Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Introduce `JemallocNodumpAllocator`, which allow exclusion of block cache usage from core dump. It utilize custom hook of jemalloc arena, and when jemalloc arena request memory from system, the allocator use the hook to set `MADV_DONTDUMP ` to the memory. The implementation is basically the same as `folly::JemallocNodumpAllocator`, except for some minor difference:
1. It only support jemalloc >= 5.0
2. When the allocator destruct, it explicitly destruct the corresponding arena via `arena.<i>.destroy` via `mallctl`.
Depending on #4502.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4534
Differential Revision: D10435474
Pulled By: yiwu-arbug
fbshipit-source-id: e80edea755d3853182485d2be710376384ce0bb4
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
Set the macro if default allocator is jemalloc. It doesn't handle the case when allocator is specified, e.g.
```
cpp_binary(
name="xxx"
allocator="jemalloc", # or "malloc" or something else
deps=["//rocksdb:rocksdb"],
)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4489
Differential Revision: D10363683
Pulled By: yiwu-arbug
fbshipit-source-id: 5da490336a8e78e0feb0900c29e8036e7ec6f12b
Summary:
Introduce `RepeatableThread` utility to run task periodically in a separate thread. It is basically the same as the the same class in fbcode, and in addition provide a helper method to let tests mock time and trigger execution one at a time.
We can use this class to replace `TimerQueue` in #4382 and `BlobDB`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4423
Differential Revision: D10020932
Pulled By: yiwu-arbug
fbshipit-source-id: 3616bef108c39a33c92eedb1256de424b7c04087
Summary:
To measure the results of upcoming DeleteRange v2 work, this commit adds
simple benchmarks for RangeDelAggregator. It measures the average time
for AddTombstones and ShouldDelete calls.
Using this to compare the results before #4014 and on the latest master (using the default arguments) produces the following results:
Before #4014:
```
=======================
Results:
=======================
AddTombstones: 1356.28 us
ShouldDelete: 0.401732 us
```
Latest master:
```
=======================
Results:
=======================
AddTombstones: 740.82 us
ShouldDelete: 0.383271 us
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4363
Differential Revision: D9881676
Pulled By: abhimadan
fbshipit-source-id: 793e7d61aa4b9d47eb917bbcc03f08695b5e5442
Summary:
Including tools/trace_analyzer_tool.cc in rocksdb_lib was causing conflicts in dependent binaries due to duplicate gflag (other_prefix).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4371
Differential Revision: D9846953
Pulled By: anand1976
fbshipit-source-id: 80b4aa36ab8428b8f6dceb896c45532684102709
Summary: There were a few files that were missed when AutoHeaders were moved to their own file. Add explicit loads
Reviewed By: yfeldblum
Differential Revision: D9499942
fbshipit-source-id: 942bf3a683b8961e1b6244136f6337477dcc45af
Summary:
`DB::DiableFileDeletions` and `DB::EnableFileDeletions` are used for applications to stop RocksDB background jobs to delete files while they are doing replication. Implement these methods for BlobDB. `DeleteObsolteFiles` now needs to check `disable_file_deletions_` before starting, and will hold `delete_file_mutex_` the whole time while it is running. `DisableFileDeletions` needs to wait on `delete_file_mutex_` for running `DeleteObsolteFiles` job and set `disable_file_deletions_` flag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4314
Differential Revision: D9501373
Pulled By: yiwu-arbug
fbshipit-source-id: 81064c1228f1724eff46da22b50ff765b16292cd
Summary:
Add hash index support to data blocks, which helps to reduce the CPU utilization of point-lookup operations. This feature is backward compatible with the data block created without the hash index. It is disabled by default unless `BlockBasedTableOptions::data_block_index_type` is set to `data_block_index_type = kDataBlockBinaryAndHash.`
The DB size would be bigger with the hash index option as a hash table is added at the end of each data block. If the hash utilization ratio is 1:1, the space overhead is one byte per key. The hash table utilization ratio is adjustable using `BlockBasedTableOptions::data_block_hash_table_util_ratio`. A lower utilization ratio will improve more on the point-lookup efficiency, but take more space too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4174
Differential Revision: D8965914
Pulled By: fgwu
fbshipit-source-id: 1c6bae5d1fc39c80282d8890a72e9e67bc247198
Summary:
A framework of trace analyzing for RocksDB
After collecting the trace by using the tool of [PR #3837](https://github.com/facebook/rocksdb/pull/3837). User can use the Trace Analyzer to interpret, analyze, and characterize the collected workload.
