Summary:
Revert this change. Not generating the OnTableFileCreated() notification for a 0 byte SST on flush breaks the assumption that every OnTableFileCreationStarted() notification is followed by a corresponding OnTableFileCreated().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4263
Differential Revision: D9285623
Pulled By: anand1976
fbshipit-source-id: 808c3dcd498b4b4f4ed4be947a29a24b2296aa8d
Summary:
Do not consider the range tombstone sentinel key as causing 2 adjacent
sstables in a level to overlap. When a range tombstone's end key is the
largest key in an sstable, the sstable's end key is so to a "sentinel"
value that is the smallest key in the next sstable with a sequence
number of kMaxSequenceNumber. This "sentinel" is guaranteed to not
overlap in internal-key space with the next sstable. Unfortunately,
GetOverlappingFiles uses user-keys to determine overlap and was thus
considering 2 adjacent sstables in a level to overlap if they were
separated by this sentinel key. This in turn would cause compactions to
be larger than necessary.
Note that this conflicts with
https://github.com/facebook/rocksdb/pull/2769 and cases
`DBRangeDelTest.CompactionTreatsSplitInputLevelDeletionAtomically` to
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4050
Differential Revision: D8844423
Pulled By: ajkr
fbshipit-source-id: df3f9f1db8f4cff2bff77376b98b83c2ae1d155b
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
For example calling CompactionFilter is always timed and gives the user no way to disable.
This PR will disable the timer if `Statistics::stats_level_` (which is part of DBOptions) is `kExceptDetailedTimers`
Closes https://github.com/facebook/rocksdb/pull/4029
Differential Revision: D8583670
Pulled By: miasantreble
fbshipit-source-id: 913be9fe433ae0c06e88193b59d41920a532307f
Summary:
Don't call the OnTableFileCreated listener callback when a 0 size SST
file gets created by Flush. Doing so causes an assertion failure in db_stress. It is also not correct behavior as we call env->DeleteFile() for such files right before the notification.
Closes https://github.com/facebook/rocksdb/pull/4003
Differential Revision: D8461385
Pulled By: anand1976
fbshipit-source-id: ae92d4f921c2e2cff981ad58f4929ed8b609f35d
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
CompactionIterator invoke MergeHelper::MergeUntil() to do partial merge between snapshot boundaries. Previously it only depend on sequence number to tell snapshot boundary, but we also need to make use of snapshot_checker to verify visibility of the merge operands to the snapshots. For example, say there is a snapshot with seq = 2 but only can see data with seq <= 1. There are three merges, each with seq = 1, 2, 3. A correct compaction output would be (1),(2+3). Without taking snapshot_checker into account when generating merge result, compaction will generate output (1+2),(3).
By filtering uncommitted keys with read callback, the read path already take care of merges well and don't need additional updates.
Closes https://github.com/facebook/rocksdb/pull/3475
Differential Revision: D6926087
Pulled By: yiwu-arbug
fbshipit-source-id: 8f539d6f897cfe29b6dc27a8992f68c2a629d40a
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Introducing FIFO compactions with TTL.
FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.
To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
- On Flush: Set to the time of flush.
- On Compaction: Set to the max creation_time of all the files involved in the compaction.
- On Repair and Recovery: Set to the time of repair/recovery.
- Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
- the creation_time of all files involved in compaction is 0.
- the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.
This feature is not supported if max_open_files != -1 or with table formats other than Block-based.
**Test Plan:**
Added tests.
**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100
readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found)
```
With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20
readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```
SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480
Differential Revision: D5305116
Pulled By: sagar0
fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
Summary:
With a regression bug was introduced two years ago, by 6e9fbeb27c , we fail to check return status of fsync call. This can cause we miss the information from the file system and can potentially cause corrupted data which we could have been detected.
Closes https://github.com/facebook/rocksdb/pull/2495
Reviewed By: ajkr
Differential Revision: D5321949
Pulled By: siying
fbshipit-source-id: c68117914bb40700198fc37d0e4c63163a8a1031
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548
Differential Revision: D4208169
Pulled By: ajkr
fbshipit-source-id: 2fd65cf
Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547
Differential Revision: D4207781
Pulled By: ajkr
fbshipit-source-id: 9d1c130
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.
