Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.
To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.
In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.
Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929
Test Plan:
make check
make crash_test
make crash_test_with_txn
Reviewed By: anand1976
Differential Revision: D36069678
Pulled By: riversand963
fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
Summary:
Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions.
1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw.
2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true.
3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn
```
Reviewed By: pdillinger
Differential Revision: D35806678
Pulled By: riversand963
fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616
Summary:
This patch completes the second part of the task: "Add blob support to the dump and dump_live_files command"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9896
Reviewed By: ltamasi
Differential Revision: D35852667
Pulled By: jowlyzhang
fbshipit-source-id: a006456c881f468a92da689e895134762e9574e1
Summary:
This patch is the first part of adding blob dump support. It only adds blob dump support to the dump command. A follow up patch will add blob dump support to the dump_live_files command.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9881
Reviewed By: ltamasi
Differential Revision: D35796731
Pulled By: jowlyzhang
fbshipit-source-id: 2cc5973b222d505a331ac7b969edcf992b47c5ee
Summary:
This patch completes the first part of the task: "Extend all three commands so they can decode and print blob references if a new option --decode_blob_index is specified"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9870
Reviewed By: ltamasi
Differential Revision: D35753932
Pulled By: jowlyzhang
fbshipit-source-id: 9d2bbba0eef2ed86b982767eba9de1b4881f35c9
Summary:
`InitializeOptionsGeneral()` was overwriting many options that were already configured by OPTIONS file, potentially with the flag default values. This PR changes that function to only overwrite options in limited scenarios, as described at the top of its definition. Block cache is still a violation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9862
Test Plan: ran under various scenarios (multi-DB, single DB, OPTIONS file, flags) and verified options are set as expected
Reviewed By: jay-zhuang
Differential Revision: D35736960
Pulled By: ajkr
fbshipit-source-id: 75b77740af37e6f5741618f8a8f5685df2417d03
Summary:
Since they operate at distinct abstraction layers, I thought it
was prudent to combine with EncryptedEnv CI test for each PR, for efficiency
in testing. Also added supported compressions to sst_dump --help output
so that CI job can verify no compiled-in compression support.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9850
Test Plan: CI, some manual stuff
Reviewed By: riversand963
Differential Revision: D35682346
Pulled By: pdillinger
fbshipit-source-id: be9879c1533fed304ee32c89fd9ba4b07c2b90cc
Summary:
This change only add decode blob index support to dump_live_files command, which is part of a task to add blob support to a few commands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9842
Reviewed By: ltamasi
Differential Revision: D35650167
Pulled By: jowlyzhang
fbshipit-source-id: a78151b98bc38ac6f52c6e01ca6927a3429ddd14
Summary:
Various renaming and fixes to get rid of remaining uses of
"backupable" which is terminology leftover from the original, flawed
design of BackupableDB. Now any DB can be backed up, using BackupEngine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D35334386
Pulled By: pdillinger
fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329
Summary:
There's an existing benchmark, "getmergeoperands", but it is unconventional in that it has multiple phases and hardcoded setup parameters.
This PR adds a different one, "readrandomoperands", that follows the pattern of other benchmarks of having a single phase and taking its configuration from existing flags.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9785
Test Plan:
```
$ ./db_bench -benchmarks=mergerandom -merge_operator=StringAppendOperator -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -compression_type=none -disable_auto_compactions=true
$ ./db_bench -use_existing_db=true -benchmarks=readrandomoperands -merge_operator=StringAppendOperator -disable_auto_compactions=true -duration=10
...
readrandomoperands : 542.082 micros/op 1844 ops/sec; 0.2 MB/s (11980 of 18999 found)
```
Reviewed By: jay-zhuang
Differential Revision: D35290412
Pulled By: ajkr
fbshipit-source-id: fb367ca614b128cef844a75f0e5d9dd7c3328d85
Summary:
Fixes a bug introduced by me in https://github.com/facebook/rocksdb/pull/9733
That PR added a counter so that the per-thread seeds in ThreadState would
be unique even when --benchmarks had more than one test. But it incorrectly
used this counter as the value for ThreadState::tid as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9757
Test Plan:
Confirm that unexpectedly good QPS results on the regression tests return
to normal with this fix. I have confirmed that the QPS increase starts with
the PR 9733 diff.
Reviewed By: jay-zhuang
Differential Revision: D35149303
Pulled By: mdcallag
fbshipit-source-id: dee5cc36b7faaba6c3be6d6a253d3c2eaad72864
Summary:
This is for https://github.com/facebook/rocksdb/issues/9737
I have wasted more than a few hours running db_bench benchmarks where --seed was not set
and getting better than expected results because cache hit rates are great because
multiple invocations of db_bench used the same value for --seed or did not set it,
and then all used 0. The result is that all see the same sequence of keys.