**Input:**
1. trace file
2. Whole keys space file
**Statistics:**
1. Access count of each operation (Get, Put, Delete, SingleDelete, DeleteRange, Merge) in each column family.
2. Key hotness (access count) of each one
3. Key space separation based on given prefix
4. Key size distribution
5. Value size distribution if appliable
6. Top K accessed keys
7. QPS statistics including the average QPS and peak QPS
8. Top K accessed prefix
9. The query correlation analyzing, output the number of X after Y and the corresponding average time
intervals
**Output:**
1. key access heat map (either in the accessed key space or whole key space)
2. trace sequence file (interpret the raw trace file to line base text file for future use)
3. Time serial (The key space ID and its access time)
4. Key access count distritbution
5. Key size distribution
6. Value size distribution (in each intervals)
7. whole key space separation by the prefix
8. Accessed key space separation by the prefix
9. QPS of each operation and each column family
10. Top K QPS and their accessed prefix range
**Test:**
1. Added the unit test of analyzing Get, Put, Delete, SingleDelete, DeleteRange, Merge
2. Generated the trace and analyze the trace
**Implemented but not tested (due to the limitation of trace_replay):**
1. Analyzing Iterator, supporting Seek() and SeekForPrev() analyzing
2. Analyzing the number of Key found by Get
**Future Work:**
1. Support execution time analyzing of each requests
2. Support cache hit situation and block read situation of Get
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4091
Differential Revision: D9256157
Pulled By: zhichao-cao
fbshipit-source-id: f0ceacb7eedbc43a3eee6e85b76087d7832a8fe6
Summary:
Cleanup TTLExtractor interface. The original purpose of it is to allow our users keep using existing `Write()` interface but allow it to accept TTL via `TTLExtractor`. However the interface is confusing. Will replace it with something like `WriteWithTTL(batch, ttl)` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4229
Differential Revision: D9174390
Pulled By: yiwu-arbug
fbshipit-source-id: 68201703d784408b851336ab4dd9b84188245b2d
Summary:
A framework for tracing and replaying RocksDB operations.
A binary trace file is created by capturing the DB operations, and it can be replayed back at the same rate using db_bench.
- Column-families are supported
- Multi-threaded tracing is supported.
- TraceReader and TraceWriter are exposed to the user, so that tracing to various destinations can be enabled (say, to other messaging/logging services). By default, a FileTraceReader and FileTraceWriter are implemented to capture to a file and replay from it.
- This is not yet ideal to be enabled in production due to large performance overhead, but it can be safely tried out in a shadow setup, say, for analyzing RocksDB operations.
Currently supported DB operations:
- Writes:
-- Put
-- Merge
-- Delete
-- SingleDelete
-- DeleteRange
-- Write
- Reads:
-- Get (point lookups)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3837
Differential Revision: D7974837
Pulled By: sagar0
fbshipit-source-id: 8ec65aaf336504bc1f6ed0feae67f6ed5ef97a72
Summary:
The first step of the `DataBlockHashIndex` implementation. A string based hash table is implemented and unit-tested.
`DataBlockHashIndexBuilder`: `Add()` takes pairs of `<key, restart_index>`, and formats it into a string when `Finish()` is called.
`DataBlockHashIndex`: initialized by the formatted string, and can interpret it as a hash table. Lookup for a key is supported by iterator operation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4139
Reviewed By: sagar0
Differential Revision: D8866764
Pulled By: fgwu
fbshipit-source-id: 7f015f0098632c65979a22898a50424384730b10
Summary:
The member msgs of class Status contains all types of status messages.
When users dump a Status object, msgs will confuse users. So move it out
of class Status by making it as file-local static variable.
Closes#3831 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4144
Differential Revision: D8941419
Pulled By: sagar0
fbshipit-source-id: 56b0510258465ff26db15aa6b04e01532e053e3d
Summary:
Two CI tests never pass because of the environment problem. Delete them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4110
Differential Revision: D8805713
Pulled By: siying
fbshipit-source-id: 6eb4813dc2094ee2045ec8ede7fe8967d546d6e8
Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance
This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997
Differential Revision: D8653831
Pulled By: anand1976
fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd
Summary:
-Wshorten-64-to-32 is invalid flag in fbcode. Changing it to -Warrowing.
Closes https://github.com/facebook/rocksdb/pull/4028
Differential Revision: D8553694
Pulled By: yiwu-arbug
fbshipit-source-id: 1523cbcb4c76cf1d2b10a4d28b5f58c78e6cb876
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
As titled.