So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513
Differential Revision: D4181423
Pulled By: ajkr
fbshipit-source-id: 835b8f5
Summary:
Adjusted AddToBuilder() to take lower_bound and upper_bound, which serve two purposes: (1) only range deletions overlapping with the interval [lower_bound, upper_bound) will be added to the output file, and (2) the output file's boundaries will not be extended before lower_bound or after upper_bound. Our computation of lower_bound/upper_bound consider both subcompaction boundaries and previous/next files within the subcompaction.
Test cases are here (level subcompactions: https://gist.github.com/ajkr/63c7eae3e9667c5ebdc0a7efb74ac332, and universal subcompactions: https://gist.github.com/ajkr/5a62af77c4ebe4052a1955c496d51fdb) but can't be included in this diff as they depend on committing the API first. They fail before this change and pass after.
Closes https://github.com/facebook/rocksdb/pull/1501
Reviewed By: yhchiang
Differential Revision: D4171685
Pulled By: ajkr
fbshipit-source-id: ee99db8
Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438
Differential Revision: D4100025
Pulled By: ajkr
fbshipit-source-id: cb01a70
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary:
Add kill points in:
1. after creating a file
2. before writing a manifest record
3. before syncing manifest
4. before creating a new current file
5. after creating a new current file
Test Plan: Run all current tests.
Reviewers: yhchiang, igor, anthony, IslamAbdelRahman, rven, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48855
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
Summary: Fixed a bug which causes rocksdb.flush.write.bytes stat is always zero
Test Plan: augment existing db_test
Reviewers: sdong, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47595
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
Builder and CompactionJob share a lot of fairly complex code. This patch
refactors this code into a separate class, the CompactionIterator. Because the
shared code is fairly complex, this patch hopefully improves maintainability.
While there are is a lot of potential for further improvements, the patch is
intentionally pretty close to the original structure because the change is
already complex enough.
Test Plan: make clean all check && ./db_stress
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46197
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).
Test Plan: make clean check all
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45993
Summary:
Currently, we only purge duplicate keys and deletions during flush if `earliest_seqno_in_memtable <= newest_snapshot`. This means that the newest snapshot happened before we first created the memtable. This is almost never true for MyRocks and MongoRocks.
This patch makes purging during flush able to understand snapshots. The main logic is copied from compaction_job.cc, although the logic over there is much more complicated and extensive. However, we should try to merge the common functionality at some point.
I need this patch to implement no_overwrite_i_promise functionality for flush. We'll also need this to support SingleDelete() during Flush(). @yoshinorim requested the feature.
Test Plan:
make check
I had to adjust some unit tests to understand this new behavior
Reviewers: yhchiang, yoshinorim, anthony, sdong, noetzli
Reviewed By: noetzli
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42087
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
Allow GetThreadList to report Flush properties, which includes:
* job id
* number of bytes that has been written since flush started.
* total size of input mem-tables
Test Plan:
./db_bench --threads=30 --num=1000000 --benchmarks=fillrandom --thread_status_per_interval=100 --value_size=1000
Sample output from db_bench which tracks same flush job
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 5789 us FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 577104 | JobID 8 |
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 30.634 ms FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 1734865 | JobID 8 |
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38505
Summary: To further distinguish the corruption cases were caused by storage media or in memory states when writing it, add a paranoid check after writing the file to iterate all the rows.
Test Plan: Add a new unit test for it
Reviewers: rven, igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37335
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
Summary:
Summary:
Added a new option to ColumnFamllyOptions - optimize_filters_for_hits. This option can be used in the case where most
accesses to the store are key hits and we dont need to optimize performance for key misses.
This is useful when you have a very large database and most of your lookups succeed. The option allows the store to
not store and use filters in the last level (the largest level which contains data). These filters can take a large amount of
space for large databases (in memory and on-disk). For the last level, these filters are only useful for key misses and not
for key hits. If we are not optimizing for key misses, we can choose to not store these filters for that level.
This option is only provided for BlockBasedTable. We skip the filters when we are compacting
Test Plan:
1. Modified db_test toalso run tests with an additonal option (skip_filters_on_last_level)
2. Added another unit test to db_test which specifically tests that filters are being skipped
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: lgalanis, yoshinorim, MarkCallaghan, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33717
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
Previously, builder.cc has a check for merge operator which prevents
RocksDB from crash when reopening a DB w/o properly specifying the merge
operator. However, currently we observed a memory leak on failing in
RocksDB recovery. This diff removes such check and let it crash instead of
causing memory leak for now before we have identified the real cause of
the memory leak.