Others have done the same. The problem is worse in that it is easy to miss and the result is a benchmark with results that are misleading.
A good way to avoid this is to set it to the equivalent of gettimeofday() when either
--seed is not set or it is set to 0 (the default).
With this change the actual seed is printed when it was 0 at process start:
Set seed to 1647992570365606 because --seed was 0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9740
Test Plan:
Perf results:
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000
readrandom : 6.469 micros/op 154583 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=0
readrandom : 6.565 micros/op 152321 ops/sec; 16.9 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=1
readrandom : 6.461 micros/op 154777 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=2
readrandom : 6.525 micros/op 153244 ops/sec; 17.0 MB/s (4000000 of 4000000 found)
Reviewed By: jay-zhuang
Differential Revision: D35145361
Pulled By: mdcallag
fbshipit-source-id: 2b35b153ccec46b27d7c9405997523555fc51267
Summary:
This adds the --slow_usecs option with a default value of 1M. Operations that
take this much time have a message printed when --histogram=1, --stats_interval=0
and --stats_interval_seconds=0. The current code hardwired this to 20,000 usecs
and for some stress tests that reduced throughput by 20% or more.
This is for https://github.com/facebook/rocksdb/issues/9620
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9732
Test Plan:
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100 --histogram=1
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100000 --histogram=1
Reviewed By: jay-zhuang
Differential Revision: D35121522
Pulled By: mdcallag
fbshipit-source-id: daf27f937efd748980545d6395db332712fc078b
Summary:
db_bench quietly parses and ignores bad values for --compaction_fadvice and --value_size_distribution_type
I prefer that it fail for them as it does for bad option values in most other cases. Otherwise a benchmark
result will be provided for the wrong configuration and the result will be misleading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9741
Test Plan:
These now fail:
./db_bench --compaction_fadvice=noney
Unknown compaction fadvice:noney
./db_bench --value_size_distribution_type=norma
Cannot parse distribution type 'norma'
While correct values continue to work:
./db_bench --value_size_distribution_type=normal
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
./db_bench --compaction_fadvice=none
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
Reviewed By: siying
Differential Revision: D35115973
Pulled By: mdcallag
fbshipit-source-id: c2b10de5c2d1ea7c7539e676f5bd556351f5d370
Summary:
When --benchmarks has more than one test then the threads in one benchmark
will use the same set of seeds as the threads in the previous benchmark.
This diff fixe that.
This fixes https://github.com/facebook/rocksdb/issues/9632
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9733
Test Plan:
For this command line the block cache is 8GB, so it caches at most 1024 8KB blocks. Note that without
this diff the second run of readrandom has a much better response time because seed reuse means the
second run reads the same 1000 blocks as the first run and they are cached at that point. But with
this diff that does not happen.
./db_bench --benchmarks=fillseq,flush,compact0,waitforcompaction,levelstats,readrandom,readrandom --compression_type=zlib --num=10000000 --reads=1000 --block_size=8192
...
```
Level Files Size(MB)
--------------------
0 0 0
1 11 238
2 9 253
3 0 0
4 0 0
5 0 0
6 0 0
```
--- perf results without this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 46.212 micros/op 21618 ops/sec; 2.4 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 21.963 micros/op 45450 ops/sec; 5.0 MB/s (1000 of 1000 found)
--- perf results with this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 47.213 micros/op 21126 ops/sec; 2.3 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 42.880 micros/op 23299 ops/sec; 2.6 MB/s (1000 of 1000 found)
Reviewed By: jay-zhuang
Differential Revision: D35089763
Pulled By: mdcallag
fbshipit-source-id: 1b50143a07afe876b8c8e5fa50dd94a8ce57fc6b
Summary:
This changes db_bench to fail at startup for invalid compression types. It had been
changing them to Snappy. For other invalid options it fails at startup.