I have not extended the Compatibility tests because the new WAL markers are still unimplemented.
Closes https://github.com/facebook/rocksdb/pull/3941
Differential Revision: D8238394
Pulled By: lth
fbshipit-source-id: 980e3d44837bbf2cfa64047f9738f559dfac4b1d
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Some flags used via make were not applied in the buckifier/targets file, causing some failures to be missed by testing infra ( ie the one fixed by #3434 )
Closes https://github.com/facebook/rocksdb/pull/3452
Differential Revision: D7457419
Pulled By: gfosco
fbshipit-source-id: e4aed2915ca3038c1485bbdeebedfc33d5704a49
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
Improving blob db FIFO eviction with the following changes,
* Change blob_dir_size to max_db_size. Take into account SST file size when computing DB size.
* FIFO now only take into account live sst files and live blob files. It is normal for disk usage to go over max_db_size because there are obsolete sst files and blob files pending deletion.
* FIFO eviction now also evict TTL blob files that's still open. It doesn't evict non-TTL blob files.
* If FIFO is triggered, it will pass an expiration and the current sequence number to compaction filter. Compaction filter will then filter inlined keys to evict those with an earlier expiration and smaller sequence number. So call LSM FIFO.
* Compaction filter also filter those blob indexes where corresponding blob file is gone.
* Add an event listener to listen compaction/flush event and update sst file size.
* Implement DB::Close() to make sure base db, as well as event listener and compaction filter, destruct before blob db.
* More blob db statistics around FIFO.
* Fix some locking issue when accessing a blob file.
Closes https://github.com/facebook/rocksdb/pull/3556
Differential Revision: D7139328
Pulled By: yiwu-arbug
fbshipit-source-id: ea5edb07b33dfceacb2682f4789bea61de28bbfa
Summary:
The TSAN version of tests could take quite long. Make the buck tests parallel to avoid timeouts.
Closes https://github.com/facebook/rocksdb/pull/3280
Differential Revision: D6581594
Pulled By: maysamyabandeh
fbshipit-source-id: 3f8476d8c69f0183e394fa8a2089dd8d4e90c90c
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
We're moving away from `import`. The equivalent internal construct that
gets the directory from `fbcode/` is `package_name()`. This is a
Skylark friendly wrapper around [`get_base_path`].
The additional whitespace change is from running `python ./buckifier/buckify_rocksdb.py`.
[`get_base_path`]: https://buckbuild.com/function/get_base_path.html
Closes https://github.com/facebook/rocksdb/pull/3210
Reviewed By: yiwu-arbug
Differential Revision: D6451242
Pulled By: zertosh
fbshipit-source-id: 445757261de0ec89d5d332c1ba9af097086326dc
Summary:
Do not build the tests in opt mode, since SyncPoint and other test code will not be included.
Closes https://github.com/facebook/rocksdb/pull/3204
Differential Revision: D6431154
Pulled By: yiwu-arbug
fbshipit-source-id: c404ef042c1a6f679e5c1dc57600b3d8cb52fc28
Summary:
The current implementation of PinnableSlice move assignment have an issue #3163. We are moving away from it instead of try to get the move assignment right, since it is too tricky.
Closes https://github.com/facebook/rocksdb/pull/3164
Differential Revision: D6319201
Pulled By: yiwu-arbug
fbshipit-source-id: 8f3279021f3710da4a4caa14fd238ed2df902c48
Summary:
Move WritePreparedTxnDB from pessimistic_transaction_db.h to its own header, write_prepared_txn_db.h
Closes https://github.com/facebook/rocksdb/pull/3114
Differential Revision: D6220987
Pulled By: maysamyabandeh
fbshipit-source-id: 18893fb4fdc6b809fe117dabb544080f9b4a301b
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
This patch splits Commit and Prepare into lock-related logic and db-write-related logic. It moves lock-related logic to PessimisticTransaction to be reused by all children classes and movies the existing impl of db-write-related to PrepareInternal, CommitSingleInternal, and CommitInternal in WriteCommittedTxnImpl.
Closes https://github.com/facebook/rocksdb/pull/2691
Differential Revision: D5569464
Pulled By: maysamyabandeh
fbshipit-source-id: d1b8698e69801a4126c7bc211745d05c636f5325
Summary:
This opens space for the new implementations of TransactionDBImpl such as WritePreparedTxnDBImpl that has a different policy of how to write to DB.
