/rocksdb/pull/3562
Differential Revision: D7149440
Pulled By: maysamyabandeh
fbshipit-source-id: 91ec317b165f363f5d11ff8b8c47c81cebb8ed77
Summary:
Red diff to remove existing implementation of garbage collection. The current approach is reference counting kind of approach and require a lot of effort to get the size counter right on compaction and deletion. I'm going to go with a simple mark-sweep kind of approach and will send another PR for that.
CompactionEventListener was added solely for blob db and it adds complexity and overhead to compaction iterator. Removing it as well.
Closes https://github.com/facebook/rocksdb/pull/3551
Differential Revision: D7130190
Pulled By: yiwu-arbug
fbshipit-source-id: c3a375ad2639a3f6ed179df6eda602372cc5b8df
Summary:
The zeroed entries were not removed from prepared_section_completed_ map. This patch adds a unit test to show the problem and fixes that by refactoring the code. The new code is more efficient since i) it uses two separate mutex to avoid contention between commit and prepare threads, ii) it uses a sorted vector for maintaining uniq log entires with prepare which avoids a very large heap with many duplicate entries.
Closes https://github.com/facebook/rocksdb/pull/3545
Differential Revision: D7106071
Pulled By: maysamyabandeh
fbshipit-source-id: b3ae17cb6cd37ef10b6b35e0086c15c758768a48
Summary:
Make use of the index in WriteBatchWithIndex to also count the number of sub-batches. This eliminates the need to separately scan the batch to count the number of sub-batches once a duplicate key is detected.
Closes https://github.com/facebook/rocksdb/pull/3529
Differential Revision: D7049947
Pulled By: maysamyabandeh
fbshipit-source-id: 81cbf12c4e662541c772c7265a8f91631e25c7cd
Summary:
Use the rsync tempfile naming convention in our `BackupEngine`. The temp file follows the format, `.<filename>.<suffix>`, which is later renamed to `<filename>`. We fix `tmp` as the `<suffix>` as we don't need to use random bytes for now. The benefit is gluster treats this tempfile naming convention specially and applies hashing only to `<filename>`, so the file won't need to be linked or moved when it's renamed. Our gluster team suggested this will make things operationally easier.
Closes https://github.com/facebook/rocksdb/pull/3463
Differential Revision: D6893333
Pulled By: ajkr
fbshipit-source-id: fd7622978f4b2487fce33cde40dd3124f16bcaa8
Summary:
Under a certain sequence of accessing PreparedHeap, there was a bug that would not successfully empty the heap. This would result in performance issues when the heap content is moved to old_prepared_ after max_evicted_seq_ advances the orphan prepared sequence numbers. The patch fixed the bug and add more unit tests. It also does more logging when the unlikely scenarios are faced
Closes https://github.com/facebook/rocksdb/pull/3526
Differential Revision: D7038486
Pulled By: maysamyabandeh
fbshipit-source-id: f1e40bea558f67b03d2a29131fcb8734c65fce97
Summary:
In case it is found that a key is already marked as locked in a
stripe's map of locked keys, it is not necessary to look it up
again using `std::unordered_map<std::string, ...>::at(size_t)`.
Instead, we can use the already found position using the iterator
produced by the previous `find` operation. Reusing the iterator
will avoid having to hash the key again and do additional "random"
memory lookups in the map of keys (though the data will very
likely sit available in caches here already due to the previous
find operation)
Closes https://github.com/facebook/rocksdb/pull/3505
Differential Revision: D7036446
Pulled By: sagar0
fbshipit-source-id: cced51547b2bd2d49394f6bc8c5896f09fa80f68
Summary:
- made `CreateCheckpoint` properly return `InvalidArgument` when called with an empty directory. Previously it triggered an assertion failure due to a bug in the logic.
- made `ldb` set empty `checkpoint_dir` if that's what the user specifies, so that we can use it to properly test `CreateCheckpoint` in the future.
Differential Revision: D6874562
fbshipit-source-id: dcc1bd41768261d9338987fa7711444289707ed7
Summary:
Add a static cast to perform the left shift as with an unsigned type.
make ubsan_check
Closes https://github.com/facebook/rocksdb/pull/3517
Reviewed By: sagar0
Differential Revision: D7016044
Pulled By: igorsugak
fbshipit-source-id: baf72f6197edd8f7220d010b15a23d6de6a72c49
Summary:
These are optimization that we applied to improve sysbech's update_noindex performance.
1. Make use of LIKELY compiler hint
2. Move std::atomic so the subclass
3. Make use of skip_prepared in non-2pc transactions.
Closes https://github.com/facebook/rocksdb/pull/3512
Differential Revision: D7000075
Pulled By: maysamyabandeh
fbshipit-source-id: 1ab8292584df1f6305a4992973fb1b7933632181
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
Somehow the indentation was incorrect in this file.