This is for https://github.com/facebook/rocksdb/issues/9621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9729
Test Plan:
This continues to work:
./db_bench --benchmarks=fillrandom --compression_type=lz4
This now fails rather than changing the compression type to Snappy
./db_bench --benchmarks=fillrandom --compression_type=lz44
Cannot parse compression type 'lz44'
Reviewed By: jay-zhuang
Differential Revision: D35081323
Pulled By: mdcallag
fbshipit-source-id: 9b38c835abddce11aa7feb235df63f53cf829981
Summary:
…in order
This fixes https://github.com/facebook/rocksdb/issues/9650
For db_bench --benchmarks=fillseq --num_multi_db=X it loads databases in sequence
rather than randomly choosing a database per Put. The benefits are:
1) avoids long delays between flushing memtables
2) avoids flushing memtables for all of them at the same point in time
3) puts same number of keys per database so that query tests will find keys as expected
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9713
Test Plan:
Using db_bench.1 without the change and db_bench.2 with the change:
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq --num_multi_db=4 --num=10000000; du -hs /data/m/rx ; done
--- without the change
fillseq : 3.188 micros/op 313682 ops/sec; 34.7 MB/s
real 2m7.787s
user 1m52.776s
sys 0m46.549s
2.7G /data/m/rx
--- with the change
fillseq : 3.149 micros/op 317563 ops/sec; 35.1 MB/s
real 2m6.196s
user 1m51.482s
sys 0m46.003s
2.7G /data/m/rx
Also, temporarily added a printf to confirm that the code switches to the next database at the right time
ZZ switch to db 1 at 10000000
ZZ switch to db 2 at 20000000
ZZ switch to db 3 at 30000000
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq,readrandom --num_multi_db=4 --num=100000; du -hs /data/m/rx ; done
--- without the change, smaller database, note that not all keys are found by readrandom because databases have < and > --num keys
fillseq : 3.176 micros/op 314805 ops/sec; 34.8 MB/s
readrandom : 1.913 micros/op 522616 ops/sec; 57.7 MB/s (99873 of 100000 found)
--- with the change, smaller database, note that all keys are found by readrandom
fillseq : 3.110 micros/op 321566 ops/sec; 35.6 MB/s
readrandom : 1.714 micros/op 583257 ops/sec; 64.5 MB/s (100000 of 100000 found)
Reviewed By: jay-zhuang
Differential Revision: D35030168
Pulled By: mdcallag
fbshipit-source-id: 2a18c4ec571d954cf5a57b00a11802a3608823ee
Summary:
Changes:
* improves monitoring by displaying average size of a Put value and average scan length
* forces the minimum value size to be 10. Before this it was 0 if you didn't set the distribution parameters.
* uses reasonable defaults for the distribution parameters that determine value size and scan length
* includes seeks in "reads ... found" message, before this they were missing
This is for https://github.com/facebook/rocksdb/issues/9672
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9711
Test Plan:
Before this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 4.289 micros/op 233138 ops/sec; 25.8 MB/s
mixgraph : 18.461 micros/op 54166 ops/sec; 755.0 MB/s ( Gets:50164 Puts:24919 Seek:24917 of 50164 in 75081 found)
After this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 3.974 micros/op 251553 ops/sec; 27.8 MB/s
mixgraph : 16.722 micros/op 59795 ops/sec; 833.5 MB/s ( Gets:50164 Puts:24919 Seek:24917, reads 75081 in 75081 found, avg size: 36.0 value, 504.9 scan)
Reviewed By: jay-zhuang
Differential Revision: D35030190
Pulled By: mdcallag
fbshipit-source-id: d8f555f28d869f752ddb674a524108884511b151
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
BlockBasedTableOptions.hash_index_allow_collision is already deprecated and has no effect. Delete it for preparing 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9454
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D33805827
fbshipit-source-id: ed8a436d1d083173ec6aef2a762ba02e1eefdc9d
Summary:
**Summary:**
RocksDB uses a block cache to reduce IO and make queries more efficient. The block cache is based on the LRU algorithm (LRUCache) and keeps objects containing uncompressed data, such as Block, ParsedFullFilterBlock etc. It allows the user to configure a second level cache (rocksdb::SecondaryCache) to extend the primary block cache by holding items evicted from it. Some of the major RocksDB users, like MyRocks, use direct IO and would like to use a primary block cache for uncompressed data and a secondary cache for compressed data. The latter allows us to mitigate the loss of the Linux page cache due to direct IO.
This PR includes a concrete implementation of rocksdb::SecondaryCache that integrates with compression libraries such as LZ4 and implements an LRU cache to hold compressed blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9518
Test Plan:
In this PR, the lru_secondary_cache_test.cc includes the following tests:
1. The unit tests for the secondary cache with either compression or no compression, such as basic tests, fails tests.
2. The integration tests with both primary cache and this secondary cache .
**Follow Up:**
1. Statistics (e.g. compression ratio) will be added in another PR.
2. Once this implementation is ready, I will do some shadow testing and benchmarking with UDB to measure the impact.
Reviewed By: anand1976
Differential Revision: D34430930
Pulled By: gitbw95
fbshipit-source-id: 218d78b672a2f914856d8a90ff32f2f5b5043ded
Summary:
When WAL compression is enabled, add a record (new record type) to store the compression type to indicate that all subsequent records are compressed. The log reader will store the compression type when this record is encountered and use the type to uncompress the subsequent records. Compress and uncompress to be implemented in subsequent diffs.