Closes https://github.com/facebook/rocksdb/pull/2689
Differential Revision: D5568918
Pulled By: maysamyabandeh
fbshipit-source-id: f7eac866e175daf3793ae79da108f65cc7dc7b25
Summary:
* Dump blob db options to info log
* Remove BlobDBOptionsImpl to disallow dynamic cast *BlobDBOptions into *BlobDBOptionsImpl. Move options there to be constants or into BlobDBOptions. The dynamic cast is broken after #2645
* Change some of the default options
* Remove blob_db_options.min_blob_size, which is unimplemented. Will implement it soon.
Closes https://github.com/facebook/rocksdb/pull/2671
Differential Revision: D5529912
Pulled By: yiwu-arbug
fbshipit-source-id: dcd58ca981db5bcc7f123b65a0d6f6ae0dc703c7
Summary:
Introducing blob_db::TTLExtractor to replace extract_ttl_fn. The TTL
extractor can be use to extract TTL from keys insert with Put or
WriteBatch. Change over existing extract_ttl_fn are:
* If value is changed, it will be return via std::string* (rather than Slice*). With Slice* the new value has to be part of the existing value. With std::string* the limitation is removed.
* It can optionally return TTL or expiration.
Other changes in this PR:
* replace `std::chrono::system_clock` with `Env::NowMicros` so that I can mock time in tests.
* add several TTL tests.
* other minor naming change.
Closes https://github.com/facebook/rocksdb/pull/2659
Differential Revision: D5512627
Pulled By: yiwu-arbug
fbshipit-source-id: 0dfcb00d74d060b8534c6130c808e4d5d0a54440
Summary: These are implied by default platform flags, in particular, `-march=corei7`.
Reviewed By: pixelb
Differential Revision: D5485414
fbshipit-source-id: 85f1329c71fa81a604760844187cc73877fb40e9
Summary:
simply enable the macro in internal build, it wont hurt other sanitizers and will fix UBSAN issues
Closes https://github.com/facebook/rocksdb/pull/2625
Differential Revision: D5475897
Pulled By: IslamAbdelRahman
fbshipit-source-id: 262c6fd5de3c1906f4b29e55b39110f125f41057
Summary:
Major changes in this PR:
* Implement CassandraCompactionFilter to remove expired columns and rows (if all column expired)
* Move cassandra related code from utilities/merge_operators/cassandra to utilities/cassandra/*
* Switch to use shared_ptr<> from uniqu_ptr for Column membership management in RowValue. Since columns do have multiple owners in Merge and GC process, use shared_ptr helps make RowValue immutable.
* Rename cassandra_merge_test to cassandra_functional_test and add two TTL compaction related tests there.
Closes https://github.com/facebook/rocksdb/pull/2588
Differential Revision: D5430010
Pulled By: wpc
fbshipit-source-id: 9566c21e06de17491d486a68c70f52d501f27687
Summary:
Instead of hard coding the path of the internal repo.
Make TARGETS file work anywhere in fbcode
Closes https://github.com/facebook/rocksdb/pull/2586
Differential Revision: D5428122
Pulled By: IslamAbdelRahman
fbshipit-source-id: 21adec82bfbff14ea93532bee789b5f5bbee5b01
Summary:
Instead of ignoring UBSan checks, fix the negative shifts in
Hash(). Also add test to make sure the hash values are stable over
time. The values were computed before this change, so the test also
verifies the correctness of the change.
Closes https://github.com/facebook/rocksdb/pull/2546
Differential Revision: D5386369
Pulled By: yiwu-arbug
fbshipit-source-id: 6de4b44461a544d6222cc5d72d8cda2c0373d17e
Summary:
1. The buckifier script assume each test "foo" comes with a .cc file of the same name (i.e. foo.cc). Update cassandra tests to follow this pattern so that the buckifier script can recognize them.
2. add blob_db_test
Closes https://github.com/facebook/rocksdb/pull/2506
Differential Revision: D5331517
Pulled By: yiwu-arbug
fbshipit-source-id: 86f3eba471fc621186ab44cbd073b6162cde8e57
Summary:
This PR adds support for encrypting data stored by RocksDB when written to disk.
It adds an `EncryptedEnv` override of the `Env` class with matching overrides for sequential&random access files.
The encryption itself is done through a configurable `EncryptionProvider`. This class creates is asked to create `BlockAccessCipherStream` for a file. This is where the actual encryption/decryption is being done.