The only change in this PR is to get it right again in order to make the code more readable.
Please reject if you think it's not worth it.
Closes https://github.com/facebook/rocksdb/pull/3504
Differential Revision: D6996011
Pulled By: miasantreble
fbshipit-source-id: 060514a3a8c910d34bad795b36eb4d278512b154
Summary:
TransactionDB::Write can receive some optimization hints from the user. One is to skip the concurrency control mechanism. WritePreparedTxnDB is currently ignoring such hints. This patch optimizes WritePreparedTxnDB::Write for skip_concurrency_control and skip_duplicate_key_check hints.
Closes https://github.com/facebook/rocksdb/pull/3496
Differential Revision: D6971784
Pulled By: maysamyabandeh
fbshipit-source-id: cbab10ad538fa2b8bcb47e37c77724afe6e30f03
Summary:
WritePreparedTransactionTest has the UBSAN error because the wrong order of its parent class construction. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3478
Differential Revision: D6928975
Pulled By: siying
fbshipit-source-id: 13edfd5cb9cf73f1ac5ae3b6f53061d32783733d
Summary:
Compared to DB::Write, TransactionDB::Write has the additional overhead of creating and initializing an internal transaction object, as well as the overhead of locking/unlocking the keys. This patch extends the TransactionDB::Write with an skip_cc option to allow the users to indicate that the write batch do not conflict with others and the concurrency control and its overhead can be skipped. TransactionDB::Write by default calls DB::Write when skip_cc is set, which works for WriteCommitted WritePolicy. Any other flavor of TransactionDB that is not compatible with this default behavior (such as WritePreparedTxnDB) can extend ::Write and implement their own approach for taking into account the skip_cc optimization.
Closes https://github.com/facebook/rocksdb/pull/3457
Differential Revision: D6877318
Pulled By: maysamyabandeh
fbshipit-source-id: 56f4e21db87ff71492db4e376fb7c2b03dfeab6b
Summary:
Deletes the transaction object at the end of the test.
Verified by:
- COMPILE_WITH_ASAN=1 make -j32 transaction_test
- ./transaction_test --gtest_filter="DBA**Duplicate*"
Closes https://github.com/facebook/rocksdb/pull/3470
Differential Revision: D6916473
Pulled By: maysamyabandeh
fbshipit-source-id: 8303df25408635d5d3ac2b25f309a3d15957c937
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455
Differential Revision: D6873699
Pulled By: maysamyabandeh
fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
Summary:
Without this patch, ubsan_check is currently failing with this error:
```
utilities/transactions/write_prepared_transaction_test.cc:369:63: runtime error: member call on address 0x0000051649f8 which does not point to an object of type 'WithParamInterface'
0x0000051649f8: note: object has invalid vptr
```
Tested by `COMPILE_WITH_UBSAN=1 make -j32 transaction_test` and running `./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccessTest1/0`
Closes https://github.com/facebook/rocksdb/pull/3444
Differential Revision: D6850087
Pulled By: maysamyabandeh
fbshipit-source-id: 5b254da8504b8757f7aec8a820ad464154da1a1d
Summary:
previously if `checkpoint_dir` contained a trailing slash, we'd attempt to create the `.tmp` directory under `checkpoint_dir` due to simply concatenating `checkpoint_dir + ".tmp"`. This failed because `checkpoint_dir` hadn't been created yet and our directory creation is non-recursive. This PR fixes the issue by always creating the `.tmp` directory in the same parent as `checkpoint_dir` by stripping trailing slashes before concatenating.
Closes https://github.com/facebook/rocksdb/pull/3275
Differential Revision: D6574952
Pulled By: ajkr
fbshipit-source-id: a6daa6777a901eac2460cd0140c9515f7241aefc
Summary:
SnapshotConcurrentAccessTest sometimes times out when running on the test infra. This patch splits the test into smaller sub-tests to avoid the timeout. It also benefits from lower run-time of each sub-test and increases the coverage of the test. The overall run-time of each final sub-test is at most half of the original test so we should no longer see a timeout.
Closes https://github.com/facebook/rocksdb/pull/3435
Differential Revision: D6839427
Pulled By: maysamyabandeh
fbshipit-source-id: d53fdb157109e2438ca7fe447d0cf4b71f304bd8
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
When blob_files is empty, std::min_element will return blobfiles.end(), which cannot be dereference. Fixing it.
Closes https://github.com/facebook/rocksdb/pull/3387
Differential Revision: D6764927
Pulled By: yiwu-arbug
fbshipit-source-id: 86f78700132be95760d35ac63480dfd3a8bbe17a
Summary:
We have seen cases where it could be good to change TTL on already open DB.