Enabled WAL compression in some WAL tests to check for regressions. Some tests that rely on offsets have been disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9556
Reviewed By: anand1976
Differential Revision: D34308216
Pulled By: sidroyc
fbshipit-source-id: 7f10595e46f3277f1ea2d309fbf95e2e935a8705
Summary:
Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working.
`RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`.
There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads).
The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424
Test Plan:
- new unit tests
- new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart.
- setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true`
- benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true`
- crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10`
Reviewed By: hx235
Differential Revision: D33747386
Pulled By: ajkr
fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
Summary:
Opening DB as seconeary instance has been supported in ldb but it is not mentioned in --help. Mention it there. The part of the help message after the modification:
```
commands MUST specify --db=<full_path_to_db_directory> when necessary
commands can optionally specify
--env_uri=<uri_of_environment> or --fs_uri=<uri_of_filesystem> if necessary
--secondary_path=<secondary_path> to open DB as secondary instance. Operations not supported in secondary instance will fail.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9582
Test Plan: Build and run ldb --help
Reviewed By: riversand963
Differential Revision: D34286427
fbshipit-source-id: e56c5290d0548098ab6acc6dde2167f5a64f34f3
Summary:
I did another pass through running CI jobs. It is uncommon now to see
`db_stress` stuck in the setup phase but still happen.
One reason was repeatedly reading/verifying checksum on filter blocks when
`-cache_index_and_filter_blocks=1` and `-cache_size=1048576`. To address
that I increased the cache size.
Another reason was having a WAL with many range tombstones and every
`db_stress` run using `-avoid_flush_during_recovery=1` (in that
scenario, the setup phase spent too much CPU in
`rocksdb::MemTable::NewRangeTombstoneIteratorInternal()`). To address
that I fixed the `-avoid_flush_during_recovery` setting so it is
reevaluated for every `db_stress` run.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9483
Reviewed By: riversand963
Differential Revision: D33922929
Pulled By: ajkr
fbshipit-source-id: 0a298ec7c4df6f6b44620233996047a2dc7ee5f3
Summary:
This change removes the ability to configure the deprecated,
inefficient block-based filter in the public API. Options that would
have enabled it now use "full" (and optionally partitioned) filters.
Existing block-based filters can still be read and used, and a "back
door" way to build them still exists, for testing and in case of trouble.
About the only way this removal would cause an issue for users is if
temporary memory for filter construction greatly increases. In
HISTORY.md we suggest a few possible mitigations: partitioned filters,
smaller SST files, or setting reserve_table_builder_memory=true.
Or users who have customized a FilterPolicy using the
CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade
their code. (It's long past time for people to move to the new
builder/reader customization interface.)
This change also introduces some internal-use-only configuration strings
for testing specific filter implementations while bypassing some
compatibility / intelligence logic. This is intended to hint at a path
toward making FilterPolicy Customizable, but it also gives us a "back
door" way to configure block-based filter.
Aside: updated db_bench so that -readonly implies -use_existing_db
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535
Test Plan:
Unit tests updated. Specifically,
* BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back
door configuration interface and ignoring of `use_block_based_builder`.
* BlockBasedTableTest.TracingGetTest is migrated from testing
block-based filter access pattern to full filter access patter, by
re-ordering some things.
* Options test (pretty self-explanatory)
Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30`
Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB
With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB
No consistent difference with fillrandom
Reviewed By: jay-zhuang
Differential Revision: D34153871
Pulled By: pdillinger
fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
After https://github.com/facebook/rocksdb/issues/9481, we are using newer default compiler for
build-format-compatible CircleCI nightly job, which fails on building
2.2.fb.branch branch because it tries to use a pre-compiled libsnappy.a
that is checked into the repo (!). This works around that by setting
SNAPPY_LDFLAGS=-lsnappy, which is only understood by such old versions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9517
Test Plan:
Run check_format_compatible.sh on Ubuntu 20 AWS machine,
watch nightly run
Reviewed By: hx235
Differential Revision: D34055561
Pulled By: pdillinger
fbshipit-source-id: 45f9d428dd082f026773bfa8d9dd4dad66fc9378