Currently there is a Counter mode implementation of `BlockAccessCipherStream` with a `ROT13` block cipher (NOTE the `ROT13` is for demo purposes only!!).
The Counter operation mode uses an initial counter & random initialization vector (IV).
Both are created randomly for each file and stored in a 4K (default size) block that is prefixed to that file. The `EncryptedEnv` implementation is such that clients of the `Env` class do not see this prefix (nor data, nor in filesize).
The largest part of the prefix block is also encrypted, and there is room left for implementation specific settings/values/keys in there.
To test the encryption, the `DBTestBase` class has been extended to consider a new environment variable called `ENCRYPTED_ENV`. If set, the test will setup a encrypted instance of the `Env` class to use for all tests.
Typically you would run it like this:
```
ENCRYPTED_ENV=1 make check_some
```
There is also an added test that checks that some data inserted into the database is or is not "visible" on disk. With `ENCRYPTED_ENV` active it must not find plain text strings, with `ENCRYPTED_ENV` unset, it must find the plain text strings.
Closes https://github.com/facebook/rocksdb/pull/2424
Differential Revision: D5322178
Pulled By: sdwilsh
fbshipit-source-id: 253b0a9c2c498cc98f580df7f2623cbf7678a27f
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350
Differential Revision: D5110648
Pulled By: siying
fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
Summary:
This is a manual commit of this PR:
Retire InMemoryEnv in favor of MockEnv #2082
With MockEnv doing the same yet being more mature, InMemoryEnv is redundant.
Reviewed By: IslamAbdelRahman
Differential Revision: D5162323
fbshipit-source-id: 59fd0082a891dc99cc531e4da9d68bf891eae3f5
Summary:
This fixes a compilation failure on Linux when the system libc is not
glibc. jemalloc's configure script incorrectly assumes that glibc is
always used on Linux systems, producing glibc-style signatures; when
the system libc is e.g. musl, the following error is observed:
```
[ 0%] Building CXX object CMakeFiles/rocksdb.dir/db/db_impl.cc.o
In file included from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/table/block.h:19:0,
from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/db/db_impl.cc:77:
/x-tools/x86_64-unknown-linux-musl/x86_64-unknown-linux-musl/sysroot/usr/include/malloc.h:19:8: error: declaration of 'size_t malloc_usable_size(void*)' has a different exception specifier
size_t malloc_usable_size(void *);
^~~~~~~~~~~~~~~~~~
In file included from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/db/db_impl.cc:20:0:
/go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:78:33: note: from previous declaration 'size_t malloc_usable_size(void*) throw ()'
# define je_malloc_usable_size malloc_usable_size
^
/go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:239:41: note: in expansion of macro 'je_malloc_usable_size'
JEMALLOC_EXPORT size_t JEMALLOC_NOTHROW je_malloc_usable_size(
^~~~~~~~~~~~~~~~~~~~~
CMakeFiles/rocksdb.dir/build.make:350: recipe for target 'CMakeFiles/rocksdb.dir/db/db_impl.cc.o' failed
```
This works around the issue by rearranging the sources such that
jemalloc's headers are never in the same scope as the system's malloc
header. The jemalloc issue has been reported as well, see:
https://github.com/jemalloc/jemalloc/issues/778.
cc tschottdorf
Closes https://github.com/facebook/rocksdb/pull/2188
Differential Revision: D5163048
Pulled By: siying
fbshipit-source-id: c553125458892def175c1be5682b0330d80b2a0d
Summary:
Blob db rely on base db returning sequence number through write batch after DB::Write(). However after recent changes to the write path, DB::Writ()e no longer return sequence number in some cases. Fixing it by have WriteBatchInternal::InsertInto() always encode sequence number into write batch.
Stacking on #2375.
Closes https://github.com/facebook/rocksdb/pull/2385
Differential Revision: D5148358
Pulled By: yiwu-arbug
fbshipit-source-id: 8bda0aa07b9334ed03ed381548b39d167dc20c33
Summary:
Re-enable blob_db_test with some update:
* Commented out delay at the end of GC tests. Will update the logic later with sync point to properly trigger GC.
* Added some helper functions.
Also update make files to include blob_dump tool.
Closes https://github.com/facebook/rocksdb/pull/2375
Differential Revision: D5133793
Pulled By: yiwu-arbug
fbshipit-source-id: 95470b26d0c1f9592ba4b7637e027fdd263f425c
Summary:
We've had a couple CockroachDB users fail to build RocksDB on exotic platforms, so I figured I'd try my hand at solving these issues upstream. The problems stem from a) `USE_SSE=1` being too aggressive about turning on SSE4.2, even on toolchains that don't support SSE4.2 and b) RocksDB attempting to detect support for thread-local storage based on OS, even though it can vary by compiler on the same OS.