Change ttl in TtlCompactionFilterFactory on open db.
Next time a filter is created, it will filter accroding to the set TTL.
Is this something that could be useful for others?
Any downsides?
Closes https://github.com/facebook/rocksdb/pull/3292
Differential Revision: D6731993
Pulled By: miasantreble
fbshipit-source-id: 73b94d69237b11e8730734389052429d621a6b1e
Summary:
- Change directory name from "db_test" to "checkpoint_test". Previously it used the same directory as `db_test`
- Systematically cleanup snapshot and snapshot staging directories before each test. Previously a failed test run caused subsequent runs to fail, particularly when the first failure caused "snapshot.tmp" to not be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/3351
Differential Revision: D6691015
Pulled By: ajkr
fbshipit-source-id: 4fc2ac2e21ff2617ea0e96297c5132b5f2eefd79
Summary:
This patch addresses a couple of minor TODOs for WritePrepared Txn such as double checking some assert statements at runtime as well, skip extra AddPrepared in non-2pc transactions, and safety check for infinite loops.
Closes https://github.com/facebook/rocksdb/pull/3302
Differential Revision: D6617002
Pulled By: maysamyabandeh
fbshipit-source-id: ef6673c139cb49f64c0879508d2f573b78609aca
Summary:
Previously on a blob db read, we are making a read of the blob value, and then make another read to get CRC checksum. I'm combining the two read into one.
readrandom db_bench with 1G database with base db size of 13M, value size 1k:
`./db_bench --db=/home/yiwu/tmp/db_bench --use_blob_db --value_size=1024 --num=1000000 --benchmarks=readrandom --use_existing_db --cache_size=32000000`
master: throughput 234MB/s, get micros p50 5.984 p95 9.998 p99 20.817 p100 787
this PR: throughput 261MB/s, get micros p50 5.157 p95 9.928 p99 20.724 p100 190
Closes https://github.com/facebook/rocksdb/pull/3301
Differential Revision: D6615950
Pulled By: yiwu-arbug
fbshipit-source-id: 052410c6d8539ec0cc305d53793bbc8f3616baa3
Summary:
DestroyDB that is used in tests loops over the files returned by ::GetChildren and delete them one by one. Such files might be already deleted in the file system (during DeleteObsoleteFileImpl for example) but will get actually deleted with a delay sometimes before ::DeleteFile is called on the file name. We have some test failures where FaultInjectionTestEnv::DeleteFile fails on assert(s.ok()) during DestroyDB. This patch removes the assert statement to fix that.
Closes https://github.com/facebook/rocksdb/pull/3324
Differential Revision: D6659545
Pulled By: maysamyabandeh
fbshipit-source-id: 4c9552fbcd494dcf3e61d475c11fc965c4388b2c
Summary:
We dump blob db options on blob db open, but it was removed by mistake in #3246. Adding it back.
Closes https://github.com/facebook/rocksdb/pull/3298
Differential Revision: D6607177
Pulled By: yiwu-arbug
fbshipit-source-id: 2a4aacbfa52fd8f1878dc9e1fbb95fe48faf80c0
Summary:
Previously, if blob_db_options.bytes_per_sync, there is a background job to call fsync() for every bytes_per_sync bytes written to a blob file. With the change we simply pass bytes_per_sync as env_options_ to blob files so that sync_file_range() will be used instead.
Closes https://github.com/facebook/rocksdb/pull/3297
Differential Revision: D6606994
Pulled By: yiwu-arbug
fbshipit-source-id: 452424be52e32ba92f5ea603b564e9b88929af47
Summary:
A proper implementation of Iterator::Refresh() for WritePreparedTxnDB would require release and acquire another snapshot. Since MyRocks don't make use of Iterator::Refresh(), we just simply mark it as not supported.