Test Plan: make all check
Reviewers: sdong
Subscribers: ljin, igor
Differential Revision: https://reviews.facebook.net/D20913
Summary:
Fixed the crash when merge_operator is not properly set after reopen
and added two test cases for this.
Test Plan:
make merge_test
./merge_test
Reviewers: igor, ljin, sdong
Reviewed By: sdong
Subscribers: benj, mvikjord, leveldb
Differential Revision: https://reviews.facebook.net/D20793
Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.
Test Plan: db_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19425
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:
(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.
The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D18933
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
includes necessary changes such as updating the pure C api for
partial merge.
Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
operands.
TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.
Reviewers: haobo, igor, vamsi
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16815
Summary:
Previous I am too ambitious to hide every detail about table factory
to internal api. However, we cannot pass the compilatoin for external
users since we use table factory as the shared_ptr, which requires
the definition of table factory's destructor.
Test Plan: make check;
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15861
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15489
Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().
We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.
Test Plan: add a test case in db_test
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D15039
Summary:
Code was always compressing L0 files written by a memtable flush
when compression was enabled. Now this is done when
min_level_to_compress=0 for leveled compaction and when
universal_compaction_size_percent=-1 for universal compaction.
Task ID: #3416472
Blame Rev:
Test Plan:
ran db_bench with compression options
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba, igor, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14757
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test
Test Plan: pass test suites.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13785
Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.
Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.
Reviewers: dhruba, haobo, kailiu, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13521
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test
Reviewers: haobo, emayanke
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D12381
Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.
I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.
This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.
NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!
Test Plan:
-This is a preliminary diff. I have only just begun testing/debugging it.
-I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
-I will be "desk-checking" and walking through the code with the help gdb.
-I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
-I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
-A lot of feedback from the reviewers.
Reviewers: haobo, dhruba, zshao, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11499
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary:
Rocks accumulates recent writes and deletes in the in-memory memtable.
When the memtable is full, it writes the contents on the memtable to
a file in L0.
This patch removes redundant records at the time of the flush. If there
are multiple versions of the same key in the memtable, then only the
most recent one is dumped into the output file. The purging of
redundant records occur only if the most recent snapshot is earlier
than the earliest record in the memtable.
Should we switch on this feature by default or should we keep this feature
turned off in the default settings?
Test Plan: Added test case to db_test.cc
Reviewers: sheki, vamsi, emayanke, heyongqiang
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8991
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
The leveldb API is enhanced to support different compression algorithms at
different levels.
This adds the option min_level_to_compress to db_bench that specifies
the minimum level for which compression should be done when
compression is enabled. This can be used to disable compression for levels
0 and 1 which are likely to suffer from stalls because of the CPU load
for memtable flushes and (L0,L1) compaction. Level 0 is special as it
gets frequent memtable flushes. Level 1 is special as it frequently
gets all:all file compactions between it and level 0. But all other levels
could be the same. For any level N where N > 1, the rate of sequential
IO for that level should be the same. The last level is the
exception because it might not be full and because files from it are
not read to compact with the next larger level.
The same amount of time will be spent doing compaction at any
level N excluding N=0, 1 or the last level. By this standard all
of those levels should use the same compression. The difference is that
the loss (using more disk space) from a faster compression algorithm
is less significant for N=2 than for N=3. So we might be willing to
trade disk space for faster write rates with no compression
for L0 and L1, snappy for L2, zlib for L3. Using a faster compression
algorithm for the mid levels also allows us to reclaim some cpu
without trading off much loss in disk space overhead.
Also note that little is to be gained by compressing levels 0 and 1. For
a 4-level tree they account for 10% of the data. For a 5-level tree they
account for 1% of the data.
With compression enabled:
* memtable flush rate is ~18MB/second
* (L0,L1) compaction rate is ~30MB/second
With compression enabled but min_level_to_compress=2
* memtable flush rate is ~320MB/second
* (L0,L1) compaction rate is ~560MB/second
This practicaly takes the same code from https://reviews.facebook.net/D6225
but makes the leveldb api more general purpose with a few additional
lines of code.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6261
Summary:
Introduce a new method Env->Fsync() that issues fsync (instead of fdatasync).
This is needed for data durability when running on ext3 filesystems.
Added options to the benchmark db_bench to generate performance numbers
with either fsync or fdatasync enabled.
Cleaned up Makefile to build leveldb_shell only when building the thrift
leveldb server.
Test Plan: build and run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4911