See the individual commit messages for details. Regarding SSE support, this PR should change virtually nothing for non-CMake based builds. `make`, `PORTABLE=1 make`, `USE_SSE=1 make`, and `PORTABLE=1 USE_SSE=1 make` function exactly as before, except that SSE support will be automatically disabled when a simple SSE4.2-using test program fails to compile, as it does on OpenBSD. (OpenBSD's ports GCC supports SSE4.2, but its binutils do not, so `__SSE_4_2__` is defined but an SSE4.2-using program will fail to assemble.) A warning is emitted in this case. The CMake build is modified to support the same set of options, except that `USE_SSE` is spelled `FORCE_SSE42` because `USE_SSE` is rather useless now that we can automatically detect SSE support, and I figure changing options in the CMake build is less disruptive than changing the non-CMake build.
I've tested these changes on all the platforms I can get my hands on (macOS, Windows MSVC, Windows MinGW, and OpenBSD) and it all works splendidly. Let me know if there's anything you object to—I obviously don't mean to break any of your build pipelines in the process of fixing ours downstream.
Closes https://github.com/facebook/rocksdb/pull/2199
Differential Revision: D5054042
Pulled By: yiwu-arbug
fbshipit-source-id: 938e1fc665c049c02ae15698e1409155b8e72171
Summary:
snprintf is in <stdio.h> and not in namespace std.
Closes https://github.com/facebook/rocksdb/pull/2287
Reviewed By: anirbanr-fb
Differential Revision: D5054752
Pulled By: yiwu-arbug
fbshipit-source-id: 356807ec38f3c7d95951cdb41f31a3d3ae0714d4
Summary:
- Introduced an include/ file dedicated to db-related debug functions to avoid making db.h more complex
- Added debugging function, `GetAllKeyVersions()`, to return a listing of internal data for a range of user keys. The new `struct KeyVersion` exposes data similar to internal key without exposing any internal type.
- Migrated the "ldb idump" subcommand to use this function
- The API takes an inclusive-exclusive range to match behavior of "ldb idump". This will be quite annoying for users who want to query a single user key's versions :(.
Closes https://github.com/facebook/rocksdb/pull/2232
Differential Revision: D4976007
Pulled By: ajkr
fbshipit-source-id: cab375da53a7595d6575af2b7e3b776aa3ad793e
Summary:
- added a feature test in build_detect_platform to check whether sched_getcpu() is available. glibc offers it only on some platforms (e.g., linux but not mac); this way should be easier than maintaining a list of platforms on which it's available.
- refactored PhysicalCoreID() to be simpler / less repetitive. ordered the conditional compilation clauses from most-to-least preferred
Closes https://github.com/facebook/rocksdb/pull/2272
Differential Revision: D5038093
Pulled By: ajkr
fbshipit-source-id: 81d7db3cc620250de220bdeb3194b2b3d7673de7
Summary:
I'm going to add more DB tests for statistics as currently we have very few. I started a file dedicated to this purpose and moved the existing stats-specific tests there.
Closes https://github.com/facebook/rocksdb/pull/2211
Differential Revision: D4951558
Pulled By: ajkr
fbshipit-source-id: 05d11c35079c40ecabdfd2cf5556ccb761f694a4
Summary:
These code paths forked when checkpoint was introduced by copy/pasting the core backup logic. Over time they diverged and bug fixes were sometimes applied to one but not the other (like fix to include all relevant WALs for 2PC), or it required extra effort to fix both (like fix to forge CURRENT file). This diff reunites the code paths by extracting the core logic into a function, CreateCustomCheckpoint(), that is customizable via callbacks to implement both checkpoint and backup.
Related changes:
- flush_before_backup is now forcibly enabled when 2PC is enabled
- Extracted CheckpointImpl class definition into a header file. This is so the function, CreateCustomCheckpoint(), can be called by internal rocksdb code but not exposed to users.
- Implemented more functions in DummyDB/DummyLogFile (in backupable_db_test.cc) that are used by CreateCustomCheckpoint().
Closes https://github.com/facebook/rocksdb/pull/1932
Differential Revision: D4622986
Pulled By: ajkr
fbshipit-source-id: 157723884236ee3999a682673b64f7457a7a0d87