Closes https://github.com/facebook/rocksdb/pull/3290
Differential Revision: D6599931
Pulled By: yiwu-arbug
fbshipit-source-id: 4e1632d967316431424f6e458254ecf9a97567cf
Summary:
* Include `unistd.h` for `sleep(3)`
* Include `sys/time.h` for `gettimeofday(3)`
* Include `utils/random.h` for `Random64`
Error messages:
utilities/persistent_cache/hash_table_bench.cc: In constructor ‘rocksdb::HashTableBenchmark::HashTableBenchmark(rocksdb::HashTableImpl<long unsigned int, std::__cxx11::basic_string<char> >*, size_t, size_t, size_t, size_t)’:
utilities/persistent_cache/hash_table_bench.cc:76:28: error: ‘sleep’ was not declared in this scope
/* sleep override */ sleep(1);
^~~~~
utilities/persistent_cache/hash_table_bench.cc:76:28: note: suggested alternative: ‘strsep’
/* sleep override */ sleep(1);
^~~~~
strsep
utilities/persistent_cache/hash_table_bench.cc: In member function ‘void rocksdb::HashTableBenchmark::RunRead()’:
utilities/persistent_cache/hash_table_bench.cc:107:5: error: ‘Random64’ was not declared in this scope
Random64 rgen(time(nullptr));
^~~~~~~~
utilities/persistent_cache/hash_table_bench.cc:107:5: note: suggested alternative: ‘random_r’
Random64 rgen(time(nullptr));
^~~~~~~~
random_r
utilities/persistent_cache/hash_table_bench.cc:110:18: error: ‘rgen’ was not declared in this scope
size_t k = rgen.Next() % max_prepop_key;
^~~~
utilities/persistent_cache/hash_table_bench.cc: In static member function ‘static uint64_t rocksdb::HashTableBenchmark::NowInMillSec()’:
utilities/persistent_cache/hash_table_bench.cc:153:5: error: ‘gettimeofday’ was not declared in this scope
gettimeofday(&tv, /*tz=*/nullptr);
^~~~~~~~~~~~
make[2]: *** [CMakeFiles/hash_table_bench.dir/build.make:63: CMakeFiles/hash_table_bench.dir/utilities/persistent_cache/hash_table_bench.cc.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:3346: CMakeFiles/hash_table_bench.dir/all] Error 2
make[1]: *** Waiting for unfinished jobs....
Closes https://github.com/facebook/rocksdb/pull/3283
Differential Revision: D6594850
Pulled By: ajkr
fbshipit-source-id: fd83957338c210cdfd253763347aafd39476824f
Summary:
Currently non-2pc writes do the 2nd dummy write to actually commit the transaction. This was necessary to ensure that publishing the commit sequence number will be done only from one queue (the queue that does not write to memtable). This is however not necessary when we have only one write queue, which is actually the setup that would be used by non-2pc writes. This patch eliminates the 2nd write when two_write_queues are disabled by updating the commit map in the 1st write.
Closes https://github.com/facebook/rocksdb/pull/3277
Differential Revision: D6575392
Pulled By: maysamyabandeh
fbshipit-source-id: 8ab458f7ca506905962f9166026b2ec81e749c46
Summary:
Previously we store sequence number range of each blob files, and use the sequence number range to check if the file can be possibly visible by a snapshot. But it adds complexity to the code, since the sequence number is only available after a write. (The current implementation get sequence number by calling GetLatestSequenceNumber(), which is wrong.) With the patch, we are not storing sequence number range, and check if snapshot_sequence < obsolete_sequence to decide if the file is visible by a snapshot (previously we check if first_sequence <= snapshot_sequence < obsolete_sequence).
Closes https://github.com/facebook/rocksdb/pull/3274
Differential Revision: D6571497
Pulled By: yiwu-arbug
fbshipit-source-id: ca06479dc1fcd8782f6525b62b7762cd47d61909
Summary:
- check most times after calling snprintf that the buffer didn't fill up. Previously we'd proceed and use `buf_size - len` as the length in subsequent calls, which underflowed as those are unsigned size_t.
- replace some memcpys with snprintf for consistency
Closes https://github.com/facebook/rocksdb/pull/3255
Differential Revision: D6541464
Pulled By: ajkr
fbshipit-source-id: 8610ea6a24f38e0a37c6d17bc65b7c712da6d932
Summary:
There were a few places where MSVC's implicit truncation warnings were getting triggered, which was causing the MSVC build to fail due to warnings being treated as errors. This resolves the issues by making the truncations in some places explicit, and by making it so there are no truncations of literals.
Fixes#3239
Supersedes #3259
Closes https://github.com/facebook/rocksdb/pull/3273
Reviewed By: yiwu-arbug
Differential Revision: D6569204
Pulled By: Orvid
fbshipit-source-id: c188cf1cf98d9acb6d94b71875041cc81f8ff088
Summary:
Refactor BlobDB open logic. List of changes:
Major:
* On reopen, mark blob files found as immutable, do not use them for writing new keys.
* Not to scan the whole file to find file footer. Instead just seek to the end of the file and try to read footer.
Minor:
* Move most of the real logic from blob_db.cc to blob_db_impl.cc.
* Not to hold shared_ptr of event listeners in global maps in blob_db.cc
* Some changes to BlobFile interface.
* Improve logging and error handling.
Closes https://github.com/facebook/rocksdb/pull/3246
Differential Revision: D6526147
Pulled By: yiwu-arbug
fbshipit-source-id: 9dc4cdd63359a2f9b696af817086949da8d06952
